Synthesis of Closo-1,7-Carboranyl Alkyl Amines

Of the three closo-carborane isomers (C₂B₁₀H₁₂), closo-1,2-carborane has been used most widely in the synthesis of carboranyl amines. However, closo-1,2-carboranes are prone to deboronation to nido-7,8-carborane under various conditions including attack by basic amino groups. In order to overcome this problem, closo-1,7-carboranyl ethyl-, propyl-, and butylamine were synthesized, which should be more stable towards basic deboronation than their closo-1,2-carboranyl counterparts. These closo-1,7-carboranyl amines (5, 18 and 19) were synthesized using two different methods, both starting from the corresponding closo-1,7-carboranyl alkyl iodides (3, 14 and 15). One of the carboranyl alkyl amine (5) was conjugated with folic acid to form a closo-1,7-carborane-folic acid bioconjugate (20).     

Solid-state supramolecular array through cooperative π-π interactions of 1-(2-methoxyphenyl)-o-carborane

Dicarba-closo-dodecaborane (carborane) has received much attention as a building block for supramolecular assemblies and bioactive compounds. Among the carborane isomers, 1,2-dicarba-closo-dodecaborane (o-carborane) has unique chemical properties, including the ability of the o-carborane C-H hydrogens to form H-bonds. We have designed and synthesized 1-(2-methoxyphenyl)-o-carborane 1a to study its ability to form an intramolecular H-bond between the o-carborane C-H hydrogen and various H-bond acceptors both in solution and in the solid state. Intramolecular H-bonding ability in solution was evaluated by means of ¹H NMR spectroscopic measurements of the C-H hydrogen signal. The signal of the C-H hydrogen of 1a showed a remarkable downfield shift in CDCl₃ and various other solvents, i.e., the shift was almost solvent-independent. We suggest that 1a forms an intramolecular H-bond in these solvents. Crystal structure analysis of 1a showed a C-H?O distance of 2.05 Å and a nearly planar torsion angle C(2)-C(1)-C(7)-C(8) of 6.5°, indicating intramolecular C-H?O H-bond formation in the solid state. The crystal packing of 1a indicates that a supramolecular array is stabilized by cooperative π-π stacking interactions among the methoxyphenyl groups and by hydrophobic interactions of the o-carborane cages. DFT calculations indicate that the strength of the intramolecular H-bond of 1a is about 3.53 kcal/mol. These observations indicate the potential value of o-carborane in supramolecular chemistry and materials chemistry; it should be possible to design novel materials by utilizing both the H-bonding ability of the o-carborane C-H hydrogen and the high hydrophobicity of the o-carborane cage.     

Synthesis of carboxylic acids based on the closo-decaborate anion

A series of new boron-containing carboxylic acids was prepared by the ring-opening reaction of cyclic oxonium derivatives of the closo-decaborate anion [B₁₀H₁₀]²⁻ with methyl esters of hydroxybenzoic acids or the cyanide anion followed by hydrolysis of the obtained nitrile and esters. Acid hydrolysis of the esters results in protonation of the oxygen atom connected to the boron cage, with the formation of the corresponding O-protonated acids, isolated in the solid state. The compounds synthesized can be used in radionuclide diagnostics and boron neutron capture therapy of cancer.     

Ethynylmonocarba-closo-dodecaborates: M[12-HCC-closo-1-CB11H11] and M[7,12-(HCC)2-closo-1-CB11H10] (M = Cs, [Et4N])

Cesium and tetraethylammonium salts of the ethynyl functionalized monocarba-closo-dodecaborate anions [12-HCC-closo-1-CB₁₁H₁₁]⁻ and [7,12-(HCC)₂-closo-1-CB₁₁H₁₀]⁻ were obtained by desilylation of [Et₄N][12-Me₃SiCC-closo-1-CB₁₁H₁₁] and [Et₄N][7,12-(Me₃SiCC)₂-closo-1-CB₁₁H₁₀], respectively. Their thermal properties were examined by differential scanning calorimetry. The compounds were characterized by multi-NMR, IR, and Raman spectroscopy, (−)-MALDI mass spectrometry, and elemental analysis. Single-crystals of Cs[12-HCC-closo-1-CB₁₁H₁₁] and [Et₄N][7,12-(HCC)₂-closo-1-CB₁₁H₁₀] were studied by X-ray diffraction. The discussion of the spectroscopic and structural properties is supported by data derived from theoretical calculations using density functional theory as well as perturbation theory.     

