镉和汞两种重金属离子对四角蛤蜊的急性毒性

采用毒理学实验方法,比较研究了Cd~(2+)和Hg~(2+)对四角蛤蜊(Mactra veneriformis Reeve)急性毒性效应的差异,以期为进一步评价重金属离子对四角蛤蜊的毒性效应和作用机理等提供理论依据.死亡概率单位和实验液浓度对数的线性回归分析表明,Cd~(2+)对四角蛤蜊在24、48和96 h的半致死浓度(LC_(50))分别为15.961、5.149和2.383 mg/L,Hg~(2+)的LC_(50)分别为3.714、0.607和0.207 mg/L;Cd~(2+) 和Hg~(2+) 对四角蛤蜊的安全质量浓度分别为0.023 8 mg/L和0.002 1 mg/L,分别是我国渔业水质标准(GB11607-89)限定量的4.76倍和4.02倍.     

Cd2+和Pb2+单一与复合污染对脊尾白虾的急性毒性效应研究

近年来,中国近岸重金属污染问题日趋严重。作者通过研究重金属Cd~(2+)和Pb~(2+)对脊尾白虾(Palaemon carincauda)的单一及复合急性毒性效应,为其养殖水质管理提供科学依据。本研究采用半静态急性毒性测定方法,开展了不同浓度Cd~(2+)和Pb~(2+)对脊尾白虾96 h内的急性毒性试验。研究结果表明:在单一污染物暴露下,Cd~(2+)对脊尾白虾24、48、72、96 h的半数致死质量浓度(LC50)分别为138.699、33.110、9.719、3.650 mg/L,Pb~(2+)对脊尾白虾48、72、96 h的LC50分别为254.541、62.750、29.074 mg/L;Cd~(2+)、Pb~(2+)对脊尾白虾96 h的安全质量浓度分别为0.365和2.907 mg/L;在等浓度配比(1︰1)暴露下,Cd~(2+)和Pb~(2+)复合污染对目标生物在48、72、96 h暴露期间的毒性相加指数(additive index,AI)分别为0.155、0.068、0.258。综上所述,Cd~(2+)对脊尾白虾的毒性较Pb~(2+)更强,Cd~(2+)和Pb~(2+)对脊尾白虾的复合污染均表现出较明显的协同作用。     

Cu2+对青蛤的胁迫效应

为研究青蛤(Cyclina sinensis)对重金属Cu~(2+)的蓄积作用及免疫机能的影响,开展了Cu~(2+)对青蛤的急性毒性实验,观察青蛤在96 h Cu~(2+)半致死浓度和安全浓度胁迫下,不同组织的蓄积趋势,及血淋巴液中SOD、CAT和ACP活性的变化。结果显示:Cu~(2+)的半致死浓度为0.807 mg/L,安全浓度为0.00807 mg/L。鳃和内脏团组织中蓄积的Cu~(2+)浓度与处理时间呈正相关;在半致死和安全浓度胁迫下,鳃组织中Cu~(2+)蓄积速度均快于内脏团;在半致死浓度胁迫下血淋巴液中SOD、CAT和ACP活性呈现先诱导再抑制的趋势,安全浓度下无明显变化,但均高于对照组水平。     

Cd2+和Cu2+对泥蚶的急性毒性和联合毒性试验

为了解重金属Cd2+和Cu2+对泥蚶的毒害程度和泥蚶对重金属Cd2+和Cu2+的解毒能力,用毒理学实验方法研究了Cd2+和Cu2+对泥蚶(Tegillarca granosa)的急性毒性和联合毒性效应。结果表明:Cd2+、Cu2+对泥蚶的96 h半致死质量浓度分别为6.189、0.460 mg/L;安全质量浓度分别为0.062、0.005 mg/L;相对毒性Cu2+Cd2+。在1︰1毒性单位的联合作用下,Cd2+和Cu2+对泥蚶96 h的半致死质量浓度分别为1.984、0.147 mg/L;安全质量浓度分别为0.020、0.001 mg/L。2种重金属离子的联合毒性大于任一重金属离子的毒性,联合毒性表现为协同作用。     

