Multi‐Enzymatic Synthesis of Optically Pure β‐Hydroxy α‐Amino Acids

A novel enzymatic production system of optically pure β‐hydroxy α‐amino acids was developed. Two enzymes were used for the system: an N‐succinyl L ‐amino acid β‐hydroxylase (SadA) belonging to the iron(II)/α‐ketoglutarate‐dependent dioxygenase superfamily and an N‐succinyl L ‐amino acid desuccinylase (LasA). The genes encoding the two enzymes are part of a gene set responsible for the biosynthesis of peptidyl compounds found in the Burkholderia ambifaria AMMD genome. SadA stereoselectively hydroxylated several N‐succinyl aliphatic L ‐amino acids and produced N‐succinyl β‐hydroxy L ‐amino acids, such as N‐succinyl‐L ‐β‐hydroxyvaline, N‐succinyl‐L ‐threonine, (2S,3R)‐N‐succinyl‐L ‐β‐hydroxyisoleucine, and N‐succinyl‐L ‐threo‐β‐hydroxyleucine. LasA catalyzed the desuccinylation of various N‐succinyl‐L ‐amino acids. Surprisingly, LasA is the first amide bond‐forming enzyme belonging to the amidohydrolase superfamily, and has succinylation activity towards the amino group of L ‐leucine. By combining SadA and LasA in a preparative scale production using N‐succinyl‐L ‐leucine as substrate, 2.3 mmol of L ‐threo‐β‐hydroxyleucine were successfully produced with 93% conversion and over 99% of diastereomeric excess. Consequently, the new production system described in this study has advantages in optical purity and reaction efficiency for application in the mass production of several β‐hydroxy α‐amino acids.

     

Boronic Acid‐Catalyzed Selective Oxidation of 1,2‐Diols to α‐Hydroxy Ketones in Water

The activation of 1,2‐diols through formation of boronate esters was found to enhance the selective oxidation of 1,2‐diols to their corresponding α‐hydroxy ketones in aqueous medium. The oxidation step was accomplished using dibromoisocyanuric acid (DBI) as a terminal chemical oxidant or an electrochemical process. The electrochemical process was based on the use of platinum electrodes, methylboronic acid [MeB(OH)₂] as a catalyst and bromide ion as a mediator. Electro‐generated OH⁻ ions (EGB) at the cathode acted as a base and “Br⁺” ion generated at the anode acted as an oxidant. Various cyclic and acyclic 1,2‐diols as substrates were selectively oxidized to the corresponding α‐hydroxy ketones via their boronate esters by the two oxidative methods in good to excellent yields.

     

Synthesis and characterization of α‐amino acid‐containing polyester: poly[(ε‐caprolactone)‐co‐(serine lactone)]

Novel polyesters, poly[(ε‐caprolactone)‐co‐(N‐trityl‐L ‐serine‐β‐lactone)]s, were prepared by copolymerizing ε‐caprolactone (CL) with N‐trityl‐L ‐serine‐β‐lactone (TSL) using ZnEt₂ as the catalyst. The number‐average molecular weights were determined which ranged from 2.7 × 10⁴ to 4.9 × 10⁴ Da with dispersity values ranging from 1.6 to 1.8. The structures of the copolymers were investigated by means of ¹H NMR, ¹³C NMR and infrared spectroscopies, thermogravimetric analysis and differential scanning calorimetry. The results indicated that CL and TSL monomer units were randomly distributed within the copolymer backbone structures and the ratios of TSL to CL in the copolymers were close to those in the feeds. After removal of the trityl group under mild condition, a new polyester with side amino groups provided by serine units was obtained. L929 cell culturing test indicated good biocompatibility of the polyester with or without protective groups. © 2012 Society of Chemical Industry     

The Tertiary Amine Nitrogen Atom of Piperazine Sulfonamides as a Novel Determinant of Potent and Selective β3‐Adrenoceptor Agonists