Alpha selective epoxide opening with F: synthesis of 4-(3-[F]fluoro-2-hydroxypropoxy)benzaldehyde ([F]FPB) for peptide labeling

Strained tricyclic ring systems such as epoxides are rarely used as precursors for the introduction of anionic fluorine-18 into organic compounds intended for positron emission tomography (PET). Here we report the alpha selective ring opening of epoxides for the introduction of fluorine-18 into small as well as larger biomolecules via 1- and 2-step protocols. [¹⁸F]fluoromisonidazole ([¹⁸F]MISO), a tracer for hypoxia imaging, and the tumor targeting peptide Tyr³-octreotate (TATE) were radiolabeled using epoxide opening reactions. In the latter case, the new prosthetic labeling synthon 4-(3-[¹⁸F]fluoro-2-hydroxypropoxy)benzaldehyde ([¹⁸F]FPB) has been used for ¹⁸F-introduction.     

The synthesis of functional derivatives of the [1-CB9H10] anion by Brellochs reaction

Reactions of decaborane with various aldehydes in alkaline media were studied. The reactions with HCOH and 2-MeOC₆H₄CHO give the corresponding arachno-carboranes [6-R-arachno-CB₉H₁₃]⁻ (R = H, C₆H₄-2-OMe), whereas the reactions with C₆H₅CHO, 4-BrC₆H₄CHO, 4-MeCONHC₆H₄CHO, and 2-SC₄H₃CHO result in the nido-carboranes [6-R-nido-CB₉H₁₁]⁻ (R = C₆H₅, C₆H₄-4-Br, C₆H₄-4-NHCOMe, 2-SC₄H₃). Both the arachno- and nido-carboranes can be easily oxidized with elemental iodine in an alkaline aqueous solution giving the corresponding closo-derivatives [2-R-closo-2-CB₉H₉]⁻. These closo-2-isomers, under heating in solution, undergo rearrangement to more thermodynamically favorable closo-1-isomers [1-R-closo-1-CB₉H₉]⁻. The structure of (Bu₄N)[1-(4-BrC₆H₄)-1-CB₉H₉] was determined using single crystal X-ray diffraction.     

Synthesis of peptide conjugated chelator oligomers for endoradiotherapy and MRT imaging

The clinical impact of peptides that accumulate in tumours is determined by the number of particle emitting or paramagnetic isotopes attached. Therefore, attempts should be made to increase the cargo capacity of the peptide carriers. A general synthetic route to conjugates is described that allows insertion of multiple DOTA (1,4,7,10-tetraazacyclododecane-N′,N″,N^?,N?-tetraacetic acid) moieties at the N-terminal end of the cyclic peptide Tyr³-octreotate. The peptide moiety was assembled by Fmoc solid phase synthesis and oxidised to form the cyclic disulfide. Subsequently, the required number of DOTA-tris tert-butyl ester chelating units were attached to the side chains of lysines. The conjugates were purified and thoroughly studied by RP-HPLC, size exclusion HPLC and mass spectrometry. The labelling of the novel conjugates and of DOTA⁰-Tyr³-octreotate (DOTATATE) was exemplified for ⁹⁰Y and ¹¹¹In. The methodology described here allows the versatile introduction of multiple DOTA chelates into a peptide sequence, thus, introducing a new scope to the receptor affine peptides that can be synthesised using solid phase synthesis.     

