Susceptibility of Lasioderma serricorne (Coleoptera: Anobiidae) life stages to elevated temperatures used during structural heat treatments

Heat treatment of food-processing facilities involves using elevated temperatures (50-60 degrees C for 24-36 h) for management of stored-product insects. Heat treatment is a viable alternative to the fumigant methyl bromide, which is phased out in the United States as of 2005 because of its adverse effects on the stratospheric ozone. Very little is known about responses of the cigarette beetle, Lasioderma serricorne (F.) (Coleoptera: Anobiidae), a pest associated with food-processing facilities, to elevated temperatures. Responses of L. serricorne life stages to elevated temperatures were evaluated to identify the most heat-tolerant stage. Exposure of eggs, young larvae, old larvae, and adults during heat treatment of a food-processing facility did not clearly show a life stage to be heat tolerant. In the laboratory, exposure of eggs, young larvae, old larvae, pupae, and adults at fixed times to 46, 50, and 54 degrees C and 22% RH indicated eggs to be the most heat-tolerant stage. Time-mortality responses at each of these three temperatures showed that the time for 99% mortality (LT99) based on egg hatchability and egg-to-adult emergence was not significantly different from one another at each temperature. Egg hatchability alone can be used to determine susceptibility to elevated temperatures between 46 and 54 degrees C. The LT99 based on egg hatchability and egg-to-adult emergence at 46 degrees C was 605 and 598 min, respectively, and it decreased to 190 and 166 min at 50 degrees C and 39 and 38 min at 54 degrees C. An exponential decay equation best described LT99 as a function of temperature for pooled data based on egg hatchability and egg-to-adult emergence. Our results suggest that during structural heat treatments eggs should be used in bioassays for gauging heat treatment effectiveness, because treatments aimed at controlling eggs should be able to control all other L. serricorne life stages.     

Time-mortality relationships for Tribolium castaneum (Coleoptera: Tenebrionidae) life stages exposed to elevated temperatures

The use of elevated temperatures (> or = 40-60 degrees C) or heat treatments for managing insects in food-processing facilities is a viable alternative to space fumigation with methyl bromide. Quantitative data are lacking on the responses of life stages of the red flour beetle, Tribolium castaneum (Herbst), an important pest of food-processing facilities worldwide, to elevated temperatures used during heat treatments. We determined time-mortality relationships for eggs, young (neonate) larvae, old larvae, pupae, and adults of T. castaneum, exposed to constant temperatures of 42, 46, 50, 54, 58, and 60 degrees C. Generally, mortality of each stage increased with an increase in temperature and exposure time. Young larvae were the most heat-tolerant stage, especially at temperatures > or = 50 degrees C. Exposure for a minimum of 7.2 h at > or = 50 degrees C was required to kill 99% of young larvae, whereas the other stages required < or = 1.8 h. Heat treatments that control young larvae should control all other stages of T. castaneum, and young larvae should be used as test insects to evaluate efficacy against T. castaneum during an actual facility heat treatment. These results provide the basis for successful use of elevated temperatures for management of T. castaneum life stages associated with food-processing facilities.     

Relative susceptibility of Tribolium confusum life stages exposed to elevated temperatures

Methyl bromide, a space fumigant used in food-processing facilities, may be phased out in the United States by 2005. The use of elevated temperatures or heat treatment is gaining popularity as a methyl bromide alternative. During heat treatment, the temperature of the whole food-processing facility, or a portion of it, is raised and held between 50 and 60 degrees C for 24-36 h to kill stored-product insects. We determined time-mortality responses of the confused flour beetle, Tribolium confusum (Jacquelin du Val), eggs, young larvae, old larvae, pupae, and adults exposed to six constant temperatures between 46 and 60 degrees C. Responses of all five insect stages also were measured using exposure times of 160, 40, and 12 min at 46, 50, and 60 degrees C, respectively. Time-mortality responses of all T. confusum life stages increased with an increase in exposure time and temperature. Both time-mortality and fixed time responses showed eggs and young larvae to be most susceptible at elevated temperatures and old larvae to be least susceptible. Our results suggest that old larvae should be used as test insects to gauge heat treatment effectiveness, because heat treatment aimed at controlling old larvae should be able to control all other T. confusum life stages. Besides providing baseline data for successful use of heat treatments, time-mortality data collected at the six temperatures can be used for developing thermal death kinetic models for this species to predict mortality during actual facility heat treatments.     