Novel compounds were prepared in fair to good yields as human β₃‐adrenoceptor (β₃‐AR) agonists. In particular, aryloxypropanolamines 7 a – d (EC₅₀=0.57–2.1 nM ) and arylethanolamines 12 a , b , e (EC₅₀=6.38–19.4 nM ) were designed to explore the effects of modifications at the right‐hand side of these molecules on their activity as β₃‐AR agonists. Piperidine sulfonamides 15 a – c , e – g (EC₅₀=6.1–36.2 nM ) and piperazine sulfonamide derivatives 20 – 29 (EC₅₀=1.79–49.3 nM ) were examined as compounds bearing a non‐aromatic linker on the right‐ and left‐hand sides of the molecules. Some piperazine sulfonamides were found to be potent and selective β₃‐AR agonists, even if the amine nitrogen atom is tertiary and not secondary, as is the case for all β₃‐AR agonists reported so far. (S)‐3‐{4‐{N‐{4‐{2‐[2‐Hydroxy‐3‐(4‐hydroxyphenoxy)propylamino]ethyl}phenyl}sulfamoyl}phenoxy}propanoic acid ( 7 d ; EC₅₀=0.57 nM ), (R)‐N‐{4‐[2‐(2‐hydroxy‐2‐phenylethylamino)ethyl]phenyl}‐4‐(3‐octylureido)benzenesulfonamide ( 12 e ; EC₅₀=6.38 nM ), (R)‐2‐[1‐(4‐methoxyphenylsulfonyl)piperidin‐4‐ylamino]‐1‐phenylethanol ( 15 f ; EC₅₀=6.1 nM ), and (S)‐4‐{2‐hydroxy‐3‐[4‐(4‐methoxyphenylsulfonyl)piperazin‐1‐yl]propoxy}phenol ( 25 ; EC₅₀=1.79 nM ) were found to be the most potent β₃‐AR agonists of the aryloxypropanolamine, arylethanolamine, piperidine sulfonamide, and piperazine sulfonamide classes, respectively. The two most potent compounds were identified as possible candidates for further development of β₃‐AR agonists useful in the treatment of β₃‐AR‐mediated pathological conditions.     

Ene‐Carbonyl Reductive Coupling for the Synthesis of 3,3‐Disubstituted Phthalide, 3‐Hydroxyisoindolin‐1‐one and 3‐Hydroxyoxindole Derivatives

An efficient method for the synthesis of three classes of heterocyclic derivatives such as 3,3‐disubstituted phthalides, 3‐hydroxyisoindolin‐1‐ones and 3‐hydroxyoxindoles, is reported. In the presence of the simple reductive system, zinc (Zn)/ammonia (NH₃) [or zinc‐copper (Zn‐Cu)/ammonia], a wide range of alkenes including acrylates, acrylonitrile, acrylamide and vinyl sulfoxide underwent reductive coupling with methyl 2‐acylbenzoates and subsequent lactonization to provide 3,3‐disubstituted phthalides in good to high yields at ambient temperature. In a similar manner, 3‐hydroxyisoindolin‐1‐one and 3‐hydroxyoxindole derivatives could also be easily prepared by direct reductive coupling of phthalimides and N‐substituted isatins with activated alkenes, respectively. Application of this methodology towards the synthesis of 1‐naphthol derivatives on a gram scale is also depicted. Furthermore, the intramolecular phthalimides–ene reductive coupling afforded the respective cyclization products with high diastereoselectivity.

     

Asymmetric α‐Hydroxylation of β‐Indanone Esters and β‐Indanone Amides Catalyzed by C‐2′ Substituted Cinchona Alkaloid Derivatives

The highly catalytic asymmetric α‐hydroxylation of β‐indanone esters and β‐indanone amides using peroxide as the oxidant was realized with a new C‐2′ substituted Cinchona alkaloid derivatives. The two enantiomers of α‐hydroxy‐β‐indanone esters could be obtained by simply changing the oxidant. This protocol allows a convenient access to the corresponding α‐hydroxy‐β‐indanone esters and α‐hydroxy‐β‐indanone amides with up to 99% yield and 98% ee.

