Ruthenium supported on nitrogen-doped porous carbon for catalytic hydrogen generation from NH3BH3 hydrolysis

In this paper, ruthenium supported on nitrogen-doped porous carbon (Ru/NPC) catalyst is synthesized by a simple method of in situ reduction using ammonia borane (AB) as reducing agent. The composition and structure of Ru/NPC catalyst are systematically characterized. This catalyst can efficiently catalyze the hydrolysis of AB. The hydrogen production reaction is completed within about 90 s at a temperature of 298 K and the maximum rate of hydrogen production is 3276 ml·s⁻¹·g⁻¹ with a reduced activation energy of 24.95 kJ·mol⁻¹. The turnover frequency (TOF) for hydrogen production is about 813 mol_H2·mol_Ru⁻¹·min⁻¹. Moreover, this catalyst can be recycled with a well-maintained performance. After five cycles, the maximum rate of hydrogen generation is maintained at 2206 ml·s⁻¹·g⁻¹, corresponding to 67.3% of the initial catalytic activity. Our results suggest that Ru/NPC prepared by in situ reduction is a highly efficient catalyst for hydrolytic dehydrogenation of AB.     

TiO2–CdS supported CuNi nanoparticles as a highly efficient catalyst for hydrolysis of ammonia borane under visible-light irradiation

TiO₂–CdS nanotubes (NTs) were used for the first time as a support to load metal nanoparticles (NPs) for the hydrolysis of ammonia borane (AB) which is a new strategy. The TiO₂–CdS NTs support was first synthesized using a hydrothermal method, and then the CuNi NPs were loaded using a liquid-phase reduction method. The synthesized samples were characterized by XRD, SEM-EDS, TEM, XPS, ICP, UV–Vis, and PL analyses. The characterization results show that the CuNi NPs existed in the form of an alloy with a size of ~1.2 nm and uniformly dispersed on the support. Compared with their single metal counterparts, the bimetallic CuNi-supported catalysts showed a higher catalytic activity in the hydrolysis of AB under visible-light irradiation: Cu_0·45Ni_0·55/TiO₂–CdS catalyst had the fastest hydrogen evolution rate with a high conversion frequency (TOF) of 25.9 mol_H2·mol_cat⁻¹ min⁻¹ at 25 °C and low activation energy of 32.8 kJ mol⁻¹. Cu_0.45Ni_0.55/TiO₂–CdS catalyst showed good recycle performance, maintaining 99.3% and 85.6% of the original hydrogen evolution rate even after five and ten recycles, respectively. Strong absorption of visible light, improved electron–hole separation efficiency, and metal synergy between Cu and Ni elements played a crucial role in improving the catalytic hydrolysis performance of AB. The catalyst prepared in this study provides a new strategy for the application of photocatalysts.     

Ruthenium nanoparticles supported in the network of HES-p(AMPS) IPN hydrogel as efficient catalyst for hydrogen production from the hydrolysis of ethylenediamine bisborane

In this study, Ru(0) nanoparticles supported in 2-hydroxyethyl starch-p-(2-Acrylamido-2-methyl-1-propanesulfonic acid) interpenetrating polymeric network (HES-p(AMPS) IPN) were synthesized as hydrogel networks containing hydroxyethyl starch, which is a natural polymer with oxygen donor atoms. The structure and morphology of the prepared HES-p(AMPS) IPN hydrogel and Ru@HES-p(AMPS) IPN catalyst were characterized using Fourier transform infrared spectroscopy (FT-IR), scanning electron microscope (SEM), X-ray diffraction (XRD), and transmission electron microscope (TEM). Ru@HES-p(AMPS) IPN was used as catalyst for hydrogen production from the hydrolysis of ethylenediamine bisborane (EDAB). The activation parameters for the hydrolysis reaction of EDAB catalyzed by Ru@HES-p(AMPS) IPN were calculated as E_a = 38.92 kJ mol⁻¹, ΔH^# = 36.28 kJ mol⁻¹, and ΔS^# = −111.85 J mol⁻¹ K⁻¹, respectively. The TOF for the Ru@HES-p(AMPS) IPN catalyst was 2.253 mol H₂ (mol Ru(0) min)⁻¹. It was determined that Ru@HES-p(AMPS) IPN, a reusable catalyst, still had 81.5% catalytic activity after the 5th use.     

