Microstructural,chemical and textural characterization of ZnO nanorods synthesized by aerosol assisted chemical vapor deposition

ZnO nanorods were synthesized by aerosol assisted chemical vapor deposition onto TiO₂ covered borosilicate glass substrates. Deposition parameters were optimized and kept constant. Solely the effect of different nozzle velocities on the growth of ZnO nanorods was evaluated in order to develop a dense and uniform structure. The crystalline structure was characterized by conventional X-ray diffraction in grazing incidence and Bragg–Brentano configurations. In addition, two-dimensional grazing incidence synchrotron radiation diffraction was employed to determine the preferred growth direction of the nanorods. Morphology and growth characteristics analyzed by electron microscopy were correlated with diffraction outcomes. Chemical composition was established by X-ray photoelectron spectroscopy. X-ray diffraction results and X-ray photoelectron spectroscopy showed the presence of wurtzite ZnO and anatase TiO₂ phases. Morphological changes noticed when the deposition velocity was lowered to the minimum, indicated the formation of relatively vertically oriented nanorods evenly distributed onto the TiO₂ buffer film. By coupling two-dimensional X-ray diffraction and computational modeling with ANAELU it was proved that a successful texture determination was achieved and confirmed by scanning electron microscopy analysis. Texture analysis led to the conclusion of a preferred growth direction in [001] having a distribution width Ω = 20° ± 2°.     

Fabrication of flower-like ZnO microstructures from ZnO nanorods and their photoluminescence properties

In the present work, we reported a novel method for the synthesis of well-dispersed flower-like ZnO microstructures derived from highly regulated, well-dispersed ZnO nanorods by using low temperature (100 °C) hydrothermal process and without using any additional surfactant, organic solvents or catalytic agent. The phase and structural analysis were carried out by X-ray diffraction (XRD) which confirms the high crystal quality of ZnO with hexagonal (wurtzite-type) crystal structure. The morphological and structural analyses were carried out by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) which indicate the formation of well-dispersed ZnO nanorods as well as flower-like ZnO. It has been shown that flower-like ZnO is made up of dozen of ZnO nanorods building block units. The high resolution transmission electron microscopy (HRTEM) and their corresponding selected area electron diffraction (SAED) pattern show that both ZnO nanorods and flower-like ZnO microstructures are single crystalline in nature and preferentially grow along [0 0 0 1] direction. Their optical property was characterized by photoluminescence spectroscopy; shows ZnO nanorods have only violet emission and no other emission while flower-like ZnO microstructures have a weak violet emission and a strong visible emission. A plausible growth mechanism of ZnO nanorods as well as flower-like ZnO microstructures has been given.     

Flame synthesis of zinc oxide nanocrystals

Distinctive zinc oxide (ZnO) nanocrystals were synthesized on the surface of Zn probes using a counter-flow flame medium formed by methane/acetylene and oxygen-enriched air streams. The source material, a zinc wire with a purity of ～99.99% and diameter of 1 mm, was introduced through a sleeve into the oxygen rich region of the flame. The position of the probe/sleeve was varied within the flame medium resulting in growth variation of ZnO nanocrystals on the surface of the probe. The shape and structural parameters of the grown crystals strongly depend on the flame position. Structural variations of the synthesized crystals include single-crystalline ZnO nanorods and microprisms (ZMPs) (the ZMPs have less than a few micrometers in length and several hundred nanometers in cross section) with a large number of facets and complex axial symmetry with a nanorod protruding from their tips. The protruding rods are less than 100 nm in diameter and lengths are less than 1 μm. The protruding nanorods can be elongated several times by increasing the residence time of the probe/sleeve inside the oxygen-rich flame or by varying the flame position. At different flame heights, nanorods having higher length-to-diameter aspect-ratio can be synthesized. A lattice spacing of ～0.26 nm was measured for the synthesized nanorods, which can be closely correlated with the (0 0 2) interplanar spacing of hexagonal ZnO (Wurtzite) cells. The synthesized nanostructures were analyzed by scanning electron microscopy (SEM), transmission electron microscopy (TEM), high resolution TEM (HR-TEM), X-ray energy dispersive spectroscopy (EDS), and selected area electron diffraction pattern (SAED). The growth mechanism of the ZnO nanostructures is discussed.     

