可压缩自由剪切流混合转捩大涡模拟

针对湍流气动光学效应与冲压发动机气体混合机理问题,开展了可压缩混合层流动空间模式大涡模拟和时间模式直接数值模拟研究.通过对流场(包含亚/亚混合、超/亚混合两种情况)失稳、转捩直至完全湍流的空间发展过程的研究表明,对流Mach数0.4状态下流场失稳以二维最不稳定扰动为主;非线性发展中,基频涡对并及展向涡撕裂主控流动转捩,流场发生混合转捩;转捩后脉动流场基本达到局部各向同性,此时,湍流Mach数低于0.3,流动压缩性可近似忽略.     

可压缩边界层与混合层失稳结构的研究进展及其工程应用

本文回顾了可压缩边界层与混合层中失稳结构及其应用的研究进展. 这些工作包括人们对高超声速平板边界层失稳特性、高超声速圆锥边界层转捩攻角效应的产生机制和可压缩混合层失稳特性的研究认识,以及这些相关认识的3 个应用方向. 这些相关工作丰富了人们对高速流动转捩和湍流拟序结构的认识.     

超声速平板边界层斜波失稳转捩过程研究

以5阶迎风和6阶对称紧致格式混合差分求解三维可压缩滤波Navier-Stokes方程，对Mach 数为4.5, Reynolds数为10000的空间发展平板边界层湍流进行了大涡模拟. 时间推进采用 紧致存储3阶Runge-Kutta方法，亚格子尺度模型为修正Smagorinsky涡黏性模型. 通过在 入口边界叠加一对线性最不稳定第一模态斜波扰动，数值模拟得到了平板层流边界层失稳转 捩直至湍流的演化过程. 对流场转捩过程中瞬时量及统计平均量的分析表明，数值模拟结果 与理论吻合，得到的Y型剪切层、交替\Lambda涡结构以及转捩后期的发卡涡结构的发展 变化与相关文献结果一致，湍流流谱定性合理.     

超声速混合层中扰动增强混合实验

以基于纳米技术的平面激光散射(nano-based planar laser scattering, NPLS)流动显示技术定性研究了隔板扰动对超声速混合层($Mc=0.5$)的混合增强效果. 首先通过系列实验优化设计了扰动参数. 实验结果表明,超声速混合层对于从隔板引入的扰动非常敏感. 二维扰动的混合强化机制是提前混合层失稳位置,增厚混合层;而三维扰动的混合强化机制主要是通过诱导流向涡和展向运动,促进流动三维性质的发展. 总体而言,三维扰动的混合强化效果优于二维扰动. 由于是超声速混合层,隔板上的扰动片虽然很薄,但同样会引起激波的产生,是该方法中总压损失的主要原因.      

壁流动中的转捩

对壁流动的不同实验结果做了对比,这些实验结果来自于流动显示、热膜测量以及PIV测量, 对比的同时,还总结了与此相应的理论方面的进展.这些进展是在对所选大约120篇文献中内容归纳提炼的基础上给出的.尽管实验中所使用的初始扰动条件不同,但所发现的流动结构几乎是完全一样的. 在对壁流动转捩的认识方面,认为下列所观察到的流动结构是最基本最重要的:在边界层和管流中被称为类孤子相干结构(SCS)的三维非线性涡包、$\Lambda$涡、二次涡环和涡环链.近期的实验中发现了这些结构形成和转捩的动力学过程,具体包括以下内容: (1) $\Lambda$ 涡和二次涡环间持续的相互作用过程.该过程决定了涡环链的产生方式, 总是从壁面区域周期性地形成,并进入到边界层的外部区域; (2)高频涡的生成,这是理解转捩和湍流边界层(以及其他流动)发展的关键问题之一.尽管已经提出了一些解释,但是二次涡环的实验发现将对此提供一个特别清晰的解释.(3)在所有湍流猝发中SCS所起的关键作用.这一点被看做是低雷诺数湍流边界层中湍流产生的关键机制.与猝发直接相关联的是低速条带. 基于SCS的动力学过程, 针对壁流动情况,可以比以前更清晰地解释低速条带的形成机制及其与流动结构的关系.在实验中所观察到的SCS和二次涡环,不仅能使我们重温壁面流动转捩中的经典故事, 同时还开辟一条新的途径,可以基于此建立壁面流动转捩可能具有的普适性的动力学过程.      