甲醛对虎斑乌贼受精卵和幼体的毒性试验

采用静水试验法研究了甲醛对虎斑乌贼胚胎和幼体的毒性作用.试验结果表明:甲醛对虎斑乌贼胚胎的24h半致死浓度(LC50)、48h半致死浓度和安全浓度分别为12.38、10.28和2.127mg/L;甲醛对虎斑乌贼幼体的24h半致死浓度(LC50)、48h半致死浓度和安全浓度分别为2.074、0.796和0.035mg/L.虎斑乌贼幼体期较胚胎期对甲醛更为敏感.     

三种重金属离子对卤虫的急性毒性研究（英文）

以卤虫无节幼体(36h)和成虫(16d)为例,在温度为15±3℃、盐度为30的条件下,通过单因子静态急性毒性试验方法,分别研究了Cu~(2+)、Mn~(2+)和Zn~(2+)对卤虫的无节幼体和成虫的单一毒性效应;在此基础上,以卤虫卤虫无节幼体(36h)为例,在相同试验条件下,通过等毒性溶液法,研究了Cu~(2+)、Mn~(2+)和Zn~(2+)对卤虫的联合毒性效应。试验结果表明:卤虫无节幼体对三种金属离子的耐受能力均高于成虫,Cu~(2+)﹑Mn~(2+)和Zn~(2+)的48h LC_(50)分别是4.0、27.19和115.95 mg/L,而成虫Cu~(2+)﹑Mn~(2+)和Zn~(2+)的48h LC_(50)仅为1.31、6.86和34.23 mg/L;且对两个时期的卤虫,三种金属离子毒性由强至弱均为Cu~(2+) Mn~(2+)Zn~(2+);三种重金属对卤虫无节幼体和成虫的安全浓度(SC)分别是0.4、2.72、11.6、0.13、0.69和3.42 mg/L。联合毒性试验结果表明Cu-Mn、Cu-Zn和Mn-Zn均对卤虫无节幼体表现为拮抗作用。     

两种水温条件下镉对菲律宾蛤仔的急性毒性

分别在两种不同水温条件下,采用静水试验法,进行了Cd2+对菲律宾蛤仔的急性毒性实验,以概率单位法求得Cd2+对菲律宾蛤仔的半致死质量浓度(LC50)。结果表明,在12±0.5℃水温下,Cd2+对菲律宾蛤仔的24h、48h、72h、96h的LC50分别为95.05mg/L、46.87mg/L、32.65mg/L和11.31mg/L;在17±0.5℃水温下,Cd2+对菲律宾蛤仔的24h、48h、72h、96h的LC50分别为70.08mg/L、35.28mg/L、22.36mg/L和14.38mg/L。水温12℃和17℃时,Cd2+对菲律宾蛤仔的96h最大容许质量浓度分别为0.113mg/L和0.144mg/L。Cd2+对菲律宾蛤仔属于高度毒性物质,并且随着水温的升高,Cd2+的毒性作用增强。     

4种重金属离子对彩虹明樱蛤(Moerella iridescens)的急性致毒效应

以彩虹明樱蛤养殖壳高优势组(平均壳高为17.35±1.01mm)为实验动物,进行4种重金属离子Hg2 、Cr6 、Cu2 、Zn2 对彩虹明樱蛤的急性毒性和加和等毒性强度联合毒性试验。结果表明,彩虹明樱蛤对重金属的耐药性均随实验时间延长而缓慢降低,4种重金属离子毒性大小依次为Cu2 、Hg2 、Zn2 、Cr6 ,其对彩虹明樱蛤96h的半致死质量浓度分别为0.0554mg/L、0.1099mg/L、2.2605mg/L、19.6277mg/L;Hg2 、Cr6 、Cu2 、Zn2 离子两两组合在加和等毒性强度下对彩虹明樱蛤96h联合急性毒性所呈现的致毒特征与离子间毒性强度匹配情形密切相关。     