Effective hydrolysis of ammonia borane catalyzed by ruthenium nanoparticles immobilized on graphic carbon nitride

Graphic carbon nitride prepared by the thermal decomposition of urea was used a catalyst support for the in situ immobilization of Ru nanoparticles (NPs) (Ru/g-C₃N₄). The catalytic property of Ru/g-C₃N₄ was investigated in the hydrolysis of ammonia borane (AB) in an aqueous solution under mild conditions. Results show that the in situ generated Ru NPs are well dispersed on the surface of g-C₃N₄ with a mean particle size of 2.8 nm. The catalytic performance for AB hydrolysis indicates that 3.28 wt% Ru/g-C₃N₄ exhibits excellent catalytic activity with a high turnover frequency number of 313.0 mol H₂ (mol Ru·min)⁻¹ at room temperature. This strategy may provide an eco-friendly catalytic system for developing a sustainable catalytic route to hydrogen production.     

Constructing MOF-199 anchored RuMoP nanoparticles as a high-performance catalyst for boosting the hydrolysis of AB

Porous octahedral copper-based metal organic framework MOF-199 anchored with Ru, RuMo, RuP, and RuMoP nanoparticles (NPs) was fabricated by a simple liquid impregnation method and applied as a high-performance catalyst for the hydrolysis of ammonia borane (AB) at room temperature. Comparison of the catalytic activities of Ru@MOF-199, RuMo@MOF-199, RuP@MOF-199, and commercial Ru/C shows that RuMoP@MOF-199 owns a very high turnover frequency of 735.6 mol H₂ min⁻¹ (mol Ru)⁻¹ and a low activation energy of 46.9 kJ/mol. Loading RuMoP NPs onto MOF-199 owing to synergistic effects, functional, size, and support effects kinetically facilitates the oxidative cleavage of attacked H-OH and elevate the catalytic performance. Moreover, this catalyst shows satisfied durability after five cycles for the hydrolytic dehydrogenation of AB. The novel structural features and efficient performance would provide an essential reference for the utilization of high-performance catalyst development.     

Oxygen vacancies and morphology engineered Co3O4 anchored Ru nanoparticles as efficient catalysts for ammonia borane hydrolysis

Developing efficient but facile strategies to modulate the catalytic activity of Ru deposited on metal oxides is of broad interest but remains challenging. Herein, we report the oxygen vacancies and morphological modulation of vacancy-rich Co₃O₄ stabilized Ru nanoparticles (NPs) (Ru/V_O-Co₃O₄) to boost the catalytic activity and durability for hydrogen production from the hydrolysis of ammonia borane (AB). The well-defined and small-sized Ru NPs and V_O-Co₃O₄ induced morphology transformation via in situ driving V_O-Co₃O₄ to 2D nanosheets with abundant oxygen vacancies or Co²⁺ species considerably promote the catalytic activity and durability toward hydrogen evolution from AB hydrolysis. Specifically, the Ru/V_O-Co₃O₄ pre-catalyst exhibits an excellent catalytic activity with a high turnover frequency of 2114 min^?1 at 298 K. Meanwhile, the catalyst also shows a high durability toward AB hydrolysis with six successive cycles. This work establishes a facile but efficient strategy to construct high-performance catalysts for AB hydrolysis.     

Solvent-free synthesis of Rh/meso-Al2O3 via mechanochemistry for hydrolytic dehydrogenation of ammonia borane

An effective strategy synthesis of Rh/meso-Al₂O₃ catalysts was demonstrated by mechanochemistry for hydrolytic dehydrogenation of ammonia borane (AB). These catalysts are characterized systematically by N₂ adsorption-desorption isotherms, X-ray diffraction (XRD), X-ray photoelectron spectrometry (XPS), scanning electron microscope (SEM), and transmission electron microscope (TEM). The results show that the turnover frequency (TOF) and activation energy (E_a) are 246.8 mol_H2·mol_Rh^?1·min^?1 and 47.9 kJ mol^?1 for hydrolytic dehydrogenation of at 298 K catalyzed by Rh/Al₂O₃-CTAB-400, obviously higher than those previously reported catalysts. Furthermore, catalyst Rh/Al₂O₃-CTAB-400 can be recycled by simple centrifugal separation and the catalytic activity is still well maintained after five cycles. In addition, a plausible mechanism for hydrolytic dehydrogenation of AB has also been proposed. This mechanochemical synthesis method exhibits great application prospects for the preparation of heterogeneous catalysts.     

