Synthesis and characterization of pH-sensitivity semi-IPN hydrogel based on hydrogen bond between poly(N-vinylpyrrolidone) and poly(acrylic acid)

A novel spherically shaped semi-interpenetrating network (semi-IPN) hydrogel, which is based on hydrogen bond between chemical crosslinked poly(N-vinylpyrrolidone) (PVP) and linear poly(acrylic acid) (PAA), was prepared. The semi-IPN hydrogel was synthesized by three steps: (1) linear PAA with different molecular weights were obtained by a reaction of free radical polymerization used 2,2′-azo-bis-iso-butyronitrile (AIBN) as an initiator; (2) crosslinked PVP bead was obtained by a reaction of N-vinylpyrrolidone with AIBN used as an initiator and N,N′-methylene-bis-acrylamide (NNMBA) used as a crosslinker by the way of suspension polymerization; (3) complexation occurred between suitable amount of aqueous solution of PAA and the porous PVP bead and was stabilized by multiple frost-defrost, from this step the semi-IPN hydrogel was obtained. Fourier transform infrared spectroscopy (FTIR) and differential scanning calorimetry (DSC) proved the presence of the hydrogen bond in the hydrogel. The swelling behaviour of the hydrogel was studied in buffer solution with different pH and NaCl aqueous solution. The results showed that the semi-IPN hydrogel had excellent pH-sensitivity in the range of pH from 2.25 to 4.00 and the small molecule salt had little influence on the swelling behaviour of the semi-IPN hydrogel over the range of concentration of NaCl aqueous solution investigated. The results were confirmed further by scanning electron microscope (SEM). The mechanism of swelling and deswelling was discussed.     

Salt-, pH- and temperature-responsive semi-interpenetrating polymer network hydrogel based on poly(aspartic acid) and poly(acrylic acid)

In this study, a novel salt-, pH- and temperature-responsive semi-interpenetrating network (semi-IPN) hydrogel, composed of poly(aspartic acid) (PAsp) and poly(acrylic acid) (PAAc), was prepared. PAsp/PAAc semi-IPN hydrogel being ionic in nature, the swelling behavior was significantly influenced by various swelling medium. The structure of the triply responsive hydrogel was studied by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM), and the salt-, temperature- and pH-sensitivities were investigated through measuring equilibrium swelling ratios in various environmental solutions. The results indicate that there is a structure of polyelectrolyte complex in the hydrogel, and that the responsive behaviors of this hydrogel to alternating changes in inorganic salt (different physiological bio-fluids), pH and temperature are improved because of the incorporation of PAsp. In addition, during the repeatable swelling and shrinkage period, the semi-IPN hydrogel shows suitable mechanical strength. The salt-, pH- and temperature-responsive hydrogel will have wider applications in biomedical areas.     

具有pH及温度敏感性的共聚物Poly(NIPAm-co-IA)水凝胶的合成及其性能研究

用自由基聚合合成了具有两水亲性的异丙基丙烯酰胺与衣康酸共聚物 ,对它们水溶液及其水凝胶的 p H及温敏性进行了研究。结果表明 ,在一定的范围内 ,随衣康酸含量增加、水溶液浓度减少和 p H值增大 ,共聚物水溶液的低临界溶解温度随之升高。共聚物水凝胶的溶胀率随温度升高呈下降趋势 ,并且 p H值低时的溶胀率随温度的升高而下降的趋势比 p H高时的要快 ,而且表现出明显的溶胀 -退胀可逆过程。     

Characterization of Poly(Vinyl Alcohol) and Poly(Vinyl Pyrrolidone) Co-polymer Blend Hydrogel Prepared by Application of Gamma Radiation

Hydrogel is prepared from a poly(vinyl pyrrolidone) (PVP) and poly(vinyl alcohol) (PVA) blend solution by gamma radiation with a ₆₀Co λ source at room temperature. Properties of the prepared hydrogel, such as gel fraction, gel strength swelling ratio, equilibrium water content, and water absorption in room temperature, were investigated. Blending hydrogel with PVP and PVA obviously increased the gel strength and decreased the swelling ratio of hydrogel. It was observed that the gel fraction increased while the swelling ratio and water content decreased with increased radiation dose, but gel strength increased up to a certain radiation dose and then decreased. The percentage of water absorption at room temperature increased with time but after a certain time it became steady and decreased with radiation dose.     

