Photocatalytic properties of porous TiO2/Ag thin films

In this study, nanocrystalline TiO₂/Ag composite thin films were prepared by a sol-gel spin-coating technique. By introducing polystyrene (PS) spheres into the precursor solution, porous TiO₂/Ag thin films were prepared after calcination at a temperature of 500 °C for 4 h. Three different sizes (50, 200, and 400 nm) of PS spheres were used to prepare porous TiO₂ films. The as-prepared TiO₂ and TiO₂/Ag thin films were characterized by X-ray diffractometry (XRD) and by scanning electron microscopy to reveal structural and morphological differences. In addition, the photocatalytic properties of these films were investigated by degrading methylene blue under UV irradiation.When PS spheres of different sizes were introduced after calcination, the as-prepared TiO₂ films exhibited different porous structures. XRD results showed that all TiO₂/Ag films exhibited a major anatase phase. The photodegradation of porous TiO₂ thin films prepared with 200 nm PS spheres and doped with 1 mol% Ag exhibited the best photocatalytic efficiency where ∼ 100% methylene blue was decomposed within 8 h under UV exposure.     

SiO2/TiO2 multilayer films grown on cotton fibers surface at low temperature by a novel two-step process

A novel two-step process was developed to synthesize and deposit SiO₂/TiO₂ multilayer films onto the cotton fibers. In the first step, SiO₂ particles on cotton fiber surface were synthesized via tetraethoxysilane hydrolysis in the presence of cotton fibers, in order to protect the fibers against photo-catalytic decomposition by TiO₂ nanoparticles. In the second step, the growth of TiO₂ nanoparticles into the modified cotton fiber surface was carried out via a sol-gel method at the temperature as low as 100 °C. The as-obtained SiO₂/TiO₂ multilayer films coated on cotton fibers were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, atomic force microscopy and X-ray diffraction, respectively.     

Sol–gel preparation and properties of Ag–TiO2 films on surface roughened Ti–6Al–4V alloy

Ag–TiO₂ films (Ag/Ti?=?3·3, 9·1 at-%) were sol–gel coated on Ti–6Al–4V alloy that had been surface roughened by the NaOH–HCl treatment for antibacterial applications. Scanning electron microscopy observation showed that pore size of the surface layer of NaOH–HCl treated Ti–6Al–4V alloy increased with the NaOH concentration. Ag–TiO₂ films on the surface roughened substrate were adherent and crack-free. X-ray photoelectron spectroscopy and Auger electron spectroscopy analyses indicated that Ag existed in metallic state, and the films completely covered the roughened substrate. X-ray diffraction peaks of the substrate and anatase TiO₂ were detected. The Ag–TiO₂ films on the roughened substrate exhibited good adhesion quality and high cohesion strength in the indentation test. The potentiodynamic polarisation test showed that the TiO₂ and Ag–TiO₂ films improved corrosion resistance of the substrate.     

Photocatalytic TiO2 films deposited on cenosphere particles by pulse magnetron sputtering method

In the present study, TiO₂ films were deposited on the surface of cenosphere particles using the modified magnetron sputtering equipment under different working conditions. The resulting films were characterized by field emission scanning electron microscopy (FE-SEM), Atomic Force Microscopy (AFM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). The FE-SEM and AFM results show that the grain sizes and root-mean-square (RMS) roughness values of the TiO₂ films increase with the increase in deposition time and film thickness. The XRD results indicate that the film was TiO₂ film and sputtering time is an importance condition to influence the films crystal. With the increasing of sputtering time, the crystallization of the TiO₂ film was increased. The XPS results show that only TiO₂ films existed on the surface of cenosphere particles. In addition, the photocatalytic activities of these films were investigated by degrading methyl orange under UV irradiation. The results suggest that the photocatalytic activity of cenosphere particles with anatase TiO₂ films is remarkable and this catalyst can be applicable for the photocatalytic degradation of other organic compounds under UV lights.     