Rapid preparation of Ru(0) nanoparticles stabilized with water-soluble biopolymer for hydrogen production from ammonia borane: Development of battery-like hydrolysis media

The biohybrid Na-Alg@Ru catalyst was prepared as a result of stabilizing Ru(0) nanoparticles with biopolymer chains of sodium alginate. The in-situ prepared Ru(0) nanoparticles had an average particle size of 1.023 ± 0.097 nm. The monodisperse Ru(0) nanoparticles prepared with a very practical, inexpensive and rapid method were used as a catalyst in hydrogen production by the hydrolysis reaction of ammonia borane (AB). The Na-Alg@Ru catalyst containing 3 mg Ru(0) metal catalyzed the hydrolysis of 50 mM AB with 100% yield, and the activation energy (E_a) of the reaction was estimated as 61.05 kJ mol⁻¹. In addition, the Na-Alg@Ru nanoparticles were prepared with acrylamide as p(AAm)/Na-Alg@Ru hydrogel films suitable for use in hydrogen production in fuel cells, which represents a battery-like environment, and used for hydrogen production from AB. Thus, it was shown that the catalysts prepared in a few nm size could easily be used in battery-like environments.     

Pd nanoparticles anchoring to core-shell Fe3O4@SiO2-porous carbon catalysts for ammonia borane hydrolysis

A modified Stöber method is applied to synthesize the magnetic core-shell Fe₃O₄@SiO₂ particles, followed by compositing a series of porous glucose-derived carbon with ZnCl₂ as etchant. Then, ultrafine Pd nanoparticles (NPs) are successfully anchored to the resulting Fe₃O₄@SiO₂-PC composites with an in-situ reduction strategy. The particle sizes of Pd NPs are mainly centered in the range of 2.3–4.3 nm in the as-prepared Pd/Fe₃O₄@SiO₂-PC catalysts, owning a hierarchical porous structure with high specific surface area (S_BET = 626.0 m² g⁻¹) and large pore volume (V_p = 0.61 cm³ g⁻¹). Their catalytic behavior for the hydrogen generation from ammonia borane (AB) hydrolysis is investigated in details. The corresponding apparent activation energy is as low as 28.4 kJ mol⁻¹ and the reaction orders with AB and Pd concentrations are near zero and 1.10 under the present conditions, respectively. In addition, the magnetic catalysts, which could be easily separated out by a magnet, are still highly active even after nine runs, revealing their excellent reusability.     

Facile construction of composition-tuned ruthenium-nickel nanoparticles on g-C3N4 for enhanced hydrolysis of ammonia borane without base additives

Developing high-efficiency and low-cost catalysts for hydrogen evolution from hydrolysis of ammonia borane (AB) is significant and critical for the exploitation and utilization of hydrogen energy. Herein, the in-situ fabrication of well-dispersed and small bimetallic RuNi alloy nanoparticles (NPs) with tuned compositions and concomitant hydrolysis of AB are successfully achieved by using graphitic carbon nitride (g-C₃N₄) as a NP support without additional stabilizing ligands. The optimized Ru₁Ni_7.5/g-C₃N₄ catalyst exhibits an excellent catalytic activity with a high turnover frequency of 901 min^?1 and an activation energy of 28.46 kJ mol^?1 without any base additives, overtaking the activities of many previously reported catalysts for AB hydrolysis. The kinetic studies indicate that the AB hydrolysis over Ru₁Ni_7.5/g-C₃N₄ is first-order and zero-order reactions with respect to the catalyst and AB concentrations, respectively. Ru₁Ni_7.5/g-C₃N₄ has a good recyclability with 46% of the initial catalytic activity retained even after five runs. The high performance of Ru₁Ni_7.5/g-C₃N₄ should be assigned to the small-sized alloy NPs with abundant accessible active sites and the synergistic effect between the composition-tuned Ru–Ni bimetals. This work highlights a potentially powerful and simple strategy for preparing highly active bimetallic alloy catalysts for AB hydrolysis to generate hydrogen.     

