Multiaxial notch fatigue life prediction based on pseudo stress correction and finite element analysis under variable amplitude loading

A new computational methodology is proposed for fatigue life prediction of notched components subjected to variable amplitude multiaxial loading. In the proposed methodology, an estimation method of non‐proportionality factor (F) proposed by authors in the case of constant amplitude multiaxial loading is extended and applied to variable amplitude multiaxial loading by using Wang‐Brown's reversal counting approach. The pseudo stress correction method integrated with linear elastic finite element analysis is utilized to calculate the local elastic‐plastic stress and strain responses at the notch root. For whole local strain history, the plane with weight‐averaged maximum shear strain range is defined as the critical plane in this study. Based on the defined critical plane, a multiaxial fatigue damage model combined with Miner's linear cumulative damage law is used to predict fatigue life. The experimentally obtained fatigue data for 7050‐T7451 aluminium alloy notched shaft specimens under constant and variable amplitude multiaxial loadings are used to verify the proposed methodology and equivalent strain‐based methodology. The results show that the proposed methodology is superior to equivalent strain‐based methodology.     

A weight function-critical plane approach for low-cycle fatigue under variable amplitude multiaxial loading

Low‐cycle fatigue data of type 304 stainless steel obtained under axial‐torsional loading of variable amplitudes are analyzed using four multiaxial fatigue parameters: SWT, KBM, FS and LKN. Rainflow cycle counting and Morrow's plastic work interaction rule are used to calculate fatigue damage. The performance of a fatigue model is dependent on the fatigue parameter, the critical plane and the damage accumulation rule employed in the model. The conservatism and non‐conservatism of predicted lives are examined for some combinations of these variables. A new critical plane called the weight function‐critical plane is introduced for variable amplitude loading. This approach is found to improve the KBM‐based life predictions.     

Prediction methods of fatigue critical point for notched components under multiaxial fatigue loading

Two methods based on local stress responses are proposed to locate fatigue critical point of metallic notched components under non‐proportional loading. The points on the notch edge maintain a state of uniaxial stress even when the far‐field fatigue loading is multiaxial. The point bearing the maximum stress amplitude is recognized as fatigue critical point under the condition of non‐mean stress; otherwise, the Goodman's empirical formula is adopted to amend mean stress effect prior to the determination of fatigue critical point. Furthermore, the uniaxial stress state can be treated as a special multiaxial stress state. The Susmel's fatigue damage parameter is employed to evaluate the fatigue damage of these points on the notch edge. Multiaxial fatigue tests on thin‐walled round tube notched specimens made of GH4169 nickel‐base alloy and 2297 aluminium‐lithium alloy are carried out to verify the two methods. The prediction results show that both the stress amplitude method and the Susmel's parameter method can accurately locate the fatigue critical point of metallic notched components under multiaxial fatigue loading.     

Multiaxial low‐cycle fatigue life evaluation under different non‐proportional loading paths

This paper presents analytical and experimental investigations for fatigue lives of structures under uniaxial, torsional, multiaxial proportional, and non‐proportional loading conditions. It is known that the rotation of principal stress/strain axes and material additional hardening due to non‐proportionality of cycle loading are the 2 main causes resulting in shorter fatigue lives compared with those under proportional loading. This paper treats these 2 causes as independent factors influencing multiaxial fatigue damage and proposes a new non‐proportional influencing parameter to consider their combined effects on the fatigue lives of structures. A critical plane model for multiaxial fatigue lives prediction is also proposed by using the proposed non‐proportional influencing factor to modify the Fatemi‐Socie model. The comparison between experiment results and theoretical evaluation shows that the proposed model can effectively predict the fatigue life due to multiaxial non‐proportional loading.     

