基于遗传聚类的无线传感器负载均衡路由算法

通常的无线传感器分簇网络存在节点负载不均衡的问题。为均衡各节点能量消耗,延长网络生存周期,将K均值算法与遗传算法相结合,提出一种负载均衡的无线传感器网络路由算法,算法利用遗传算法的全局寻优能力以克服传统K均值算法的局部性和对初始中心的敏感性,实现了传感器网络节点自适应成簇与各节点负载均衡。仿真实验表明,该算法显著延长了网络寿命,相对于其他分簇路由算法,其网络生存时间延长了约43%。     

基于遗传聚类的无线传感器负载均衡路由算法

通常的无线传感器分簇网络存在节点负载不均衡的问题。为均衡各节点能量消耗,延长网络生存周期,将K均值算法与遗传算法相结合,提出一种负载均衡的无线传感器网络路由算法,算法利用遗传算法的全局寻优能力以克服传统K均值算法的局部性和对初始中心的敏感性,实现了传感器网络节点自适应成簇与各节点负载均衡。仿真实验表明,该算法显著延长了网络寿命,相对于其他分簇路由算法,其网络生存时间延长了约43%。     

A cluster‐based fault‐tolerant routing protocol for wireless sensor networks

Energy conservation and fault tolerance are two critical issues in the deployment of wireless sensor networks (WSNs). Many cluster‐based fault‐tolerant routing protocols have been proposed for energy conservation and network lifetime maximization in WSNs. However, these protocols suffer from high frequency of re‐clustering as well as extra energy consumption to tolerate failures and consider only some very normal parameters to form clusters without any verification of the energy sufficiency for data routing. Therefore, this paper proposes a cluster‐based fault‐tolerant routing protocol referred as CFTR. This protocol allows higher energy nodes to become Cluster Heads (CHs) and operate multiple rounds to diminish the frequency of re‐clustering. Additionally, for the sake to get better energy efficiency and balancing, we introduce a cost function that considers during cluster formation energy cost from sensor node to CH, energy cost from CH to sink, and another significant parameter, namely, number of cluster members in previous round. Further, the proposed CFTR takes care of nodes, which have no CH in their communication range. Also, it introduces a routing algorithm in which the decision of next hop CH selection is based on a cost function conceived to select routes with sufficient energy for data transfer and distribute uniformly the overall data‐relaying load among the CHs. As well, a low‐overhead algorithm to tolerate the sudden failure of CHs is proposed. We perform extensive simulations on CFTR and compare their results with those of two recent existing protocols to demonstrate its superiority in terms of different metrics.     

Distributed fuzzy logic based energy‐aware and coverage preserving unequal clustering algorithm for wireless sensor networks

In an energy‐constrained wireless sensor networks (WSNs), clustering is found to be an effective strategy to minimize the energy depletion of sensor nodes. In clustered WSNs, network is partitioned into set of clusters, each having a coordinator called cluster head (CH), which collects data from its cluster members and forwards it to the base station (BS) via other CHs. Clustered WSNs often suffer from the hot spot problem where CHs closer to the BS die much early because of high energy consumption contributed by the data forwarding load. Such death of nodes results coverage holes in the network very early. In most applications of WSNs, coverage preservation of the target area is a primary measure of quality of service. Considering the energy limitation of sensors, most of the clustering algorithms designed for WSNs focus on energy efficiency while ignoring the coverage requirement. In this paper, we propose a distributed clustering algorithm that uses fuzzy logic to establish a trade‐off between the energy efficiency and coverage requirement. This algorithm considers both energy and coverage parameters during cluster formation to maximize the coverage preservation of target area. Further, to deal with hot spot problem, it forms unequal sized clusters such that more CHs are available closer to BS to share the high data forwarding load. The performance of the proposed clustering algorithm is compared with some of the well‐known existing algorithms under different network scenarios. The simulation results validate the superiority of our algorithm in network lifetime, coverage preservation, and energy efficiency.     