Preparation of nano-sized flower-like ZnO bunches by a direct precipitation method

In this work, nano-sized ZnO particles were prepared by a direct precipitation method with Zn(NO₃)₂·6H₂O and NH₃·H₂O as raw materials, and the impact of the synthesis process was studied. The optimal thermal calcined temperature of precursor precipitates of ZnO was obtained from the differential thermal analysis (DTA) and the thermal gravimetric analysis (TGA) curves. The purity, microstructure, morphology of the calcined ZnO powders were studied by X-ray diffraction (XRD), energy dispersive X-ray spectrum (EDS), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The synthesized ZnO powders had a wurtzite structure with high purity. The final products were of flower-like shape and the nanorods which consisted of the flower-like ZnO bunches were 20–100 nm in diameter and 0.5–1 μm in length. The effect of process conditions on the morphology of ZnO was discussed.     

Structure and field emission properties of SnO2 nanowires

SnO₂ nanowires were fabricated using a simple and economical method of rapid heating SnO₂ and graphite powders at 850 °C in a flow of high-purity N₂ as carrier gas. Research by using X-ray diffraction (XRD) indicates that SnO₂ nanowires are primitive tetragonal in structure with the lattice constant a = b = 0.443 nm and c = 0.372 nm. Observations by using scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show that SnO₂ is of nanowire structure. The selected area electron diffraction (SAED) shows that the nanowires are perfect single crystal structure. The Fourier transform infrared (FT-IR) exhibits the difference of nanostructure materials and general materials. The field emission (FE) properties had also been studied.     

Effect of annealing on the magnetic properties of solution synthesized Zn1−xMnxO nanorods

Mn-doped ZnO nanorods with ～30 nm in diameter and ～200 nm in length were synthesized by a seed-mediated solution method. The structures, magnetic properties, as well as the annealing effect were characterized by transmission electron microscopy, electron energy loss spectroscopy, X-ray diffraction, X-ray photoelectron spectroscopy, Raman spectrum and physical properties measurement system. Magnetic properties measurement revealed that the Zn_0.97Mn_0.03O nanorods exhibited ferromagnetism with a saturation magnetization of 0.005 emu g^?1 and a coercivity of 110 Oe at 305 K. After annealing the samples at 900 °C for 2 h in air, the nanorods were transformed into nanoparticle aggregates. The coercivity and saturation magnetization increased obviously. Detailed analyses proved that a phase-separation process was happened at the high temperature. In this process, most of the particles preserved the wurtzite ZnO structure, while a few small ones evolved into spinel-structured particles. The increasing of the ferromagnetism of the annealed sample is attributed to the formation of secondary phase Zn_xMn_3?xO_4.     

Effects of temperature on ZnO hybrids grown by metal-organic chemical vapor deposition

The growth of three-dimensional ZnO hybrid structures by metal-organic chemical vapor deposition was controlled through their growth pressure and temperature. Vertically aligned ZnO nanorods were grown on c-plane of sapphire substrate at 600 °C and 400 Torr. ZnO film was then formed in situ on the ZnO nanorods at 100, 600, and 700 °C and 10 Torr. High-resolution X-ray diffraction measurements showed that the ZnO film on the nanorods/sapphire grew epitaxially, and that the ZnO film/nanorods hybrid structures had well-ordered wurtzite structures. The hybrid ZnO structure was shown to be about 3–5 μm by field-emission scanning electron microscopy. The hybrid formed at 600 °C showed better crystalline quality those formed at 100 °C or 700 °C. These structures have potential applicability as nanobuilding blocks in nanodevices.     

Facile ultrasound-assisted synthesis of ZnO nanorods in an ionic liquid

ZnO nanocrystals have been synthesized by ultrasound-assisted synthesis from Zn(CH₃COO)₂2H₂O and NaOH in the neat room-temperature ionic-liquid 1-butyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide, [C₄mim][Tf₂N]. Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) show that the formed ZnO nanocrystals are of rod like shape with lengths from 50 to 100 nm and diameters of about 20 nm. X-ray diffraction (XRD) confirms the crystallinity as well as the sample purity. The band gap of the as-prepared ZnO nanorods was estimated to be 3.31 eV from UV–Vis absorption measurements. The photoluminescence spectrum shows the characteristic greenish emission of ZnO at room temperature (λ_max = 563 nm). The ZnO bonding levels have been determined by X-ray photoelectron spectroscopy (XPS). Nitrogen adsorption–desorption measurements show typical samples to have a specific surface area of 49.93 m²/g.     