Ultrafine cobalt–molybdenum–boron nanocatalyst for enhanced hydrogen generation property from the hydrolysis of ammonia borane

The hydrolysis of ammonia borane (NH₃BH₃) is recognized as an efficient way of hydrogen generation if it can be effectively catalyzed. In this work, a series of cobalt–molybdenum–boron (Co–Mo–B) nanoparticles (NPs) on copper (Cu) foil are introduced as catalysts for NH₃BH₃ hydrolysis by electroless deposition method. The influence of the depositing pH value on the catalytic property is investigated by adjusting the pH value ranged from 10.5 to 12.0. By optimizing the value to 11, the ultrafine Co–Mo–B NPs with the grain size around 4.3 nm show the best catalytic property for NH₃BH₃ hydrolysis. The hydrogen generation rate reaches 5818.0 mL·min⁻¹·g⁻¹ when the hydrolysis temperature is 298 K. The thermodynamic tests show that the lower activation energy (E_a) is estimated to be 59.3 kJ·mol⁻¹. It can be found that the catalytic property in this work overtakes that of partial non-precious metal NPs, and is even better than some precious metal NPs previously reported. The hydrolysis reaction of NH₃BH₃ catalyzed by ultrafine Co–Mo–B NPs is a non-spontaneous process. In addition, the cycling ability of the ultrafine Co–Mo–B NPs is also studied and the results demonstrate that the catalyst is a recyclable one toward the hydrolysis of NH₃BH₃ under mild reaction conditions.     

Alumina nanofiber-stabilized ruthenium nanoparticles: Highly efficient catalytic materials for hydrogen evolution from ammonia borane hydrolysis

Effective catalysts for hydrogen generation from ammonia borane (AB) hydrolysis should be developed for the versatile applications of hydrogen. In this study, ruthenium nanoparticles (NPs) supported on alumina nanofibers (Ru/Al₂O₃-NFs) were synthesized by reducing the Ru(Ш) ions impregnated on Al₂O₃-NFs during AB hydrolysis. Results showed that the Ru NPs with an average size of 2.9 nm were uniformly dispersed on the Al₂O₃-NFs support. The as-synthesized Ru/Al₂O₃-NFs exhibited a high turnover frequency of 327 mol H₂ (mol Ru min)^?1 and an activation energy of 36.1 kJ mol^?1 for AB hydrolysis at 25 °C. Kinetic studies showed that the AB hydrolysis catalyzed by Ru/Al₂O₃-NFs was a first-order reaction with regard to the Ru concentration and a zero-order reaction with respect to the AB concentration. The present work reveals that Ru/Al₂O₃-NFs show promise as a catalyst in developing a highly efficient hydrogen storage system for fuel cell applications.     

Metal-Schiff Base complex catalyst in KBH4 hydrolysis reaction for hydrogen production

It is the first study to synthesize Co(II)-Schiff Base complex and to use it like a catalyst for potassium borohydride hydrolysis reaction to hydrogen production. Co(II)-complex is synthesized with CoCl₂·6H₂O and 5-Amino-2,4-dichlorophenol-3,5-di-tert-butylsalisylaldimine ligand. KBH₄ hydrolysis reaction is studied according as percentage of KBH₄, percentage of KOH, amount of Co-Schiff Base complex catalyst and temperature effects. Co-Schiff Base complex is highly effective catalyst and initial rates (R_o) of KBH₄ hydrolysis reaction were 61220.00 and 99746.67 mL H₂. g⁻¹ cat. min⁻¹ at 30 °C and 50 °C. Furthermore this study includes the kinetic calculations and for this reaction calculated activation energy is 17.56 kJ mol⁻¹.     