Network energy optimization and intelligent routing in WSN applicable for IoT using self-adaptive coyote optimization algorithm

The Internet of Things (IoT) is a recent wireless telecommunications platform, which contains a set of sensor nodes linked by wireless sensor networks (WSNs). These approaches split the sensor nodes into clusters, in which each cluster consists of an exclusive cluster head (CH) node. The major scope of this task is to introduce a novel CH selection in WSN applicable to IoT using the self-adaptive meta-heuristic algorithm. This paper aids in providing the optimal routing in the network based on direct node (DN) selection, CH selection, and clone cluster head (CCH) selection. DNs are located near the base station, and it is chosen to avoid the load of CH. The adoption of the novel self-adaptive coyote optimization algorithm (SA-COA) is used for the DN selection and CCH selection. When the nodes are assigned in the network, DN and CCH selection is performed by the proposed SA-COA. Then, the computation of residual energy helps to select the CH, by correlating with the threshold energy. CCH is proposed to copy the data from the CH to avoid the loss of data in transmitting. By forming the CCH, the next CH can be easily elected with the optimal CCH using SA-COA. From the simulation findings, the best value of the designed SA-COA-LEACH model is secured at 1.14%, 3.17%, 1.18%, and 7.33% progressed than self-adaptive whale optimization algorithm (SAWOA), cyclic rider optimization algorithm (C-ROA), krill herd algorithm (KHA), and COA while taking several nodes 50. The proposed routing of sensor networks specifies better performance than the existing methods.     

基于无线传感器网络的K均值算法研究

传统无线传感网一般由大量密集的传感器节点构成,存在节点计算能力、能源和带宽都非常有限的缺点,为了有效节能、延长网络寿命,介绍了基于聚类的K均值算法.该算法通过生成的簇头节点散播到网络的各个区域中,减少了每个区域内通信的能耗和可能会出现的一般节点过早死亡的情况,从而避免了网络对该区城提早失去监控.实验证明,该算法对各节点...     

Energy-aware redundancy-aware clustering in wireless sensor networks using Spined Loach Searching Optimization

Wireless sensor networks play dominant role in data communication in many engineering applications and faces lot of challenges in its implementation. Energy conservation is also significantly required in these systems as the sensor nodes are battery operated. Hence, the energy efficient-based technique needs to be implemented in data transmission. The most widely used methods are clustering-based data transmission and energy efficient routing detection. In clustering, the proper selection of cluster head (CH) node is important to ensure energy balancing. The CH node should have more residual energy as it does many transmissions in the network. Moreover, the location of CH node should be nearer to all member nodes in the cluster. The clustering process must also perform the job of avoiding unnecessary transmissions. By considering these factors, the CH node can be optimally selected using Spined Loach Searching Optimization algorithm. The food searching behavior and environmental suitability for spiny loach fish living are deliberated to develop this bio-inspired algorithm. In addition, the redundant transmissions inside the clusters can be reduced by employing a new technique called Least Difference Threshold Based Similarity Grouping. This work improves energy efficiency comparing with the conventional low energy adaptive clustering hierarchy protocol, and it is evaluated by setting the network in simulation environment. The network lifetime is increased; energy consumption, delay of transmission and the message cost are reduced.     

Energy efficient clustering algorithms for wireless sensor networks: novel chemical reaction optimization approach

Clustering has been accepted as one of the most efficient techniques for conserving energy of wireless sensor networks (WSNs). However, in a two-tiered cluster based WSN, cluster heads (CHs) consume more energy due to extra overload for receiving data from their member sensor nodes, aggregating them and transmitting that data to the base station (BS). Therefore, proper selection of CHs and optimal formation of clusters play a crucial role to conserve the energy of sensor nodes for prolonging the lifetime of WSNs. In this paper, we propose an energy efficient CH selection and energy balanced cluster formation algorithms, which are based on novel chemical reaction optimization technique (nCRO), we jointly called these algorithms as novel CRO based energy efficient clustering algorithms (nCRO-ECA). These algorithms are developed with efficient schemes of molecular structure encoding and potential energy functions. For the energy efficiency, we consider various parameters such as intra-cluster distance, sink distance and residual energy of sensor nodes in the CH selection phase. In the cluster formation phase, we consider various distance and energy parameters. The algorithm is tested extensively on various scenarios of WSNs by varying number of sensor nodes and CHs. The results are compared with original CRO based algorithm, namely CRO-ECA and some existing algorithms to demonstrate the superiority of the proposed algorithm in terms of energy consumption, network lifetime, packets received by the BS and convergence rate.     