鱼藤酮对花鲈、矛尾虾虎鱼的急性毒性研究

采用静水实验方法和改良寇式法计算,以鲈鱼Lateolabrax japonicas、矛尾虾虎鱼Chaeturighthys stigmatia Richardson为实验材料开展了鱼藤酮的急性毒性实验。结果表明:鱼藤酮分别处理6h、9h、18h、21h、24h时鲈鱼的半致死浓度(LC_(50))分别为18.40μg/L、17.83μg/L、14.55μg/L、14.32μg/L、13.72μg/L,鲈鱼半致死浓度的95%置信区间分别为17.29~19.58μg/L、17.22~18.46μg/L、13.92~15.10μg/L、13.69~14.97μg/L、13.18~14.27μg/L;鱼藤酮分别处理24h、48h、72h时矛尾虾虎鱼的半致死浓度(LC_(50))分别为45.35μg/L、26.59μg/L、16.96μg/L,矛尾虾虎鱼半致死浓度的95%置信区间分别为42.01~48.85μg/L、24.78~28.54μg/L和16.09~17.88μg/L。2种鱼类的半致死浓度都非常低,而矛尾虾虎鱼对鱼藤酮的耐受性更强一些,鱼药毒性等级划分显示鱼藤酮对两种鱼类均属于剧毒性物质。     

吡啶硫酮类防污剂对华美盘管虫早期不同发育阶段的毒性效应研究

以中国南海常见的多毛类——华美盘管虫(Hydroides elegans)作为受试生物,分别研究了吡啶硫酮铜和吡啶硫酮锌对早期不同发育阶段的华美盘管虫的急性毒理效应。发现暴露于吡啶硫酮铜的华美盘管虫精子和卵子的受精半数抑制浓度(IC50)分别为19.49μg/L和88.44μg/L,担轮幼虫24 h半数致死浓度(24h-LC50)和48 h半数致死浓度(48h-LC50)分别为7.35μg/L和5.00μg/L,后担轮幼虫24h-LC50和48h-LC50分别为8.57μg/L和5.87μg/L;暴露于吡啶硫酮锌的华美盘管虫精子和卵子的受精IC50分别为36.74μg/L和159.59μg/L,担轮幼虫24 h-LC50和48 h-LC50分别为8.57μg/L和6.67μg/L,后担轮幼虫24 h-LC50和48 h-LC50分别为12.03μg/L和8.07μg/L。表明华美盘管虫早期发育的不同阶段对吡啶硫酮铜和吡啶硫酮锌的敏感性表现出一定差异,与配子受精率和后担轮幼虫的毒性反应相比,担轮幼虫对吡啶硫酮铜和吡啶硫酮锌的毒性表现出较高的敏感性;而且,对吡啶硫酮铜的敏感性普遍高于吡啶硫酮锌。     

Microbial Biomass and Organic Nutrients in the Deep-Sea Sediments of the Central Indian Ocean Basin

In order to assess the impact of deep-sea mining on the in situ benthic life, we measured the microbial standing stock and concentration of organic nutrients in the deep-sea sediments of the Central Indian Ocean Basin in the Indian pioneer area. Sediments were collected using box core and grab samples during September 1996. The total bacterial numbers ranged from 10 10 -10 11 cells per g -1 dry weight sediment. There was a marginal decrease in the number of bacteria from surface to 30 cm depth, though the subsurface section registered a higher number than did the surface. The highest numbers were encountered at depths of 4-8 cm. The retrievable number of bacteria were two orders less in comparison with the direct total counts of bacteria. An almost homogeneous distribution of bacteria, total organic carbon, living biomass, and lipids throughout the depth of cores indicates active microbial and benthic processes in the deep sea sediments. On the other hand, a uniform distribution of total counts of bacteria, carbohydrates, and total organic carbon in all the cores indicates their stable nature and suggests that they can serve as useful parameters for long-term monitoring of the area after the benthic disturbance. Further studies on temporal variability in this region would not only verify the observed norms of distribution of these variables but would also help to understand restabilization processes after the simulated benthic disturbance.     