Cold hardiness of Habrobracon hebetor (Say) (Hymenoptera: Braconidae), a parasitoid of pyralid moths

The ectoparasitoid Habrobracon hebetor (Say) attacks stored-product infesting pyralid moths that are able to overwinter under extremely cold conditions. The extent to which H. hebetor can withstand these conditions is not known, but has important implications for the ability of H. hebetor to provide long-term suppression of these pests in temperate climates. We investigated basic cold hardiness aspects of a mutant eye-color strain of H. hebetor. Feeding larvae and adults of H. hebetor had supercooling points (SCPs) at temperatures higher than those of eggs and pupae. Mean SCPs of females and males were equivalent, as were those of naked and silk-encased pupae. Feeding on honey prior to being subjected to low temperatures significantly increased the SCP of adult females by approximately 8 degrees C. Mortality of pupae and adults increased significantly whenever the temperature dropped below the mean SCP, indicating that H. hebetor does not tolerate freezing. For pupae and adults exposed to -12 and -5 degrees C, the hourly mortality rate increased with time of exposure. Pupae and adults exposed to -12 degrees C for different time intervals showed high mortality after only 1d of exposure. At -5 degrees C, none survived 12d of exposure. A better understanding of how well this parasitoid tolerates low temperatures will be useful in evaluating its potential as a biological control agent of stored-product moths in temperate regions.     

Dynamic model for predicting survival of mature larvae of Tribolium confusum during facility heat treatments

Structural heat treatment, a viable alternative to methyl bromide fumigation, involves raising the ambient temperature of food-processing facilities between 50 and 60 degrees C by using gas, electric, or steam heaters, and holding these elevated temperatures for 24 h or longer to kill stored-product insects. A dynamic model was developed to predict survival of mature larvae, which is the most heat-tolerant stage of the confused flour beetle, Tribolium confusum (Jacquelin du Val), at elevated temperatures between 46 and 60 degrees C. The model is based on two nonlinear relationships: 1) logarithmic survival of T. confusum mature larvae as a function of time, and 2) logarithmic reduction in larval survival as a function of temperature. The dynamic model was validated with nine independent data sets collected during actual facility heat treatments conducted on two separate occasions at the Kansas State University pilot flour and feed mills. The rate of increase of temperature over time varied among the nine locations where mature larvae of T. confusum were exposed, and the approximate heating rates during the entire heat treatment ranged from 1.1 to 13.2 degrees C/h. The absolute deviation in the predicted number of larvae surviving the heat treatment was within 3-7% of the actual observed data. Comparison of the absolute deviation in the time taken for equivalent larval survival showed that the model predictions were within 2-6% of the observed data. The dynamic model can be used to predict survival of mature larvae of T. confusum during heat treatments of food-processing facilities based on time-dependent temperature profiles obtained at any given location.     

Susceptibility of Plodia interpunctella (Lepidoptera: Pyralidae) developmental stages to high temperatures used during structural heat treatments

Heating the ambient air of a whole, or a portion of a food-processing facility to 50 to 60 degrees C and maintaining these elevated temperatures for 24 to 36 h, is an old technology, referred to as heat treatment. There is renewed interest in adopting heat treatments around the world as a viable insect control alternative to fumigation with methyl bromide. There is limited published information on responses of the Indian meal moth, Plodia interpunctella (Hübner), exposed to elevated temperatures typically used during heat treatments. Time-mortality relationships were determined for eggs, fifth-instars (wandering-phase larvae), pupae, and adults of P. interpunctella exposed to five constant temperatures between 44 and 52 degrees C. Mortality of each stage increased with increasing temperature and exposure time. In general, fifth-instars were the most heat-tolerant stage at all temperatures tested. Exposure for a minimum of 34 min at 50 degrees C was required to kill 99% of the fifth-instars. It is proposed that heat treatments aimed at controlling fifth-instars should be able to control all other stages of P. interpunctella.     