Investigation of Structural, Magnetic and Magnetotransport Properties of Electrodeposited Co–TiO2 Nanocomposite Films

Nanocomposite Co?CTiO₂ thin films were prepared by simultaneous electrodeposition of Co and TiO₂ on a Cu substrate from a solution based on Co sulfate in which TiO₂ nanoparticles were suspended by stirring. We investigated the influence of the TiO₂ nanoparticles concentration in the bath on the morphology, composition, magnetic and magnetotransport properties of the films. The Co?CTiO₂ thin films were characterized by using scanning electron microscopy, X-ray photoelectron spectroscopy and X-ray diffraction analyses, and their magnetic properties were evaluated by using an induction type device with data acquisition system and a torque magnetometer. The current in-plane transport properties of the films have been investigated. The results showed that the films were composed of a Co metal matrix containing embedded TiO₂ nanoparticles and cobalt hydroxide which is formed simultaneously with cobalt metal deposition. The amount of TiO₂ in the film increases with the rising concentration of TiO₂ nanoparticles in the plating bath. This complex structure favored the increase of the magnetoresistance. The Co?CTiO₂ nanocomposite films (containing about 1.3 at.% Ti) exhibit a giant magnetoresistance contribution of 47.6 %. From the magnetic measurements, we have found that the saturation magnetization, the magnetic susceptibility, and the effective magnetic anisotropy constant decrease with the increasing content of TiO₂ in the thin layer. The easy magnetization axis direction changes from in-plane to almost perpendicular-to-plane, with increasing TiO₂ nanoparticles content in the film. The existence of a giant magnetoresistance effect in Co?CTiO₂ is very promising for potential applications in spintronics.     

Photocatalytic properties of Au/TiO2 thin films prepared by RF magnetron co-sputtering

Au/TiO₂ thin films with various Au doping contents were deposited on quartz substrates by radio frequency (RF) magnetron co-sputtering. The as-deposited Au/TiO₂ films were characterized by energy-dispersive X-ray spectroscopy (EDS), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), XRD, and UV-vis techniques. Au doping and UV treatment enhanced the photocatalytic efficiency of TiO₂ thin films. The optimal RF power of the Au target and UV treatment time were 5 W and 1 h, respectively. The enhanced photoactivity of Au(5 W)/TiO₂ thin films with UV treatment is found to result from the increased hydroxyl concentration.     

Natural and persistent superhydrophilicity of SiO2/TiO2 and TiO2/SiO2 bi-layer films

Sol-gel SiO₂/TiO₂ and TiO₂/SiO₂ bi-layer films have been deposited from a polymeric SiO₂ solution and either a polymeric TiO₂ mother solution (MS) or a derived TiO₂ crystalline suspension (CS). The chemical and structural properties of MS and CS bi-layer films heat-treated at 500 °C have been investigated by Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy, and transmission electron microscospy. Water contact angle measurements show that MS SiO₂/TiO₂ and CS TiO₂/SiO₂ bi-layer films exhibit a natural superhydrophilicity, but cannot maintain a zero contact angle for a long time over film aging. In contrast, CS SiO₂/TiO₂ bi-layer films exhibit a natural, persistent, and regenerable superhydrophilicity without the need of UV light. Superhydrophilic properties of bi-layer films are discussed with respect to the nature of the TiO₂ single-layer component and arrangement of the bi-layer structure, i.e. TiO₂ underlayer or overlayer.     

Effect of micro-characterization on thrombus formation ability of TiO2 film

The thrombus formation ability of a biomedical microcoil for hemangioma treatment is one of the basic requirements in clinical intervention application. Surface modification of a biomedical microcoil can improve its thrombus formation ability. In this work, TiO₂ films were deposited using the unbalanced magnetron sputtering method. The structures, components and micro-morphologies of the films were investigated by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), atomic force microscope (AFM), and scanning electron microscope (SEM). The thrombus formation ability of the films was studied by in vitro platelet adhesion test. The results indicated that a certain characteristic TiO₂ film has the ability to increase thrombus formation. Furthermore, the biological behavior of cultured human umbilical vein endothelial cells (HUVECs) onto different films was investigated by an in vitro HUVECs cultured experiment. The results showed that endothelial cells on certain TiO₂ film surfaces have good adherence, growth and proliferation. Additionally, the relationship between the micro-characterization and biological properties of TiO₂ films is discussed.     

Investigation on the structure of TiO2 films sputtered on alloy substrates

Titanium dioxide (TiO₂) films have been successfully deposited on metal alloy substrates by radio-frequency magnetron reactive sputtering in an Ar+O₂ gas mixture. The effects of gas total pressure on the structure and phase transition of TiO₂ films were studied by X-ray diffraction and Raman spectra. It is suggested that the film structure changes from rutile to anatase while work gas total pressure changes from 0.2 to 2 Pa. The structure of TiO₂ films is not affected by the film thickness.     