Assessing the Validity of Seismo-Acoustic Predictor Equations for Obtaining Seabed and Sub-Surface Sediment Physical Properties

The interdependence between the seismo-acoustic properties of a marine sediment and its geotechnical/physical parameters has been known for many years, and it has been postulated that this should allow the extraction of geotechnical information from seismic data. Though in the literature many correlations have been published for the surficial layer, there is a lack of information for greater sediment depths. In this article, a desktop study on a synthetic seafloor model illustrates how the application of published near-surface prediction equations to subsurface sediments (up to several tens of meters burial depth) can lead to spurious predictions. To test this further, acoustic and geotechnical properties were measured on a number of sediment core samples, some of which were subjected to loading in acoustically-equipped consolidation cells (oedometers) to simulate greater burial depth conditions. For low effective pressures (representing small burial depths extending to around 10 meters subsurface), the general applicability of established relationships was confirmed: the prediction of porosity, bulk density, and mean grain size from acoustic velocity and impedance appears generally possible for the investigated sedimentary environments. As effective pressure increases through, the observed relationships deviate more and more from the established ones for the near-surface area. For the samples tested in this study, in some instances increasing pressure even resulted in decreasing velocities. There are several possible explanations for this abnormal behavior, including the presence of gas, overconsolidation, or bimodal grain size distribution. The results indicate that an appropriate depth correction must be introduced into the published prediction equations in order to obtain reliable estimates of physical sediment properties for greater subsurface depths.     

A Review of Some Environmental Issues Affecting Marine Mining

This article reviews information recently available from existing marine and coastal mining for responses to environmental issues affecting marine mining at different depths. It is particularly but not exclusively concerned with those issues affecting seabed biodiversity impact and recovery. Much information has been gathered in the past 10 years from shallow mining operations for construction aggregate, diamonds, and gold, from coastal mines discharging tailings to shallow and deep water, and from experimental deep mining tests. The responses to issues identified are summarized in a series of eight tables intended to facilitate site-specific consideration. Since impacts can spread widely in the surface mixing layer SML, and can affect the biologically productive euphotic zone, the main issues considered arise from the depth of mining relative to the SML of the sea. Where mining is below the SML, the issue is whether it is environmentally better to bring the extraction products to the surface vessel for processing (and waste discharge), or to process the extraction products as much as possible on the seabed. Responses to the issues need to be sitespecific, and dependent on adequate preoperational environmental impact and recovery prediction. For deep tailings disposal from a surface vessel, there are four important environmental unknowns: (1) the possible growth of "marine snow" (bacterial flocs) utilizing the enormous quantities of fine tailings particles (hundreds or thousands of metric tons per day) as nuclei for growth, (2) the possibility that local keystone plankton and nekton species may migrate diurnally down to and beyond the depth of deep discharge and hence be subjected to tailings impact at depth, (3) the burrow-up capability of deep benthos and their ability to survive high rates of tailings deposition, and (4) the pattern and rate of dispersion of a tailings density current through the deep water column from discharge point to seabed. Actions to obtain relevant information in general and site-specifically are suggested.     