     

Part 7. Effects of poly(L‐lactide‐co‐ϵ‐caprolactone) on morphology,structure, crystallization,and physical properties of blends of poly(L‐lactide) and poly(ϵ‐caprolactone)

Blended films of poly(L ‐lactide) [ie poly(L ‐lactic acid)] (PLLA) and poly(?‐caprolactone) (PCL) without or mixed with 10 wt% poly(L ‐lactide‐co‐?‐caprolactone) (PLLA‐CL) were prepared by solution‐casting. The effects of PLLA‐CL on the morphology, phase structure, crystallization, and mechanical properties of films have been investigated using polarization optical microscopy, scanning electron microscopy, differential scanning calorimetry and tensile testing. Addition of PLLA‐CL decreased number densities of spherulites in PLLA and PCL films, and improved the observability of spherulites and the smoothness of cross‐section of the PLLA/PCL blend film. The melting temperatures (T_m) of PLLA and PCL in the films remained unchanged upon addition of PLLA‐CL, while the crystallinities of PLLA and PCL increased at PLLA contents [X_PLLA = weight of PLLA/(weight of PLLA and PCL)] of 0.4–0.7 and at most of the X_PLLA values, respectively. The addition of PLLA‐CL improved the tensile strength and the Young modulus of the films at X_PLLA of 0.5–0.8 and of 0–0.1 and 0.5–0.8, respectively, and the elongation at break of the films at all the X_PLLA values. These findings strongly suggest that PLLA‐CL was miscible with PLLA and PCL, and that the dissolved PLLA‐CL in PLLA‐rich and PCL‐rich phases increased the compatibility between these two phases. © 2003 Society of Chemical Industry     

Synthesis and characterization of degradable copoly(trans‐4‐hydroxy‐L‐proline/ϵ‐caprolactone)

The melt polycondensation reaction of N‐protected trans‐4‐hydroxy‐L ‐proline (N‐Z‐Hpr) and ?‐caprolactone (?‐CL) over a wide range of molar fractions in the feed produced new and degradable poly(N‐Z‐Hpr‐co‐?‐CL)s with stannous octoate as a catalyst. The optimal reaction conditions for the synthesis of the copolymers were obtained with 1.5 wt % stannous octoate at 140°C for 24 h. The synthesized copolymers were characterized by IR spectrophotometry, ¹H NMR, differential scanning calorimetry, and Ubbelohde viscometry. The values of the inherent viscosity (η_inh) and glass‐transition temperature (T_g) of the copolymers depended on the molar fractions of N‐Z‐Hpr. With an increase in the trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) feed from 10 to 90 mol %, a decrease in η_inh from 2.47 to 1.05 dL/g, and an increase in T_g from ?48 to 49°C were observed. The in vitro degradation of these poly(N‐CBz‐Hpr‐co‐?‐CL)s was evaluated from weight‐loss measurements. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88: 3176–3182, 2003     

Enhanced crystallization rate and mechanical properties of poly(l‐lactic acid) by stereocomplexation with four‐armed poly(ϵ‐caprolactone)‐block‐poly(d‐lactic acid) diblock copolymer

Poly(l ‐lactic acid) (PLLA) was blended with a series of four‐armed poly(? ‐caprolactone)‐block ‐poly(d ‐lactic acid) (4a‐PCL‐b ‐PDLA) copolymers in order to improve its crystallization rate and mechanical properties. It is found that a higher content of 4a‐PCL‐b ‐PDLA copolymer or longer PDLA block in the copolymer lead to faster crystallization of the blend, which is attributed to the formation of stereocomplex crystallites between PLLA matrix and PDLA blocks of the 4a‐PCL‐b ‐PDLA copolymers. Meanwhile, the PDLA block can improve the miscibility between flexible PCL phase and PLLA phase, which is beneficial for improving mechanical properties. The tensile results indicate that the 10% 4a‐PCL_5k‐b ‐PDLA_5k/PLLA blend has the largest elongation at break of about 72% because of the synergistic effects of stereocomplexation between enantiomeric PLAs, multi‐arm structure and plasticization of PCL blocks. It is concluded that well‐controlled composition and content of 4a‐PCL‐b ‐PDLA copolymer in PLLA blends can significantly improve the crystallization rate and mechanical properties of the PLLA matrix. © 2017 Society of Chemical Industry     