Poly(N-vinylpyrrolidone)-grafted poly(N-isopropylacrylamide) copolymers: Synthesis, characterization and rapid deswelling and reswelling behavior of hydrogels

Poly(N-isopropylacrylamide)-block-poly(N-vinylpyrrolidone) diblock copolymer (PNIPAAm-b-PVPy) was successfully synthesized via sequential reversible addition-fragmentation chain transfer/macromolecular design via the interchange of xanthate (RAFT/MADIX) process, in which the chain transfer agent of xanthate was in situ afforded via the reaction of isopropylxanthic disulfide (DIP) with 2,2-azobisisobutylnitrile (AIBN). The RAFT/MADIX technique was employed to prepare the poly(N-vinylpyrrolidone)-grafted poly(N-isopropylacrylamide) copolymers (PNIPAAm-g-PVPy) with N,N-methylenebisacrylamide as the crosslinking agent. The comb-like PNIPAAm-g-PVPy copolymer networks with PVPy as the pendent chains were characterized by means of Fourier transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC) and small angle X-ray scattering (SAXS). The hydrogel behavior of PNIPAAm-g-PVPy networks was investigated in terms of swelling, deswelling and reswelling tests. With the inclusion of PVPy chains, the swelling ratios of the hydrogels were significantly enhanced compared to the control PNIPAAm hydrogel. It is found that the PVPy-modified PNIPAAm hydrogels displayed faster response to the external temperature changes than the control PNIPAAm hydrogel. The improved thermoresponsive properties of hydrogels are ascribed to the formation of the comb-like architectures in the copolymer networks.     

Structure and swelling of poly(acrylic acid) hydrogels: effect of pH, ionic strength, and dilution on the crosslinked polymer structure

The network formation of crosslinked polymer hydrogels made via a free radical polymerization mechanism is significantly influenced by the polymerization conditions. In particular, the crosslinked structure of ionic networks like poly(acrylic acid) copolymers is affected by the monomer concentration, the pH, and ionic strength during the polymerization. In this work experimental data as well as theoretical analysis are used to investigate how these factors control the degree of crosslinking and primary cyclization during the network formation of multifunctional monomers. It was found that the amount of water present during the polymerization increases primary cyclization rates, and this change affects the subsequent swelling behavior of the acrylic acid hydrogel. The effects of ionic strength and pH on the network structure are interrelated. An increase in the pH decreases the degree of primary cyclization while an increase in the ionic strength increases cyclization. To investigate further the effect of pH, a cationic polymer was formed that contained a monovinyl amine monomer and a novel diamine crosslinking agent synthesized in our laboratory. The combined effect of the ionizing backbone chain and crosslinking agent cause the degree of primary cyclization in this material to be extremely sensitive to the pH during polymerization. This result confirms the significant role of pH on the network formation in ionic materials.     

pH sensitivity and swelling behavior of partially hydrolyzed formaldehyde-crosslinked poly(acrylamide) superabsorbent hydrogels

Poly(acrylamide) superabsorbent hydrogel was synthesized through crosslinking method. Formaldehyde was used as a crosslinking agent. To achieve a hydrogel with high swelling capacity, the resulted hydrogels were saponified using NaOH solution at high temperature. During saponification, ammonia gas is produced from hydrolysis reaction of amide groups. The arising of ammonia produces porous structure in hydrogels, which is confirmed using scanning electron microscopy. The conversion of amide groups to carboxylate groups was identified by FTIR spectroscopy. The reaction variables in both crosslinking and hydrolysis reactions that affect the swelling of hydrogels were optimized. The swelling of the hydrogels in various salt solutions with various valencies and radii was studied. Also, the absorbency under load was measured. The hydrogels exhibited pH-sensitivity characteristics. A sharp swelling change was observed in lieu of pH variations in a wide range (1–13). The swelling variations were explained according to the swelling theory based on the hydrogel chemical structure. The pH-reversibility and on–off switching behavior makes the intelligent hydrogels as good candidates for considering as potential drug carries. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Gamma radiation synthesis and swelling properties of hydrogels based on poly(ethylene glycol)/methacrylic acid (MAc) mixtures

In this work, gamma radiation was used to prepare hydrophilic hydrogels based on different mass ratios of poly(ethylene glycol) (PEG) and methacrylic acid (MAc) monomer. The thermal stability of hydrogels was characterized thermogravimetric analysis (TGA). The effect of temperature and pH, as external environments, on the equilibrium swelling of PEG/MAc hydrogels was also studied. The results showed that the gel fraction of PEG/MAc hydrogels is lower than that of PMAc hydrogel, in which the gel fraction of PMAc hydrogel was decreased greatly with increasing the mass ratio of PEG polymer in the initial solutions. The results showed that PEG/MAc hydrogels reached the equilibrium swelling state in water after 6 hours. It was found that the equilibrium swelling of PEG/MAc hydrogels displayed a transition change within the temperature range 30–40°C. This change in equilibrium swelling was illustrated by differential scanning calorimetry (DSC). However, it was observed that the equilibrium swelling of PEG/MAc hydrogels increases progressively with increasing the pH value from 4 up to 8. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Proton exchange membranes based on poly(vinylidene fluoride) and sulfonated poly(ether ether ketone)