可压缩横流失稳及其控制

边界层流动转捩的预测与控制一直是流体力学研究中的一个重要问题. 三维边界层流动工程中十分常见, 而横流失稳是导致三维边界层流动转捩的主要原因. 本文综述了近些年来三维边界层失稳和转捩方面的研究概况. 从机理上讨论了横流扰动的感受性、首次失稳、二次失稳和转捩控制等方面的研究进展. 在数值计算方面, 简要概述了线性稳定性理论、非线性稳定性理论和直接数值模拟方法在横流失稳和转捩方面的应用.本文对横流失稳研究当前存在的问题进行了讨论, 对今后研究的发展趋势作了相应展望.     

颗粒在大涡结构中的弥散

气相采用大涡模拟方法,颗粒相采用轨道模型研究了三维后台阶气粒两相湍流流动的大尺度涡结构的瞬时演变过程以及颗粒的瞬时弥散规律.比较了不同入流速度的颗粒在大涡结构中的瞬时弥散特性,尤其研究了高速释放大颗粒的弥散特性.三维流动中大尺度涡结构具有明显的脱离、发展、合并和破碎过程.小颗粒的分布受大涡结构的控制,其空间的弥散过程与流体 大涡结构的空间发展相一致,但是由于三维流动中大涡边缘和中心区的压力差,颗粒在大尺度 涡的边缘出现密集.而大颗粒在流场中的分布受其惯性控制,对气相的涡结构不敏感.高速释放到流场中的大颗粒受惯性影响最大,保持在其原有动量方向上运动.     

返回舱高雷诺数再入过程底部流动稳定性

返回舱高雷诺数再入过程中存在肩部高热流、底部阻力无法准确预测以及非定常振动等问题,解决此类问题的关键是分离和转捩等物理现象的准确识别. 本文采用大涡模拟方法细致刻画了返回舱类钝体外形在高雷诺数再入过程中的分离和转捩等物理现象,获得了返回舱底部流动形态以及稳定性特征. 从肩部剪切失稳、底部流动结构失稳、尾迹发展区以及远尾迹区的耦合失稳等多个角度分析了返回舱外形的底部流动失稳机制.研究发现, 返回舱类外形底部流动稳定性主要存在两类失稳模式即肩部剪切失稳模式以及底部流动结构失稳模式,二种模式存在耦合效应, 同时在远尾迹湍流区域存在类卡门涡街的振荡行为.这些认识为理解返回舱外部扰动因素对底部流动的作用机理及返回舱稳定性控制提供了基础理论支撑.      

化学反应对超音速混合层发展的影响分析

超音速混合层流动发展的研究对于了解超音速燃烧过程具有重要意义.基于耦合详细化学反应动力学机理的高精度数值模拟,分析了化学反应对超音速混合层发展过程的影响.主要分析了在两种燃烧状态下化学反应对混合层的演化过程和混合层厚度的影响.此外从涡动力学角度,分析了化学反应对混合层厚度的影响机理.     

化学反应对超音速混合层发展的影响

超音速混合层流动发展的研究对于了解超音速燃烧过程具有重要意义.基于耦合详细化学反应动力学机理的高精度数值模拟,分析了化学反应对超音速混合层发展过程的影响.主要分析了在两种燃烧状态下化学反应对混合层的演化过程和混合层厚度的影响,此外从涡动力学角度,分析了化学反应对混合层厚度的影响机理.     

The structure and dynamics of reacting plane mixing layers

The reacting two-dimensional plane mixing layer has been studied in two configurations: a rearward facing step and a two-stream mixing layer. Observations have been made of the steady state behavior, and the unsteady behavior when the flow was forced by a specific acoustic frequency. The steady behavior of the mean properties of the reacting flows is similar to that of non-reacting free shear flows except for the global effects of thermodynamic property changes. The structure of these flows is qualitatively similar to that of non-reacting flows. Vortices form by the two-dimensional Kelvin-Helmholtz instability and grow by subharmonic combination until the mixing layer interacts with the walls. Entrainment is dominated by the two-dimensional vortex motion. Three-dimensional instabilities give rise to secondary vortices which are coherent over several Kelvin-Helmholtz structures and dominate the fine scale mixing process. The mixing transition corresponds to a loss of coherence in the layer. Unsteady behavior occurs when there are resonant interactions with the Kelvin-Helmholtz instability or the instability associated with the recirculation vortex in the rearward facing step flow. Modeling efforts are reported which show promise of simulating the essential features of plane mixing layers.A version of this paper was presented at the ASME Winter Annual Meeting of 1984 and printed in AMD-Vol. 66     

