Optically active thermosensitive amphiphilic polymer brushes based on helical polyacetylene: preparation through “click” onto grafting method and self-assembly

Optically active, thermosensitive, and amphiphilic polymer brushes, which consist of helical poly(N-propargylamide) main chains and thermosensitive poly(N-isopropylacrylamide) (PNIPAm) side chains, were prepared via a novel methodology combining catalytic polymerization, atom transfer radical polymerization (ATRP), and click chemistry. Helical poly(N-propargylamide) bearing α-bromoisobutyryl pendent groups was synthesized via catalytic polymerization, followed by substituting the –Br moieties with azido groups. Then, alkynyl terminated PNIPAm formed via ATRP was successfully grafted onto the azido functionalized helical polymer backbones via click chemistry, providing the expected polymer brushes. GPC, FT-IR, and ¹H-NMR measurements indicated the successful synthesis of the novel amphiphilic polymer brushes. UV–vis and CD spectra evidently demonstrated the helical structures of the polymer backbones and the considerable optical activity of the final brushes. The polymer brushes self-assembled in aqueous solution forming core/shell structured nanoparticles, which were comprised of optically active cores (helical polyacetylenes) and thermosensitive shells (PNIPAm).     

N-[Salicylidene-1,2-ethanediaminoethyl]-2-bromoisobutyramide as initiator for atom transfer radical polymerization and surface-initiated ATRP of methyl methacrylate on copper

N-[Salicylidene-1,2-ethanediaminoethyl]-2-bromoisobutyramide (SEB) was synthesized and characterized by elemental analysis, FT-IR and ¹H NMR. It had been successfully used as a bidentate initiator for the atom transfer radical polymerization (ATRP) of methyl methacrylate with CuBr/2,2′-bipyridine as the catalyst and N,N-dimethylformamide as the solvent at 70 °C. The kinetics was first order in monomer and the number-average molecular weight of the polymer increased linearly with monomer conversion, indicating the ‘living’/controlled nature of the polymerization. The polymerization reached high conversions producing polymers with a low molecular weight distribution (M _w/M _n = 1.34). The obtained poly(methylmethacrylate) (PMMA) functionalized with salicylidene-1,2-ethanediaminoethyl and ω-Br as the end groups were characterized by FT-IR spectroscopy. They can be used as macroinitiators for chain-extension reaction. Then, PMMA coatings were grafted from copper substrates by surface-initiated ATRP from a surface-bound SEB initiator. The electrochemical impedance spectroscopy measurements and potentiodynamic electrochemical experiments confirmed the successful grafting of the polymer coatings. Greatly improved short-term anticorrosive properties for PMMA modified electrodes were demonstrated by substantially increased resistance of the film for a period of 24 h as compared to bare copper.     

N-[2-(8-heptadecenyl)-4,5-dihydro-1H-imidazole-1-ethyl]-2-bromoisobutyramide as initiator for atom transfer radical polymerization (ATRP) and surface-initiated ATRP of methyl methacrylate on iron

N-[2-(8-heptadecenyl)-4,5-dihydro-1H-imidazole-1-ethyl]-2-bromoisobutyramide (IEB) was synthesized and characterized by elemental analysis, FT-IR, and ¹H NMR. It had been successfully used as a bidentate initiator for the ATRP of methyl methacrylate with CuBr/2,2′-bipyridine as the catalyst, and N,N-dimethylformamide as the solvent at 70 °C. The kinetics was first order in monomer and the number-average molecular weight of the polymer increased linearly with the monomer conversion, indicating the ‘living’/controlled nature of the polymerization. The polymerization reached high conversions producing polymers with a low molecular weight distribution ( M _w/M _n = 1.319). The obtained poly(methylmethacrylate) (PMMA) functionalized with 2-(8-heptadecenyl)-4,5-dihydro-1H-imidazoleyl and ω-Br as the end groups were characterized by FT-IR spectroscopy. They can be used as macroinitiators for chain extension reaction. Then, PMMA coatings were grafted from iron substrates by surface-initiated ATRP from a surface-bound IEB initiator. The EIS measurements confirmed the successful grafting of the polymer coatings. Greatly improved short-term anticorrosive properties for PMMA-modified electrodes were demonstrated by substantially increased resistance of the film for a period of 24 h as compared to bare iron.     