Blend membranes were obtained by solution casting from poly(vinylidene fluoride) (PVDF) and sulfonated poly(ether ether ketone) (SPEEK) in N,N-dimethylacetamide (DMAc). DSC and XRD were used to characterize the structure of the blend membranes. The effect of PVDF content on the membrane properties was investigated. The methanol permeability, water uptake and the swelling ratio of blend membranes decreased with the increase of PVDF content. Though the proton conductivity decreased upon the addition of PVDF, they were still comparable to that of Nafion^® 117 membrane. Higher selectivities were also found for most blend membranes in comparison with Nafion^® 117 membrane. The effect of methanol concentration on solution uptake, swelling ratio and methanol permeability of the blend membranes was also studied.     

Network parameters and volume phase transition behavior of poly(N‐isopropylacrylamide) hydrogels

Thermosensitive hydrogels were prepared by free radical polymerization in aqueous solution from N‐isopropylacrylamide (NIPA) monomer and N,N‐methylenebis(acrylamide) (MBAAm) crosslinker. The swelling equilibrium of the hydrogels in deionized water was investigated as a function of temperature and MBAAm content. The results indicated that the swelling behavior and temperature sensitivity of the hydrogels were affected by the amount of MBAAm content. The average molecular mass between crosslinks and polymer–solvent interaction parameter (χ) of the hydrogels were determined from equilibrium swelling values. The swelling variations were explained according to swelling theory based on the hydrogel chemical structure. The swelling equilibrium of the hydrogels was also investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). In deionized water, the hydrogels showed a discontinuous volume phase transition at 32°C. In SDS and DTAB solutions, the equilibrium swelling ratio and the volume phase transition temperature (lower critical solution temperature) of the hydrogels increased, which is ascribed to the conversion of nonionic PNIPA hydrogel into polyelectrolyte hydrogels because of binding of surfactant molecules through the hydrophobic interaction. Additionally, the amount of free SDS and DTAB ions was measured at different temperatures by a conductometric method; it was found that the electric conductivity of the PNIPA–surfactant systems depended strongly on both the type and concentration of surfactant solutions. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 1756–1762, 2006     

Synthesis and swelling properties of pH‐sensitive hydrogels based on chitosan and poly(methacrylic acid) semi‐interpenetrating polymer network

A novel semi‐interpenetrating polymer network (semi‐IPN) hydrogel composed of chitosan and poly(methacrylic acid) was synthesized using formaldehyde as a crosslinker. The amount of crosslinker was searched and optimized. The structure of the hydogel was investigated by Fourier transform infrared (FTIR) spectroscopy. The spectrum shows that a structure of polyelectrolyte complex exists in the hydrogel. The effects of pH, ionic strength, and inorganic salt on the swelling behaviors of the hydrogel were studied. The results indicate the hydrogel has excellent pH sensitivity in the range of pH 1.40 to 4.50, pH reversible response between pH 1.80 and 6.80, and ionic strength reversible response between ionic strength 0.2 and 2.0M. The results also show that the hydrogel has a bit higher swelling capacity in a mix solution of calcium chloride (CaCl₂) and hydrochloric acid (HCl) solution than in a mix solution of sodium chloride (NaCl) and HCl. These results were further confirmed through morphological change measured by scanning electron microscope (SEM). © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 1720–1726, 2005     

Influence of the swelling history on the swelling kinetics of stimuli-responsive poly[(N-isopropylacrylamide)-co-(methacrylic acid)] hydrogels

