La1.3Sr1.7Mn2O7/SrTiO3-Nb异质结的整流和光伏特性

采用脉冲激光沉积法在SrTiO₃:0.7%Nb(100)单晶衬底上生长了La_1.3Sr_1.7Mn₂O₇(LSMO)薄膜, 并 研究了LSMO/SrTiO₃-Nb异质结的输运性质和光伏效应. 研究发现, 异质结具有良好的整流特征和明显的光生伏特效应. 在532 nm激光辐照下, 光生电压随温度升高先增大后减小, 并且在150 K达到最大值400 mV, 此温度点与LSMO薄膜发生金属-绝缘体转变的温度一致, 这表明异质结的光生伏特效应受LSMO薄膜内部的输运特征调控. 进一步, 从光生电压随时间的变化曲线中分析发现, 上升沿符合一阶指数函数, 这与载流子的迁移过程相关; 而下降沿符合二阶指数函数, 这与结两侧载流子的外部回路中和以及材料内部的电子-空穴湮灭有关. 值得注意的是, 上升沿和下降沿的时间常数均随着温度先增大后减小, 且最大值均出现在LSMO薄膜的金属-绝缘转变温度.     

Electronic transport properties of the charge ordered manganite-based heterojunction

The charge ordered Bi_0.4Ca_0.4Sr_0.2MnO₃ (BCSMO) film has been grown on (011) SrTiO₃: Nb (STON) (0.05 wt%) substrate. The charge ordering (CO) transition is realized at ～336 K. The BCSMO/STON heterojunction shows excellent rectifying behavior. Through the capacitance measure of the junction, it is found that the built-in potential of the heterojunction is affected by the CO transition. A upward shift of the built-in potential of the junction appears around the CO transition temperature, which is ascribed to the change of the Fermi level in BCSMO film.     

Effect of magnetic film thickness on rectifying properties of La0.8Sr0.2MnO3/TiO2 heterostructures

The La_0.8Sr_0.2MnO₃ (LSMO)/ TiO₂ heterostructures with different thicknesses of the LSMO films were successfully synthesized using the RF magnetron sputtering technique. Excellent rectifying characteristics are presented in all heterostructures in a wide temperature range. The differences of the diffusive potentials for three heterojunctions are very little at 300 K. The samples exhibit a high resistance that plays an important role on their rectifying properties. The diffusive potential decreases with increasing temperature. The result is attributed to both the reduction of the thickness of the deletion layer due to the thermal diffusion and the modulation of the interfacial electronic structure of the heterostructures. The metal-insulator (M-I) transition is observed clearly from the single LSMO layers and the LSMO/ TiO₂ p-n heterojunctions.     

Off-axis electron holography of manganite-based heterojunctions:Interface potential and charge distribution

The interfacial electrical potentials and charge distributions of two manganite-based heterojunctions, i.e.,La_(0.67)Ca_(0.33)MnO_3/SrTiO_3:0.05 wt% Nb(LCMO/STON) and La_(0.67)Ca_(0.33)MnO_3/LaMnO_3/SrTiO_3:0.05 wt% Nb(simplified as LCMO/LMO/STON), are studied by means of off-axis electron holography in a transmission electron microscope.The influences of buffer layer on the microstructure and magnetic properties of the LCMO films are explored. The results show that when a buffer layer of LaMnO_3 is introduced, the tensile strain between the STON substrate and LCMO film reduces, misfit dislocation density decreases near the interfaces of the heterojunctions, and a positive magnetoresistance is observed. For the LCMO/STON junction, positive and negative charges accumulate near the interface between the substrate and the film. For the LCMO/LMO/STON junction, a complex charge distribution takes place across the interface, where notable negative charges accumulate. The difference between the charge distributions near the interface may shed light on the observed generation of positive magnetoresistance in the junction with a buffer layer.     

The structure and magnetotransport properties of La2/3Sr1/3MnO3/Ba(La)TiO3 composites

The effect of Ba(La)TiO₃ doping on the structure and magnetotransport properties of La_2/3Sr_1/3MnO₃(LSMO)/xBa(La)TiO₃ (x=0.0, 1.0, 5.0 mol%) have been investigated. The X-ray diffraction patterns and microstructural analysis show that BaTiO₃ and LSMO phases exist independently in BaTiO₃-doped composites. The metal-insulator transition temperature (T_MI) decreases whereas the maximum resistivity increases very quickly by the increase of BaTiO₃ doping level. The partial substitution of Ba by La(0.35 mol%) results in a decrease in resistivity of LSMO/xBa(La)TiO₃ composites. Magnetoresistance of BaTiO₃-doped composites decreases monotonously in the temperature range 200-400 K in a magnetic field of 5 T, which is completely different from that of LSMO compound. The value of MR decreases at low field (H<1 T) and increases at high fields (H>1 T) with increasing the BaTiO₃ doping level at low temperatures below 280 K. These investigations reveal that the magnetotransport properties of LSMO/xBa(La)TiO₃ composites are dominated by spin-dependent scattering and tunneling effect at the LSMO/BaTiO₃/LSMO magnetic tunnel junction.     