Synthesis and characterization of well-defined hydrophilic block copolymer brushes by aqueous ATRP

Homopolymer brushes of poly(N,N-dimethylacrylamide) (PDMA), poly(methoxyethylacrylamide) (PMEA) and poly(N-isopropylacrylamide)(PNIPAM) grown on atom transfer radical polymerization (ATRP) initiator functionalized latex particles were used as macroinitiators for the synthesis of PDMA-b-PNIPAM/PMEA, PMEA-b-PDMA/PNIPAM and PNIPAM-b-PDMA block copolymer brushes by surface initiated aqueous ATRP. The grafted homopolymer and block copolymer brushes were analyzed for molecular weight, molecular weight distribution, chain grafting density, composition and hydrodynamic thickness (HT) using gel permeation chromatography-multi-angle laser light scattering, ¹H NMR, particle size analysis and atomic force microscopy (AFM) techniques. The measured graft molecular weight increased following the second ATRP reaction in all cases, indicating the second block had been added. Chain growth depended on the nature of the monomer used for block copolymerization and its concentration. Unimodal distribution of polymer chains in GPC with non-overlap of molar mass-elution volume curves implied an efficient block copolymerization. This was supported by the increase in HT measured by particle size analysis, equilibrium thickness observed by AFM and the composition of the block copolymer layer by ¹H NMR analysis, both in situ and on cleaved chains in solution. ¹H NMR analysis of the grafted latex and cleaved polymers from the surface demonstrated that accurate determination of the copolymer composition by this method is possible without detaching polymer chains from surface. Block copolymer brushes obey the same power law dependence of HT on molecular weight as homopolymer brushes in good solvent conditions. The NIPAM-containing block copolymer brushes were sensitive to changes in the environment as shown by a decrease in HT with increase in the temperature of the medium.     

Amphiphilic cylindrical brushes with poly(acrylic acid) core and poly(n-butyl acrylate) shell and narrow length distribution

Core-shell cylindrical polymer brushes with poly(t-butyl acrylate)-b-poly(n-butyl acrylate) (PtBA-b-PnBA) diblock copolymer side chains were synthesized via ‘grafting from’ technique using atom transfer radical polymerization (ATRP). The formation of well-defined brushes was confirmed by GPC and ¹H NMR. Multi-angle light scattering (MALS) measurements on brushes with 240 arms show that the radius of gyration scales with the degree of polymerization of the side chains with an exponent of 0.57±0.05. The hydrolysis of the PtBA block of the side chains resulted amphiphilic cylindrical core-shell nanoparticles. In order to obtain a narrow length distribution of the brushes, the backbone, poly(2-hydroxyethyl methacrylate), was synthesized by anionic polymerization in addition to ATRP. The characteristic core-shell cylindrical structure of the brush was directly visualized on mica by scanning force microscopy (SFM). Brushes with 1500 block copolymer side chains and a length distribution of l_w/l_n=1.04 at a total length l_n=179 nm were obtained. By choosing the proper solvent in the dip-coating process on mica, the core and the shell can be visualized independently by SFM.     

Covalently tethered comb‐like polymer brushes on hydrogen‐terminated Si (100) surface via consecutive aqueous atom transfer radical polymerization of methacrylates

The hydrogen‐terminated Si (100) (Si? H surface) was functionalized by coupling with 4‐vinylbenzyl chloride (VBC) to form a Si? VBC surface, which serves as macroinitiators for the surface‐initiated aqueous atom transfer radical polymerization (ATRP) of 2‐hydroxyethyl methacrylate (HEMA) and poly(ethylene glycol)methacrylate (PEGMA) to prepare Si? VBC? g? PHEMA and Si? VBC? g? PPEGMA substrates, respectively. The ellipsometric results revealed that the surface‐initiated ATRP of both PHEMA and PPEGMA brushes proceeded in a controlled fashion. By adjusting the monomer concentration, an eccentric polymer thickness dependence on the initial monomer concentration [M]₀ was observed for both HEMA and PEGMA, i.e., in the dilute regime, the thickness of the polymer film increases with the increase in [M]₀; however, beyond critical [M]₀, the thickness deceases gradually with the further increase. Such an eccentricity was tentatively correlated to the counteractive combination of the increase in [M]₀ and decrease in the apparent polymerization rate constant. Both Si? VBC? g? PHEMA and Si? VBC? g? PPEGMA substrates were esterified for the subsequent surface‐initiated ATRP, resulting in corresponding comb‐like brushes. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 2590–2599, 2006     

