A numerical study on the effect of a heated hollow cylinder on mixed convection in a ventilated cavity

The present work is aimed to study mixed convection heat transfer characteristics within a ventilated square cavity having a heated hollow cylinder. The heated hollow cylinder is placed at the center of the cavity. In addition, the wall of the cavity is assumed to be adiabatic. Flows are imposed through the inlet at the bottom of the left wall and exited at the top of the right wall of the cavity. The present study simulates a practical system such as air-cooled electronic equipment with a heat component or an oven with heater. Emphasis is sited on the influences of the cylinder diameter and the thermal conductivity of the cylinder in the cavity. The consequent mathematical model is governed by the coupled equations of mass, momentum and energy and solved by employing Galerkin weighted residual method of finite element formulation. A wide range of pertinent parameters such as Reynolds number, Richardson number, cylinder diameter and the solid-fluid thermal conductivity ratio are considered in the present study. Various results such as the streamlines, isotherms, heat transfer rates in terms of the average Nusselt number and average fluid temperature in the cavity are presented for different aforesaid parameters. It is observed that the cylinder diameter has significant effect on both the flow and thermal fields but the solid-fluid thermal conductivity ratio has significant effect only on the thermal field.     

Numerical analysis of fluid flow due to mixed convection in a lid-driven cavity having a heated circular hollow cylinder

Mixed convection heat transfer in a lid-driven cavity along with a heated circular hollow cylinder positioned at the center of the cavity has been analyzed numerically. The present study simulates a realistic system such as air-cooled electronic equipment with a heat component or an oven with heater. A Galerkin weighted residual finite element method with a Newton–Raphson iterative algorithm is adopted to solve the governing equations. The computation is carried out for wide ranges of the Richardson numbers, cylinder diameter and solid fluid thermal conductivity ratio. Results are presented in the form of streamlines, isothermal lines, average Nusselt number at the heated surface and fluid temperature in the cavity for the mentioned parameters. It is found that the flow field and temperature distribution strongly depend on the cylinder diameter and also the solid–fluid thermal conductivity ratio at the three convective regimes.     

Natural convection in cavities with a thin fin on the hot wall

A numerical study has been carried out in differentially heated square cavities, which are formed by horizontal adiabatic walls and vertical isothermal walls. A thin fin is attached on the active wall. Heat transfer by natural convection is studied by numerically solving equations of mass, momentum and energy. Streamlines and isotherms are produced, heat and mass transfer is calculated. A parametric study is carried out using following parameters: Rayleigh number from 10⁴ to 10⁹, dimensionless thin fin length from 0.10 to 0.90, dimensionless thin fin position from 0 to 0.90, dimensionless conductivity ratio of thin fin from 0 (perfectly insulating) to 60. It is found that Nusselt number is an increasing function of Rayleigh number, and a decreasing function of fin length and relative conductivity ratio. There is always an optimum fin position, which is often at the center or near center of the cavity, which makes heat transfer by natural convection minimized. The heat transfer may be suppressed up to 38% by choosing appropriate thermal and geometrical fin parameters.     

Heat and fluid flow characteristics inside differentially heated square enclosures with single and multiple sliding walls

Fluid flow and heat transfer characteristics of differentially heated lid driven cavities are numerically modeled and analyzed in the present study. One‐, two‐, and four‐sided lid driven cavity configurations are considered with the vertical walls being maintained at different temperatures and the horizontal walls being thermally insulated. Eight different cavity configurations are considered depending on the direction of wall motion. The Prandtl number Pr is taken to be 0.7, the Grashof number is taken to be 10⁴, while two values for the Richardson number Ri are considered, 0.1 and 10. It is found that both the Richardson number and the cavity configuration affect the heat and fluid flow characteristics in the cavity. It is concluded that for Ri=0.1, a four‐sided driven cavity configuration with all walls rotating in the same direction would triple the value of the average Nusselt number at the cold wall when compared to a one‐sided driven cavity configuration. However, for Ri=10, the cavity configuration has minimal effect and all eight cases result in an average Nusselt number value at the cold wall ranging between 1.3 and 1.9. © 2009 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley InterScience ( www.interscience. wiley.com ). DOI 10.1002/htj.20264     