The influence of the swelling history on the swelling behavior of poly[(N-isopropylacrylamide)-co-(methacrylic acid)] P[(N-iPAAm)-co-(MAA)] random copolymers hydrogels synthesized by free radical polymerization in solution of N-iPAAm and MAA comonomers crosslinked with tetraethylene glycol dimethyl acrylate (TEGDMA) has been studied. The swelling behavior under pH 7 at 18, 29, 39 and 49 °C of this series of copolymers, previously soaked either at pH 2 or 7 has been investigated. The swelling kinetics of these two series of samples displays different behavior as function of the composition and temperature. However, the equilibrium swelling values only show slight dependences on the previous soaking pH and temperature. When samples are soaked at pH 7, then the swelling at pH 7 follows a first order kinetics, irrespective of the copolymer composition or the temperature at which the experiment has been carried out. In this case, the swelling process is very fast and depends only slightly on temperature. The first order rate constant increases with the MAA content in the hydrogel. Furthermore, the swelling rate of copolymer hydrogels soaked at pH 2, show strong dependence on composition and temperature. They follow an autocatalytic swelling kinetics due to the disruption of hydrogen bond arrangements. An initial slow water uptake is followed by an acceleration process, in which water molecules inside the gel help the next water molecules to come in. Two rate constants, a first-order rate constant and an autocatalytic one have been obtained from the kinetics analysis. They have revealed different temperature dependence which may be due to a balance between hydrophobic and hydrogen bond interactions. The temperature dependence of the swelling kinetics is stronger and more complex for copolymers treated under pH 2 than for copolymers soaked under pH 7.     

Ultra-fine polyelectrolyte fibers from electrospinning of poly(acrylic acid)

Ultra-fine polyelectrolyte fibers have been generated from electrospinning of poly(acrylic acid) in aqueous and DMF solutions. The fiber diameters ranged from 80 to 500 nm and increased with increasing solution concentrations and electrospinning voltages. The fibers generated from the aqueous solutions were more homogeneous in sizes, especially when NaCl or NaOH was added. Higher voltages in electrospinning of the aqueous solutions also resulted in fibers with larger heat capacity in the glass transition region, and higher dehydration temperatures. These polyelectrolyte fibers could be rendered water-insoluble by incorporating β-cyclodextrin (at 20 wt% of PAA) in the aqueous solution, then heat-induced crosslinking was performed at 140 °C for 20 min. The resulting hydrogel fibers showed strongly pH-responsive swelling behaviors.     

Intermolecular interaction in aqueous solution of binary blends of poly(acrylamide) and poly(ethylene glycol)

The interaction between poly(acrylamide) (PAM) and poly(ethylene glycol) (PEG) in their solid mixture was studied by Fourier transform infrared spectroscopy (FTIR); and their interaction in aqueous solution was investigated by nuclear magnetic resonance spectroscopy (NMR). For the solid PAM/PEG mixtures, an induced shift of the >C?O and >N? H in amide group was found by FTIR. These results could demonstrate the formation of intermolecular hydrogen bonding between the amide group of PAM and the ether group of PEG. In the aqueous PAM/PEG solution system, the PAM and PEG associating with each other in water, i.e., the amide group of PAM interacting with the ether group of PEG through hydrogen bonding was also found by ¹H NMR. Furthermore, the effects of different molecular weight of PAM on the strength of hydrogen bonding between PAM and PEG in water were investigated systemically. It was found that the hydrogen bonding interaction between PAM and PEG in water did not increase with the enlargement of the PAM molecular weight as expected. This finding together with the viscosity reduction of aqueous PAM/PEG solution with the PAM molecular weight increasing strongly indicated that PAM molecular chain, especially having high molecular weights preferred to form spherical clews in aqueous PEG solution. Therefore, fewer amide groups in PAM could interact with the ether groups in PEG. Based on these results, a mechanism sketch of the interaction between PAM and PEG in relatively concentrated aqueous solution was proposed. The fact that the phase separation of aqueous PAM/PEG solution occurs while raising the temperature indicates that this kind of hydrogen bonding between PAM and PEG in water is weak and could be broken by controlling the temperature. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

The swelling behaviors and network parameters of cationic starch‐g‐acrylic acid/poly(dimethyldiallylammonium chloride) semi‐interpenetrating polymer networks hydrogels

Amphiphilic semi‐interpenetrating polymer networks (semi‐IPN) hydrogels were prepared by a sequential‐IPN method by acrylic acid graft copolymerization into cationic starch in mild aqueous media of poly(dimethyldiallylammonium chloride). Some main factors were investigated to evaluate the swelling of hydrogels, and the network parameters M_c were given accordingly to elaborate the interaction between polymers. The chemical structure of the resulting hydrogel was confirmed using Fourier transform infrared spectroscopy. The cationic starch‐based semi‐IPN hydrogels achieved a high swelling capacity of 1070 g/g in deionized water and 94 g/g in 0.9 wt % NaCl solution, respectively) and high compressive stress in a high water content. Besides, a different pH‐dependent behavior was found for this semi‐IPN hydrogel. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Electrical sensitivity behavior of a hydrogel composed of polymethacrylic acid/poly(vinyl alcohol)