Thermoresponsive graphene nanosheets by functionalization with polymer brushes

We report the preparation of thermoresponsive graphene nanosheets functionalized by the polymer brushes. This approach involves the direct growth of thermoresponsive polymer brushes from functional graphene sheets (FGSs) by chemical modification with initiators followed by extension with poly(2-(dimethylamino)ethyl methacrylate) (PDMAEMA) through surface-initiated atom transfer radical polymerization. The highly controllable polymerization method affords the hybrid FGS-PDMAEMA with tailorable length of PDMAEMA brushes possessing the average molecular weight (M_n) ranging from 7.4 × 10³ to 6.0 × 10⁴ with low molecular weight distributions (M_w/M_n = 1.09–1.22). The resulting FGS-PDMAEMA was carefully characterized with a number of techniques, including elemental analysis, thermogravimetric analysis, differential scanning calorimetry, X-ray photoelectron spectroscopy, scanning electron microscopy, and transmission electron microscopy, all supporting the successful integration of polymer brushes onto the surface of FGS. Most importantly, we accomplished the reversible phase transfer of this hybrid FGS-PDMAEMA between aqueous and organic phases via temperature control by taking advantage of the thermoresponsive nature of PDMAEMA brushes. Moreover, the composite film prepared by depositing the suspensions of FGS-PDMAEMA demonstrated the facile control over the wettability upon temperature changes. This tailored control over dispersion in water, selective solubilization between aqueous and organic solvents, and wettability control upon temperature variation have a significant impact on the ability to improve properties of hybrid graphene-based materials. Because of the highly versatile and tunable properties of surface-initiated atom transfer polymerization, we anticipate that the general concept presented here offers a unique potential platform for integrating responsive polymers for graphene nanosheets for advanced electronic, energy, and sensor applications.     

Amine functionalization of poly(styryl)lithium with N-(benzylidene)trimethylsilylamine

Functionalization reactions of poly(styryl)lithium with N-(benzylidene)-trimethylsilylamine produce polymers containing significant amounts of coupling products for M_n = 2.8 × 10³g/mol (19% coupling) and M_n = 15 × 10³g/mol (15% coupling). Isolation and characterization of the products for the amination of poly(styryl)lithium with M_n = 2.8 × 1³g/mol indicates that the non-coupled products consist of a primary amine-terminated polymer (69% yield) and an acetophenone-type functionalized polymer (12% yield). The dimeric product (19% yield) has a primary amine functional group. The formation of these products is rationalized by a Cannizzaro-type reaction of the initially formed polymeric lithium silylamide product with excess N-(benzylidene)(trimethylsilylamine to form the corresponding polymer with imine chain-end functionality which can react with another molecule of poly(styryl)lithium to form dimer product or hydrolyze to the acetophenone functionality on work-up.     

Photomediated atom transfer radical polymerization of MMA under long-wavelength light irradiation

In this study, a novel photocatalyst, pentarylenebis(dicarboximide) dye: (1,6,13,18-tetra(4-(2,3,3-trimethylbut-2-yl)phenoxy)-N,N’-(2,6-diisopropylphenyl)-pentarylene-3,4,15,16-tetracarboxidiimide) (TTPDPT), was first used in metal-free photoinduced atom transfer radical polymerization (ATRP) of methyl methacrylates (MMA). The initiator was methyl α-bromoisobutyrate (MBI) and the light source was mild near-infrared (NIR) light irradiation (λ_max?≈?870 nm). The TTPDPT-mediated ATRP relies on in situ photoreduction of a MBI through an electron transfer process to generate the desired alkyl radical, which could induce polymerization of the monomer. The photoinduced metal-free ATRP of MMA shows typical characteristics of controlled free radical polymerization, showing the linear evolution of number-average molecular weight (M_n,GPC) with monomer conversion, where polymers with predetermined degree of polymerization have well-controlled molecular weights and narrow molecular weight distribution (M_w/M_n). The photoinduced metal-free ATRP of MMA can be carried out with just ppm level of TTPDPT. The polymerization initiation and propagation can be operated by the aid of pulsed light sequences while NIR light source was used to promote carbon–carbon bond formation and to produce poly(methyl methacrylate) (PMMA) with M_w/M_n as low as 1.5. The synthesized PMMA was characterized by ¹H nuclear magnetic resonance (¹H NMR). The resultant PMMA contained a bromide end group that can be employed to reinitiate styrene polymerization to produce block copolymers through chain extension experiments.     