Multiaxial fatigue and life prediction of elastomeric components

Elastomeric components have wide usage in many industries. The typical service loading for most of these components is variable amplitude and multiaxial. In this study a general methodology for life prediction of elastomeric components under these typical loading conditions was developed and illustrated for a passenger vehicle cradle mount. Crack initiation life prediction was performed using different damage criteria. The methodology was validated with component testing under different loading conditions including constant and variable amplitude in-phase and out-of-phase axial–torsion experiments. The optimum method for crack initiation life prediction for complex multiaxial variable amplitude loading was found to be a critical plane approach based on maximum normal strain plane and damage quantification by cracking energy density on that plane. Rainflow cycle counting method and Miner’s linear damage rule were used for predicting fatigue life under variable amplitude loadings. The fracture mechanics approach was used for total fatigue life prediction of the component based on specimen crack growth data and FE simulation results. Total fatigue life prediction results showed good agreement with experiments for all of the loading conditions considered.     

Low‐cycle fatigue life prediction of various metallic materials under multiaxial loading

This paper proposed a simple life prediction model for assessing fatigue lives of metallic materials subjected to multiaxial low‐cycle fatigue (LCF) loading. This proposed model consists of the maximum shear strain range, the normal strain range and the maximum normal stress on the maximum shear strain range plane. Additional cyclic hardening developed during non‐proportional loading is included in the normal stress and strain terms. A computer‐based procedure for multiaxial fatigue life prediction incorporating critical plane damage parameters is presented as well. The accuracy and reliability of the proposed model are systematically checked by using about 300 test data through testing nine kinds of material under both zero and non‐zero mean stress multiaxial loading paths.     

Biaxial fatigue for proportional and non‐proportional loading paths

In order to study the use of a local approach to predict crack‐initiation life on notches in mechanical components under multiaxial fatigue conditions, the study of the local cyclic elasto‐plastic behaviour and the selection of an appropriate multiaxial fatigue model are essential steps in fatigue‐life prediction. The evolution of stress–strain fields from the initial state to the stabilized state depends on the material type, loading amplitude and loading paths. A series of biaxial tension–compression tests with static or cyclic torsion were carried out on a biaxial servo‐hydraulic testing machine. Specimens were made of an alloy steel 42CrMo4 quenched and tempered. The shear stress relaxations of the cyclic tension–compression with a steady torsion angle were observed for various loading levels. Finite element analyses were used to simulate the cyclic behaviour and good agreement was found. Based on the local stabilized cyclic elastic–plastic stress–strain responses, the strain‐based multiaxial fatigue damage parameters were applied and correlated with the experimentally obtained lives. As a comparison, a stress‐invariant‐based approach with the minimum circumscribed ellipse (MCE) approach for evaluating the effective shear stress amplitude was also applied for fatigue life prediction. The comparison showed that both the equivalent strain range and the stress‐invariant parameter with non‐proportional factors correlated well with the experimental results obtained in this study.     

High-cycle fatigue mechanisms in 1045 steel under non-proportional axial-torsional loading

Detailed microscopic analyses have been made on the high-cycle mechanisms in 1045 steel under various stress-controlled axial-torsional loadings. A special attention has been paid to a critical example of non-proportional loading, i.e., 90° out-of-phase loading with different stress ratios. The replica technique has been used to monitor crack initiation and propagation from the microstructure scale. The orientations of persistent slip bands and Stage I cracks are in good agreement with the critical plane concept. The evolutions of crack length with cycle life as well as the crack aspect ratios depend on the loading condition. However at a given life, the data are consolidated in terms of crack depth versus cycle life. The McDiarmid parameter correlates stress-life data under proportional loadings. However, it underestimates fatigue lives under out-of-phase loading at high stress ratio and it overestimates them in the case where all planes experience the same shear stress amplitude (stress ratio = 0.5). More damaging mechanisms are involved in crack initiation and crack propagation. It is recommended to test the fatigue performance of materials in this last condition that involves the worst damage mechanisms.     