DUCR: Distributed unequal cluster‐based routing algorithm for heterogeneous wireless sensor networks

Designing energy efficient communication protocols for wireless sensor networks (WSNs) to conserve the sensors' energy is one of the prime concerns. Clustering in WSNs significantly reduces the energy consumption in which the nodes are organized in clusters, each having a cluster head (CH). The CHs collect data from their cluster members and transmit it to the base station via a single or multihop communication. The main issue in such mechanism is how to associate the nodes to CHs and how to route the data of CHs so that the overall load on CHs are balanced. Since the sensor nodes operate autonomously, the methods designed for WSNs should be of distributed nature, i.e., each node should run it using its local information only. Considering these issues, we propose a distributed multiobjective‐based clustering method to assign a sensor node to appropriate CH so that the load is balanced. We also propose an energy‐efficient routing algorithm to balance the relay load among the CHs. In case any CH dies, we propose a recovery strategy for its cluster members. All our proposed methods are completely distributed in nature. Simulation results demonstrate the efficiency of the proposed algorithm in terms of energy consumption and hence prolonging the network lifetime. We compare the performance of the proposed algorithm with some existing algorithms in terms of number of alive nodes, network lifetime, energy efficiency, and energy population.     

用马尔科夫模型优化分布式最小连通支配集算法

 为了提高无线传感器网络(WSNs)的能量利用效率、延长网络的生存时间,对基于极大独立集的最小连通支配集算法(MISB)进行优化,提出了一种新的算法.本文首先应用离散马尔科夫链为节点建立模型,并且根据模型预测节点的能量消耗;本算法进行多轮选举,每一轮开始时根据节点的度和能量选举支配点,依据模型预测的能量消耗决定本轮的运行时间,本轮运行结束时从新选举支配点,开始新一轮.仿真结果表明,本算法和原算法相比可以更好地平衡网络的能量消耗,提高全网的能量利用率,极大地延长网络的生存时间.     

Adaptive concentric chains protocol for energy efficient routing in wireless sensor networks

This paper addresses the energy efficiency of data collection based on a concentric chain clustering topology for wireless sensor networks (WSNs). To conserve the energy dissipation of nodes spent in data routing, the paper attempts to take advantage of the two opportunities: (a) the impact of the relative positions of wireless nodes to the base station on the energy efficiency of the routing chain within each cluster; (b) the effect of the varying‐sized chains on the selection rule of cluster heads (CHs). To establish an energy‐efficient chain to connect all the nodes in a cluster, the paper proposes a principal vector projection approach, which takes into account both the position of each node and that of the base station, to determine the order to which a node can be linked into the chain in order to reduce the energy requirement of the chain. Since the CH selection rules in the concentric chains are mutually independent, solely based on their self‐cluster sizes, the multi‐hop path passing through all the CHs will consist of longer links and thus consume a significant fraction of the total energy. Thus, in order to suppress the effect of the unequal cluster sizes on decreasing the energy efficiency of the multi‐hop path of CHs, the paper offers an average‐cluster‐size‐based rule (ACSB) for each cluster in order to adapt the CH selection with both the number of active nodes in the current cluster and the average value of all cluster sizes. With these two proposed schemes, an adaptive concentric chain‐based routing algorithm is proposed which enables nodes to collaboratively reduce the energy dissipation incurred in gathering sensory data. By computer simulation, the results demonstrate that the proposed algorithm performs better than other similar protocols in terms of energy saved and lifetime increased capabilities for WSNs which deploy random sensor nodes. Copyright © 2010 John Wiley & Sons, Ltd.     