Impact of varying levels of sanitation on mortality of Tribolium castaneum eggs and adults during heat treatment of a pilot flour mill

The influence of sanitation on responses of life stages of the red flour beetle, Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae), an economically important pest in flour mills, was investigated in a pilot flour mill subjected to two, 24-h heat treatments. One hundred eggs or 100 adults of T. castaneum were exposed inside each 20-cm diameter by 15-cm high PVC rings holding 0.1-, 0.2-, 1.0-, 3.0-, 6.0-, and 10.0-cm-deep wheat flour to simulate different sanitation levels that may exist in a flour mill. These rings were placed on the first and third floors of a pilot flour mill. On the first floor, temperatures inside rings with eggs reached 50 degrees C in 7-11 h only in 0.1- and 0.2-cm-deep flour treatments. In all other treatments the maximum temperatures attained generally were below 50 degrees C and inversely related to flour depth. Adults of T. castaneum on this floor were less susceptible than eggs. The egg mortality decreased linearly with an increase in flour depth, whereas that of adults decreased exponentially. All eggs and adults in rings on the third floor were killed irrespective of flour depth, because temperatures inside rings reached 50 degrees C in 15-17 h and were held above 50 degrees C for 6-8 h with the maximum temperatures ranging between 55.0 and 57.0 degrees C. Although the protective effects of flour on survival of T. castaneum eggs and adults were evident only if temperatures did not reach 50 degrees C, removal of flour accumulations is essential to improve heat treatment effectiveness.     

Susceptibility of Tribolium castaneum life stages exposed to elevated temperatures during heat treatments of a pilot flour mill: influence of sanitation, temperatures attained among mills floors, and costs

The influence of sanitation on responses of life stages of the red flour beetle, Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae), was investigated in a pilot flour mill subjected to three, 24-h heat treatments by using forced-air gas heaters fueled by propane. Two sanitation levels, dusting of wheat flour and 2-cm-deep flour, were created in 25 plastic bioassay boxes, each holding eggs, young larvae, old larvae, pupae, and adults of T. castaneum plus two temperature sensors. Data loggers (48) were placed on the five mill floors to record air temperatures. The time required to reach 50 degrees C, time above 50 degrees C, and the maximum temperature among mill floors and in bioassay boxes were measured. The maximum temperature in bioassay boxes and in the mill was lower on the first floor than on other floors. This trend was apparent in time required to reach 50 degrees C and time above 50 degrees C, especially in compartments with 2-cm-deep flour. The mean +/- SE mortality of T. castaneum life stages on the first floor was 55.5 +/- 12.9-98.6 +/- 0.8%; it was 93.2 +/- 6.7-100 +/- 0.0% on other floors. Adults were the least susceptible stage. Mortality of T. castaneum stages in compartments with 2-cm-deep flour was generally lower than those with flour dust. Costs for the three heat treatments ranged from US$27,438 to $28,838. An effective heat treatment can be conducted within 24 h, provided temperatures on mill floors reach 50 degrees C in 8-12 h and are held above 50 degrees C for at least 10-14 h, with maximum temperatures held between 50 and 60 degrees C.     

Thermal death kinetics of red flour beetle (Coleoptera: Tenebrionidae)

While developing radio frequency heat treatments for dried fruits and nuts, we used a heating block system developed by Washington State University to identify the most heat-tolerant life stage of red flour beetle, Tribolium castaneum (Herbst), and to determine its thermal death kinetics. Using a heating rate of 15 degrees C/min to approximate the rapid heating of radio frequency treatments, the relative heat tolerance of red flour beetle stages was found to be older larvae > pupae and adults > eggs and younger larvae. Lethal exposure times for temperatures of 48, 50, and 52 degrees C for the most heat-tolerant larval stage were estimated using a 0.5th order kinetic model. Exposures needed for 95% mortality at 48 degrees C were too long to be practical (67 min), but increasing treatment temperatures to 50 and 52 degrees C resulted in more useful exposure times of 8 and 1.3 min, respectively. Red flour beetle was more sensitive to changes in treatment temperature than previously studied moth species, resulting in red flour beetle being the most heat-tolerant species at 48 degrees C, but navel orangeworm, Amyelois transitella (Walker), being most heat tolerant at 50 and 52 degrees C. Consequently, efficacious treatments for navel orangeworm at 50-52 degrees C also would control red flour beetle.     

