Multiaxial notch fatigue life prediction based on pseudo stress correction and finite element analysis under variable amplitude loading

A new computational methodology is proposed for fatigue life prediction of notched components subjected to variable amplitude multiaxial loading. In the proposed methodology, an estimation method of non‐proportionality factor (F) proposed by authors in the case of constant amplitude multiaxial loading is extended and applied to variable amplitude multiaxial loading by using Wang‐Brown's reversal counting approach. The pseudo stress correction method integrated with linear elastic finite element analysis is utilized to calculate the local elastic‐plastic stress and strain responses at the notch root. For whole local strain history, the plane with weight‐averaged maximum shear strain range is defined as the critical plane in this study. Based on the defined critical plane, a multiaxial fatigue damage model combined with Miner's linear cumulative damage law is used to predict fatigue life. The experimentally obtained fatigue data for 7050‐T7451 aluminium alloy notched shaft specimens under constant and variable amplitude multiaxial loadings are used to verify the proposed methodology and equivalent strain‐based methodology. The results show that the proposed methodology is superior to equivalent strain‐based methodology.     

Multiaxial fatigue and life prediction of elastomeric components

Elastomeric components have wide usage in many industries. The typical service loading for most of these components is variable amplitude and multiaxial. In this study a general methodology for life prediction of elastomeric components under these typical loading conditions was developed and illustrated for a passenger vehicle cradle mount. Crack initiation life prediction was performed using different damage criteria. The methodology was validated with component testing under different loading conditions including constant and variable amplitude in-phase and out-of-phase axial–torsion experiments. The optimum method for crack initiation life prediction for complex multiaxial variable amplitude loading was found to be a critical plane approach based on maximum normal strain plane and damage quantification by cracking energy density on that plane. Rainflow cycle counting method and Miner’s linear damage rule were used for predicting fatigue life under variable amplitude loadings. The fracture mechanics approach was used for total fatigue life prediction of the component based on specimen crack growth data and FE simulation results. Total fatigue life prediction results showed good agreement with experiments for all of the loading conditions considered.     

A weight function-critical plane approach for low-cycle fatigue under variable amplitude multiaxial loading

Low‐cycle fatigue data of type 304 stainless steel obtained under axial‐torsional loading of variable amplitudes are analyzed using four multiaxial fatigue parameters: SWT, KBM, FS and LKN. Rainflow cycle counting and Morrow's plastic work interaction rule are used to calculate fatigue damage. The performance of a fatigue model is dependent on the fatigue parameter, the critical plane and the damage accumulation rule employed in the model. The conservatism and non‐conservatism of predicted lives are examined for some combinations of these variables. A new critical plane called the weight function‐critical plane is introduced for variable amplitude loading. This approach is found to improve the KBM‐based life predictions.     

Multiaxial fatigue life prediction method based on path‐dependent cycle counting under tension/torsion random loading

A path‐dependent cycle counting method is proposed by applying the distance formula between two points on the tension‐shear equivalent strain plane for the identified half‐cycles first. The Shang–Wang multiaxial fatigue damage model for an identified half‐cycle and Miner's linear accumulation damage rule are used to calculate cumulative fatigue damage. Therefore, a multiaxial fatigue life prediction procedure is presented to predict conveniently fatigue life under a given tension and torsion random loading time history. The proposed method is evaluated by experimental data from tests on cylindrical thin‐walled tubes specimens of En15R steel subjected to combined tension/torsion random loading, and the prediction results of the proposed method are compared with those of the Wang–Brown method. The results showed that both methods provided satisfactory prediction.     

Multiaxial fatigue damage parameter and life prediction for medium-carbon steel based on the critical plane approach

The tension–torsion fatigue characteristics were investigated under proportional and non-proportional loading in this paper. The fatigue cracks on the surface of multiaxial fatigue specimens were observed and analyzed by a scan electron microscope. On the basis of the investigation on the Kindil–Brown–Miller and Fatemi–Socie’s critical plane approaches, a shear strain based multiaxial fatigue damage parameter was proposed by von Mises criterion based on combining the maximum shear strain and the normal strain excursion between adjacent turning points of the maximum shear strain on the critical plane. The proposed multiaxial fatigue damage parameter does not include the weight constants. According to the proposed multiaxial fatigue damage parameter, the multiaxial fatigue life prediction model was established with the Coffin–Manson equation, which is used to predict the multiaxial fatigue life of medium-carbon steel. The results showed that the proposed multiaxial fatigue damage parameter could be used under either multiaxial proportional or non-proportional loading.     