Strain-based multiaxial fatigue damage modelling

A new multiaxial fatigue damage model named characteristic plane approach is proposed in this paper, in which the strain components are used to correlate with the fatigue damage. The characteristic plane is defined as a material plane on which the complex three‐dimensional (3D) fatigue problem can be approximated using the plane strain components. Compared with most available critical plane‐based models for multiaxial fatigue problem, the physical basis of the characteristic plane does not rely on the observations of the fatigue crack in the proposed model. The cracking information is not required for multiaxial fatigue analysis, and the proposed model can automatically adapt for different failure modes, such as shear or tensile‐dominated failure. Mean stress effect is also included in the proposed model by a correction factor. The life predictions of the proposed fatigue damage model under constant amplitude loading are compared with a wide range of metal fatigue results in the literature.     

Study on the accumulative fatigue damage rules under multiaxial two‐stage step spectra constructed by loadings with similar lives

In this paper, the influence on the multiaxial fatigue damage accumulation caused by loading path variation was studied. For 2024‐T4 aluminium alloy, the damage evolution during the entire life was first observed. On the basis of the observation, the stage I of fatigue damage evolution was further divided into two sub‐stages, and the dominant stress parameters of these two sub‐stages were proposed. Taking the dominant stress parameters into account, a phased accumulative fatigue damage model was proposed. Then, 12 multiaxial two‐stage step spectra constructed by loadings with approximately identical fatigue lives were carried out on 2024‐T4 aluminium alloy. The accumulative fatigue damage was calculated by the proposed model, and another five commonly used models and the calculated results were compared. According to the comparison, the newly proposed model had the most accurate results with the smallest scatter.     

Crack initiation and growth path under multiaxial fatigue loading in structural steels

In real engineering components and structures many accidental failures occur due to unexpected or additional loadings, such as additional bending or torsion. There are many factors influencing the fatigue crack paths, such as the material type (microstructure), structural geometry and loading path. It is widely believed that fatigue crack nucleation and early crack growth are caused by cyclic plasticity. This paper studies the effects of multiaxial loading paths on the cyclic deformation behaviour, crack initiation and crack path. Three types of structural steels are studied: Ck45, medium carbon steel, 42CrMo4, low alloy steel and the AISI 303 stainless steel. Four biaxial loading paths were applied in the tests to observe the effects of multiaxial loading paths on the additional hardening, fatigue crack initiation and crack propagation orientation. Fractographic analyses of the plane orientations of crack initiation and propagation were carried out by optical microscope and SEM approaches. It is shown that these materials have different crack orientations under the same loading path, due to their different cyclic plasticity behaviour and different sensitivity to non-proportional loading. Theoretical predictions of the damage plane were conducted using the critical plane approaches, either based on stress analysis or strain analysis (Findley, Smith–Watson–Topper, Fatemi–Socie, Wang–Brown–Miller, etc). Comparisons of the predicted crack orientation based on the critical plane approaches with the experimental observations for the wide range of loading paths and the three structural materials are shown and discussed. Results show the applicability of the critical plane approaches to predict the fatigue life and crack initial orientation in structural steels.     

Cumulative damage model based on equivalent fatigue under multiaxial thermomechanical random loading

A new creep–fatigue damage cumulative model is proposed under multiaxial thermomechanical random loading, in which the damage at high temperature can be divided into the pure fatigue damage and the equivalent fatigue damage from creep. During the damage accumulation process, the elementary percentage of the equivalent fatigue damage increment is proportional to that of the creep damage increment, and the creep damage is converted to the equivalent fatigue damage. Moreover, combined with a multiaxial cyclic counting method, a life prediction method is developed based on the proposed creep–fatigue damage cumulative model. In the developed life prediction method, the effects of nonproportional hardening on the fatigue and creep damages are considered, and the influence of mean stress on damage is also taken into account. The thermomechanical fatigue experimental data for thin‐walled tubular specimen of superalloy GH4169 under multiaxial constant amplitude and variable amplitude loadings were used to verify the proposed model. The results showed that the proposed method can obtain satisfactory life prediction results.     