Chiral Lewis Base‐Catalyzed,Enantioselective Reduction of Unprotected β‐Enamino Esters with Trichlorosilane

Catalytic asymmetric reduction of N‐unsubstituted β‐enamino esters represents a major challenge for asymmetric catalysis. In this paper, the first organocatalytic system that could be used for the asymmetric hydrosilylation of N‐unsubstituted β‐enamino esters has been developed. Using N‐tert‐butylsulfinyl‐L ‐proline‐derived amides and L ‐pipecolinic acid‐derived formamides as catalyst, a broad range of β‐aryl‐ and β‐alkyl‐substituted free β‐amino esters could be prepared with high yields and enantioselectivities. The practicality was illustrated by the gram‐scale asymmetric synthesis of ethyl (R)‐3‐amino‐3‐phenylpropanoate and isopropyl (S)‐3‐amino‐4‐(2,3,5‐trifluorophenyl)butanoate. The resulting product can be smoothly transformed to the FDA approved medicines dapoxetine and sitagliptin in a short synthetic route.

     

Synthesis,physical properties,and crystallization of optically active poly(L‐phenyllactic acid) and poly(L‐phenyllactic acid‐co‐L‐lactic acid)

Optically active poly(L ‐phenyllactic acid) (Ph‐PLLA), poly(L ‐lactic acid) (PLLA), and poly(L ‐phenyllactic acid‐co‐L ‐lactic acid) with weight‐average molecular weight exceeding 6 × 10³ g mol^?1 were successfully synthesized by acid catalyzed direct polycondensation of L ‐phenyllactic acid and/or L ‐lactic acid in the presence of 2.5–10 wt % of p‐toluenesulfonic acid. Their physical properties and crystallization behavior were investigated by differential scanning calorimetry, thermogravimetry, and polarimetry. The absolute value of specific optical rotation ([α]) for Ph‐PLLA (?38 deg dm^?1 g^?1 cm³) was much lower than that of [α] for PLLA (?150 deg dm^?1 g^?1 cm³), suggesting that the helical nature was reduced by incorporation of bulky phenyl group. PLLA was crystallizable during solvent evaporation, heating from room temperature, and cooling from the melt. Incorporation of a very low content of bulky phenyllactyl units even at 4 mol % suppressed the crystallization of L ‐lactyl unit sequences during heating and cooling, though the copolymers were crystallizable for L ‐phenylactyl units up to 6 mol % during solvent evaporation. The activation energy of thermal degradation (ΔE_td) for Ph‐PLLA (200 kJ mol^?1) was higher than that for PLLA (158 kJ mol^?1). The ΔE_td for the copolymers increased with an increase in L ‐phenyllactyl unit content. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Chemoenzymatic Synthesis of GDP‐L‐Fucose Derivatives as Potent and Selective α‐1,3‐Fucosyltransferase Inhibitors

Fucosyltransferases (FucTs) usually catalyze the final step of glycosylation and are critical to many biological processes. High levels of specific FucT activities are often associated with various cancers. Here we report the development of a chemoenzymatic method for synthesizing a library of guanosine diphosphate β‐L ‐fucose (GDP‐Fuc) derivatives, followed by in situ screening for inhibitory activity against bacterial and human α‐1,3‐FucTs. Several compounds incorporating appropriate hydrophobic moieties were identified from the initial screening. These were individually synthesized, purified and characterized in detail for their inhibition kinetics. Compound 5 had a K_i of 29 nM for human FucT‐VI, and is 269 and 11 times more selective than for Helicobacter pylori FucT (K_i=7.8 μM) and for human FucT‐V (K_i=0.31 μM).     