La<Subscript>0.7</Subscript>Sr<Subscript>0.3</Subscript>MnO<Subscript>3</Subscript> thin films on SrTiO<Subscript>3</Subscript> and CaTiO<Subscript>3</Subscript> buffered Si substrates: structural,static, and dynamic magnetic properties

Nearly 50-nm thick La_0.7Sr_0.3MnO₃ (LSMO) films were grown on Si substrates using molecular beam epitaxy on (001) Si substrates over-layered by a 20 nm thick SrTiO₃ (STO) or by a 20 nm thick CaTiO₃ (CTO) film. In addition, a reference LSMO film was directly deposited on a (001) STO substrate by pulsed laser deposition. For all the samples, X-ray diffraction revealed an excellent epitaxy of the LSMO film and small mosaicity around (001), with in-plane [100] and [010] cubic axes. The LSMO/CTO films are in-plane compressed while the LSMO/STO ones are in-plane extended. The temperature dependence of their static magnetic properties was studied using a SQUID, showing a Curie temperature overpassing 315 K for all the samples. Hysteresis loops performed at room temperature (294 K) with the help of a vibrating sample magnetometer (VSM) are also discussed. At 294 K Micro-strip ferromagnetic resonance (MS-FMR) was used to investigate the dynamic magnetic properties. It allows concluding to a strong anisotropy perpendicular to the films and to a weak fourfold in-plane anisotropy with easy axes along the [110] and [1[`1]0 1\bar{1}0 ] directions. Their values strongly depend on the studied sample and are presumably related to the strains suffered by the films.     

BaTiO_3/La_(0.67)Sr_(0.33)MnO_(3-δ)复合薄膜的磁致电极化和磁介电特性研究

采用脉冲激光沉积法制备了BaTiO_3(BTO)与缺氧的铁磁绝缘态La_(0.67)Sr_(0.33)MnO_(3-δ)(LSMO)构成的磁电复合薄膜,研究了20—300K温度区间内磁场对电极化特性和介电特性的影响.研究发现,施加磁场使得电滞回线的剩余极化强度和矫顽场均增大,其变化率峰值分别为111.9%和89.6%,峰值温度分别为40K和60K.异质结具有显著的磁介电效应,在测量温度区间内,磁场使得介电常数增大,介电损耗减小.在0.8T场强下,介电常数的最大磁致变化率出现在60K,达到了300%,而介电损耗也在此温度实现了最大变化,减小为零场时的50.9%.该磁电复合薄膜的磁致电极化和磁介电特性的极值均出现在LSMO层的磁电阻峰值温度附近,这说明磁场对电滞回线和介电参数的调制应该源自电荷相关的耦合作用.其可能的机理是磁场使得锰氧化物中的Mn离子局域磁矩趋于有序排列,并通过自旋-轨道耦合以及界面效应间接影响了BTO的电极化特性.研究结果对于多铁器件的开发和应用具有重要意义.     

La_(1-x)Sr_xMnO_3/TiO_2(x=0.2,0.15,0.04)异质pn结的整流特性

采用磁控溅射法制备的La1-xSrxMnO3(LSMO)/TiO2异质pn结表现出很好的整流特性.室温电流电压特性曲线显示随着Sr掺杂的增加,扩散电压增大,这可能由于Sr掺杂的增加导致载流子浓度增大所致.电流电压变温特性曲线显示随着测量温度的降低,扩散电压增大,这可能由于随着测量温度的变化导致界面电子结构的变化所致.值得提出的,异质pn结电阻随温度变化曲线表现出单层LSMO的金属绝缘相变特性,并且在低测量温度时表现出随着测量温度的降低结电阻增大,这可能是由于宽带隙的TiO2的引入导致.     

Raman光谱研究厚度对La0.9Sr0.1MnO3/Si薄膜结构的影响

通过溶胶-凝胶旋涂方法结合后退火工艺在Si（100）上制备了不同厚度的La_0.9Sr_0.1MnO₃（LSMO）薄膜,利用X射线衍射（XRD）和共焦显微拉曼散射（Raman）研究了LSMO/Si（100）薄膜的微结构．研究结果表明90 nm厚的LSMO薄膜具有正交相结构,当厚度大于150 nm时,薄膜具有菱方相结构. 150 nm厚的薄膜的Raman图谱中,490 cm^-1和602 cm^-1正交结构 关键词： 薄膜 1-xSr_xMnO₃')" href="#">La_1-xSr_xMnO₃ 共焦显微拉曼 微结构     