Life prediction based on weight‐averaged maximum shear strain range plane under multiaxial variable amplitude loading

Based on Wang and Brown's reversal counting method, a new approach to the determination of the critical plane is proposed by the defined plane with a weight‐averaged maximum shear strain range under multiaxial variable amplitude loading. According to the determined critical plane, a detailed procedure of multiaxial fatigue life prediction is introduced to predict lives in the low‐cycle multiaxial fatigue regime. The proposed approach is verified by two multiaxial fatigue damage models and Miner's linear cumulative damage law. The results showed that the proposed approach can effectively predict the orientation of the failure plane under multiaxial variable amplitude loading and give a satisfactory life prediction.     

Analytical and experimental studies on fatigue crack path under complex multi-axial loading

In real engineering components and structures, many accidental failures are due to unexpected or additional loadings, such as additional bending or torsion, etc. Fractographical analyses of the failure surface and the crack orientation are helpful for identifying the effects of the non‐proportional multi‐axial loading. There are many factors that influence fatigue crack paths. This paper studies the effects of multi‐axial loading path on the crack path. Two kinds of materials were studied and compared in this paper: AISI 303 stainless steel and 42CrMo4 steel. Experiments were conducted in a biaxial testing machine INSTRON 8800. Six different biaxial loading paths were selected and applied in the tests to observe the effects of multi‐axial loading paths on the additional hardening, fatigue life and the crack propagation orientation. Fractographic analyses of the plane orientations of crack initiation and propagation were carried out by optical microscope and SEM approaches. It was shown that the two materials studied had different crack orientations under the same loading path, due to their different cyclic plasticity behaviour and different sensitivity to non‐proportional loading. Theoretical predictions of the damage plane were made using the critical plane approaches such as the Brown–Miller, the Findley, the Wang–Brown, the Fatemi–Socie, the Smith–Watson–Topper and the Liu's criteria. Comparisons of the predicted orientation of the damage plane with the experimental observations show that the critical plane models give satisfactory predictions for the orientations of early crack growth of the 42CrMo4 steel, but less accurate predictions were obtained for the AISI 303 stainless steel. This observation appears to show that the applicability of the fatigue models is dependent on the material type and multi‐axial microstructure characteristics.     

Fatigue analysis of railway wheel using a multiaxial strain‐based critical‐plane index

A fatigue damage model to assess the development of subsurface fatigue cracks in railway wheels is presented in this paper. A 3‐dimensional finite element model (FEM) is constructed to simulate repeated cycles of contact loading between a railway wheel and a rail. The computational approach includes a hard‐contact over‐closure relationship and an elastoplastic material model with isotropic and kinematic hardening. Results from the simulation are used in a multiaxial critical‐plane fatigue damage analysis. The employed strain‐based critical‐plane fatigue damage approach is based on Fatemi‐Socie fatigue index that takes into account the non‐proportional and out‐of‐phase nature of the multiaxial state of stress occurs when a railway wheel rolls on a rail. It predicts fatigue‐induced micro‐crack nucleation at a depth of about 3.7 mm beneath the wheel tread, as well as the crack plane growth orientation which indicates the possible failure pattern. Additionally, the influence of various factors such as contribution of normal stresses, higher wheel load, and material model have been investigated.     

A fatigue criterion for general multiaxial loading

An incremental fatigue damage model is proposed. The model incorporates the critical plane concept in multiaxial fatigue, plastic strain energy and material memory in cyclic plasticity. With an incremental form the model does not require a cycle counting method for variable amplitude loading. The model is designed to consider mean stress and loading sequence effects. Features of the new model are discussed and the determination of material constants is detailed. Verification of the model is achieved by comparing the predictions obtained by using the new model and experimental data of four materials under different loading conditions.     

