Poly(hydroxamic acid) hydrogels from poly(acrylamide): preparation and characterization

Summary Poly(hydroxamic acid) (PHA) hydrogels from crosslinked poly(acrylamide) (PAAm) hydrogels containing different type crosslinkers such as such as N, N'-methylene bisacrylamide (N) and ethyleneglycol dimethacrylate (E). The effect of crosslinkers on some physical properties was investigated. The structure of hydrogels was characterized spectroscopically and thermally. The swelling parameters of PHA in distilled water, such as percent equilibrium swelling (S_eq%), initial swelling rate (r_o), maximum equilibrium swelling (S_max), diffusional exponent (n), network parameter (k) and diffusion coefficient (D) were calculated. It has been found that the ionogenity of PHA and the structure of the used crosslinkers during the synthesis have been effective on the swelling behaviour of the hydrogels. Received: 12 February 2001 / Revised version: 30 June 2001 / Accepted: 11 July 2001     

Uranyl ion binding properties of poly(hydroxamic acid) hydrogels

Summary   Poly(hydroxamic acid) (PHA) hydrogels, obtained from the synthesis of crosslinked poly(acrylamide) (PAAm) gels have been prepared, and their uranyl ion binding properties from two different sources were investigated. Swelling and binding parameters of crosslinked PHA gels were determined from swelling and uranyl ion adsorption studies. The effect of uranyl ion concentration, pH, temperature and mass of adsorbent on the uranyl ion adsorption were examined. The binding process between PHA and uranyl ions complies with the S type adsorption according to Giles classification. Free energies of the adsorptions found as negative values indicating spontaneous adsorption process. The structure and hydrophilicity of the used crosslinkers, the ionogenity of PHA polymers and the source of uranyl ions found to be effective on the swelling and binding behaviors of PHA hydrogels. Received: 3 March 2001 / Revised version: 30 June 2001 / Accepted: 9 July 2001     

Nanocomposite hydrogels for selective removal of cationic dyes from aqueous solutions

Removal of organic dyes from waste water has received a significant attention in recent years. In this work, a set of nanocomposite hydrogels (NHs) were prepared and their capacity to absorb crystal violet (CV), a cationic dye, and acid yellow‐23 (AY), an anionic dye, from aqueous solutions was determined. NHs were prepared by in situ formation of Fe₃O₄ magnetic nanoparticles (MNPs) inside poly(acrylamide‐co‐4‐styrene sulfonic acid sodium salt) (P[AAm‐co‐SSA]) hydrogel matrices. The dye absorption capacity of the magnetic NHs (MNHs) was compared with simple hydrogels (hydrogels or SHs) without the MNPs The prepared hydrogels were characterized by FTIR, XRD, thermogravimetric analysis, high resolution TEM, field emission SEM, and vibrating sample magnetometer measurement. From HRTEM, it was confirmed that the prepared MNPs in hydrogel matrices were in the size range of about 8 to 10 nm. The MNHs showed greater swelling behavior as well as greater removal efficiency of cationic dye from aqueous solutions in comparison to the SHs. With increase of SSA mole percentage, dye removal efficiency was also increased for both types of hydrogels. The present study indicates that the hydrogels containing MNPs can be potentially used as an efficient absorbent material for removal of cationic dyes from waste water. POLYM. ENG. SCI., 56:776–785, 2016. © 2016 Society of Plastics Engineers     

Removal of methylene blue from aqueous solutions by poly(2-acrylamido-2-methylpropane sulfonic acid-co-itaconic acid) hydrogels

In this study, removal of methylene blue (MB) from aqueous solution by poly(AMPS-co-IA) hydrogels was examined by batch equilibration technique. The effects of monomer ratio, concentration of initiator and crosslinker, pH, adsorption time, initial dye concentration and adsorption temperature on the removal of MB were studied. The results show that the removal of MB was highly effected by preparation conditions of hydrogel. The maximum removal was observed at 10/90 IA/AMPS monomer ratio, 1.0% KPS, and 10.0% MBAAm concentrations. Removal of MB was strongly affected by pH. Pseudo-first-order, pseudo-second-order and intraparticle diffusion models were applied. It was concluded that adsorption of MB on hydrogel followed pseudo-second-order kinetics. It was found that the adsorption isotherm of the MB fit Langmuir-type isotherms. From the Langmuir equation, the adsorption capacity was found as 1,000 mg/g for MB dye. Thermodynamic parameters suggest that the adsorption is a typical physical process, spontaneous, and exothermic in nature. Ten adsorption—desorption cycles demonstrated that the hydrogels were suitable for repeated use without considerable change in adsorption capacity. The results revealed that this hydrogels have potential to be used as an adsorbent for the removal of MB from aqueous solution.     