Synthesis of well-defined norbornene–lactone-functionalized polymers via ATRP

Well-defined norbornene–lactone-functionalized polymers were synthesized by atom transfer radical polymerization (ATRP) of 5-methacryloxy-6-hydroxynorbornene-2-carboxylic-6-lactone (MNL) and 5-acryloxy-6-hydroxynorbornene-2-carboxylic-6-lactone (ANL) monomers. The ATRP of MNL initiated by ethyl 2-bromopropionate (EBrP), in both N,N-dimethylformamide (DMF) and o-dichlorobenzene (ODCB) solvents was successfully carried out in the presence of CuCl/CuBr and N,N,N′′,N′′,N′′-pentamethyltriethylenetetramine (PMDETA) at 70 °C. The CuCl/ODCB catalyst system gave rise to a lower M _w/M _n (≦1.20) than CuBr/DMF catalyst system. The ATRP of ANL was feasible in the presence of CuBr and PMDETA at 70 °C but showed lower reactivity than MNL. The resulting polymers were characterized by means of gel permeation chromatography (GPC) and ¹H NMR spectroscopy.     

Grafted polytriphenylamines synthesized by atom transfer radical polymerization in tandem with oxidative polycondensation

Arylamine polymers are among the most studied conducting polymers due to a whole range of interesting properties and applications. In this paper, we describe the synthesis of soluble and processable electroactive poly(triphenylamine-g-oligostyrene) by two polymerization methods in tandem. In the first step, oligostyrene macromonomers with well-defined molecular weight, polydispersity and chain-end functionality were obtained by radical-controlled polymerization (i.e., atom transfer radical polymerization, ATRP) of styrene. The styrene oligomerization was carried out using a new triphenylamine-based initiator, [4-(diphenylamino)benzyl 2-bromo-2-methylpropanoate], cuprous bromide as co-initiator and bipyridine as ligand, at 100 °C, in bulk. Using two feed molar ratios of components: [styrene]₀:[initiator]₀:[CuBr]₀:[bipyridine]₀, two macromonomers with M _n = 9,900; M _w/M _n = 1.25 and M _n = 3,460; M _w/M _n = 1.22, respectively, were synthesized. The presence of triphenylamine moiety at one end of the macromonomer allowed the chemical and electrochemical polymerization of macromonomers to polytriphenylamine brushes having short oligostyrene grafts in every structural unit. The oligostyrene substituents confer processability and good solubility in common organic solvent characteristics for polystyrene while preserving the optoelectronic properties of arylamine-conjugated main chain. The chemical oxidative polymerization of macromonomer was carried out using iron (III) chloride dissolved in nitrobenzene. The redox behavior of the initiator, macromonomer and graft polymer was investigated by cyclic voltammetry. In all cases, it was observed that the reversible oxido-reduction of arylamine sites was accompanied by irreversible oxidative electropolymerization by free-para positions of triphenylamine substituents and deposition of thin films on working electrode. The structures of the initiator, macromonomers and graft copolymers were determined by Fourier transform infrared, ¹H and ¹³C NMR spectroscopy. The absorption and fluorescence spectroscopy have revealed absorption and emission maxima characteristics for triphenylamine group. DSC studies have confirmed glass transitions characteristics for styrene oligomers.     

‘Living’ radical polymerization of styrene with AIBN/FeCl3/PPh3 initiating system via a reverse atom transfer radical polymerization process

Well‐defined polystyrenes with an α‐C(CH₃)₂(CN) and an ω‐chlorine atom end‐groups, and narrow polydispersity (M_n = 3000–4000 g mol⁻¹, M_w/M_n = 1.3–1.4) have been synthesized by a radical polymerization process using 2,2′‐azobisisobutyronitrile(AIBN)/FeCl₃/PPh₃ initiation system. When the ratio of [St]₀:[AIBN]₀:[FeCl₃]₀:[PPh₃]₀ is 200:1:4:12 at 110 °C, the radical polymerization is ‘living’, but the molecular weight of the polymers is not well‐controlled. The polymerization mechanism belongs to a reverse atom transfer radical polymerization (ATRP). Because the polymer obtained is end‐functionalized by a chlorine atom, it can then be used as a macroinitiator to perform a chain extension polymerization in the presence of CuCl/2,2′‐bipyridine catalyst system via a conventional ATRP process. The presence of a chlorine atom as an end‐group was determined by ¹H NMR spectroscopy. © 2000 Society of Chemical Industry     