Prediction methods of fatigue critical point for notched components under multiaxial fatigue loading

Two methods based on local stress responses are proposed to locate fatigue critical point of metallic notched components under non‐proportional loading. The points on the notch edge maintain a state of uniaxial stress even when the far‐field fatigue loading is multiaxial. The point bearing the maximum stress amplitude is recognized as fatigue critical point under the condition of non‐mean stress; otherwise, the Goodman's empirical formula is adopted to amend mean stress effect prior to the determination of fatigue critical point. Furthermore, the uniaxial stress state can be treated as a special multiaxial stress state. The Susmel's fatigue damage parameter is employed to evaluate the fatigue damage of these points on the notch edge. Multiaxial fatigue tests on thin‐walled round tube notched specimens made of GH4169 nickel‐base alloy and 2297 aluminium‐lithium alloy are carried out to verify the two methods. The prediction results show that both the stress amplitude method and the Susmel's parameter method can accurately locate the fatigue critical point of metallic notched components under multiaxial fatigue loading.     

A notch critical plane approach of multiaxial fatigue life prediction for metallic notched specimens

An approach based on the local stress response is proposed to locate the fatigue critical point for metallic blunt notched specimens under multiaxial fatigue loading. According to the stress analysis, both stress gradient and gradient of loading nonproportionality exist at notch root. The plane in the vicinity of the notch that passes through the fatigue critical point and experiences the maximum shear stress amplitude is defined as the critical plane for notch specimens (CPN). Furthermore, the Susmel's fatigue damage parameter is modified to assess fatigue life of notched components by combining CPN and the theory of critical distance (TCD). The multiaxial fatigue test of the thin‐walled round tube specimens made of Ni‐base alloy GH4169 is carried out to verify the above approaches. In addition, test data of two kinds of materials are collected. The results show that the maximum absolute error of the fatigue critical point is 9.6° and the majority of the predicted life falls within the three‐time scatter band.     

Multiaxial low‐cycle fatigue life evaluation under different non‐proportional loading paths

This paper presents analytical and experimental investigations for fatigue lives of structures under uniaxial, torsional, multiaxial proportional, and non‐proportional loading conditions. It is known that the rotation of principal stress/strain axes and material additional hardening due to non‐proportionality of cycle loading are the 2 main causes resulting in shorter fatigue lives compared with those under proportional loading. This paper treats these 2 causes as independent factors influencing multiaxial fatigue damage and proposes a new non‐proportional influencing parameter to consider their combined effects on the fatigue lives of structures. A critical plane model for multiaxial fatigue lives prediction is also proposed by using the proposed non‐proportional influencing factor to modify the Fatemi‐Socie model. The comparison between experiment results and theoretical evaluation shows that the proposed model can effectively predict the fatigue life due to multiaxial non‐proportional loading.     

A novel accumulative fatigue damage model for multiaxial step spectrum considering the variations of loading amplitude and loading path

In this paper, based on the process of the fatigue crack initiation and the critical plane theory, a continuous stress parameter was proposed to quantify the driving force of the fatigue crack initiation for the fully reversed multiaxial fatigue loading. In this stress parameter, the shear stress amplitude and normal stress amplitude on the critical plane were combined with the variable coefficients which were affected by the normalized fatigue life and the loading non‐proportionality. Owing to these coefficients, for the multiaxial loadings with different non‐proportionalities, the driving force of the fatigue crack initiation during the whole life could be described. After that, a novel accumulative fatigue damage model was established for the multiaxial two‐stage step spectrum. In this model, the accumulative damage was calculated according to the variation of the proposed stress parameter on the critical plane. Considering the directionality of the multiaxial fatigue damage, for the spectrum in which the loading path was variable, the damage accumulation was carried out on the critical planes of the both loadings, and the larger one was chosen as the final accumulative fatigue damage. In order to verify the new model, up to 41 different multiaxial two‐stage step spectrum loading tests on 2024‐T4 aluminium alloy were collected. The new model, as well as other five commonly used models, was applied to calculate the accumulative fatigue damage. The final results showed that, compared with other commonly used models, the new model had the most accurate results with the smallest scatters.     

Strain-based multiaxial fatigue damage modelling

A new multiaxial fatigue damage model named characteristic plane approach is proposed in this paper, in which the strain components are used to correlate with the fatigue damage. The characteristic plane is defined as a material plane on which the complex three‐dimensional (3D) fatigue problem can be approximated using the plane strain components. Compared with most available critical plane‐based models for multiaxial fatigue problem, the physical basis of the characteristic plane does not rely on the observations of the fatigue crack in the proposed model. The cracking information is not required for multiaxial fatigue analysis, and the proposed model can automatically adapt for different failure modes, such as shear or tensile‐dominated failure. Mean stress effect is also included in the proposed model by a correction factor. The life predictions of the proposed fatigue damage model under constant amplitude loading are compared with a wide range of metal fatigue results in the literature.     