Efficient removal of cationic dyes from aqueous solutions using a modified poly(ethylene terephthalate) fibers adsorbent

ABSTRACT

A novel adsorbent was synthesized through functionalization of glycidyl methacrylate-g-poly(ethylene terephthalate) (GMA-g-PET) fibers with iminodiacetic acid (IDA) to give IDA-GMA-g-PET fibers. This adsorbent was then exploited for the removal of Malachite Green (MG) and Rhodamine B (RB) dyes. MG has shown faster adsorption kinetics and equilibrium was attained in 15 mins. and 90 mins. for MG and RB, respectively. IDA-GMA-g-PET fibers showed 100% removal efficiency for MG and RB dyes from the solutions having initial concentrations of 300 mg L^?1and 200 mg L^?1, respectively. Desorption conditions of dyes and reusability of the fibers were also investigated.     

Removal of cobalt ions from aqueous solutions by using poly(N,N‐dimethylaminopropyl methacrylamide/itaconic acid) hydrogels

In this study, N,N‐dimethylaminopropyl methacrylamide (DMAPMAm) homopolymer and DMAPMAm/itaconic acid (DMAPMAm/IA) copolymers were obtained from ⁶⁰Co‐γ radiation polymerization. Gel fraction and percentage of swelling values were calculated through gravimetrical calculations. In order to increase the swelling of the hydrogel, the amount of IA in initial copolymer composition was gradually increased, but it was observed that gelation values were low. The structural and morphological assessments of homopolymer and copolymers were made by means of several techniques including Fourier Transform Infrared Spectroscopy (FT‐IR), Scanning Electron Microscopy (SEM), and Energy‐Dispersive X‐ray Spectroscopy (EDS). The cobalt ion (Co²⁺) removal capacities of hydrogel were investigated by taking into account of the initial metal ion concentration and pH of aqueous medium. When it came to the maximum capacity of values obtained from adsorption experiments by using Co²⁺ solutions at pH 5, they changed between 220 and 245 mg Co²⁺/g dry hydrogel. FT‐IR, SEM, EDS, and XRD analyses were carried out for enlightening the mechanism of Co²⁺ removal by hydrogels after the completion of adsorption. Also, desorption studies were conducted using ethylenediaminetetraacetic acid (EDTA). Finally, within approximately 5 days, all adsorbed Co²⁺ ions were released from hydrogels at pH 5 using 0.1M EDTA solution. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39569.     

Synthesis of porous poly(hydroxamic acid) from poly(ethyl acrylate-co-divinylbenzene)

Summary Porous poly(hydroxamic acid) resins were prepared by suspension polymerization of poly(ethyl acrylate-co-divinylbenzene) followed by the reaction with hydroxylamine via nucleophilic substitution. Various degree of dilution and crosslinking ratio were applied to obtain suitable material for use as a chelating polymer. The effects of degree of dilution and crosslinking ratio on the surface morphology, hydroxamic acid group content, and apparent density were investigated in detail.     