Natural convection in divided trapezoidal cavities filled with fluid saturated porous media

A numerical work was performed to determine the heat transfer and fluid flow due to buoyancy forces in divided trapezoidal enclosures filled with fluid saturated porous media. In the present investigation, bottom wall was non-uniformly heated while two vertical walls were insulated and the top wall was maintained at constant cold temperature. The divider had constant thermal conductivity. Flow patterns and temperature distribution were obtained by solving numerically the governing equations, using Darcy's law. Results are presented for different values of the governing parameters, such as Rayleigh number for a porous medium, location of the partition, thickness of the partition and thermal conductivity ratio between solid and fluid media. It was observed that the conduction mode of heat transfer became dominant inside the cavity for higher thickness of the partition, low Rayleigh numbers, and low thermal conductivity ratio.     

Optimization of Mixed Convection in a Lid-Driven Enclosure with a Heat Generating Circular Body

The physical model considered here is a lid-driven enclosure with bottom heating and top cooling conditions, and a heat generating circular body is placed at the center. The vertical walls of the cavity are kept thermally insulated, and the top lid moves at a constant speed. The steady two-dimensional governing equations for the physical problem are transformed in a dimensionless form with dimensionless governing parameters that decide the fluid flow and heat transfer characteristics in the system. The solution of these transport equations is obtained numerically with the finite element approach using the Galerkin method of weighted residuals. The parametric study has been carried out for variation of the heat generation parameters, the Reynolds numbers, solid-fluid thermal conductivity ratios as well as the Richardson numbers. The working fluid is assigned as air with a Prandtl number of 0.71 throughout the simulation. Results are presented in the form of streamlines, isotherms, average Nusselt number, bulk temperature, and drag force for the afore mentioned parameters. The numerical results indicate the strong influence of the mentioned parameters on the flow structure and heat transfer as well as average Nusselt number, average bulk temperature, and drag force. An optimum combination of the governing parameters would result in higher heat transfer and lower drag force.     

Non-uniform porosity and thermal dispersion effects on natural convection about a heated horizontal cylinder in an enclosed porous medium

A numerical solution has been obtained for transient two-dimensional natural convection from a heated horizontal cylinder embedded in an enclosed porous medium. Non-Darcian effects are taken into consideration in the momentum equation, while the thermal dispersion effect is taken into consideration in the energy equation. The wall effect on porosity is approximated by an exponential function and its effect on thermal dispersion is modeled by a dispersive length. The governing equations in terms of the stream function, vorticity, and temperature are expressed in a body-fitted coordinate system, which were solved numerically by the finite difference method. Results are presented for the streamlines and isotherms, tangential velocity and temperature distributions, as well as the average Nusselt numbers at different values of Rayleigh number, dimensionless particle diameter, and Prandtl number. The non-uniform porosity effect tends to increase the temperature gradient near the wall while the thermal dispersion effect increases the effective thermal conductivity, both resulting in an increase in surface heat flux. The effect of thermal dispersion on natural convection in porous media at low to moderate Rayleigh number is small. With nonuniform porosity and thermal dispersion effects taken into consideration, the predicted average Nusselt numbers are found to be in better agreement with experimental data.     

Visualization of heat flow using Bejan’s heatline due to natural convection of water near 4 °C in thick walled porous cavity

A numerical study on natural convection heat transfer of cold water near 4 °C in a thick bottom walled cavity filled with a porous medium has been performed. It is assumed that the cavity is isothermally heated from the outside of the thick bottom wall and cooled from ceiling. The finite-difference method has been used to solve the governing partial differential equations of heat and fluid flow. Effects of thermal conductivity ratio, Rayleigh number and bottom wall thickness on heat transfer from the bottom to the ceiling have been studied. The heatline visualization technique has been used to demonstrate the path of heat transport through the enclosure. Moreover, streamlines and isotherms have been used to present fluid flow and temperature distributions. The obtained results show that multiple circulation cells are formed in the cavity and the local Nusselt numbers at the bottom wall and solid–fluid interface are highly affected by formed cells. The increase of Rayleigh number and thermal conductivity ratio increases heat transfer through the cavity. However, the increase of thickness of the bottom wall reduces the mean Nusselt number. Almost one-dimensional conduction heat transfer is observed in the solid bottom wall of the cavity.     