Magnetotransport properties of La0.67Ca0.33MnO3//La0.67Sr0.33MnO3 bilayers

The perovskite bilayers La0.67Ca0.33MnO3 （LCMO） （100 nm） / La0.67Sr0.33MnO3（LSMO） （100 nm） and LSMO （100 nm） / LCMO （100 nm） are fabricated by a facing-target sputtering technique. Their transport and magnetic properties are investigated. It is found that the transport properties between them are different obviously due to distinguishable structures, and the different lattice strains in both films result in the difference of metal-to-insulator transition. Only single-step magnetization loop appears in our bilayers from 5K to 320K, and the coercive force of LSMO/LCMO varies irregularly with a minimum ～ 2387A/m which is lower than that of LCMO and LSMO single layer films. The behaviour is explained by some magnetic coupling.     

Electric transport character in the La0.7Ce0.3MnO3-SrTiO3-Nb heterojunction

The electric transport character in heterojunction composed of a La_0.7Ce_0.3MnO₃ film and a 0.5 wt% Nb-doped SrTiO₃ substrate (LCEM/STON) is investigated. It is found that the energy band gap (E_g) between LCEM and STON decreases with increasing temperatures. The most striking observation of present work is that there exists a variation of reverse transport mechanism from ionization to tunneling at the temperature of 175 K. We attribute the temperature dependence of reverse transport mechanism to co-work of E_g and the ferromagnetic (FM) insulting phase in the heterojunction. These results are helpful in configuring artificial devices using manganites.     

Abnormal current-voltage characteristics and metal-insulator transition of amorphous carbon film/silicon heterojunction

The amorphous carbon film/n-Si (a-C/n-Si) heterojunctions have been fabricated by direct current magnetron sputtering at room temperature, and their current-voltage characteristics have been investigated. The results show that these junctions have good rectifying properties in the temperature range 80-300 K. The interesting result is that the current-voltage curve changes dramatically with increasing applied voltage and temperature. For the forward bias voltages, the junction shows Ohmic mechanism characteristic in the temperature range 240-300 K. However, the conduction mechanism changes from Ohmic for the low bias voltages to space charge limited current for the high bias voltages in the temperature range 80-240 K. While for the reverse bias voltages, it changes from Schottky emission to breakdown with increasing voltage. Another important phenomenon is that the temperature dependence of the junction resistance shows a metal-insulator transition, whose transition temperature can be controlled by the bias voltage.     

不同生长方向的La0.7Sr0.3MnO3薄膜结构及性能研究

利用磁控溅射方法,在(100),(110)和(111)LaAlO3(LAO)衬底上制备得到了不同生长方向的La0.7Sr0.3MnO3(LSMO)薄膜并对其结构及磁电学性能进行了系统研究.结果表明:LSMO薄膜完全按LAO衬底取向生长;(111)生长方向的薄膜由于晶格畸变程度最小,磁畴方向能较好的保持一致性,从而具有最大的磁饱和强度值;高的磁有序度减弱了巡游电子eg的自旋无序相关散射,有效降低了电阻.但外加磁场后电阻变化不明显,最大磁电阻值只有5.1%.     

Magnetic Anisotropy Induced by Orbital Occupation States in La_(0.67)Sr_(0.33)MnO_3 Films

Interface engineering is an effective and feasible method to regulate the magnetic anisotropy of films by altering interfacial states between films.Using the technique of pulsed laser deposition,we prepared La_(0.67)Sr_(0.33)MnO_3(LSMO) and La_(0.67)Sr_(0.33)MnO_3/SrCoO_(2.5)(LSMO/SCO) films on(110)-oriented La_(0.3)Sr_(0.7)Al_(0.65)Ta_(0.35)O_3 substrates.By covering the SCO film above the LSMO film,we transformed the easy magnetization axis of LSMO from the [001] axis to the [110] axis in the film plane.Based on statistical analyses,we find that the corresponding Mn-Mn ionic distances are different in the two types of LSMO films,causing different distortions of Mn-O octahedron in LSMO.In addition,it also induces diverse electronic occupation states in Mn~(3+) ions.The eg electron of Mn~(3+)occupies 3 z~2-r~2 and x~2-y~2 orbitals in the LSMO and LSMO/SCO,respectively.We conclude that the electronic spin reorientation leads to the transformation of the easy magnetization axis in the LSMO films.     

Photoelectric Characteristic of La0.9Sr0.1MnO3/SrNb0.01Ti0.99O3 p-n Heterojunctions

Good rectifying current-voltage characteristics and nanosecond photoelectric effects are observed in the p-n hereto junctions of La0.9Sr0.1 MnO3/SrNb0.01 Ti0.99O3 fabricated by laser molecular beam epitaxy. The rise time is about 26ns and the full width at half maximum is about 125ns for the open-circuit, photovoltaic pulses when the La0.9Sr0.1MnO3 film in the heterojunction is irradiated by a laser operated at wavelength 308nm with pulse duration of about 25 ns. A qualitative explanation is presented, based on an analysis of the photoelectric effect of p-n hereto junction.     