Vortex structure simulation for supersonic mixing layers using nonlinear PSE method

The method of nonlinear parabolized stability equations (PSE) is applied in the simulation of vortex structures in compressible mixing layer. The spatially-evolving unstable waves, which dominate the vortex structure, are investigated through spatial marching method. The instantaneous flow field is obtained by adding the harmonic waves to basic flow. The results show that T-S waves do not keep growing exponentially as the linear evolution, the energy transfer to high order harmonic modes, and that finally all harmonic modes get saturated due to nonlinear interaction. The mean flow distortion induced by the nonlinear interaction between the harmonic modes and their conjugate harmonic ones, makes great change of the average flow and increases the thickness of mixing layer. PSE methods can well capture the two- and three-dimensional large scale nonlinear vortex structures in mixing layers such as vortex roll-up, vortex pairing, and Λ vortex.     

Numerical simulation of three-dimensional instability of flow past a short cylinder

The plane-parallel flow past an infinitely long circular cylinder becomes three-dimensional starting with Reynolds numbers Re ≈ 190. The corresponding instability mode is called mode A. When Re ≈ 260, vortex structures with a smaller cross scale are formed in the wake as a result of a secondary three-dimensional instability (mode B). The transition to three-dimensionality for a short cylinder bounded by planes is considered. The length of the cylinder is chosen to eliminate the unstable perturbations of mode A. Two instability modes similar to modes A and B modified under the effect of the bounding lateral planes are found. The problems of three-dimensional flow are numerically solved using the Navier-Stokes equations.     

Numerical prediction of isothermally reacting mixing layer using vortex‐in‐cell and filtered density function

A large eddy simulation based on the filtered vorticity transport equation and the filtered density function (FDF) transport equation developed in an earlier study is extended to predict a chemically reacting flow with no heat release. The filtered vorticity transport equation is solved using the vortex‐in‐cell scheme in conjunction with the dynamic eddy viscosity subgrid‐scale models. The transport equation for FDF is solved using the Lagrangian Monte‐Carlo method. The methodology is tested on a chemically reacting spatially growing mixing layer with no heat release. The effects of Damköhler number (Da) on the concentration structure of the reacting mixing layer, the mean reactant and product concentrations and on the reactant FDF are investigated. It is shown that mixing has a greater effect on scalar field within the vortex structure as compared with the braid regions. Also for high Da, the reaction zones are mainly limited to the thin reacting interfacial zones, i.e. the contact zone between the reactants, whereas for low Da, the reacting zones are spread as reacting pockets within the vortex structure. The effects of Da on mean reactant and product concentrations, root‐mean‐square concentration fluctuations and probability density are discussed. Copyright © 2010 John Wiley & Sons, Ltd.     

Numerical study on the turbulent mixing of planar shock-accelerated triangular heavy gases interface

The interaction of a planar shock wave with a triangle-shaped sulfur hexafluoride (\(\mathrm{SF_6}\)) cylinder surrounded by air is numerically studied using a high resolution finite volume method with minimum dispersion and controllable dissipation reconstruction. The vortex dynamics of the Richtmyer–Meshkov instability and the turbulent mixing induced by the Kelvin–Helmholtz instability are discussed. A modified reconstruction model is proposed to predict the circulation for the shock triangular gas–cylinder interaction flow. Several typical stages leading the shock-driven inhomogeneity flow to turbulent mixing transition are demonstrated. Both the decoupled length scales and the broadened inertial range of the turbulent kinetic energy spectrum in late time manifest the turbulent mixing transition for the present case. The analysis of variable-density energy transfer indicates that the flow structures with high wavenumbers inside the Kelvin–Helmholtz vortices can gain energy from the mean flow in total. Consequently, small scale flow structures are generated therein by means of nonlinear interactions. Furthermore, the occasional “pairing” between a vortex and its neighboring vortex will trigger the merging process of vortices and, finally, create a large turbulent mixing zone.     