A critical plane‐energy model for multiaxial fatigue life prediction

A new critical plane‐energy model is proposed in this paper for multiaxial fatigue life prediction of metals. A brief review of existing methods, especially on the critical plane‐based and energy‐based methods, is given first. Special focus is on the Liu–Mahadevan critical plane approach, which has been shown to work for both brittle and ductile metals. One potential drawback of the Liu–Mahadevan model is that it needs an empirical calibration parameter for non‐proportional multiaxial loadings because only the strain terms are used and the out‐of‐phase hardening cannot be explicitly considered. An energy‐based model using the Liu–Mahadevan concept is proposed with the help of the Mróz–Garud plasticity model. Thus, the empirical calibration for non‐proportional loading is not needed because the out‐of‐phase hardening is naturally included in the stress calculation. The model predictions are compared with experimental data from open literature, and the proposed model is shown to work for both proportional and non‐proportional multiaxial loadings without the empirical calibration.     

Criteria of multiaxial random fatigue based on stress,strain and energy parameters of damage in the critical plane

In this paper generalized criteria of multiaxial random fatigue based on stress, strain and strain energy density parameters in the critical plane have been discussed. The proposed criteria reduce multiaxial state of stress to the equivalent uniaxial tension–compression or alternating bending. Relations between the coefficients occurring in the considered criteria have been derived. Thus, it is possible to take into account fatigue properties of materials under simple loading states during determination of the multiaxial fatigue life. Presented models have successfully correlated fatigue lives of cast iron GGG40 and steel 18G2A specimens under constant amplitude in‐phase and out‐of‐phase loadings including different frequencies.     

Effects of non-proportional loading paths on the orientation of fatigue crack path

Fatigue crack path prediction and crack arrest are very important for structural safety. In real engineering structures, there are many factors influencing the fatigue crack paths, such as the material type (microstructure), structural geometry and loading path, etc. In this paper, both experimental and numerical methods are applied to study the effects of loading path on crack orientations. Experiments were conducted on a biaxial testing machine, using specimens made of two steels: 42CrMo4 and CK45 (equivalent to AISI 1045), with six different biaxial loading paths. Fractographical analyses of the plane of the stage I crack propagation were carried out and the crack orientations were measured using optical microscopy. The multiaxial fatigue models, such as the critical plane models and also the energy‐based critical plane models, were applied for predicting the orientation of the critical plane. Comparisons of the predicted orientation of the damage plane with the experimental observations show that the shear‐based multiaxial fatigue models provide good predictions for stage I crack growth for the ductile materials studied in this paper.     

Estimating fatigue damage under variable amplitude multiaxial fatigue loading

The present paper is concerned with the use of the modified Wöhler curve method (MWCM) to estimate both lifetime and high‐cycle fatigue strength of plain engineering materials subjected to complex load histories resulting, at critical locations, in variable amplitude (VA) multiaxial stress states. In more detail, when employed to address the constant amplitude (CA) problem, the MWCM postulates that fatigue damage reaches its maximum value on that material plane (i.e. the so‐called critical plane) experiencing the maximum shear stress amplitude, fatigue strength depending on the ratio between the normal and shear stress components relative to the critical plane itself. To extend the use of the above criterion to those situations involving VA loadings, the MWCM is suggested here as being applied by defining the critical plane through that direction experiencing the maximum variance of the resolved shear stress. Such a direction is used also to perform the cycle counting: because the resolved shear stress is a monodimensional quantity, stress cycles are directly counted by the classical rain‐flow method. The degree of multiaxiality and non‐proportionality of the time‐variable stress state at the assumed critical sites instead is suggested as being measured through a suitable stress ratio which accounts for the mean value and the variance of the stress perpendicular to the critical plane as well as for the variance of the shear stress resolved along the direction experiencing the maximum variance of the resolved shear stress. Accuracy and reliability of the proposed approach was checked by using several experimental results taken from the literature. The performed validation exercise seems to strongly support the idea that the approach formalized in the present paper is a powerful engineering tool suitable for estimating fatigue damage under VA multiaxial fatigue loading, and this holds true not only in the medium‐cycle, but also in the high‐cycle fatigue regime.