Adsorption behavior of reactive dyes from aqueous solutions on chitosan

The capability of the use of chitosan for removing vinyl sulfone and chlorotriazine reactive dyes from aqueous solutions was examined, including equilibrium and dynamic studies. Experiments were performed as a function of dye concentration, and the amount and particle size of chitosan. It was shown that the adsorption capacities of chitosan were comparatively high for the three investigated dyes. The equilibrium data could be best fitted by the Redlich–Peterson equation over the entire concentration range (50–500 g m⁻³). A comparison of the adsorption capacity among such adsorbents as chitin and powdered activated carbon was made. Two rate parameters were finally obtained to describe the adsorption process on a quantitative basis. These parameters could be well correlated to the amount and particle size of dry chitosan. ©1997 SCI     

Removal of basic dyes from aqueous solutions by crosslinked‐acrylic acid/acrylamidopropane sulfonic acid hydrogels

In this study, Acrylic acid (AA)/2‐acrylamido‐2‐methlypropane sulfonic acid (AMPS) hydrogels were prepared by free radical polymerization in aqueous solutions of AA, AMPS, and N,N‐methylenebisacrylamide (NMBA) as crosslinker. Potassium persulfate (PPS)/potassium bisulfide (PBS) were used as initiator and accelerator pair. The water absorption capacities and dye adsorption properties of the hydrogels were investigated. Adsorption properties of the hydrogels were evaluated by depending on different adsorption conditions such as different initial dye concentration and contact time. The concentrations of the dyes were determined using UV/Vis Spectrophotometer at wavelength 530 nm for safranine T (ST) and 622 nm for brilliant cresyl blue (BCB). Adsorption kinetic studies showed that pseudo‐first order kinetic model is suitable to explain the adsorption kinetic data of the hydrogels. Langmuir and Freundlich isotherm models were used to describe adsorption data. The result revealed that the adsorption of basic dyes onto hydrogels fit very well both Langmuir and Freundlich isotherms. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Adsorption of hexavalent chromium from aqueous solutions using 4-vinyl pyridine grafted poly(ethylene terephthalate) fibers

Summary Sorption of hexavalent chromium ions from aqueous solution by 4- vinyl pyridine (4-VP) grafted poly(ethylene terephthalate) (PET) fibers was studied. The Influences of adsorption time, pH of solution and Cr(VI) concentration on the adsorbed amount were investigated. 30 minutes of treatment time was found to be sufficient to reach equilibrium. pH 3.0 was found as the optimum pH value in the process. The maximum adsorption capacity of the material (k_s) was found to be 263.16 mg g^-1. It was found that the reactive fibers are stable and regenerable by acid or base without losing their activity.     

Adsorption of metal cations from aqueous solutions onto the pH responsive poly(vinylidene fluoride grafted poly(acrylic acid) (PVDF-PAA) membrane

This study investigated the influence of pH of adsorption medium and co-adsorptive metal cations for the adsorption of potassium (K⁺) and magnesium (Mg²⁺) ions onto poly (vinylidene fluoride) grafted poly(acrylic acid) (PAA-PVDF) membrane. At pH 4.8, the adsorption of potassium and magnesium was minimal, because of nearly non-dissociated carboxylic acid groups of PAA-chains, but adsorption increased with increasing ion concentration. The interaction of the studied cations between PVDF-PAA membranes increased considerably at pH 7.0 the dissociation of carboxylic acid groups of PAA. The addition of ionic substances (calcium (Ca²⁺) and sodium (Na⁺) to the adsorption medium reduced the adsorption of potassium and magnesium onto the membrane, because of co-adsorption. Divalent calcium reduced more effectively than univalent sodium the adsorption of potassium and magnesium onto the membrane. In conclusion, co-adsorbing ions reduced the adsorbed amount of potassium and magnesium ions due to binding competition. The percentual adsorbed values suggest that adsorption affinity of studied ions onto the PVDF-PAA membrane followed the order Na⁺ < K⁺ < Mg²⁺ < Ca²⁺. The effect of metal cations on drug adsorption from biological fluids needs research in the future, because e.g. PVDF-PAA membrane has been used in drug separation processes.     