Anionic surfactant-assisted hydrothermal synthesis of high-aspect-ratio ZnO nanowires and their photoluminescence property

ZnO nanowires with high-aspect-ratio of up to ca. 600 were synthesized in a quaternary reverse microemulsion containing sodium dodecyl sulfate (SDS) / water / heptane / n-hexane via a hydrothermal method. SDS, as an anionic surfactant, plays an important role in the formation of morphologies. Subsequently, we studied lots of key influencing factors including the molar ratio (w) value of NaOH to Zn(OAc)₂, the reaction temperature, and the instance without the quaternary reverse microemulsion. The selected-area electron diffraction (SAED) and high-resolution transmission electron microscopy (HRTEM) reveal the single-crystal nature of the ZnO nanowires. The morphologies and crystalline structure of the as-obtained products were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and powder X-ray diffraction (XRD), respectively. Through this route, we can obtain a mass of products and the method is both convenient and reproducible. Finally, we measured the photoluminescence (PL) spectra and found that the ZnO nanowires exhibited green-orange emission at 525 nm and short ultraviolet emission at 380 nm and the ZnO nanomaterials with different aspect ratio (length to diameter) (L / D) showed PL intensity disciplinary change. Aiming at this phenomenon, we propose a reasonable mechanism to explain the PL spectra of the ZnO nanomaterials in detail.     

ZnO films and nanorod/shell arrays electrodeposited on PET-ITO electrodes

In this work, ZnO films, nanorod and nanorod/shell arrays were synthesized on the surface of PET-ITO electrodes by electrochemical methods. ZnO films with high optical transmittance were prepared from a zinc nitrate solution using a pulsed current technique with a reduced pulse time (3 s). The X-ray diffraction pattern of ZnO film deposited on PET-ITO electrode showed that it has a polycrystalline structure with preferred orientations in the directions [0 0 2] and [1 0 3]. ZnO nanorods were synthesized on electrochemical seeded substrate in an aqueous solution containing zinc nitrate and hexamethylenetetramine. In order to increase the stability of PET-ITO electrode to electrochemical and chemical stresses during ZnO nanorods deposition the surface of the electrode was treated with a 17 wt% NH₄F aqueous solution. Electrochemical stability of PET-ITO electrode was evaluated in a solution containing nitrate ions and hexamethylenetetramine. ZnO nanorod/shell arrays were fabricated using eosin Y as nanostructuring agent. Photoluminescence spectra of ZnO nanorod and ZnO nanorod/shell arrays prepared on the surface of PET-ITO electrode were discussed comparatively. By employing the 1.5 μm-length ZnO nanorod/shell array covered with a Cu₂O film a photovoltaic device was fabricated on the PET-ITO substrate.     

Photoluminescence and thermoluminescence studies of Tb3+ doped ZnO nanorods

Here in, the synthesis of the terbium doped zinc oxide (ZnO:Tb³⁺) nanorods via room temperature chemical co-precipitation was explored and their structural, photoluminescence (PL) and thermoluminescence (TL) studies were investigated in detail. The present samples were found to have pure hexagonal wurtzite crystal structure. The as obtained samples were broadly composed of nanoflakes while the highly crystalline nanorods have been formed due to low temperature annealing of the as synthesized samples. The diameters of the nanoflakes are found to be in the range 50–60 nm whereas the nanorods have diameter 60–90 nm and length 700–900 nm. FTIR study shows ZnO stretching band at 475 cm^?1 showing improved crystal quality with annealing. The bands at 1545 and 1431 cm^?1 are attributed to asymmetric and symmetric CO stretching vibration modes. The diffuse reflectance spectra show band edge emission near 390 nm and a blue shift of the absorption edge with higher concentration of Tb doping. The PL spectra of the Tb³⁺-doped sample exhibited bright bluish green and green emissions at 490 nm (⁵D₄ → ⁷F₆) and 544 nm (⁵D₄ → ⁷F₅) respectively which is much more intense then the blue (450 nm), bluish green (472 nm) and broad green emission (532 nm) for the undoped sample. An efficient energy transfer process from ZnO host to Tb³⁺ is observed in PL emission and excitation spectra of Tb³⁺-doped ZnO ions. The doped sample exhibits a strong TL glow peak at 255 °C compared to the prominent glow peak at 190 °C for the undoped sample. The higher temperature peaks are found to obey first order kinetics whereas the lower temperature peaks obey 2nd order kinetics. The glow peak at 255 °C for the Tb³⁺ doped sample has an activation energy 0.98 eV and frequency factor 2.77 × 10⁸ s^?1.     