Kinetic study of the atom transfer radical polymerization of n‐docosyl acrylate

The atom transfer radical polymerization (ATRP) of n‐docosyl acrylate (DA) was studied at 80°C in N,N‐dimethylformamide using the carbon tetrabromide/FeCl₃/2,2′‐bipyridine (bpy) initiator system in the presence of 2,2′‐azobisisobutyronitrile (AIBN) as the source of reducing agent. The rate of polymerization exhibits first‐order kinetics with respect to the monomer. The linear relationship between the molecular weight of the resulting poly(n‐docosyl acrylate) with conversion and the narrow polydispersity of the polymers indicates the living characteristics of the polymerization reaction. The significant effect of AIBN on the ATRP of DA was studied keeping [FeCl₃]/[bpy] constant. A probable reaction mechanism for the polymerization system is postulated to explain the observed results. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 2147–2154, 2005     

Activators regenerated by electron transfer in ATRP of methyl methacrylate with alcohol as reducing agent in the presence of a base

Poly(methyl methacrylate) (PMMA) was synthesized via activators regenerated by electron transfer (ARGET) in atom transfer radical polymerization (ATRP) (ARGET ATRP) of methyl methacrylate in N,N-dimethylformamide and using ethyl 2-bromoisobutyrate as initiator, CuCl₂ as catalyst, N,N,N′,N′-tetramethylethylene-diamine as ligand and ethanol as a reducing agent. The polymerization temperature was kept at 70 °C. A well-defined PMMA with predetermined molecular weight and narrow molecular weight distribution was obtained. A linear relationship between ln([M]₀/[M]) and polymerization time was found to show the living and controllable radical polymerization. The molecular weights of the obtained polymers increased linearly with monomer conversion and the data are in good agreement with the theoretical values with narrow molecular weight distribution (M _w/M _n). That is to say, alcohols were found to be a kind of highly efficient agents in the presence of Na₂CO₃ in this system. The effects of temperature, different types of alcohols and the amount of n-propanol on the polymerization were investigated. With increasing temperature (changed from 70 to 90 °C) and the amount of n-propanol (changed from 500:1:1:2:1:2 to 500:1:1:2:10:2), the conversion increased from 15.6 to 34.7 % and from 8.6 to 26.8 %, respectively. However, the value of M _w/M _n became broader when the molar ratio of [MMA]₀/[EBiB]₀/[CuCl₂]₀/[TMEDA]₀/[n-propanol]₀/[Na₂CO₃]₀ was 500:1:1:2:1:2, indicating that the amount of n-propanol played an important role in ARGET ATRP of MMA. The activation energy was calculated to be 51.96 kJ/mol. The different types of alcohol were demonstrated to be an efficient reducing agent in this system except for tert-butyl alcohol. The “living” feature of the obtained polymer was further verified by a chain extension experiment. The obtained polymer was characterized by ¹H NMR and GPC.     

Synthesis of binary mixed homopolymer brushes by combining atom transfer radical polymerization and nitroxide-mediated radical polymerization

This communication describes a novel strategy to synthesize binary mixed homopolymer brushes from mixed self-assembled monolayers (SAMs) on silica substrates by combining atom transfer radical polymerization (ATRP) and nitroxide-mediated radical polymerization (NMRP). Mixed SAMs terminated by ATRP and NMRP initiators were prepared by coadsorption of two corresponding organotrichlorosilanes from toluene solutions. Mixed poly(methyl methacrylate) (PMMA)/polystyrene (PS) brushes were synthesized by ATRP of MMA at 80 °C followed by NMRP of styrene at 115 °C. Corresponding ‘free’ initiators were added into the solutions to control the polymerizations. We have found that the brush thickness increases with molecular weight in a nearly linear fashion. For a series of binary brushes consisting of PMMA of molecular weight of 26,200 and PS of various molecular weights, we have observed a transition in water contact angles with increasing PS molecular weight after CH₂Cl₂ treatment. Moreover, binary mixed polymer brushes with comparable molecular weights for two grafted polymers undergo reorganization in response to environmental changes, exhibiting different wettabilities.     