Preparation and characterization of La0.8Sr0.2MnO3 thin films by an excimer laser MOD process for a bolometer

La_0.8Sr_0.2MnO₃ (LSMO) films were prepared on LaAlO₃ substrates by excimer laser metal organic deposition (ELMOD) at 500 °C. The temperature dependence of resistance of the LSMO films was investigated by changing the laser fluence, irradiation time, and film thickness. It was found that the resistance of the LSMO films 80 nm in thickness that were irradiated by an ArF laser at a fluence of 100 mJ/cm² for 60 min showed a metallic temperature dependence, and the maximum temperature coefficient of resistance of the films (defined as 1/R×dR/dT) was 3.4% at 265 K. PACS 81.15.-z; 81.15.Fg; 81.15.Np; 73.61.-r; 71.30.+h     

The origination of ill-defined layer in organic spin valves

The origination of ill-defined layer in organic spin valves was investigated by using atomic force microscopy (AFM) and Rutherford backscattering (RBS) analysis. It was found that conductive bulges of LSMO film and self-grown pinholes in Alq₃ film other than Co inclusions could lead to the formation of ill-defined layer. The morphology of LSMO substrate had a strong influence on that of Alq₃ film, LSMO/Alq₃ and Alq₃/Co interfaces. Moreover, Alq₃ film with the thickness of 1-4 nm could be barriers which was explained by small active area and added insulated layer in organic magnetic tunnel junctions.     

顺磁性La2/3Sr1/3MnO3层对Bi0.8Ba0.2FeO3薄膜多铁性能的影响

界面效应在提升异质结构材料的多铁性能方面有着重要的作用. 本文采用脉冲激光沉积技术在SrTiO₃(STO)基片上制备了Bi_0.8Ba_0.2FeO₃(BBFO)/La_2/3Sr_1/3MnO₃(LSMO)异质结. X-射线衍射图谱表明异质结呈现单相外延生长, 利用高分辨透射电镜进一步证实了BBFO为四方相结构. X-射线光电子能谱证实异质结中只存在Fe³⁺ 离子, 没有产生价态的变化, 揭示了异质结铁电和铁磁性的增强与BBFO/LSMO的界面有关. 同时, 测试了磁电阻(MR)和磁介电(MD), 当磁场强度为0.8 T, 温度为70 K时, MR约为-42.2%, MD约为21.2%. 并且发现在180 K时出现磁相的转变. 实验结果揭示出异质界面效应在提升材料的多铁性和磁电耦合效应方面具有超常的优点, 是加快多铁材料实际应用的有效途径.     

Fe3O4/MgO(100)薄膜外场诱导电阻变化特性

采用激光分子束外延（L-MBE）方法,以MgO(100)为基底生长了Fe3O4单晶薄膜, 研究了Fe3O4/MgO(100)薄膜外场（温度、磁和激光场）诱导电阻变化特性。X射线衍射(XRD)分析表明Fe3O4薄膜是沿MgO(200)晶面外延生长的单晶薄膜;反射高能电子衍射（RHEED）强度振荡曲线分析表明Fe3O4薄膜表面平整,而且生长模式为2维层状生长;原子力显微镜（AFM）分析表明Fe3O4薄膜表面粗糙度为0.201 nm,说明薄膜表面达到原子级平整度。外场作用下Fe3O4薄膜的电阻测试表明:薄膜样品的电阻在120 K(Verwey转变温度)出现一峰值,略微下降后继续增大, 展现出半导体型的导电特性; 在激光作用下,整个测量温度范围内薄膜样品的电阻减小,样品展示出瞬间光电导的特性;从降温曲线可以看出, Verwey转变温度由无激光作用时的120 K上升到有激光作用时的140 K; 光致电阻变化率随着温度的降低而增大,这主要是由于激光作用导致电荷有序态的退局域化。     

BaTiO3/p-Si异质结的整流特性和光诱导特性的研究

利用脉冲激光沉积法成功制备了BaTiO₃/p-Si异质结, 该异质结在80–300 K 显示出了良好的整流特性和光诱导特性. 开启电压随着温度的升高而逐渐降低. 利用不同频率的光子辐照样品, 观察到明显的光电导效应. 且随着照射光子能量的增大, 结电流也相应变大, 光诱导效应越明显. BaTiO₃薄膜电阻-温度(R-T) 曲线显示氧缺陷条件下BaTiO₃薄膜具有良好的半导体特性. 关键词： 异质结 光诱导效应 3薄膜')" href="#">BaTiO₃薄膜