Synthesis of Cu@FeCo core–shell nanoparticles for the catalytic hydrolysis of ammonia borane

Non-noble Cu@FeCo core–shell nanoparticles (NPs) containing Cu cores and FeCo shells have been successfully in situ synthesized via a facile chemical reduction method. The NPs exerted composition-dependent activities towards the catalytic hydrolysis of ammonia borane (NH₃BH₃, AB). Among them, the Cu_0.3@Fe_0.1Co_0.6 NPs showed the best catalytic activity, with which the max hydrogen generation rate of AB can reach to 6674.2 mL min⁻¹ g⁻¹ at 298 K. Kinetic studies demonstrated that the hydrolysis of AB catalysed by Cu_0.3@Fe_0.1Co_0.6 NPs was the first order with respect to the catalyst concentration. The activation energy (Ea) was calculated to be 38.75 kJ mol⁻¹. Furthermore, the TOF value (mol of H₂. (mol of catalyst. min)⁻¹) of Cu_0.3@Fe_0.1Co_0.6 NPs was 10.5, which was one of the best catalysts in the previous reports. The enhanced catalytic activity was largely attributed to the preferable synergistic effect of Cu, Fe and Co in the special core–shell structured NPs.     

Efficient hydrogen evolution from ammonia borane hydrolysis with Rh decorated on phosphorus-doped carbon

Development of supported ligand-free ultrafine Rh nanocatalysts for efficient catalytic hydrogen evolution from ammonia borane (AB) is of importance but remains a tremendous challenge. Here, ultrafine and ligand-free Rh nanoparticles (NPs) (2.19 nm in diameter) were in-situ decorated on porous phosphorus-functionalized carbon (PPC) prepared by pyrolyzing hyper-cross-linked networks of triphenylphosphine and benzene. The resultant Rh/PPC showed excellent hydrogen production activity from AB hydrolysis (Turnover frequency: 806 min⁻¹). Kinetic investigations indicated that AB hydrolysis using Rh/PPC exhibited first-order and zero-order reactions with Rh and AB concentrations, respectively. Activation energy (E_a) toward hydrogen generation from AB with Rh/PPC is as low as 22.7 kJ/mol. The Rh/PPC catalyst was recyclable and reusable for at least four times. The oxygen- and phosphorus-functional groups are beneficial for the affinity of Rh complex on the PPC surface, resulting in ultrafine and ligand-free Rh NPs with high dispersity and ability to supply abundant surface accessibility to catalytically active sites for AB hydrolysis. This study proposes a feasible approach for the synthesis of ultrafine and ligand-free metal NPs supported on heteroatom-doped carbon by using hyper-cross-linked networks.     

Hydrogen production from ammonia borane via hydrogel template synthesized Cu, Ni, Co composites

In situ Co, Cu and Ni nanoparticles were synthesized by chemical reduction of the absorbed Co (II), Cu (II) and Ni (II) ions inside hydrogel networks prepared from 2-acrylamido-2-methyl-1-propansulfonic acid (AMPS) and were used as a catalyst system in the generation of hydrogen in hydrolysis of ammonia borane (AB). Several parameters affecting the hydrolysis reaction such as the type of the metal, the amount of catalyst, the initial concentration of AB, and temperature, were investigated. The activation energy values in the hydrolysis reaction of AB solution in the presence p(AMPS)-Co, p(AMPS)-Cu and p(AMPS)-Ni catalyst systems were calculated as E_a = 47.7 kJ mol⁻¹, 48.8 kJ mol⁻¹ and 52.8 kJ mol⁻¹, respectively. Thus, the catalytic activity of the metal nanoparticles prepared inside the same hydrogel matrix was found to be Ni < Cu < Co.     

Ru nanoparticles loaded on tannin immobilized collagen fibers for catalytic hydrolysis of ammonia borane

A kind of Ru-based catalyst was prepared by using a natural polyphenolic polymer (bayberry tannin, BT) immobilized on collagen fiber (CF) as the stabilizer and carrier of Ru nanoparticles (NPs) and characterized to detect its main physicochemical properties. The CF-BT-Ru catalyst was found to be in an orderly fiber morphology with Ru NPs with about diameter of 2.6 nm highly distributed on the surface. The research on catalytic activity of CF-BT-Ru focused on the hydrolysis of ammonia borane (AB) to produce hydrogen. The influences of Ru loading, Ru dosage, AB concentration and temperature on the catalytic AB hydrolysis were investigated in detail, and the related thermodynamic parameters (activation energy (E_a), activation entropy (△S), activation enthalpy (△H) and Gibbs free energy (△G)) were calculated. The experimental results indicated that CF-BT-Ru exhibited high catalytic activity. Its turnover frequency (TOF) was as high as 322 ${\text{mol}}_{{\text{H}}_2}?{\text{mol}}_{\text{Ru}}^{?1}?{\text{min}}^{?1}$ and E_a was as low as 32.41 kJ mol^?1 for AB hydrolysis. Moreover, CF-BT-Ru exhibited satisfied reusability and stability. Its activity lost only one-fifth and no obvious agglomeration and leakage of Ru NPs were found after repeated use for 5 times.     