Effects of a juvenoid, DPE-28, on biology and behaviour of Culex quinquefasciatus, the human filariasis vector

Studies on the effect of a juvenoid, DPE-28 (2,4-dinitrophenyl-2',6'-di-tertiarybutyl phenyl ether) on biology and behaviour of Cx. quinquefasciatus showed that the developmental duration, sex ratio, mating success and blood feeding were considerably affected by the exposure of larvae and pupae to the compound. Exposure of fourth instar larvae to 0.007 (EI90) and 0.0019 (EI50) ppm of DPE-28 prolonged the duration of pupation by 58.6 and 52.4 hr and delayed the adult emergence by 35.4 and 17.7 hr in males and 36.8 and 21.1 hr in females respectively. Exposure of freshly ecdysed pupae to 10 and 5 ppm delayed the adult emergence with respect to the control by 54.3 and 32.4 hr in males and 55.2 and 33.2 hr in females respectively. The sex ratio of the adults emerged from treated larvae and pupae was also affected. The female mosquitoes that survived from the exposed fourth instar larvae and pupae exhibited a low blood engorgement ratio. This depression in blood feeding was more pronounced in adults emerged from treated pupae than that of treated fourth instar larvae. A significant proportion of adults emerged from treated larvae and pupae were able to feed only partially. Mating success of the treated populations declined considerably when crosses were made between the males and females emerged from treated fourth instar larvae and pupae. The adults emerged from treated larvae and pupae showed a significant reduction in the oviposition.     

Lethal and sublethal effects of selected insecticides and an insect growth regulator on the boll weevil (Coleoptera: Curculionidae) ectoparasitoid Catolaccus grandis (Hymenoptera: Pteromalidae)

A laboratory culture of Catolaccus grandis (Burks), an ectoparasitoid of the boll weevil, Anthonomus grandis grandis Boheman, was exposed to lethal and sublethal doses of insecticides and an insect growth regulator using a spray chamber bioassay. Materials tested were azinphos-methyl, endosulfan, fipronil, malathion, cyfluthrin, dimethoate, spinosad, methyl parathion, acephate, oxamyl, and tebufenozide. At full rates, spinosad was significantly less toxic to female C. grandis than other treatments except endosulfan. Fipronil and malathion were significantly more toxic to females than other treatments. Most of the chemicals tested were highly toxic to male C. grandis; spinosad was least toxic. At reduced rates, most of 4 selected chemicals tested were low in toxicity to C. grandis; however, a reduced rate of malathion was significantly more toxic to females than other treatments. No C. grandis pupae developed from parasitism during a 24-h treatment period with malathion or spinosad. The sex ratio of progeny from sprayed adults appeared to be unaffected by the treatments.     

Bioactivities of the leaf essential oil of Curcuma longa (var. ch-66) on three species of stored-product beetles (Coleoptera)

Essential oil extracted from the leaves of turmeric, Curcuma longa L., was investigated for contact and fumigant toxicity and its effect on progeny production in three stored-product beetles, Rhyzopertha dominica F. (lesser grain borer), Sitophilus oryzae L. (rice weevil), and Tribolium castaneum Herbst (red flour beetle). Oviposition-deterrent and ovicidal actions of C. longa leaf oil were also evaluated against T. castaneum. The oil was insecticidal in both contact and fumigant toxicity assays. The adults of R. dominica were highly susceptible to contact action of C. longa leaf oil, with LD50 value of 36.71 microg/mg weight of insect, whereas in the fumigant assay, adults of S. oryzae were highly susceptible with LC50 value of 11.36 mg/liter air. Further, in T. castaneum, the C. longa oil reduced oviposition and egg hatching by 72 and 80%, respectively at the concentration of 5.2 mg/cm2. At the concentration of 40.5 mg/g food, the oil totally suppressed progeny production of all the three test insects. Nutritional indices indicate >81% antifeedant action of the oil against R. dominica, S. oryzae and T castaneum at the highest concentration tested.     