Low‐cycle fatigue life prediction of various metallic materials under multiaxial loading

This paper proposed a simple life prediction model for assessing fatigue lives of metallic materials subjected to multiaxial low‐cycle fatigue (LCF) loading. This proposed model consists of the maximum shear strain range, the normal strain range and the maximum normal stress on the maximum shear strain range plane. Additional cyclic hardening developed during non‐proportional loading is included in the normal stress and strain terms. A computer‐based procedure for multiaxial fatigue life prediction incorporating critical plane damage parameters is presented as well. The accuracy and reliability of the proposed model are systematically checked by using about 300 test data through testing nine kinds of material under both zero and non‐zero mean stress multiaxial loading paths.     

Evaluation of fatigue life for titanium alloy TC4 under variable amplitude multiaxial loading

Fatigue tests under variable amplitude multiaxial loading were conducted on titanium alloy TC4 tubular specimens. A method to estimate the fatigue life under variable amplitude multiaxial loading has been proposed. Multiaxial fatigue parameter based on Wu–Hu–Song approach and rainflow cycle counting and Miner–Palmgren rule were applied in this method. The capability of fatigue life prediction for the proposed method was checked against the test data of TC4 alloy under variable amplitude multiaxial loading. The prediction results are all within a factor of two scatter band of the test results.     

Multiaxial notch fatigue life prediction based on the dominated loading control mode under variable amplitude loading

A new calculation approach is suggested to the fatigue life evaluation of notched specimens under multiaxial variable amplitude loading. Within this suggested approach, if the computed uniaxial fatigue damage by the pure torsional loading path is larger than that by the axial tension–compression loading path, a shear strain‐based multiaxial fatigue damage parameter is assigned to calculate multiaxial fatigue damage; otherwise, an axial strain‐based multiaxial fatigue damage parameter is assigned to calculate multiaxial fatigue damage. Furthermore, the presented method employs shear strain‐based and axial strain‐based multiaxial fatigue damage parameters in substitution of equivalent strain amplitude to consider the influence of nonproportional additional hardening. The experimental data of GH4169 superalloy and 7050‐T7451 aluminium alloy notched components are used to illustrate the presented multiaxial fatigue lifetime estimation approach for notched components, and the results reveal that estimations are accurate.     

Fatigue life analysis and predictions for NR and SBR under variable amplitude and multiaxial loading conditions

This paper investigates the effects of variable amplitude loading conditions on the fatigue lives of multiaxial rubber specimens. Two filled rubber materials were used and compared to investigate the effects of strain-crystallization on crack development NR, which strain crystallizes, and SBR, which does not. The applicability of Miner’s linear damage rule for predicting fatigue lives of variable amplitude tests in rubber and the use of both scalar and plane-specific equivalence parameters to characterize fatigue life results were also investigated. A fatigue life prediction approach that utilizes normal strain to find the critical plane and the cracking energy density on that plane to determine fatigue life is introduced and compared to other approaches. The effects of load sequence and temperature on fatigue life, as well as differences in fatigue lives using both stiffness and critical crack length failure criteria are discussed.     

Fatigue assessment of metallic components under uniaxial and multiaxial variable amplitude loading

In the present paper, the fatigue lifetime of metallic structural components subjected to variable amplitude loading is evaluated by applying 2 different multiaxial high‐cycle fatigue criteria. Such criteria, proposed by some of the present authors, are based on the critical plane approach and aim at reducing a given multiaxial stress state to an equivalent uniaxial stress condition. In particular, the procedure employed by both criteria consists of the following 3 steps: (1) definition of the critical plane; (2) counting of loading cycles; and (3) estimation of fatigue damage. Finally, the previous criteria are validated by comparing the theoretical results with experimental data related to smooth metallic specimens subjected to uniaxial and multiaxial variable amplitude loading.     

Stochastic modelling of low-cycle fatigue damage in 316L stainless steel under variable multiaxial loading

In the present study, a stochastic model is developed for the low-cycle fatigue life prediction and reliability assessment of 316L stainless steel under variable multiaxial loading. In the proposed model, fatigue phenomenon is considered as a Markov process, and damage vector and reliability are defined on every plane. Any low-cycle fatigue damage evaluating method can be included in the proposed model. The model enables calculation of statistical reliability and crack initiation direction under variable multiaxial loading, which are generally not available. In the present study, a critical plane method proposed by Kandil et al . ( Metals Soc., London 280, 203–210, 1982) maximum tensile strain range, and von Mises equivalent strain range are used to calculate fatigue damage. When the critical plane method is chosen, the effect of multiple critical planes is also included in the proposed model. Maximum tensile strain and von Mises strain methods are used for the demonstration of the generality of the proposed model. The material properties and the stochastic model parameters are obtained from uniaxial tests only. The stochastic model made of the parameters obtained from the uniaxial tests is applied to the life prediction and reliability assessment of 316L stainless steel under variable multiaxial loading. The predicted results show good aggreement with experimental results.     