Preparation and characterization of Co-doped TiO2 materials for solar light induced current and photocatalytic applications

Different amounts of Co-doped TiO₂ powders and thin films were prepared by following a conventional co-precipitation and sol–gel dip coating technique, respectively. The synthesized powders and thin films were subjected to thermal treatments from 400 to 800 °C and were thoroughly investigated by means of X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive analysis with X-rays, FT-infrared, FT-Raman, diffuse reflectance spectroscopy, ultraviolet–visible spectroscopy, BET surface area, zeta potential, flat band potential measurements, band-gap energy, etc. The photocatalytic ability of the powders was evaluated by methylene blue (MB) degradation studies. The thin films were characterized by photocurrent and ultraviolet–visible (UV–Vis) spectroscopy techniques. The characterization results suggest that the Co-doped TiO₂ powders synthesized in this study consist mainly anatase phase, and possess reasonably high specific surface area, low band gap energy and flat band potentials amenable to water oxidation in photoelectrochemical (PEC) cells. The photocatalytic degradation of MB over Co-doped TiO₂ powders followed the Langmuir–Hinshelwood first order reaction rate relationship. The 0.1 wt.% Co-doped TiO₂ composition provided the higher photocurrent, n-type semi-conducting behavior and higher photocatalytic activity among various Co-doped TiO₂ compositions and pure TiO₂ investigated.     

A simple electrophoretic deposition method to prepare TiO2-B nanoribbon thin films for dye-sensitized solar cells

This paper describes a simple method utilizing electrophoretic deposition (EPD) to quickly synthesize hydrogen titanate nanoribbon films. The subsequent heating of the hydrogen titanate nanoribbon films causes the dehydration of interlayered OH groups, thereby leading to TiO₂-B nanoribbon films. Thick, uniform TiO₂-B nanoribbon films were obtained from prepared alkali suspensions. The crystal structure of the hydrogen titanate and TiO₂-B nanoribbon films obtained from EPD underwent analysis by X-ray diffraction and high-resolution transmission electron microscope. EPD controlled the thickness of TiO₂-B nanoribbons films. TiO₂-B-coated fluorine-doped tin oxide films were dye-sensitized with N3 and used as a photoanode in an electrochemical solar cell. The solar cell yielded conversion efficiencies of 0.87% for an incident solar energy of 100 mW/cm².     

Structural,morphological and photocatalytic characterisations of Ag-coated anatase TiO2 fabricated by the sol–gel dip-coating method

This study reports on the synthesis, characterisation and environmental applications of immobilised Titanium dioxide (TiO₂) as photocatalyst. Nanostructured thin films have been prepared on glass substrates using a layer-by-layer dip-coating method. The crystalline phase and surface morphology of the thin films were investigated by X-ray diffraction (XRD) pattern and scanning electron microscopy (SEM), respectively. The XRD results show that the TiO₂ thin films crystallise in anatase phase and we have found that the thin films consist of titanium dioxide nanocrystals. SEM shows that the nanoparticles are sintered together to form a compact structure and TiO₂ particles coated with silver nanoclusters were observed. Ag-coated TiO₂ films demonstrated photocatalysis performance when irradiated, and the Ag carrier further showed an electron-scavenging ability to mitigate electron–hole pair recombination, which can improve the photocatalytic efficiency. With the oxidisation and electron-scavenging ability of Ag and the photocatalysis ability of TiO₂, Ag-coated TiO₂ can decolour methyl orange (MO) more than bare TiO₂. It is a new approach to form Ag-coated TiO₂ nanoparticles with a simple system and non-toxic materials. The high photocatalytic effect of Ag-coated TiO₂ nanoparticles on pollutant (MO) suggests that it may have a promising future for water and wastewater treatments.     