Radiation biology and inherited sterility of light brown apple moth (Lepidoptera: Tortricidae): developing a sterile insect release program

The radiation biology of two geographically isolated populations of the light brown apple moth [Epiphyas postvittana (Walker)] was studied in Australia and New Zealand as an initiation of a SIT/F1 sterility program. Pharate and < or = 2 d pre-emergence pupae were exposed to increasing radiation doses up to a maximum dose of 300 Gy. Fertility and other life history parameters were measured in emerging adults (parental) and their progeny (F1-F3 adults). Parental fecundity was significantly affected by increasing irradiation dose in pharate pupae only. For both populations, parental egg fertility declined with increasing radiation. This was most pronounced for the irradiated parental females whose fertility declined at a higher rate than of irradiated males. At 250 Gy, females < or = 2 d preemergence pupae produced few larvae and no adults at F1. No larvae hatched from 250 Gy-irradiated female pharate pupae. At 300 Gy, males still had residual fertility of 2-5.5%, with pharate pupae being the more radio-sensitive. Radiation-induced deleterious inherited effects in offspring from irradiated males were expressed as increased developmental time in F1 larvae, a reduction in percent F1 female survival, decreased adult emergence and increased cumulative mortality over subsequent generations. Males irradiated at > or = 150 Gy produced few but highly sterile offspring at F1 and mortality was > 99% by F2 egg.     

Stage- and sex-specific heat tolerance in the yellow dung fly Scathophaga stercoraria

Thermal tolerance varies at all hierarchical levels of biological organization: among species, populations, individuals, and even within individuals. Age- or developmental stage- and sex-specific thermal effects have received relatively little attention in the literature, despite being crucial for understanding thermal adaptation in nature and responses to global warming. We document stage- and sex- specific heat tolerance in the yellow dung fly Scathophaga stercoraria (Diptera: Scathophagidae), a species common throughout the northern hemisphere that generally favours cool climates. Exposure of eggs to temperatures up to 32 °C did not affect larval hatching rate, but subsequent egg-to-adult survival at a benign temperature was reduced. Permanent transfer from benign (18 °C) to hot temperatures (up to 31 °C) at different larval and pupal stages strongly decreased egg-to-adult survival, though survival continuously improved the later the transfer occurred. Temporary transfer for only two days increased mortality more weakly, survival being lowest when temperature stress was imposed early during the larval or pupal stages. Adult flies provided with sugar and water tolerated 31 °C longer than previously thought (5 days in males to 9 days in females). Eggs were thus less susceptible to thermal stress than larvae, pupae or adults, in agreement with the hypothesis that more mobile stages require less physiological protection against heat because they can behaviourally thermoregulate. The probability of mating, of laying a clutch, and hatching success were generally independently reduced by exposure of females or males to warm temperatures (24 °C) during the juvenile or adult stages, with some interactions evident. High temperature stress thus affects survival differentially depending on when it occurs during the juvenile or the pre-reproductive adult life stage, and affects reproductive success via the mating behaviour of both sexes, female physiology in terms of oviposition, and fertility via sperm and/or egg quality. Our results illustrate that temperature stress, even when moderate and temporary, during early development can have profound lethal and non-lethal fitness-consequences later in life.     

Cellular localization of HSP23 during Drosophila development and following subsequent heat shock

The low-molecular-weight heat-shock protein HSP23 is synthesized in the absence of heat shock during Drosophila development. Here, I present a quantitative analysis of this phenomenon and describe the cellular localization of this protein during normal development and after a subsequent heat shock. HSP23 is first detected in the late third instar larvae and continues to accumulate reaching a maximum level in late pupae. In a 1-week-old adult, HSP23 can no longer be detected. Following lysis of whole pupae, HSP23 is found in the soluble lysate fraction in a form which sediments between 10 and 20 S. Exposure of larvae, pupae, and the adult fly to heat stress (37 degrees C) results in an increased amount of HSP23 which, however, is recovered in an insoluble particulate form following insect lysis. During recovery from heat shock, HSP23 is again found in the soluble 10- to 20-S lysate fraction. In pupae which are exposed to a severe heat stress (41 degrees C) HSP23 remains in the pellet fraction after the heat stress and no pupae are able to emerge as adult flies. However, when pupae are first exposed to a mild heat-shock treatment prior to the 41 degrees C stress, the thermotolerance process is induced and HSP23 is again rapidly found in the soluble lysate fraction during the recovery from heat shock. These observations suggest a possible correlation between the survival of pupae after heat shock and the recovery of HSP23 in the soluble lysate fraction as 10- to 20-S structures after the heat shock.     

