Thermal shock resistance study of stereolithographic additive-manufactured Al2O3 ceramics by in situ digital radiography

Thermal shock resistance is critical to ensure the service safety of ceramic hot-end components. The thermal shock performance of stereolithographic additive-manufactured ceramics has not yet been studied. In this study, a series of thermal shock experiments with various temperature differences was conducted on stereolithographic additive-manufactured Al₂O₃ ceramics. The surface cracks were analysed based on photographs captured before and after the thermal shock experiments. Three-point bending tests with in situ X-ray digital radiography were conducted to determine the thermal shock resistance. Crack initiation, propagation, and coalescence were observed under flexural loads. The critical temperature difference of the stereolithographic additive-manufactured Al₂O₃ ceramics was determined to be 267.22 °C. The crack length increased and residual strength decreased with increasing temperature differences. The layered structure of the stereolithographic additive-manufactured ceramics slowed crack propagation. We expect that this study will serve as a reference for the performance of stereolithographic additive-manufactured Al₂O₃ ceramics in extreme environments.     

Fractal characterization of ceramic crack patterns after thermal shocks

This work utilized a combination of experimental evidence and fractal geometric method to assess the effect of crack extension concerning the thermal shock on residual strength of ceramics. Sintered alumina (Al₂O₃) ceramic slabs were bundled and quenched in water under different thermal shock temperatures. The fractal dimension of thermal shock crack patterns on the interior surface and the cooled surface was calculated by the Box-counting method. Fracture energy of a fractal pattern of microcracks in quasi-brittle solids was employed to explain the relationship between crack length and fractal dimensions. The results show that if the crack propagation has the same crack length but a larger fractal dimension, it will absorb more fracture energy. The thermal shock crack patterns of Al₂O₃ ceramics with different grain sizes were analyzed, and the smaller grain size ceramic had a higher fractal dimension of crack patterns than the larger one.     

High thermal-conductivity rGO/ZrB2-SiC ceramics consolidated from ZrB2-SiC particles decorated GO hybrid foam with enhanced thermal shock resistance

Graphene derivative materials exhibit excellent mechanical and thermal properties, which have been extensively used to toughen ceramics and improve thermal shock resistance. To overcome the thermal agglomeration of graphene oxide (GO) during heating and drying process, ZrB₂-SiC particles decorated GO hybrid foam with uniformly anchored ceramic particles was synthesized by electrostatic self-assembly and liquid nitrogen-assisted freeze-drying process. Densified rGO/ZrB₂-SiC ceramics with varying microstructure, thermal physical and mechanical properties were obtained by adjusting the content of decorated ceramic particles. Although the flexural strength of rGO/ZrB₂-SiC ceramics have an attenuation compared with that of ZrB₂-SiC ceramic, the thermal conductivity, work of fracture and thermal shock resistance are greatly improved. rGO/ZrB₂-SiC ceramics exhibit delayed fracture and increasing R-curve behavior during the crack propagation. The novel preparation technology allows for the well dispersion of rGO in ZrB₂-SiC ceramics and can be easily extended to other ceramic or metal materials systems.     

Measurement of ceramics cracking during water quenching by digital image correlation

Measuring the thermal shock crack growth process is crucial for revealing ceramic materials and structures’ thermal shock failure mechanisms and evaluating their reliability. We used a self-made water quenching system to conduct thermal shock tests on alumina and zirconia ceramics. The thermal shock process was recorded by high-speed digital image correlation (DIC) during the test. The process of thermal shock crack initiation and propagation in two kinds of ceramics was determined by analyzing the speckle image change on the sample’s surface. It is found that the crack growth rate of alumina is faster than that of zirconia, which is caused by different material parameters. This paper presents an in-situ measurement method for the initiation and propagation of thermal shock cracking in ceramic materials. It can provide a measurement method to identify and predict the thermal shock damage of ceramic components.     

Cyclic thermal shock behaviors of carbon fibers reinforced SiCN ceramics with bio-inspired Bouligand-like architectures

Ceramic matrix composites (CMCs) are commonly used for high temperature components in aircrafts. However, thermal shock, as a typical loading case, will cause high thermal stresses in CMCs resulting in brittle fracture failure, and material cracking caused by thermal shock can further reduce the effectiveness of thermal protection function. In the present paper, we propose a bionic hierarchical fiber preform design method to improve the thermal shock resistance of ceramics. The effect of architectures of fiber preforms of continuous carbon fiber-reinforced CMCs on the thermal shock resistance was investigated to understand its importance and the related mechanical mechanisms. Thermal shock (cycling) tests were performed with continuous carbon fibers reinforced SiCN ceramic matrix composites (C_f/SiCN) prepared by PIP. 3D micro-CT scan and three-point bending tests were also conducted to evaluated the resultant damage. The results showed that smaller internal damage and higher thermal shock resistance can be obtained in comparison to pure SiCN ceramics, and the underlying mechanism can be explained by the fact that smaller pitch angle can resist the through-thickness crack propagation via promoting diffused in-plane damage. The present study offers a possibility in developing biomimetic C_f/SiCN ceramics with excellent thermal shock behavior.     