Cumulative damage model based on equivalent fatigue under multiaxial thermomechanical random loading

A new creep–fatigue damage cumulative model is proposed under multiaxial thermomechanical random loading, in which the damage at high temperature can be divided into the pure fatigue damage and the equivalent fatigue damage from creep. During the damage accumulation process, the elementary percentage of the equivalent fatigue damage increment is proportional to that of the creep damage increment, and the creep damage is converted to the equivalent fatigue damage. Moreover, combined with a multiaxial cyclic counting method, a life prediction method is developed based on the proposed creep–fatigue damage cumulative model. In the developed life prediction method, the effects of nonproportional hardening on the fatigue and creep damages are considered, and the influence of mean stress on damage is also taken into account. The thermomechanical fatigue experimental data for thin‐walled tubular specimen of superalloy GH4169 under multiaxial constant amplitude and variable amplitude loadings were used to verify the proposed model. The results showed that the proposed method can obtain satisfactory life prediction results.     

Critical plane approach with two families of microcracks for modelling of unilateral fatigue damage

New multiaxial fatigue damage model based on the critical plane approach is proposed. Two different physical mechanisms of the fatigue damage development on each potential failure plane (critical plane) are considered. In general, each critical plane contains two families of a parallel microcracks. The proposed model reproduces simultaneously fatigue damage induced anisotropy, the influence of positive and negative mean stresses, unilateral fatigue damage, microcrack closure effect and fatigue behaviour under variable amplitude loading. The expression for the equivalent stress in the damage evolution equation includes the stress intensity for the amplitudes as well as joint invariants for the mean values of the stress tensor and for the vectors associated with the directions of microcracks. The theoretical predictions are compared with experimental data under uniaxial cyclic loading of brass specimens. The influence of positive and negative mean stresses on the fatigue life of brass is investigated.     

A novel engineering method based on the critical plane concept to estimate the lifetime of weldments subjected to variable amplitude multiaxial fatigue loading

This paper summarizes an attempt at proposing a new engineering method suitable for estimating the fatigue lifetime of steel‐ and aluminium‐welded connections subjected to variable amplitude multiaxial fatigue loading. In particular, the proposed approach is based on the use of the so‐called Modified Wöhler Curve Method (MWCM), i.e. a bi‐parametrical critical plane approach, whose accuracy has been checked so far solely in addressing the constant amplitude multiaxial fatigue problem. In order to extend the use of our criterion to variable amplitude situations, the critical plane is suggested here as being determined by taking full advantage of the maximum variance concept, that is, such a plane is assumed to be the one containing the direction along which the variance of the resolved shear stress reaches its maximum value. The main advantage of such a strategy is that the cycle counting can directly be performed by considering the shear stress resolved along the maximum variance direction: by so doing, the problem is greatly simplified, allowing those well‐established cycle counting methods specifically devised to address the uniaxial variable amplitude problem to be extended to those situations involving multiaxial fatigue loading. The validity of the proposed methodology was checked by using two different datasets taken from the literature and generated by testing both steel and aluminium tube‐to‐plate welded connections subjected to in‐phase and 90° out‐of‐phase variable amplitude bending and torsion. This new fatigue life assessment technique was seen to be highly accurate allowing the estimates to fall within the calibration scatter bands not only when the constants in the governing equations were calculated by using the experimental uniaxial and torsional fully reversed fatigue curves, but also when they were determined by using the reference curves supplied, for the investigated geometry, by the available standard codes. These results seem to strongly support the idea that, thanks to its peculiar features, our method can be considered as an effective engineering approach capable of performing multiaxial fatigue assessment under variable amplitude loading which fully complies with the recommendations of the available standard codes.     

A new path‐dependent multiaxial fatigue model for metals under different paths

Based on the critical plane approach, a new path‐dependent multiaxial fatigue model in low‐cycle fatigue is proposed. The proposed model includes damage contribution from four sources: the normal strain amplitude, the shear strain amplitude on the critical plane, the hydrostatic mean strain and a new path‐dependent factor. The effect of mean strain is considered by the hydrostatic mean strain. The experimental data of 11 kinds of materials are used to demonstrate the effectiveness of this new model under both zero and non‐zero mean strain multiaxial loading path.