Effects of thin fin on natural convection in porous triangular enclosures

A two-dimensional solution of natural convection in solid adiabatic thin fin attached to porous right triangular enclosures has been analyzed numerically. The vertical wall of the enclosure is insulated while the bottom and the inclined walls are isothermal. The temperature of the bottom wall is higher than the temperature of the inclined wall. Governing equations, which are written using Darcy model, are solved via the finite difference technique. The Successive Under Relaxation (SUR) method was used to solve linear algebraic equations. Dimensionless location of the thin fin from 0.2 to 0.6, the aspect ratio of triangular enclosure from 0.25 to 1, Rayleigh number from 100 to 1000 and the dimensionless height of the fin from 0.1 to 0.4 are used as governing parameters that are effective on heat transfer and fluid flow. Results for the mean Nusselt number, velocity profiles, the contour maps of the streamlines and isotherms are presented. It is observed that the thin fin can use as a passive control element for flow field, temperature distribution and heat transfer.     

Natural convection in porous triangular enclosures with a solid adiabatic fin attached to the horizontal wall

A numerical analysis has been performed to investigate the effects of fin location onto the bottom wall of a triangular enclosure filled with porous media whose height base ratio is 1. The temperature of the bottom wall is higher than that of the inclined wall while the vertical wall is insulated. Thus, the fin divides the heated bottom wall to two separate regions. Finite difference method was applied to solve governing equations which are written using Darcy method. Solutions of algebraic equations were made by Successive Under Relaxation (SUR) technique. The effective parameters on flow and temperature fields are: Rayleigh number, location center of fin, dimensionless fin height, and dimensionless fin width. The obtained results indicated that the fin can be used as a control element for heat transfer and fluid flow.     

EFFECT OF HEATED WALL POSITION ON MIXED CONVECTION IN A CHANNEL WITH AN OPEN CAVITY

Mixed convection in an open cavity with a heated wall bounded by a horizontally insulated plate is studied numerically. Three basic heating modes are considered: (a) the heated wall is on the inflow side (assisting flow); (b) the heated wall is on the outflow side (opposing flow); and (c) the heated wall is the horizontal surface of the cavity (heating from below). Mixed convection fluid flow and heat transfer within the cavity is governed by the buoyancy parameter, Richardson number (Ri), and Reynolds number (Re). The results are reported in terms of streamlines, isotherms, wall temperature, and the velocity profiles in the cavity for Ri=0.1 and 100, Re=100 and 1000, and the ratio between the channel and cavity heights (H/D) is in the range 0.1-1.5. The present results show that the maximum temperature values decrease as the Reynolds and the Richardson numbers increase. The effect of the H/D ratio is found to play a significant role on streamline and isotherm patterns for differentheating configurations. The present investigation shows that the opposing forced flow configuration has the highest thermal performance in terms of both maximum temperature and average Nusselt number.     

Effect of anisotropy on the development of convective boundary layer flow in porous media

The effects of anisotropy on the development of thermal boundary layer flow in a rectangular porous cavity is studied. The side walls of the cavity are respectively heated and cooled isothermally. Top and bottom walls are insulated. The porous medium is anisotropic both in permeability and thermal conductivity with its principal axes oriented in a direction that is oblique to the gravity vector. Scale analysis is applied to predict the orders of magnitude involved in the boundary layer regime. In the large Rayleigh number limit, the governing boundary layer equations are solved in closed form, using an intergral approach. A finite difference method is used to obtain numerical solutions of the full governing equations. The effects of the anisotropy in permeability and thermal conductivity on the development of free convective boundary layer flow are found to be significant.     