Surface functionalization of nanodiamond particles via atom transfer radical polymerization

Ultradispersed diamond (UDD)/polymer brushes having excellent solution dispersibilities are prepared by atom transfer radical polymerization (ATRP) using the “grafting-from” synthesis strategy. ATRP initiators, covalently attached to oxidized surface carbon atoms of UDD aggregates using esterification chemistry, initiate polymerization of methacrylate monomers to form hydrophobic UDD/poly(iso-butyl methacrylate) and UDD/poly(tert-butyl methacrylate) polymer brushes. Acid hydrolysis of a UDD/poly(tert-butyl methacrylate) polymer brush affords a hydrophilic UDD/poly(methacrylic acid) polymer brush. Based on surface area measurements and GPC data, the calculated surface density of a representative UDD/polymer brush material is ca. five polymer chains/100 nm². A wide variety of UDD/polymer brush materials having controlled dispersibility and functional group reactivity are now potentially available using this synthesis strategy.     

Iron(III)-mediated ATRP systems of n-docosyl acrylate with AIBN and BPO

Well-defined poly(n-docosyl acrylate) (PDA) with narrow molecular weight distribution has been synthesized by atom transfer radical polymerization (ATRP) and reverse ATRP of n-docosyl acrylate (DA) at 80 °C in N,N-dimethylformamide using the carbon tetrabromide/FeCl₃/2,2′-bipyridine (bpy) initiation system in the presence of 2,2′-azobisisobutyronitrile (AIBN) and benzoyl peroxide (BPO) as the source of reducing agent. The rates of polymerization for both the systems exhibit first-order kinetics with respect to the monomer, however, peroxide-initiated system shows slow rate of polymerization as compared to the azo-system. The effect of various reaction parameters on number average molecular weight (M _n ) and molecular weight distribution (M _w/M _n ) have been investigated. The resulting PDA that obtained in presence of AIBN and BPO systems has been compared for both the conventional and reverse ATRP. The reverse ATRP initiated by peroxides behaves differently than that of the azo initiators. In reverse ATRP with BPO, the rate of polymerization (R _p) has been significantly increased with the increase of BPO resulting higher M _n and broader M _w/M _n . The reverse ATRP of DA did not exhibit living characteristics with BPO system. PDA has been characterized by GPC, FTIR, and NMR spectroscopy.     

Photo‐Induced atom transfer radical polymerization with nanosized α‐Fe2O3 as photoinitiator

Photo‐induced atom transfer radical polymerization (ATRP) of methyl methacrylate (MMA) was achieved in poly(ethylene glycol)‐400 with nanosized α‐Fe₂O₃ as photoinitiator. Well‐defined poly(methyl methacrylate) (PMMA) was synthesized in conjunction with ethyl 2‐bromoisobutyrate (EBiB) as ATRP initiator and FeCl₃·6H₂O/Triphenylphosphine (PPh₃) as complex catalyst. The photo‐induced polymerization of MMA proceeded in a controlled/living fashion. The polymerization followed first‐order kinetics. The obtained PMMA had moderately controlled number‐average molecular weights in accordance with the theoretical number‐average molecular weights, as well as narrow molecular weight distributions (M_w/M_n). In addition, the polymerization could be well controlled by periodic light‐on–off processes. The resulting PMMA was characterized by ¹H nuclear magnetic resonance and gel permeation chromatography. The brominated PMMA was used further as macroinitiator in the chain‐extension with MMA to verify the living nature of photo‐induced ATRP of MMA. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42389.     

Polymers with Esters of Phosphoric Acid Units: From Synthesis,Models of Biopolymers to Polymer?Inorganic Hybrids

Syntheses, some properties, and applications of the poly(alkylene phosphate)s prepared either by ring-opening polymerization (ROP) or by polycondensation are described mostly on the basis of the data from our laboratories. The ROP of some cyclic phosphates and H-phosphonates are living and/or controlled process. Transesterification of the products of the reaction of an excess of dimethylphosphonate with glycols leads to polymers with M_n close to 5×10⁴. Poly(alkylene phosphate)s with five or six atoms in repeating units bear resemblance to the main chains of nucleic and teichoic acids. These and similar poly(alkylene phosphate)s with different repeating units were used as liquid membranes for the efficient separation of cations as well as to modify the medium for CaCO₃ crystallization. In this latter process, a diblock copolymer with ionic and nonionic block was used. Poly(alkylene phosphate)s constituted the ionic block and the nonionic block was formed from poly(ethylene glycol); together with CaCO₃ polymer inorganic hybrids were formed.