Increased Particle Fluxes at the INDEX Site Attributable to Simulated Benthic Disturbance

Particle fluxes were measured 7 m above the sea bottom during the predisturbance, disturbance, and postdisturbance periods by using time series sediment traps attached to seven deep-sea moorings deployed in the INDEX experiment site in the Central Indian Basin. The predisturbance particle fluxes varied between 22.3 to 55.1 mg m -2 day -1 . Increased and variable particle fluxes were recorded by the sediment traps during the disturbance period. The increase observed was 0.5 to 4 times more than the background predisturbance fluxes. The increases in particle fluxes (~4 times) recorded by the sediment trap located in the southwestern direction (DMS-1) were the greatest, which could be the result of preferential movement of resuspended particles generated during the deep-sea benthic disturbance along the general current direction prevailing in this area during the experimental period. Also, the traps located closer to the disturbance area recorded greater fluxes than did the traps far away, across the Deep Sea Sediment Resuspension System path. This variability in recorded particle fluxes by the traps around the disturbance area clearly indicates that physical characteristics such as grain size and density of the resuspended particles produced during the disturbance had an important effect on particle movement. The postdisturbance measurements during ~5 days showed a reduction in particle fluxes of ~50%, indicating rapid particle settlement.     

海上大直径钢管桩打桩过程中桩周土强度弱化研究

海上大直径钢管桩打桩过程中,桩周土体受到强烈扰动而发生强度弱化,掌握桩周土体强度弱化规律对于准确预测打桩过程、保证工程安全具有重要意义。为研究土体强度弱化规律,开展了环剪试验模拟打桩对桩周土体的扰动,测试土体强度随剪切速率的变化规律,建立了描述土体强度弱化规律的拟合公式,引入到打桩分析软件中。研究结果表明：土体的强度折减程度不仅与土体本身的性质有关还受到土体的埋深和剪切速率的影响,埋深越深土体强度折减程度越低,剪切速率越高土体强度折减越高,在打桩分析中可采用这里推荐的线性折减方法来模拟不同深度处土体强度的折减规律。     

Geoacoustic Inversion via Genetic Algorithm and Its Application to Manganese Sediment Identification

An acoustic inversion method using a wide-band signal and two near field receivers is proposed and applied to multiple layered seabed models including a manganese sediment. The inversion problem can be formulated into a probabilistic model comprised of signals, a forward model, and additive noise. The forward model simulates wide-band signals, such as chirp signals, and is chosen to be the source-waveletconvolution plane wave modeling method. The wavelet matching technique, using weighted least-squares fitting, estimates the sediment sound-speed and thickness on which determination of the possible numerical ranges for a priori uniform distribution is based. The genetic algorithm is applied to a global optimization problem to find a maximum a posteriori solution for determined a priori search space. Here the object function is defined by an L 2 norm of the difference between measured and modeled signals. Not only the marginal pdf but also its statistics are calculated by numerical evaluation of integrals using the samples selected during importance sampling process of the genetic algorithm.     

Determination of In Situ Sediment Shear Strength from Advanced Piston Corer Pullout Forces

The advanced piston corer (APC) has been used by the Ocean Drilling Program since 1985 for recovering soft sediments from the ocean floor. The pullout force measured on extracting the core barrel from the sediment is shown to correlate with the average shear strength of the sediment core measured in the ship's laboratory. A simple rule of thumb is derived relating the shear strength of the sediment to the pullout force. Multiple APC holes at individual sites allow the consistency of the pullout measurements to be assessed. The effects of different operational procedures during APC coring are also explored. Although generally applicable, the correlation between pullout force and laboratory measurements of shear strength breaks down for some APC holes, possibly because of the disturbance of some sediment types during the APC coring process. A better understanding of the physical process of APC coring, and its effect on the properties of the sediment both inside and immediately outside the core barrel, would indicate what confidence can be put on the measurement of pullout force as a way of evaluating the in situ shear strength of deep sea sediments.     

Interannual Sea Level Variations and Annual Tides in the Northwestern Pacific

Specific properties of the interannual sea level variations and annual tides in the Northwestern Pacific were studied. Several tide stations were monitored. The monthly mean sea level for the year of 1995 was analyzed at each tide station. A seismic event in 1995, some tectonic activity around the subject area, and the Kuroshio (the oceanic western boundary current) may possibly contaminate results which would have occurred from the astronomical annual tide alone.     

《Acta Oceanologica Sinica》Vol. 33(2014) contents

<正>~~