Mixed convection in a lid driven square cavity with an isothermally heated square blockage inside

Laminar mixed convection characteristics in a square cavity with an isothermally heated square blockage inside have been investigated numerically using the finite volume method of the ANSYS FLUENT commercial CFD code. Various different blockage sizes and concentric and eccentric placement of the blockage inside the cavity have been considered. The blockage is maintained at a hot temperature, T_h, and four surfaces of the cavity (including the lid) are maintained at a cold temperature, T_c, under all circumstances. The physical problem is represented mathematically by sets of governing conservation equations of mass, momentum, and energy. The geometrical and flow parameters for the problem are the blockage ratio (B), the blockage placement eccentricities (?_x and ?_y), the Reynolds number (Re), the Grashof number (Gr), and the Richardson number (Ri). The flow and heat transfer behavior in the cavity for a range of Richardson number (0.01–100) at a fixed Reynolds number (100) and Prandtl number (0.71) is examined comprehensively. The variations of the average and local Nusselt number at the blockage surface at various Richardson numbers for different blockage sizes and placement eccentricities are presented. From the analysis of the mixed convection process, it is found that for any size of the blockage placed anywhere in the cavity, the average Nusselt number does not change significantly with increasing Richardson number until it approaches the value of the order of 1 beyond which the average Nusselt number increases rapidly with the Richardson number. For the central placement of the blockage at any fixed Richardson number, the average Nusselt number decreases with increasing blockage ratio and reaches a minimum at around a blockage ratio of slightly larger than 1/2. For further increase of the blockage ratio, the average Nusselt number increases again and becomes independent of the Richardson number. The most preferable heat transfer (based on the average Nusselt number) is obtained when the blockage is placed around the top left and the bottom right corners of the cavity.     

Investigation of Mixed Convection in a Ventilated Cavity in the Presence of a Heat Conducting Circular Cylinder

The study is aimed to investigate the mixed convective transport within a ventilated square cavity in presence of a heat conducting circular cylinder. The fluid flow is imposed through an opening at the bottom of the left cavity wall and is taken away by a similar opening at the top of the right cavity wall. The cylinder is placed at the center of the cavity. Two cases are considered depending on the thermal conditions of the cavity walls. In the first case, the left and right vertical walls are kept isothermal with different temperatures and the top and bottom horizontal walls are considered as thermally insulated. For the second case, the top and bottom walls are maintained at different constant temperatures and the left and right walls are considered adiabatic. Heat transfer due to forced flow, thermal buoyancy, and conduction within the cylinder are taken into account. Effect of the cylinder size (0.1 ≤ D ≤ 0.5) and the solid–fluid thermal conductivity ratio (0.1 ≤ K ≤ 10) are explored for various values of Richardson number (0 ≤ Ri ≤ 5) at fixed Reynolds (Re = 100) and Prandtl (Pr = 0.71) numbers. The fluid dynamic and thermal transport phenomena are depicted through streamline and isotherm plots. Additionally, the global thermal parameters such as the average Nusselt number and average fluid temperature of the cavity are presented. It is found that the aforementioned parameters have significant influences on the fluid flow and heat transfer characteristics in the cavity.     

Numerical study of mixed convective cooling in a square cavity ventilated and partially heated from the below utilizing nanofluid

A numerical investigation of mixed convection flows through a copper–water nanofluid in a square cavity with inlet and outlet ports has been executed. The natural convection effect is attained by heating from the constant flux heat source which is symmetrical located at the bottom wall and cooling from the injected flow. The governing equations have been solved using the finite volume approach, using SIMPLE algorithm on the collocated arrangement. The study has been carried out for the Reynolds number in the range 50 ≤ Re ≤ 1000, with Richardson numbers 0 ≤ Ri ≤ 10 and for solid volume fraction 0 ≤ ? ≤ 0.05. The thermal conductivity and effective viscosity of nanofluid have been calculated by Patel and Brinkman models, respectively. Results are presented in the form of streamlines, isotherms, average Nusselt number and average bulk temperature. In addition, the effects of solid volume fraction of nanofluids on the hydrodynamic and thermal characteristics have been investigated and discussed. The results indicate that increase in solid concentration leads to increase in the average Nusselt number at the heat source surface and decrease in the average bulk temperature.     

Comparison of Mixed Convection in a Square Cavity with an Oscillating versus a Constant Velocity Wall

This article presents a numerical investigation of unsteady laminar mixed convection heat transfer in a two-dimensional square cavity. The cavity is configured such that one of the vertical walls is cooled and slides either with a constant speed or with a sinusoidal oscillation. A portion of the opposite stationery wall is heated by a constant temperature heat source while, the remaining walls of the cavity are thermally insulated. Different configurations of sliding wall movement and a series of Richardson numbers and Strouhal numbers are tested. The results indicate that the direction and magnitude of the sliding wall velocity affect the heat transfer rate. At low Richardson numbers, the average heat transfer rate for the cavity with an oscillating wall is found to be lower compared to that for the cavity with a constant velocity wall. In addition, at a fixed Richardson number, as the Strouhal number decreases the oscillation frequency of average Nusselt number on the vertical walls decreases; however, the oscillation amplitude of average Nusselt number increases.     