NMR study of 1-aryl-1,2-dicarba-closo-dodecaboranes: intramolecular C-H?O hydrogen bonding in solution

Dicarba-closo-dodecaborane(12) (carborane) has recently received much attention as a building block for supramolecular assemblies and bioactive compounds. Among carborane isomers, 1,2-dicarba-closo-dodecaborane(12) (o-carborane) has unique chemical properties, including the ability of the o-carborane C-H hydrogens to form hydrogen bonds. To evaluate intramolecular hydrogen bond formation between the o-carborane C-H hydrogen and various hydrogen bond acceptors in solution, we have designed and synthesized 1-aryl-o-carboranes 2. Intramolecular hydrogen bonding ability was evaluated by means of ¹H NMR measurement of the o-carborane C-H hydrogen signal of 2. The 1-(2-methoxyphenyl)-o-carborane derivative 2m appeared to form an intramolecular hydrogen bond between o-carborane C-H hydrogen and the oxygen atom acting as a hydrogen bonding acceptor. In this study, we present evidence for hydrogen bond formation in solution between the o-carborane C-H and hydrogen bond acceptors positioned with appropriate geometry.     

Effect of boron non-stoichiometry on B-site in perovskite type structure ScBxRh3 and CeBxRh3 on charges of atoms on A-site: study by X-ray photoelectron and nuclear magnetic resonance spectroscopies

The solid solutions of ScBRh₃-ScRh₃ and CeBRh₃-CeRh₃ are synthesized by the arc melting method, where RBRh₃ and RRh₃ (R=rare earth element) have perovskite and AuCu₃ type structures, respectively. The binding energy of Sc 2p_3/2 for ScB_xRh₃ increases with the boron concentration. The Knight shift of ⁴⁵Sc observed by nuclear magnetic resonance spectroscopy decreases with increase of boron concentration. The decrement of the Knight shift corresponds the Sc 4s electron density at the Fermi level. The intensity ratio of f²: f¹: f⁰ of Ce 3d XPS spectrum changes with boron concentration of CeB_xRh₃. It is concluded that in both cases of ScB_xRh₃ and CeB_xRh₃ the charge on the atoms on A-site changes with the concentration of the atoms on B-site, where the atoms are not directly bound.     

Synthesis of D2 receptor ligand analogs incorporating one dicarba-closo-dodecaborane unit

Boron clusters, and especially dicarba-closo-dodecaboranes, can be used as hydrophobic pharmacophores in the design of new drugs and radiotracers. In the current Letter, analogs of enantiomeric substituted benzamides (Raclopride and FLB-457) in which the phenyl ring has been substituted by a carborane cage (either orto- or meta-carborane) have been developed as potential D₂ receptor antagonists. The formation of intramolecular hydrogen bonds (in solution) and the stability of the new chemical entities have been evaluated by means of ¹H NMR and HPLC-MS, respectively.     

Structural studies in the BaO-B2O3-TiO2 system by XAS and B-NMR

The structure of barium-titanium-metaborate xBaO-xB₂O₃-yTiO₂ (y=0%, 4%, 8%, 16% and x=50-y/2) amorphous and crystallized powders, obtained using a polymeric precursor method, was investigated by Ti and B K-edge X-ray absorption spectroscopy (XAS) and ¹¹B-NMR high-resolution techniques. XANES study of amorphous samples shows that Ti⁴⁺ ions exist as ^[4]Ti species associated to ^[6]Ti and ^[5]Ti species in a practically equivalent amount. After crystallization, titanium environment is predominately composed by ^[6]Ti species. According to XANES results obtained at the B K-edge, the fraction of boron in tetrahedral sites (^[4]B) reduces as the amount of TiO₂ is increased from x=0% to 4%, with a consequent increase of boron in trigonal sites (^[3]B). By a combination of ¹¹B-NMR spin-echo and triple quantum magic angle spinning (3Q-MAS) techniques, the detailed borate speciation was determined as consisting in ^[4]B and two kind of trigonal sites, ^[3]B_A and ^[3]B_B, corresponding, respectively, to borates sharing three and two O atoms with other boron units. NMR results reveal not only the reduction in boron coordination also seen by XANES but also the simultaneous reduction in the condensation degree of trigonal units, when the Ti content is increased in the glass. In crystallized samples, β-BaB₂O₄ and BaTi(BO₃)₂ phases were identified and quantified by ¹¹B-NMR.     