Enhanced catalytic performance of CuNi bimetallic nanoparticles for hydrogen evolution from ammonia borane hydrolysis

Ammonia borane (AB, NH₃BH₃) hydrolysis is an effective way to safely generate hydrogen. However, a suitable catalyst is indispensable because the hydrolytic reaction cannot take place kinetically at room temperature. In this work, CuNi alloy nanoparticles are immobilized on porous graphitic carbon nitride (g-C₃N₄) with a facile adsorption-chemical reduction method. Benefiting from the hierarchical porous structure of the support, the interesting alloy effect of Cu and Ni, as well as the synergistic effect between g-C₃N₄ and the CuNi alloys, the optimal Cu_0·7Ni_0.3/g-C₃N₄ catalyst displays excellent catalytic performance in AB hydrolysis, such as high turnover frequency (2.08 min⁻¹, at 303 K), low apparent activation energy (23.58 kJ mol⁻¹), and satisfactory durability. The results verify that the optimal catalyst has particular potential in hydrogen energy utilization due to the advantages such as the facile preparation procedure, low cost and excellent catalytic behavior.     

Hydrogen evolution from hydrolysis of ammonia borane catalyzed by Rh/g-C3N4 under mild conditions

Developing effective catalysts for hydrogen evolution from hydrolysis of ammonia borane (AB) is of great significance considering the useful applications of hydrogen. Herein, graphitic carbon nitride (g-C₃N₄) prepared through the simply pyrolysis of urea was employed as a support for Rh nanoparticles (NPs) stabilization. The in-situ generated Rh NPs supported on g-C₃N₄ with an average size of 3.1 nm were investigated as catalysts for hydrogen generation from the hydrolysis of AB under mild conditions. The Rh/g-C₃N₄ catalyst exhibits a high turnover frequency of 969 mol H₂· (min·mol_Rh)^?1 and a low activation energy of 24.2 kJ/mol. The results of the kinetic studies show that the catalytic hydrolysis of AB over the Rh/g-C₃N₄ catalyst is a zero-order reaction with the AB concentration and a first-order reaction with the Rh concentration. This work demonstrates that g-C₃N₄ is a useful support to design and synthesis of effective Rh-based catalyst for hydrogen-based applications.     

Hydrogen production via copper nanocatalysts stabilized by cyclen derivative hydrogel networks from the hydrolysis of ammonia borane and ethylenediamine bisborane

In this study, p(AAm-co-TACYC) hydrogels were synthesized using TACYC crosslinker. The p(AAm-co-TACYC) hydrogel was used for preparation of Cu(0) nanoparticles as support material. The p(AAm-co-TACYC)@Cu was prepared by chemical reduction of Cu²⁺ ions in the p(AAm-co-TACYC) networks and was structurally characterized in detail. Later the catalytic activity of p(AAm-co-TACYC)@Cu was investigated for hydrogen production from AB and EDAB hydrolysis. Detailed kinetic studies were performed for both hydrogen storage materials. The p(AAm-co-TACYC)@Cu was a more active catalyst for the EDAB hydrolysis reaction. The E_a values of p(AAm-co-TACYC)@Cu for the AB and EDAB hydrolysis reactions were determined as 68.36 kJ mol⁻¹ and 39.07 kJ mol⁻¹, respectively. In addition to the perfect catalytic activity of p(AAm-co-TACYC)@Cu, it had good reusability. After ten consecutive uses for AB and EDAB hydrolysis, the p(AAm-co-TACYC)@Cu still had 88% and 85% of initial activity, respectively.