Assimilation of fuzzy clustering approach and EHO‐Greedy algorithm for efficient routing in WSN

The problems related to energy consumption and improvement of the network lifetime of WSN (wireless sensor network) have been considered. The base station (BS) location is the main concern in WSN. BSs are fixed, yet, they have the ability to move in some situations to collect the information from sensor nodes (SNs). Recently, introducing mobile sinks to WSNs has been proved to be an efficient way to extend the lifespan of the network. This paper proposes the assimilation of the fuzzy clustering approach and the Elephant Herding Optimization (EHO)‐Greedy algorithm for efficient routing in WSN. This work considers the separate sink nodes of a fixed sink and movable sink to decrease the utilization of energy. A fixed node is deployed randomly across the network, and the movable sink node moves to different locations across the network for collecting the data. Initially, the number of nodes is formed into the multiple clusters using the enhanced expectation maximization algorithm. After that, the cluster head (CH) selection done through a fuzzy approach by taking the account of three factors of residual energy, node centrality, and neighborhood overlap. A suitable collection of CH can extremely reduce the utilization of energy and also enhancing the lifespan. Finally, the routing protocol of the hybrid EHO‐Greedy algorithm is used for efficient data transmission. Simulation results display that the proposed technique is better to other existing approaches in regard to energy utilization and the system lifetime.     

Improved low energy adaptive clustering hierarchy and its optimum cluster head selection

ABSTRACT

Wireless sensor networks (WSNs) play a vital role in present-day world, which are being used in different types of applications and occupy an important part in networking domain. The main objective of WSNs is to sense and collect the information from a given area of interest and provide the gathered data to the sink. WSN comprises of number of sensor nodes with batteries of limited energy for communication and computational activities, which are not possible to recharge the batteries after their deployment in the region of interest. Therefore, saving battery energy and utilising the limited power to the optimum level for extending network lifetime became the main factor of WSN. Hence, optimum cluster head (CH) selection will make the network to support longer lifetime and balanced energy consumption during its lifetime. Our proposed protocol selects the optimum CH and found out to be more efficient than the existing low energy adaptive clustering hierarchy. The simulated output shows better network lifetime and in some other performance metric.     

Flower pollination algorithm‐based energy‐efficient stable clustering approach for WSNs

The advances in the size, cost of deployment, and user‐friendly interface of wireless sensor devices have given rise to many wireless sensor network (WSN) applications. WSNs need to use protocols for transmitting data samples from event regions to sink through minimum cost links. Clustering is a commonly used method of data aggregation in which nodes are organized into groups to reduce energy consumption. Nonetheless, cluster head (CH) has to bear an additional load in clustering protocols to organize different activities within the cluster. Proper CH selection and load balancing using efficient routing protocol is therefore a critical aspect for WSN's long‐term operation. In this paper, a threshold‐sensitive energy‐efficient cluster‐based routing protocol based on flower pollination algorithm (FPA) is proposed to extend the network's stability period. Using FPA, multihop communication between CHs and base station is used to achieve optimal link costs for load balancing distant CHs and energy minimization. Analysis and simulation results show that the proposed algorithm significantly outperforms competitive clustering algorithms in terms of energy consumption, stability period, and system lifetime.     

基于改进SSA优化WSN分簇协议

无线传感器网络(Wireless Sensor Networks,WSN)的路由协议是无线传感器网络领域中的一个研究热点.针对LEACH协议的不足,提出一种基于自适应t分布改进麻雀搜索算法(Improved Sparrow Search Algorithm,ISSA)的改进LEACH协议(LEACH?ISSA),以解决...     

A modified whale-dragonfly algorithm and self-adaptive cuckoo search-based clustering strategy for augmenting network lifetime in wireless sensor networks

Designing an energy efficient and durable wireless sensor networks (WSNs) is a key challenge as it personifies potential and reactive functionalities in harsh antagonistic environment at which wired system deployment is completely infeasible. Majority of the clustering mechanisms contributed to the literature concentrated on augmenting network lifetime and energy stability. However, energy consumption incurred by cluster heads (CHs) are high and thereby results in minimized network lifetime and frequent CHs selection. In this paper, a modified whale-dragonfly optimization algorithm and self-adaptive cuckoo search-based clustering strategy (MWIDOA-SACS) is proposed for sustaining energy stability and augment network lifetime. In specific, MWIDOA-SACS is included for exploiting the fitness values that aids in determining two optimal nodes that are selected as optimal CH and cluster router (CR) nodes in the network. In MWIDOA, the search conduct of dragon flies is completely updated through whale optimization algorithm (WOA) for preventing load balancing at CHs. It minimized the overhead of CH by adopting CHs and CR for collecting information from cluster members and transmitting the aggregated data from CHs to the base station (BS). It included self-adaptive cuckoo search (SACS) for achieving sink mobility using radius, energy stability, received signal strength, and throughput for achieving optimal data transmission process after partitioning the network into unequal clusters. Simulation experiments of the proposed MWIDOA-SACS confirmed better performance in terms of total residual energy by 21.28% and network lifetime by 26.32%, compared to the competitive CH selection strategies.     