Structural,optical, and magnetic properties of polycrystalline Co-doped TiO2 synthesized by solid-state method

We have used a solid-state method to synthesize polycrystalline Co-doped TiO₂ diluted magnetic semiconductors (DMSs) with Co concentrations of 0, and 0.5 at.%. X-ray diffraction patterns reveal that Co doped TiO₂ crystallizes in the rutile tetragonal structure with no additional peaks. Transmission electron microscopy (TEM) did not indicate the presence of magnetic parasitic phases and confirmed that Co ions are uniformly distributed inside the samples. Optical absorbance measurements showed an energy band gap which decreases after doping with the Co atoms into the TiO₂ matrix. Magnetization measurements revealed a paramagnetic behavior for the as-prepared Co-doped TiO₂ and a ferromagnetic behavior for the same samples after annealed under a mixture of H₂/N₂ atmosphere.     

An investigation of super-hydrophilic properties of TiO2/SnO2 nano composite thin films

A sol-gel dip coating technique was used to fabricate TiO₂/SnO₂ nano composite thin films on soda-lime glass. The solutions of SnO₂ and TiO₂ were mixed with different molar ratios of SnO₂:TiO₂ as 0, 3, 4, 6, 8, 9, 10.5, 13, 15, 19.5, 25 and 28 mol.% then the films were prepared by dip coating of the glasses. The effects of SnO₂ concentration, number of coating cycles and annealing temperature on the hydrophilicity of films were studied using contact angle measurement. The films were characterized by means of scanning electron microscopy, X-ray diffraction and atomic force microscopy measurements. The nano composite thin films fabricated with 8 mol.% of SnO₂, four dip coating cycles and annealing temperature of 500 °C showed super-hydrophilicity.     

Study of the deposition parameters and Fe-dopant effect in the photocatalytic activity of TiO2 films prepared by dc reactive magnetron sputtering

The reactive magnetron sputtering method was used to prepare pure and Fe-doped titanium dioxide thin films. The films were deposited onto microscope glass slides and polycarbonate plates at different total pressure and Fe-doping concentrations. The films were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), atomic force microscopy (AFM) and UV-visible spectroscopy (UV). For glass substrates a polycrystalline TiO₂ structure was verified with X-ray diffraction, which showed typical characteristic anatase reflections. An iron phase appeared in the highly Fe-doped samples. The absorption edges of the Fe-doped TiO₂ films shifted to visible region with increasing concentration of iron. For the polycarbonate substrate an amorphous TiO₂ structure was revealed for all deposition conditions. The effects of different Fe-doping and total pressure levels on the photocatalytic activity were obtained by the degradation rates of Rhodamine-B (RoB) dye under UV light irradiation. For the deposition conditions considered in this study the highest photodegradation rates were achieved for films deposited on the polymer substrates. Of these overall highest rates was achieved for deposition at 0.4 Pa and without doping. However, for both substrates, films prepared at the particular total pressure of 0.5 Pa and a low iron concentration showed better photocatalytic activity than the pure TiO₂ films prepared under the same deposition parameters. On the contrary, the photocatalytic degradation rates of RoB on the highly Fe-doped TiO₂ films decreased strongly.     

Characterization of SiO2 and TiO2 films prepared using rf magnetron sputtering and their application to anti-reflection coating

Preparation of TiO₂ and SiO₂ films for optical applications was attempted using conventional rf magnetron sputtering in the sputtering ambient with various O₂/Ar+O₂ ratios and at substrate temperatures between room temperature and 400 °C. X-ray photoelectron spectroscopy (XPS) and optical spectroscopy investigations indicated that oxygen addition in the sputtering ambient was essential for growing TiO₂ films with stoichiometric compositions and good transmittance, while SiO₂ films had a stoichiometric composition of O/Si ratio=2.1-2.2 and were highly transparent in the visible wavelength region, independent of gas composition in the growing ambient. It was also identified from scanning electron microscope (SEM), atomic force microscope (AFM) and Fourier transform infrared spectroscopy (FTIR) measurements that the structural characteristics of both TiO₂ and SiO₂ films were significantly improved with O₂ addition in the sputtering ambient, showing smoother surface morphologies and higher resistances to water absorption when compared with films grown without O₂ addition. Heating of the substrate between 200 and 400 °C considerably increased the refractive index of TiO₂ layers, resulting in dense structures along with an improvement of crystallinity. For optical applications, AR coatings composed of 2-4 multi-layers on glass were designed and manufactured by stacking in turn the SiO₂ and TiO₂ films at room temperature and O₂/Ar+O₂=10%, and the performance of the produced coatings was compared with simulation results.     