An interpenetrating polymer network (IPN) composed of polymethacrylic acid (PMAA) and poly(vinyl alcohol) (PVA) was prepared and exhibited electrical sensitivity behavior. The swelling behavior of the PMAA/PVA IPN hydrogel was studied by immersion of the gel in aqueous NaCl solutions at various concentrations and pH values. The stimuli response of the PMAA/PVA IPN hydrogel in electric fields was also investigated. When swollen IPN hydrogel was placed between a pair of electrodes, the PMAA/PVA IPN hydrogel exhibited bending behavior upon the application of an electric field. The PMAA/PVA IPN hydrogel also showed stepwise bending behavior depending on the electric stimulus. Also, for biomedical applications, the bending behavior of PMAA/PVA IPN hydrogel in Hank's solution at pH 7.4 was studied. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 91:3613–3617, 2004     

Electric double layer capacitors with polymer hydrogel electrolyte based on poly(acrylamide) and modified electrode and separator materials

Activated carbon fiber cloths (AC) and hydrophobic microporous polypropylene (PP) membrane, both modified by acetone aldol condensation products, and filled with polymer hydrogel were used as electrodes, separator and electrolyte in electric double layer capacitors (EDLCs). Polymer hydrogel used was based on poly(acrylamide) (PAAM), KOH and water. Electrochemical characteristics of EDLCs were investigated by cyclic voltammetry and galvanostatic charge–discharge cycle tests and also by impedance spectroscopy, compared with a case of the capacitor with only a KOH aqueous solution used as an electrolyte. As a result, the capacitor with polymer hydrogel was found to exhibit higher capacitance than that with the KOH aqueous solution and an excellent high-rate dischargeability. The above results provide valuable information to explore novel composition of EDLCs.     

Synthesis and characterization of an interpenetrating polymer network composed of poly(methacrylic acid) and poly(vinyl alcohol)

Temperature and pH‐responsive interpenetrating polymer network (IPN) hydrogels, constructed with poly(methacrylic acid) (PMAA) and poly(vinyl alcohol) (PVA), by a sequential IPN method, were studied. The characterization of IPN hydrogels was investigated by Fourier‐transform infrared spectroscopy, differential scanning calorimetry (DSC) and swelling under various conditions. The IPN hydrogels exhibited relatively high swelling ratios, in the range 230–380 %, at 25 °C. The swelling ratios of the PMAA/PVA IPN hydrogels were pH and temperature dependent. DSC was used for the quantitative determination of the amounts of freezing and non‐freezing water. The amount of free water increased with increasing PMAA content in the IPN hydrogels. Copyright © 2004 Society of Chemical Industry     

pH–temperature responsive poly(HPA‐Co‐AMHS) hydrogel as a potential drug‐release carrier

In this study, a novel pH–temperature‐responsive copolymer was first synthesized by the radical copolymerization between HPA (2‐hydroxypropyl acrylate and 2‐hydroxyisopropyl acrylate) and AMHS (aminoethyl methacrylate hydrochloric salt). The molecular structure of the corresponding copolymer has been confirmed by ¹H‐NMR and FTIR. The lower critical solution temperature of the resulting copolymer exhibited a considerable dependence upon the ratio of monomers and pH value in the medium. On the basis of the copolymer, a hydrogel as drug release carrier was prepared via the introduction of a crosslinker, N,N′‐methylenebisacrylamide. The swelling behaviors of hydrogel in the different pH value, temperature, and NaCl concentration have indicated that the hydrogel showed a remarkable phase transition at 31.5°C. The swelling ratio was increased with an increasing of pH value, especially in the greater pH values. By the use of caffeine as a model drug, we investigated the caffeine‐controlled release from hydrogel systematically as a function of pH value, temperature, and crosslinker content. The caffeine release was sensitive to the temperature. Only 55% caffeine was released from the hydrogel at room temperature, whereas ～ 92% caffeine diffused into the medium at 37°C. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Electrochemical behavior of an interpenetrating polymer network hydrogel composed of poly(propylene glycol) and poly(acrylic acid)

An interpenetrating polymer network (IPN) hydrogel based on poly(propylene glycol) and poly(acrylic acid) was prepared by UV irradiation. The swelling behavior of the IPN hydrogel was studied by the immersion of the gel in aqueous NaCl solutions of various concentrations. The swelling ratio decreased with an increase in the NaCl concentration. The electrically sensitive behavior of the IPN hydrogel in electric fields was also investigated. The IPN hydrogel also showed a stepwise bending behavior that depended on the electric stimulus. The bending angle and bending speed of the IPN hydrogel were greatest in 0.6 wt % aqueous NaCl and increased with an increase in the applied voltage. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2301–2305, 2003