Nonlinear optical properties of the PbS nanorods synthesized via surfactant-assisted hydrolysis

PbS nanorods were synthesized by surfactant-assisted homogenous hydrolysis. The products were characterized by UV–vis spectrophotometer, X-ray powder diffraction (XRD) and transmission electron microscope (TEM). PbS nanorods were measured by the Z-scan technique to investigate the third-order nonlinear optical (NLO) properties. The result of the NLO measurements shows that the PbS nanorods have the third-order nonlinear optical properties of both NLO absorption and NLO refraction with self-focusing effects. The nonlinear absorption coefficient and refractive index of the PbS nanorods are 2.16 × 10^− 9 m/W and 3.52 × 10^− 16 m²/W respectively.     

Solvothermal synthesis of uniform hexagonal-phase ZnS nanorods using a single-source molecular precursor

Pure and uniform hexagonal-phase ZnS nanorods with quantum confinement effect were synthesized by solvothermal decomposition of an air-stable, easily obtained single-source molecular precursor (zinc diethyldithiocarbamate, Zn-(DDTC)₂) in hydrazine hydrate aqueous solutions at 150–200 °C, and characterized by powder X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM), selected area electron diffraction (SAED) and UV–vis absorption spectra. The possible formation mechanism of one-dimensional ZnS nanostructure in the present system was also briefly discussed.     

Synthesis,growth mechanism,photoluminescence and field emission properties of metal–semiconductor Zn–ZnO core–shell microcactuses

Metal–semiconductor Zn–ZnO core–shell microcactuses have been synthesized on Si substrate by simple thermal evaporation and condensation route using NH₃ as carrier gas at 600 °C under ambient pressure. Microcactuses with average size of 65–75 μm are composed of hollow microspheres with high density single crystalline ZnO rods. The structure, composition and morphology of the product were characterized by X-ray diffraction (XRD), energy dispersive X-ray spectroscopy (EDS), scanning electron microscope (SEM), transmission electron microscopy (TEM) and selected area electron diffraction (SAED). A vapor–liquid–solid (VLS) based growth mechanism was proposed for the formation of Zn–ZnO core–shell microcactuses. Room temperature photoluminescence (PL) investigations revealed a strong and broad blue emission band at 441 nm associated with a weak ultraviolet (UV) peak at 374 nm. This blue emission (BE) is different from usually reported green/yellow-green emission from Zn–ZnO or ZnO structures. The field emission (FE) measurements exhibited moderate values of turn-on and threshold fields compared with reported large field emissions for other materials. These studies indicate the promise of Zn–ZnO core–shell microcactuses for the applications in UV-blue light display and field emission microelectronic devices.     

La-doped ZnO nanoparticles: Simple solution-combusting preparation and applications in the wastewater treatment

La-doped ZnO nanoparticles have been successfully synthesized by a simple solution combustion method via employing a mixture of ethanol and ethyleneglycol (v/v = 60/40) as the solvent. Zinc acetate and oxygen gas in the atmosphere were used as zinc and oxygen sources, and La(NO₃)₃ as the doping reagent. The as-obtained product was characterized by means of powder X-ray diffraction, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectrometry and X-ray photoelectron spectroscopy. Experiments showed that La-doped ZnO nanoparticles exhibited the higher capacities for the removal of Pb²⁺ and Cu²⁺ ions in water resource than undoped ZnO nanoparticles.     

