共查询到20条相似文献,搜索用时 125 毫秒
1.
2.
研究了铝件在阳极氧化的预处理、氧化、染色环节产生"白斑"、"花斑"的原因,认为机械加工过程中乳化油腐蚀、阳极氧化过程中零件夹持状态不合理、零件染色时形成的封闭气囊都会产生"白斑"或"花斑",但形态不同;根据不同环节产生"白斑"的原因,提出了预防和消除"白斑"的措施。 相似文献
3.
本文以生产实践为依据,对压洗聚酰胺6冬季突然出现的大量白斑疵点丝(约占80%)进行了分析,在众多影响白斑丝的因素中,找出关键问题是压洗过程中使用的助剂大偏磷酸钠和纺丝油剂中的抗静电剂磷酸酯钾盐,进而及时解决了生产中的白斑丝,提高了产品的优级品率。 相似文献
4.
5.
6.
简要介绍了目前中国主要的热—电—煤气“三联产”技术,并对热—电—煤气“三联产”技术应用过程中应解决的几个关键问题进行了分析,妥善解决这些问题才能在煤的综合利用中推广热—电—煤气“三联产”这种全新的能源利用模式。 相似文献
7.
浅析水性压敏胶保护膜"塔形"现象 总被引:1,自引:0,他引:1
对水性压敏胶应用于表面保护膜过程中出现的“塔形”现象进行了探讨,具体分析了水性压敏胶、基材、固化剂、环境温度,以及保护膜生产工艺对“塔形”现象的影响,并提出了相应的解决办法。 相似文献
8.
本文以生产实践为依据,对压洗聚酰胺6冬季突然出现的大量斑疵点丝(约占80%)进行了分析,在众多影响白斑丝的因素中,找出关键问题是压洗过程中使用的助剂六偏磷酸钠和纺丝油剂中的抗静电剂磷酸酯钾盐,进而及时解决了生产中的白斑丝,提高了产品的优级品率。 相似文献
9.
10.
11.
12.
In this work, we present a novel process to produce plasticized PVC articles. Plasticized PVC dispersion resin (dry blend) was extruded and poured into a hot mold. The mold was transferred to a rotomolding machine, where the final geometry was obtained. Formulations using commercial PVC suspension resin and three different types of plasticizers were prepared under different processing conditions. The physical appearance of the articles and the tensile properties of the materials were evaluated. 相似文献
13.
This study discusses the influence of molecular weight, melt temperature, mold temperature, and aging on the impact characteristics of molded PVC. Tensile impact (uniaxial), instrumented drop‐dart impact (biaxial), and Izod impact (triaxial) methods were utilized to assess the impact properties of the material under investigation. It was found that the impact properties were affected by aging more than by the changes in the melt temperature or the mold temperature. Additionally, the molecular weight played a significant role in influencing the impact properties of PVC. 相似文献
14.
硬质聚氯乙烯异型材挤出成型模具的设计 总被引:2,自引:1,他引:1
本文通过对硬质聚氯乙烯异型材挤出成型模具的设计,较具体地论述了硬质聚氯乙烯异型材挤出成型模具的设计、计算、试模及修模等过程,提出了自己的见解。 相似文献
15.
16.
17.
对悬浮法聚氯乙烯树脂在加工中产生“鱼眼”的原因进行了较全面分析 ,结合生产实际情况 ,综合提出了聚氯乙烯生产中“鱼眼”的防范措施及对策。 相似文献
18.
19.
对PVC与聚氨酯发泡模具及工艺作一概述,结合工艺对模具的设计、举升机构计算、气缸支点、举升点的选择,以及模具的稳定性作了具体介绍,使模具设计走向常规化、合理化,对提高产品质量和工艺的发展有着重要作用。 相似文献
20.
研究了涂布机运行速度、烘箱温度、上胶量对PVC带胶膜性能的影响;还研究了PVC带胶膜与PVC白卡基层压过程中层压温度对产品性能的影响。结果表明,PVC带胶膜最佳生产工艺为:运行速度25 m/min,烘箱温度55℃,上胶量4.5 g/m2;PVC带胶膜最佳层压工艺为:在层压压力10 MPa、层压时间30 min的条件下,层压温度为120℃。 相似文献