(R)‐α‐Lipoyl‐Glycyl‐L‐Prolyl‐L‐Glutamyl Dimethyl Ester Codrug as a Multifunctional Agent with Potential Neuroprotective Activities

The (R)‐α‐lipoyl‐glycyl‐L ‐prolyl‐L ‐glutamyl dimethyl ester codrug (LA‐GPE, 1 ) was synthesized as a new multifunctional drug candidate with antioxidant and neuroprotective properties for the treatment of neurodegenerative diseases. Physicochemical properties, chemical and enzymatic stabilities were evaluated, along with the capacity of LA‐GPE to penetrate the blood–brain barrier (BBB) according to an in vitro parallel artificial membrane permeability assay for the BBB. We also investigated the potential effectiveness of LA‐GPE against the cytotoxicity induced by 6‐hydroxydopamine (6‐OHDA) and H₂O₂ on the human neuroblastoma cell line SH‐SY5Y by using the 3‐(4,5‐dimethylthiazol‐2‐yl)‐2,5‐diphenyltetrazolium bromide (MTT) reduction assay. Our results show that codrug 1 is stable at both pH 1.3 and 7.4, exhibits good lipophilicity (log P=1.51) and a pH‐dependent permeability profile. Furthermore, LA‐GPE was demonstrated to be significantly neuroprotective and to act as an antioxidant against H₂O₂‐ and 6‐OHDA‐induced neurotoxicity in SH‐SY5Y cells.     

Preparation of high‐molecular‐weight poly(L‐lactic acid)‐based polymers through direct condensation polymerization in bulk state

Poly(L ‐lactic acid‐co‐succinic acid‐co‐1,4‐butanediol) (PLASB) was synthesized by a direct condensation copolymerization of L ‐lactic acid, succinic acid (SA), and 1,4‐butanediol (BD) in bulk state using titanium(IV) butoxide (TNBT) as a catalyst. Weight average molecular weight (M_w) of PLASB increased from 3.5 × 10⁴ to 2.1 × 10⁵ as the content of SA and BD went up from 0.01 to 0.5 mol/100 mol of L ‐lactic acid (LA). PLASB having M_w in the range from 1.8 × 10⁵ to 2.1 × 10⁵ showed tensile properties comparable to those of commercially available poly(L ‐lactic acid) (PLLA). In sharp contrast, homopolymerization of LA in bulk state produced PLLA with M_w as low as 4.1 × 10⁴, and it was too brittle to prepare specimens for the tensile tests. M_w of PLASB synthesized by using titanium(IV)‐2‐ethyl(hexoxide), indium acetate, indium hydroxide, antimony acetate, antimony trioxide, dibutyl tin oxide, and stannous‐2‐ethyl 1‐hexanoate was compared with that of PLASB obtained by TNBT. Ethylene glycol oligomers with different chain length were added to LA/SA in place of BD to investigate effect of chain length of ethylene glycol oligomers on the M_w of the resulting copolymers. Biodegradability of PLASB was analyzed by using the modified Sturm test. Toxicity of PLASB was evaluated by counting viable cell number of mouse fibroblast cells that had been in contact with PLASB discs. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 466–472, 2006     

Derivation of a Retinoid X Receptor Scaffold from Peroxisome Proliferator‐Activated Receptor γ Ligand 1‐Di(1H‐indol‐3‐yl)methyl‐4‐trifluoromethylbenzene

PPARγ agonist DIM‐Ph‐4‐CF ₃ , a template for RXRα agonist (E)‐3‐[5‐di(1‐methyl‐1H‐indol‐3‐yl)methyl‐2‐thienyl] acrylic acid: DIM‐Ph‐CF₃ is reported to inhibit cancer growth independent of PPARγ and to interact with NR4A1. As both receptors dimerize with RXR, and natural PPARγ ligands activate RXR, DIM‐Ph‐4‐CF₃ was investigated as an RXR ligand. It displaces 9‐cis‐retinoic acid from RXRα but does not activate RXRα. Structure‐based direct design led to an RXRα agonist.

     

Thermal degradation of poly(3‐hydroxybutyrate) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) as studied by TG,TG–FTIR,and Py–GC/MS