Highlights of Progress in the Science of Fracture of Ceramics and Glass

Rapid, catastrophic propagation of cracks is described in terms of stress concentration and energy balance conditions from a fracture-mechanics viewpoint. Slow crack propagation by stress corrosion or other mechanisms is also presented in fracture-mechanics terms. Data on slow crack propagation and accompanying acoustic emission in a variety of ceramics and glasses are reviewed. A survey is presented of the application of these results to the quantitative treatment of strength, dependence of strength on loading rate, time to failure, proof testing, acoustic emission monitoring, thermal shock, impact damage, and erosive machining. Some limitations in the application of fracture mechanics to ceramics are discussed.     

Assessment of viscoelastic crack bridging toughening in refractory materials

Viscoelastic bridges can be formed in refractory ceramics while cooling from high temperatures. Such bridges can shield crack tips, thus reducing the effective crack tip stress intensity factors leading to higher resistance to creep and thermal shock. The extent to which the crack tip stress intensity is reduced can be estimated from fracture mechanics models that include experimental measurement of crack bridging and microstructural parameters. In this paper a novel approach is proposed for the assessment of the effective crack bridging toughening from combining destructive and non-destructive test methods. Fracture toughness values were determined applying chevron notched specimen technique and surface damage of the specimen was monitored by image analysis. Different cordierite–mullite compositions characterized by different microstructure morphologies and crack propagation behaviour were investigated. A brief discussion about the correlation between thermo-mechanical properties, microstructure, crack propagation behaviour and thermal shock resistance is presented. Moreover, an empirical model able to determine the presence and effectiveness of the viscoelastic crack bridging ligaments acting in the microstructure under thermal shock conditions and their degradation with increasing thermal shock cycles from parameters measured at room temperature is presented.     

R-curves determination of ordinary refractory ceramics assisted by digital image correlation method

As a figure-of-merit, the rising ratio of crack propagation resistance to fracture initiation resistance indicates a reduction of the brittleness and enhances the thermal shock resistance of ordinary refractory ceramics. The significant nonlinear fracture behaviour is related to the development of a fracture process zone (FPZ). The universal dimensionless load–displacement diagram method is applied as a promising graphical method for the determination of R-curves for magnesia refractories showing different brittleness. By applying digital image correlation (DIC) together with the graphical method, the problems arisen with accurate determination of the fracture initiation resistance and the crack length are overcome. Meanwhile, the R-curve is subdivided with respect to the fracture processes, viz the fracture initiation, the development of FPZ and the onset of traction free macro-crack. With the simultaneous crack lengths evaluated from DIC, the contribution of each fracture process to the crack propagation resistance at certain loading stage is quantitatively presented.     

Crack Growth and Acoustic Emission in Ceramics During Thermal Shock

It is recognized that microcracks may contribute to failure of ceramics undergoing thermal shock, although there is little direct experimental evidence. The combination of acoustic emission (AE) and SEM observations provides such evidence. In this work AE data were analyzed after rapid quenching of samples in silicone oil. A thermal shock resistant material, alumina, and a material resistant to thermal damage, advanced zirconia refractory, have been examined. Cracks were detected by analysis of AE amplitudes and durations and their growth was monitored by systematic SEM observations as thermal shocks of increasing severity were applied. Three-point bending strengths were determined in air after quenching. For the first time SEM images are presented showing early stages of crack initiation for temperature differences less than Δ T_crit , i.e., where the fracture was not believed to occur. Further development of the cracks leads to abrupt strength reduction in alumina and controlled strength loss in zirconia, although AE data did not indicate any particular pattern of catastrophic crack propagation when substantial loss of strength occurred.     

Unified Theory of Thermal Shock Fracture Initiation and Crack Propagation in Brittle Ceramics

A fracture-mechanical theory is presented for crack propagation in brittle ceramics subjected to thermal shock. The criteria of crack stability are derived for a brittle solid uniformly cooled with triaxially constrained external boundaries. Thermal stress crack instability occurs between two values of critical crack length. For short initial crack length, crack propagation occurs kinetically, with the total area of crack propagation proportional to the factor S_t² (1-2 v )/EG, where S_t is tensile strength, v is Poisson's ratio, E is Young's modulus, and G is surface fracture energy. Under these conditions the newly formed crack is subcritical and requires a finite increase in temperature difference before propagation will proceed. For long initial crack length, crack propagation occurs in a quasi-static manner and can be minimized by maximizing the thermal stress crack stability parameter R_st= [G/α² E ]^1/2, where α is the coefficient of thermal expansion. For heterogeneous brittle solids, such as porous refractories, the concept of an "effective flaw length" is introduced and illustrated on the basis of experimental data in the literature. The relative change in strength of a brittle solid as a function of increasing severity of thermal shock is estimated. Good qualitative agreement with literature data is found.