Efficacy of ozone fumigation against the major grain pests in stored wheat

Field experiments were conducted in steel bins containing 13,600 kg of hard red winter wheat, Triiticum aestivum L. One bin was treated with ozone and the second bin served as a control. Stored grain insects were placed in bins for 1-, 2-, 3-, and 4-d exposure periods in sampling tubes to test ozone concentrations of 0, 25, 50, and 70 parts per million by volume (ppmv). Ozone treatments on eggs and larvae of Plodia interpunctella (Hübner) were not effective, but pupae were more susceptible. Sitophilus oryzae (L.) adults were the most susceptible species with 100% mortality reached after 2 d in all ozone treatments. However, some progeny were produced at all concentrations and exposure periods. Tribolium castaneum (Herbst) adults had 100% mortality only after 4 d at 50 or 70 ppmv. No T. castaneum progeny were produced after 2-4 d at 70 ppmv. For Rhyzopertha dominica (F.), Cryptolestes ferrugineus (Stephens), and Oryzaephilus surinamensis (L.), 100% mortality was never achieved and progeny were produced at all ozone concentrations. Laboratory experiments, testing the effectiveness of ozone in controlling psocids, were conducted in two polyvinyl chloride cylinders each containing 55 kg of hard red winter wheat. Ozone treatment at a concentration of 70 ppmv was highly effective against adult female Liposcelis bostrychophila Badonnel and Liposcelis paeta Pearman after only 1 d of exposure. However, it was not effective against eggs of both species at all exposure periods. Ozonation has potential for the control of some stored grain insect pests on wheat.     

Effect of irradiation on Mexican leafroller (Lepidoptera: Tortricidae) development and reproduction

The effects of irradiation on egg, larval, and pupal development, and adult reproduction in Mexican leafroller, Amorbia emigratella Busck (Lepidoptera: Tortricidae), were examined. Eggs, neonates, early instars, late instars, early pupae, and late pupae were irradiated at target doses of 60, 90, 120, or 150 Gy, or they were left untreated as controls in replicated factorial experiments. Survival to the adult stage was recorded. Tolerance to radiation increased with increasing age and developmental stage. A radiation dose of 90 Gy applied to neonates and early instars prevented adult emergence. A dose of 150 Gy was not sufficient to prevent adult emergence in late instars or pupae. The effect of irradiation on sterility was examined in late pupae and adult moths. For progeny produced by insects treated as late pupae, a total of three out of 3,130 eggs hatched at 90 Gy, 0 out of 2,900 eggs hatched at 120 Gy, and 0 out of 1,700 eggs hatched at 150 Gy. From regression analysis, the dose predicted to prevent egg hatch from the progeny of irradiated late pupae was 120 Gy, with a 95% confidence interval of 101-149 Gy. The late pupa is the most radiotolerant stage likely to occur with exported commodities; therefore, a minimum absorbed radiation dose of 149 Gy (nominally 150 Gy) has potential as a quarantine treatment. Reciprocal crosses between irradiated and unirradiated moths demonstrated that males were more radiotolerant than females. Irradiation of female moths at a target dose of 90 Gy before pairing and mating with irradiated or unirradiated males resulted in no viable eggs, whereas irradiated males paired with unirradiated females produced viable eggs at 90 and 150 Gy.     