多簇无线传感网的优化生存时间近邻功率控制算法

针对非均匀分布的无线传感网的生存时间问题,提出多簇无线传感网的优化生存时间近邻功率控制(NPCAOL_MC)算法。该算法采用K-means算法确定网络的簇个数和对应每个簇的节点,利用近邻算法评估每个簇的节点密度,确定簇的最优通信距离。结合Friss自由空间模型计算当前簇的最优发送功率。Sink节点广播通知其他节点,如果是同一簇内的节点相互通信,则采用簇最优功率发送数据,否则采用默认最大发送功率发送数据。仿真结果表明,利用NPCAOL_MC算法可以分析整个网络节点的位置信息,采用簇最优发送功率发送数据,从而提高生存时间,并使能耗经济有效。在密度分布不均的无线传感网中,NPCAOL_MC比采用固定发送功率的Ratio_w算法更优。     

基于BWAS的无线传感器网络静态分簇路由算法

为提高路径搜索效率,避免动态分簇较多的能量消耗,提出了基于最优-最差蚂蚁系统(BWAS)的无线传感器网络静态分簇路由算法.BWAS是对蚁群算法的改进,在路径搜寻过程中评价出最优最差蚂蚁,引入奖惩机制,加快了路径搜索速度.通过无线传感器网络静态分簇、簇内动态选举簇头,在簇头节点间运用BWAS算法搜寻从簇头节点到汇聚节点的多跳最优路径,能减少路径寻优能量消耗,实现均衡能量管理,延长网络寿命,且具有较强的鲁棒性.通过与基于BWAS的动态分簇和基于蚁群算法的动态分簇路由的仿真实验相比较,证实了本算法的有效性.     

基于全局信息的LEACH协议改进算法

传统LEACH协议在选举簇头节点时,采用动态簇头选举算法,每轮选举产生簇头节点个数为最佳簇头数的概率并不是最大,使得每轮选举的簇头数偏差较大,不能使节点能量达到最优化。针对这一问题,提出了改进的LEACH-P协议,该协议在簇头选举阶段通过簇头节点间的相互协作,以少量的能量消耗来获取全局信息,消除了LEACH协议簇头选举算法的盲目性,从而改善簇头选举算法。实验结果表明,LEACH—P协议相比传统LEACH协议有效地节省了节点能量,延长了网络生命周期。     

Distributed fuzzy approach to unequal clustering and routing algorithm for wireless sensor networks

Due to inherent issue of energy limitation in sensor nodes, the energy conservation is the primary concern for large‐scale wireless sensor networks. Cluster‐based routing has been found to be an effective mechanism to reduce the energy consumption of sensor nodes. In clustered wireless sensor networks, the network is divided into a set of clusters; each cluster has a coordinator, called cluster head (CH). Each node of a cluster transmits its collected information to its CH that in turn aggregates the received information and sends it to the base station directly or via other CHs. In multihop communication, the CHs closer to the base station are burdened with high relay load; as a result, their energy depletes much faster as compared with other CHs. This problem is termed as the hot spot problem. In this paper, a distributed fuzzy logic‐based unequal clustering approach and routing algorithm (DFCR) is proposed to solve this problem. Based on the cluster design, a multihop routing algorithm is also proposed, which is both energy efficient and energy balancing. The simulation results reinforce the efficiency of the proposed DFCR algorithm over the state‐of‐the‐art algorithms, ie, energy‐aware fuzzy approach to unequal clustering, energy‐aware distributed clustering, and energy‐aware routing algorithm, in terms of different performance parameters like energy efficiency and network lifetime.