Laminar Mixed-Convection Heat Transfer in a Lid-Driven Cavity with Modified Heated Wall

In this numerical study, steady laminar mixed-convection heat transfer in a two-dimensional square lid-driven cavity with a modified heated wall is investigated over a range of Richardson numbers, including 0.01, 1, and 10. The heated bottom wall of the cavity is characterized by rectangular, triangular, and sinusoidal wave shapes. The cooled top wall of the cavity is sliding with constant velocity, while the vertical walls are kept stationary and adiabatic. The governing equations are solved using a finite-volume technique. The results are presented in the form of streamlines, isotherms, and Nusselt number plots. The effects of the number of undulations and the amplitude on the flow field and heat transfer are also investigated. The predicted results demonstrate that the heat transfer enhancement is generally observed with the modification of the heated wall, while the improvement is found to be more profound for the case of rectangular wave and at low Richardson number.     

Effect of Heat-Generating Solid Body on Mixed Convection Flow in a Ventilated Cavity

The mixed convection flow and heat transfer characteristics inside a square ventilated cavity with a heat-generating solid circular body located at the center have been investigated numerically. The inlet opening is at the bottom of the left wall, while the outlet one is at the top of the right wall, and all the walls of the cavity are considered to be adiabatic. A Galerkin weighted residual finite element method is used to solve the governing equations of mass, momentum, and energy. The behavior of the fluid in the ranges of dimensionless cylinder diameter from 0.1 to 0.6 of the heat generating body, thermal conductivity ratio range from 0.2 to 50 between solid and fluid, and heat generating parameter range from 1 to 5 is described in detail. The medium considered is air with a Prandtl number of 0.71. It is found that the flow and temperature field is strongly dependent on the already-mentioned parameters for the ranges considered. The variation of the mean Nusselt number, the dimensionless average drag force, and the average temperature of the fluid versus Richardson number are presented for these parameters.     

Double‐diffusive natural convection in a partially heated enclosure using a nanofluid

This paper analyzes numerically the effect of double‐diffusive natural convection of a water–Al₂O₃ nanofluid in a partially heated enclosure with Soret and Dufour coefficients. The top horizontal wall has constant temperature T_c, while the bottom wall is partially heated T_h, with T_h > T_c . The concentration in the top wall is maintained higher than the bottom wall C_c < C_h. The remaining bottom wall and the two vertical walls are considered adiabatic. Water is considered as the base fluid. The governing equations are solved by the Penalty Finite Element Method using Galerkin's weighted residual scheme. The effect of the parameters, namely, Rayleigh number and solid volume fraction of the nanoparticles on the flow pattern and heat and mass transfer has been depicted. Comprehensive average Nusselt and Sherwood numbers, average temperature and concentration, and mid‐height horizontal and vertical velocities at the middle of the cavity are presented as functions of the governing parameters mentioned above. © 2012 Wiley Periodicals, Inc. Heat Trans Asian Res; Published online in Wiley Online Library ( wileyonlinelibrary.com/journal/htj ). DOI 10.1002/htj.21010     

Natural convection in porous cavity with sinusoidal bottom wall temperature variation

Numerical study of natural convection in a porous cavity is carried out in the present paper. Natural convection is induced when the bottom wall is heated and the top wall is cooled while the vertical walls are adiabatic. The heated wall is assumed to have spatial sinusoidal temperature variation about a constant mean value which is higher than the cold top wall temperature. The non-dimensional governing equations are derived based on the Darcy model. The effects of the amplitude of the bottom wall temperature variation and the heat source length on the natural convection in the cavity are investigated for Rayleigh number range 20–500. It is found that the average Nusselt number increases when the length of the heat source or the amplitude of the temperature variation increases. It is observed that the heat transfer per unit area of the heat source decreases by increasing the length of the heated segment.