The biology of Diadromus collaris (Hymenoptera: Ichneumonidae), a pupal parasitoid of Plutella xylostella (Lepidoptera: Plutellidae), and its interactions with Oomyzus sokolowskii (Hymenoptera: Eulophidae)

The ichneumonid Diadromus collaris (Gravenhorst) has been recorded in many parts of the world as an important parasitoid of the diamondback moth, Plutella xylostella (Linnaeus), a serious pest of brassica vegetable crops worldwide. Some aspects of its biology and its interactions with Oomyzus sokolowskii (Kurdjumov), another major parasitoid of the same pest, were studied in the laboratory. At 25 degrees C, female wasps did not have mature eggs in their ovaries until about 12 h after emergence. Both males and females mated successfully 24-48 h after emergence, and females started to oviposit one to two days after emergence. Unmated females produced male progeny only; mated females produced progeny of both sexes. The development rate of the parasitoid increased linearly with temperature from 15 to 30 degrees C, with an estimated low temperature threshold of 7.4 degrees C and a thermal constant of 225.1 day-degrees for development from egg to adulthood. Rates of survival from larva to adulthood were about 90% between 20 and 28 degrees C and decreased as temperature decreased or increased. No immatures survived to adulthood at 35 degrees C. When provided with honey solution, the females lived on average 8.3, 11.5 and 7.0 days, and parasitized 26, 44 and 46 host pupae at 20, 25 and 30 degrees C, respectively. Female wasps could be stored at 15 degrees C for up to four weeks without detrimental effects on reproduction. Females of D. collaris attacked host pupae already parasitized by O. sokolowskii, inserting their ovipositor into the hosts at a similar frequency as into unparasitized host pupae, but they did not lay eggs inside the hosts.     

Effect of heat stress on survival and reproduction of the olive fruit fly Bactocera (Dacus) oleae

The olive fruit fly Bactrocera (Dacus) oleae Gmelin is a major olive pest in Greece and other Mediterranean countries. Its population density and respective olive infestation is usually low in many areas of northern Greece during summer months. To some extent, this may be due to the prevailing high temperature and low relative humidity conditions. In the present work the effects of short term exposure to high temperatures on the survival and egg production of B. oleae pre‐imaginal stages and adults were studied under laboratory conditions. Different larval instars within infested green olive fruits, adults and pupae and were exposed for 2 h to a series of different high constant temperatures ranging from 34 to 42°C. Subsequently, survival percentages of pre‐imaginal stages and adults as well as the number of eggs laid by females previously exposed to high temperatures were determined. At temperatures up to 38°C high survival percentages of larvae and adults were observed, whereas pupae displayed a relatively increased heat tolerance up to 40°C. Female longevity and egg production were substantially reduced after heat stress. Prior acclimation at 33°C for 1 and 3 days resulted in increased adult survival following heat stress. We discuss the results with respect to the ability of the fly to survive and reproduce under high summer temperatures.     

Efficacy of heat treatment for disinfestation of concrete grain silos

Field experiments were conducted in 2007 and 2008 to evaluate heat treatment for disinfestations of empty concrete elevator silos. A Mobile Heat Treatment Unit was used to introduce heat into silos to attain target conditions of 50 degrees C for at least 6 h. Ventilated plastic containers with a capacity of 100 g of wheat, Triticum aestivum L., held Rhyzopertha dominica (F.) (Coleoptera: Bostrichidae) and Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae). Polyvinyl chloride containers with a capacity of 300 g of wheat held adults of Liposcelis corrodens (Heymons) (Psocoptera: Liposcelididae) and Liposcelis decolor (Pearman), which were contained in 35-mm Petri dishes within the grain. Containers were fastened to a rope suspended from the top of the silo at depths of 0 m (just under the top manhole), 10 m, 20 m, and 30 m (silo floor). When the highest temperature achieved was approximately 50 degrees C for 6 h, parental mortality ofR. dominica and T. castaneum, and both psocid species was 98-100%. Progeny production of R. dominica occurred when there was parental survival, but in general R. dominica seemed less impacted by the heat treatment than T. castaneum. There was 100% mortality of L. corrodens at all depths in the heat treatments but only 92.5% mortality for L. decolor, with most survivors located in the bioassay containers at the top of the silo. Results show wheat kernels may have an insulating effect and heat treatment might be more effective when used in conjunction with sanitation and cleaning procedures.