An experimental study of the large scale coherent structures in a forced free shear layer

The dynamic characteristics of the large scale coherent structures in a forced free shear layer are experimentally studied by means of flow visualization. The quantitative measurements are acquired by the use of a LDV. It is shown that the development of the coherent structures can be greatly influenced by upstream artificial perturbations and as a result the mixing in the layer can be controlled. Like vortex merging, vortex splitting is also a common evolution pattern in the development of the coherent structures.     

Some features of a turbulent wing–body junction vortical flow

Laser-Doppler velocimeter measurements of a wing/body junction flow field made within a plane to the side of the wing/wall junction and perpendicular both to a 3:2 elliptical nose—NACA 0020 tail wing, and a flat wall are presented. Reynolds number of the approach boundary layer was, Re_θ = 5940, and free-stream air velocity was, U_ref = 27.5 m/s. A large vortical structure residing in the outer region redirects the low-turbulence free-stream flow to the vicinity of the wing/wall junction, resulting in thin boundary layers with velocity magnitudes higher than free-stream flow. Lateral pressure gradients result in a three-dimensional separation on the uplifting side of the vortex. Additionally, a high vorticity vortical structure with opposite sense to the outer-layer vortex forms beneath the outer-layer vortex. Normal and shear stresses increase to attain values an order of magnitude larger compared to values measured in a three-dimensional boundary layer just outside the junction vortex. Bimodal histograms of the w fluctuating velocity occur under the outer-layer vortex near the wall due to the time-dependent nature of the horseshoe vortex. In such a flow the shear-stress angle (SSA) highly lags the flow-gradient angle (FGA), and the turbulence diffusion is highly altered due to presence of vortical structures.     

Cycle resolved multi-planar flow measurements in a four-valve combustion engine

The non-reacting flow in a one-cylinder four-valve combustion engine is measured via cycle resolved two-component/two-dimensional (2C/2D) particle-image velocimetry (PIV). The three-dimensional structure of the velocity field is analyzed based on the flow field measured in eight planar planes within the cylinder for several crank angles during the intake and compression phase. Using the mean and statistical values of the single planes quasi three-dimensional flow fields are reconstructed for crank angles of 80°, 160°, and 240° atdc. This enables the detailed analysis of the spatial distribution of the large and small scale flow structures, e.g., by visualizing large vortical structures and the distribution of the turbulent kinetic energy. It was found that two ring vortices evolving beneath the inlet valves are the dominant large scale structures that seem to be of major concern for the mixing process in the cylinder of a four-valve combustion engine operated at 1500 rpm. Furthermore, the temporal evolution of the flow field within the symmetry plane of the cylinder, measured for crank angles between 40° and 320° atdc in steps of 20°, is discussed. The results give new insight into the complex three-dimensional flow in the combustion chamber of a one-cylinder four-valve combustion engine. That is, the tumble vortex only seems to be of secondary importance for the flow concerning the mixing process at 1500 rpm. This is an essential result for future work considering the fluid mechanics of fuel-air-interaction processes and mixing principles in combustion engines.     

Topological visualisation of focal structures in free shear flows

This paper describes a method for identifying and visualising the three-dimensional geometry of focal (vortex) structures in complex flows. The method is based primarily on the classification of the local topology as it is identified from the values of the velocity gradient tensor invariants. The identification of the local topology is reference frame invariant. Therefore, focal (vortex) structures can be unambiguously identified in these flows. A novel flow visualisation method is introduced whereby focal structures are rendered using a solid model view of the local topology. This new approach is applied to the identification of focal structures in three-dimensional plane mixing layer and plane wake flows.     

Reconnections of vortex filaments

The process of break-down and reconnection of vortex filaments is considered by the method of three-dimensional vortex singularities (vortons) in various situations, including oblique interaction of a vortex ring with a boundary in shear flow, shedding of a vortex ring from a horseshoe vortex, instability of elliptic vortex ring, Crow instability of two perturbed antiparallel vortex filaments, merging and subsequent splitting of vortex rings. Special attention is paid to the global integrals (vorticity, momentum, angular momentum) and to the inviscid dissipation of energy. The visualization of the effective vortex core, created by the interference of the vorticity fields of vortons, is presented. The comparisons with other methods of simulation of three-dimensional vortex interactions and with the observations have been made.