Adsorption of reactive dyes from aqueous solutions by layered double hydroxides

BACKGROUND: Water‐soluble reactive azo dyes are the most problematic dye house effluents, as they tend to pass through conventional treatment systems unaffected. The release of these compounds into the environment is undesirable and their removal becomes environmentally important. In this work, synthesis, characterization and sorption properties of hydotalcite‐like compounds (Mg/Al and Mg/Fe), calcined and uncalcined, were investigated for the removal of the reactive azo dye Remazol Red 3BS. RESULTS: The calcined compounds present higher surface area than the uncalcined. The optimum pH for sorption was found to be 6. Thermodynamic analysis reveals that the sorption is spontaneous and endothermic. Equilibrium data were fitted by a Langmuir model, and kinetic data by a second‐order model. The calcined Mg/Al compound showed the highest sorption capacity, at 0.125 mmol g^?1. Regeneration of dye loaded derivative is achieved using the surfactant SDS. CONCLUSIONS: The prepared hydotalcite‐like compounds and especially calcined Mg‐Al exhibited significant adsorption capacity, kinetics, and regenerative ability. Its potential applicability as sorbent should be tested in a large‐scale implementation. Copyright © 2011 Society of Chemical Industry     

Utilization of polyampholyte hydrogels for simultaneous removal of textile dyes from aqueous solutions

The study aimed to create hydrogel structures with greater functionality, otherwise known as polyampholytes (PAHs), and to use these in simultaneous removal studies for remazol-type dyes found in environmental waste waters. Adsorption studies were accomplished at 20°C and 35°C, indicated that adsorption process was exothermic in nature. The Q_m values for the PAH-dye systems were in the interval 111–122 mg dye/g PAH with Ads% from 94% to 98%. The ability of PAH hydrogels to adsorb two different species of dye molecules at the same time is an advantage of PAH adsorbents compared to other hydrogel adsorbents prepared in this area.     

Removal of anionic dyes from aqueous solution using poly [N-vinyl pyrrolidone/2-(methacryloyloxyethyl) trimethyl ammonium chloride] superswelling hydrogels

Summary A superswelling poly [N-vinyl pyrrolidone/2-(methacryloyloxyethyl)trimethyl ammonium chloride], poly(NVP/METAC) hydrogels were prepared by free radical polymerization using ethylene glycol dimethacrylate as crosslinker. The hydrogels were characterized by FT-IR spectroscopy and their surface morphology was determined using Scanning Electron Microscope (SEM). The influence of feed composition of both the monomers and crosslinker on equilibrium swelling and dye adsorption properties of the hydrogels were examined. The equilibrium swelling ratio and binding ratio of the hydrogel/dye systems greatly depends on the METAC and crosslinker concentration in the gels. The effects of pH of the medium and initial dye concentration on the adsorption were also studied. The binding ratio of the hydrogel/dye system increases in the following order: OR-II>RO-14>RO-13.     

New sorbent hydrogels for removal of acidic dyes and metal ions from aqueous solutions

Summary Poly(N-hydroxymethylacrylamide), PHMA, hydrogels were prepared by using N-hydroxymethylacrylamide, HMA, monomer and polyethyleneglycol(400)diacrylate as a crosslinking agent in aqueous medium and then amine groups were incorporated onto PHMA hydrogels by amination reaction with different diamines. The obtained hydrogels were characterized by determination of amine value, hydroxymethyl group content and FTIR spectra. The amine value of hydrogels changed from 2.23 to 4.64 mmol/g by depending on the amine compounds used in amination reaction. Their swelling degree increased at acidic pH values and they showed pH dependent swelling behaviour. They were used as sorbent for removal of indigo carmine and Cu(II) ion, as a model dye molecule and metal ion, respectively, from aqueous solutions. The adsorption properties of the hydrogels were investigated by depending on pH, time and initial indigo carmine or Cu(II) ion concentration. It was seen that the amine group incorporated hydrogels have quite high adsorption rate and adsorption capacity, and their adsorption capacities changed with pH of the solution. Langmuir isotherm model was the best fit for adsorption of both indigo carmine and Cu (II) ion.     