SnO2/α-Fe2O3 hierarchical nanostructure: Hydrothermal preparation and formation mechanism

In this paper, we reported a simple solution method to assemble SnO₂ nanorods hierarchically on the surface of α-Fe₂O₃ nanosheets using Fe₃O₄ nanosheets as precursor. The product was characterized by X-ray powder diffraction (XRD), transmission electron microscopy (TEM), high-resolution transmission electron microscopy (HRTEM) and scanning electron microscopy (SEM). Our experimental results show that the lattice mismatch at the interface of SnO₂ nanorods with α-Fe₂O₃ nanosheets played an important role in determining the growth direction of SnO₂ nanorods. The interface prefers to take the least lattice mismatch and thus the preferential growth direction of SnO₂ nanorods was along [1 0 1] direction. The result may have important impact on the understanding of the nucleation growth process in a heterogeneous system.     

Optical properties of petal-like aggregated nanocrystalline zinc oxide synthesized by laser ablation

The results of the investigations carried out on the third-order nonlinearity in zinc oxide (ZnO) nanocrystals (NCs) by Z-scan technique are included in this paper. ZnO NCs show negative nonlinearity and good nonlinear absorption behavior at 532 nm. The third-order optical susceptibility χ(3) increases with enlargement of NCs due to the size dependent enhancement of exciton oscillator strength.The synthesis of ZnO NCs was performed by laser ablation from a high-purity metallic target of Zn in distilled water medium. For the ablation process, a high frequency pulsed Nd:YAG laser was employed operating at 532 nm with 100 ns pulse duration. UV–vis absorption spectroscopy illustrated the enhancement of the size of ZnO NCs upon increasing the laser pulse energy applied in ablation process. Accordingly the corresponding optical band gap (E_g) decrease by increasing the size of NCs. X-ray diffraction (XRD) associated with transmission electron microscopy (TEM) was utilized to characterize the crystalline phase and also for determining the ZnO NCs morphology.     

A novel route to ZnO nanorods with small diameters of 20 nm

The ZnO nanorods with small diameters of 20 nm were prepared successfully by an easy “in situ consumed template” route. In the synthesis, Zn(Ac)₂ were used as Zn source and dodecanethiol (DT) was used as coordinated agents in ethanol solvent. The samples were characterized detailed by XRD, TEM and IR techniques. The results indicated that the ZnO rods were uniform in diameters with good crystallinity. Time-dependent experiments indicated that the ZnO rods are grown within the Zn–DT complex (a complex composed of Zn and DT) that was formed at the beginning of the reaction. With prolonging the reaction time, the Zn–DT “template” was gradually in situ consumed and transformed into ZnO, and finally, the ZnO nanorods with diameters of 20 nm were obtained. The method here provides the new route for ZnO nanorods with small diameters.     

In situ fabrication and characterization of cobalt ferrite nanorods/graphene composites

Cobalt ferrite nanorods/graphene composites were prepared by a one-step hydrothermal process using NaHSO₃ as the reducing agent and 1-propyl-3-hexadecylimidazolium bromide as the structure growth-directing template. The reduction of graphene oxide and the in situ formation of cobalt ferrite nanorods were accomplished in a one-step reaction. The structure and morphology of as-obtained composites were characterized by field emission scanning electron microscopy, transmission electron microscopy, high resolution transmission electron microscopy, atomic force microscope, X-ray diffractometer, Fourier transform infrared spectra, X-ray photoelectron spectroscopy and Raman spectroscopy. Uniform rod-like cobalt ferrites with diameters of about 100 nm and length of about 800 nm were homogeneously distributed on the graphene sheets. The hybrid materials showed a saturation magnetization of 42.5 emu/g and coercivity of 495.1 Oe at room temperature. The electromagnetic parameters were measured using a vector network analyzer. A minimum reflection loss (RL) of − 25.8 dB was observed at 16.1 GHz for the cobalt ferrite nanorods/graphene composites with a thickness of 2 mm, and the effective absorption frequency (RL < − 10 dB) ranged from 13.5 to 18.0 GHz. The composites exhibited better absorbing properties than the cobalt ferrite nanorods and the mixture of cobalt ferrite nanorods and graphene.