The thermal degradation kinetics of poly(3‐hydroxybutyrate) (PHB) and poly(3‐hydroxybutyrate‐co‐3‐hydroxyvalerate) [poly(HB–HV)] under nitrogen was studied by thermogravimetry (TG). The results show that the thermal degradation temperatures (T_o, T_p, and T_f) increased with an increasing heating rate (B). Poly(HB–HV) was thermally more stable than PHB because its thermal degradation temperatures, T_o(0), T_p(0), and T_f(0)—determined by extrapolation to B = 0°C/min—increased by 13°C–15°C over those of PHB. The thermal degradation mechanism of PHB and poly(HB–HV) under nitrogen were investigated with TG–FTIR and Py–GC/MS. The results show that the degradation products of PHB are mainly propene, 2‐butenoic acid, propenyl‐2‐butenoate and butyric‐2‐butenoate; whereas, those of poly(HB–HV) are mainly propene, 2‐butenoic acid, 2‐pentenoic acid, propenyl‐2‐butenoate, propenyl‐2‐pentenoate, butyric‐2‐butenoate, pentanoic‐2‐pentenoate, and CO₂. The degradation is probably initiated from the chain scission of the ester linkage. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1530–1536, 2003     

Synthesis and characterization of degradable copoly(ester–amide)s: Poly(trans‐4‐hydroxy‐L‐proline‐co‐ε‐caprolactam)

Novel copolyesteramides were synthesized by reacting trans‐4‐hydroxy‐N‐benzyloxycarbonyl‐L ‐proline (N‐CBz‐Hpr) with ε‐caprolactam (CLM) in the presence of stannous octoate [Sn(II) Oct.] as a catalyst. Various techniques, including ¹H‐NMR, IR, DSC, and viscosity, were used to elucidate structural characteristics and thermal properties of the resulting copolymers. Data showed that the optimal reaction condition for the synthesis of the copolymers was obtained by using 3 wt % Sn(II) Oct. at 170°C for 24 h. The DSC analysis demonstrated amorphous structure for most of the copolymers. The glass‐transition temperature of the copolymers shifts to a higher temperature with increasing Hpr/CLM molar ratio. In vitro degradation of these poly(N‐CBz‐Hpr‐co‐CLM)s was evaluated by weight loss measurements. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 1615–1621, 2002     

Oxygen‐Involved Oxidative Deacetylation of α‐Substituted β‐Acetyl Amides – Synthesis of α‐Keto Amides

α‐Substituted β‐acetyl amides could undergo C C bond cleavage to form α‐keto amides when treated with copper(II) chloride (CuCl₂) and boron trifluoride diethyl etherate (BF₃⋅OEt₂) under an oxygen atmosphere. The yield can be increased by the addition of tert‐butyl hydroperoxide which alone can also effect the reaction. The reaction provides a new protocol for the synthesis of α‐keto amides.

     

Methionine‐Containing Poly(amino acid) Hybrid Fibers via Self‐Assembly at Aqueous Interface

Summary: Using sulfonium groups to create a novel fiber material, methionine‐containing hybrid fibers were prepared from S‐methylated poly(L ‐methionine) and poly(L ‐lysine, L ‐methionine) solutions with gellan solution by polyion complex (PIC) formation via self‐assembly at the aqueous interface. The breaking strain of the PIC fibers were increased by incorporation of methionine residues into the poly(L ‐lysine). These findings may provide a new approach for preparing a wool‐like fiber in aqueous media using the synthetic water‐soluble methionine‐containing poly(amino acid)s.

SEM image of Met‐containing PIC fiber: (a) poly[Met¹⁹Met(SMe)⁸¹]‐gellan fiber (magnification, ×500).     

The Use of an Unusual Rearrangement Sequence for the Syntheses of 3‐(1‐Aminoalkylidene)‐3H‐thiophen‐2‐ones and two Examples of their Surprising Electrophilic‐Induced Dimerization Reactions

The reaction of 2‐amino‐3‐carbomethoxythiophene ( 1a ) and 2‐amino‐3‐carboethoxy‐4,5‐dimethylthiophene ( 1b ) with methyl‐ or ethylmagnesium chloride leads to new 3‐(1‐aminoalkylidene)‐3H‐thiophen‐2‐ones 4a—d in good yields (60—87%). Treatment of the compounds 4a and 4c with catalytic amounts of p‐TsOH in boiling CHCl₃ afforded the (±)‐4,4′‐bis‐(1‐aminoalkylidene)‐3′,4′‐4H,2′H‐[2,3′]bithiophenyl‐5,5′‐diones 9a and 9b as new interesting heterocycles in preparatively useful yields (60/mdash;65%).