Removal of basic dyes from aqueous solutions using natural clay

Adsorption properties of natural clay (from Eski?ehir of Turkey) were investigated by depending on different adsorption conditions such as different initial dye concentrations and contact times. The chemical composition of the natural clay was analyzed by X-ray fluorescence spectrometry (XRF). The removal of basic dyes such as Nile Blue (NB) and Brilliant Cresyl Blue (BCB) from aqueous solutions using natural clay in this study was described. After the equilibrium adsorption time of 8 h, the adsorption capacities for NB and BCB reach about 25 mg/g and 42 mg/g, respectively. Lagergren kinetic equation was used to test the experimental data to examine the controlling mechanism of adsorption processes. Adsorption data of the BCB and NB onto natural clay were fitted well by the pseudo-first-order model. The adsorption isotherms data were correlated with the Freundlich equation and the Freundlich constants K_f (mg/g) and n (intensity of adsorption) were calculated. The r² (regression coefficients) values were 0.9835 and 0.9849 for NB and BCB, respectively. The adsorption capacities of natural clay for NB and BCB have the following order: BCB > NB.     

Adsorption of toluene from aqueous solutions using clay-based nanostructures

In this study, porous clay heterostructures (PCH) are synthesized through gallery template approach and characterized using X-ray diffraction (XRD), Fourier Transform Infrared Spectroscopy (FTIR), and Nitrogen adsorption–desorption techniques. Batch adsorption studies are conducted to investigate the effect of parameters such as adsorbent dosage, pH, concentration, and contact time on adsorption of toluene by PCH in aqueous solutions. Equilibrium data were fitted to the Langmuir and Freundlich models. Based on the results, by increasing the PCH dosage from 0.5 g/L to 4 g/L, toluene removal is enhanced from 34% to 88.1%.     

Adsorption of basic dyes from model aqueous solutions onto novel spherical silica support

Removal of CI Basic Blue 9 or CI Basic Red 5 from model aqueous solutions has been studied with spherical silica precipitated in an emulsion system used as an adsorbent. The process of removal of the dye impurities has been studied for the dyes in a wide range of concentrations (50–2000 mg dm⁻³) in model systems. The degree of dye adsorption, chemical stability of the pigments obtained and their detailed physicochemical and morphological characterisation have been ascertained. In particular, the dye removal method proposed has been found to be highly effective in removing CI Basic Blue 9 (99.9%). The degree of dye extraction from the silica (SiO₂) surface at the dye concentration in the model solutions in the range 1000–2000 mg dm⁻³ did not exceed 1.0%. The pigment composites produced are characterised by high uniformity of the particles (polydispersity index = 0.005) with the diameters ranging from 360 to 510 nm. The pigment particles are spherical in shape and of intense blue or red colour.     

Adsorption of Hg(II) ions from aqueous chloride solutions using powdered activated carbons

Activated carbons were developed from Casurina equisetifolia leaves, by chemically treating with sulfuric acid (1:1) or zinc chloride (25%), at low (425 °C) and high (825 °C) temperatures. The resulting powdered activated carbons were applied for removing mercuric ions from aqueous solution at different agitation times and mercuric ion concentrations. The equilibrium data fitted well the Langmuir adsorption isotherm. The Langmuir adsorption capacities were 12.3 and 20.3 mg g⁻¹ for low temperature carbons and 43.9 and 38.5 mg g⁻¹ for high temperature carbons impregnated with H₂SO₄ and ZnCl₂, respectively. Studies of the effects of carbon dosage, NaCl concentrations and solution pH values were carried out for the more effective, high temperature carbons. Increasing NaCl concentration resulted in a significant decrease in the adsorption efficiency. Adsorption was high from solutions with low and neutral pH values and lower for solutions with alkaline pH values for the high temperature carbons.     

Removal of nitrite ions from aqueous solutions by poly(N,N‐dimethylamino ethylmethacrylate) hydrogels

Removal of nitrite ions from aqueous solutions by protonated poly(N,N‐dimethylamino ethylmethacrylate) hydrogels (P(DMAEMA)) was investigated. We have shown that polycationic and pendant secondary amine group containing P(DMAEMA) hydogels is very efficient and highly selective for the removal of nitrite ions from aqueous solutions at even in very high concentrations. Adsorption studies have shown that pH of the nitrite solution has influence on the nitrite ion uptake capacity of P(DMAEMA) hydrogels. The adsorption capacity of hydrogels had been increased up to 3100 mg NO/g dry gel, by changing pH of the solution. The results of the adsorption studies showed that the interaction between nitrite ions and quaternized amine groups agree with the Langmuir‐type isotherm. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 6023–6027, 2006