Influence of annealing on the structure and stoichiometry of europium-doped titanium dioxide thin films

This work presents the influence of annealing on the structure and stoichiometry of europium (Eu)-doped titanium dioxide (TiO₂). Thin films were fabricated by magnetron sputtering from a metallic Ti-Eu target in oxygen atmosphere and deposited on silicon and SiO₂ substrates. After deposition the selected samples were additionally annealed in air up to 1070 K.Film properties were examined by means of X-ray diffraction (XRD), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS) and the results were analyzed together with the undoped TiO₂ thin films prepared under similar technological conditions.XRD results showed that depending on the Eu content, as-deposited thin films consisted of the TiO₂-anatase or TiO₂-rutile.An additional annealing will result in the growth of anatase crystals up to 35 nm, but anatase to rutile phase transformation has not been recorded. AFM images display high quality and a dense nanocrystalline structure. From the XPS Ti2p spectra the 4+oxidation state of Ti was confirmed. The O1s XPS spectra displayed the presence of an O²⁻ photoelectron peak accompanied by an additional broader peak that originates from hydroxyl species chemisorbed at the sample surface. It has been found that Eu dopant increases the OH⁻ content on the surface of prepared TiO₂:Eu thin films. The calculated O/Ti ratio was in the range of 1.85-2.04 depending on the sample.     

Low temperature preparation of transparent, antireflective TiO2 films deposited at different O2/Ar ratios by microwave electron cyclotron resonance magnetron sputtering

A serial of crystalline titanium oxide ceramic films were deposited at low temperature using microwave electron cyclotron resonance (MW-ECR) magnetron sputtering with different O₂/Ar ratios. The influences of O₂/Ar ratio on the deposition rate, morphology, crystalline nature, optical adsorption property of the obtained titanium oxide thin films were investigated by means of X-ray diffraction (XRD), atomic force microscopy (AFM) and UV-Vis spectra. Therefore, the optimum O₂/Ar ratio for deposition of anatase TiO₂ thin films on unheated glass substrate was realized in a MW-ECR magnetron sputtering process. The as-deposited anatase TiO₂ films were transparent and were antireflective in the visible region.     

Preparation of nitrogen co-doped SiO2/TiO2 thin films on ceramic with enhanced photocatalytic activity under visible-light irradiation

In this study, we have successfully deposited N-doped SiO₂/TiO₂ thin films on ceramic tile substrates by sol–gel method for auto cleaning purpose. After dip coating and annealing process the film was transparent, smooth and had a strong adhesion on the ceramic tile surface. The synthesised catalysts were then characterised by using several analytical techniques such as X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), atomic force microscope (AFM) and UV-vis absorption spectroscopy (UV-vis). The analytical results revealed that the optical response of the synthesised N-doped SiO₂/TiO₂ thin films was shifted from the ultraviolet to the visible light region. The nitrogen substituted some of the lattice oxygen atoms. The surface area of co-doped catalyst increased, and its photocatalytic efficiency was enhanced. The photocatalytic tests indicated that nitrogen co-doped SiO₂/TiO₂ thin films demonstrated higher than of the SiO₂/TiO₂ activity in decolouring of methylene blue under visible light. The enhanced photocatalytic activity was attributed to an increasing of the surface area and a forming of more hydroxyl groups in the doped catalyst.     

Preparation of anatase TiO2 thin films by vacuum arc plasma evaporation

Anatase titanium dioxide (TiO₂) thin films with high photocatalytic activity have been prepared with deposition rates as high as 16 nm/min by a newly developed vacuum arc plasma evaporation (VAPE) method using sintered TiO₂ pellets as the source material. Highly transparent TiO₂ thin films prepared at substrate temperatures from room temperature to 400 °C exhibited photocatalytic activity, regardless whether oxygen (O₂) gas was introduced during the VAPE deposition. The highest photocatalytic activity and photo-induced hydrophilicity were obtained in anatase TiO₂ thin films prepared at 300 °C, which correlated to the best crystallinity of the films, as evidenced from X-ray diffraction. In addition, a transparent and conductive anatase TiO₂ thin film with a resistivity of 2.6 × 10^− 1 Ω cm was prepared at a substrate temperature of 400 °C without the introduction of O₂ gas.