Synthesis of the 1-hydroxy-closo-decaborate anion [1-B10H9OH]

Reactions of the diazonium derivative of closo-decaborate anion with oxygen nucleophiles were studied. The reaction of [1-B₁₀H₉N₂]⁻ with hydroxide ion gives the corresponding hydroxy derivative [1-B₁₀H₉OH]²⁻ in high yield. The reactions with OR (R = Me, Et, i-Pr, Ph) result in mixture of [1-B₁₀H₉OR]²⁻ and [a²-B₂₀H₁₈]⁴⁻.     

Rapid and high-yield solution-phase synthesis of DOTA-Tyr-octreotide and DOTA-Tyr-octreotate using unprotected DOTA

An improved method for the solution-phase derivatization of Tyr³-Lys⁵(Dde)-octreotide (TOC(Dde)) and Tyr³-Lys⁵(Dde)-octreotate (TATE(Dde)) with the macrocyclic chelator DOTA (1,4,7,10-tetraazacyclododecane-N′,N″,N?,N?-tetraacetic acid) has been developed. The fully protected parent peptides were assembled via solid-phase peptide synthesis (SPPS) using Fmoc-strategy. After cleavage from the solid support, disulfide bond formation was carried out using H₂O₂. Both TOC(Dde) and TATE(Dde) were successfully coupled with DOTA in the presence of NHS, EDCI and DIPEA in a water/DMF solvent system. Yields of the coupling reaction were >98% within only 2 h with no detectable formation of sideproducts. This method for the preparation of DOTATOC, DOTATATE and other DOTA-peptide conjugates is therefore a rapid and economic alternative to the currently used methods.     

Reactions of oxonium derivatives of [B12H12] with sulphur nucleophiles. Synthesis of novel B12-based mercaptanes, sulfides and nucleosides

Cleavage of oxonium derivatives of [B₁₂H₁₂]²⁻ by various S-nucleophiles was studied. Reactions of tetrabutylammonium 1-tetramethylene-(3-oxa)-oxonium-closo-undecahydrododecaborate with thiourea and a series of thiols resulted in novel B₁₂-based mercaptane, aliphatic, aromatic and heteroaromatic sulfides with high yields under mild conditions. This approach was also used for the preparation of novel guanosine derivative of [B₁₂H₁₂]²⁻.     

Experimental and theoretical studies on group 1 metallacarboranes: Synthesis, structure and ab initio calculations of the NMR chemical shifts of the 1-(THF)-1-(TMEDA)-1-Na-2,4-(SiMe3)2-2,4-C2B4H5 and related carboranes

The reaction of gaseous HCl with either the disodium or dilithium compound of the [nido-2,4-(SiMe₃)₂-2,4-C₂B₄H₄]²⁻ dianion (I) in 1:1 stoichiometry in THF produced the monoprotonated species 1-Na(THF)₂-2,4-(SiMe₃)₂-2,4-C₂B₄H₅ (II) or 1-Li(THF)₂-2,4-(SiMe₃)₂-2,4-C₂B₄H₅ (III), in 81% and 80% yields, respectively. This method proved superior to that involving the direct reduction of the closo-C₂B₄ carborane by metal hydrides. II and III were characterized by elemental analysis, ¹H, ¹¹B and ¹³C NMR and IR spectra. Compound II was recrystallized from a mixture THF, hexane and TMEDA (1:2:1) to isolate colorless crystals of the mixed solvated species, 1-(THF)-1-(TMEDA)-1-Na-2,4-(SiMe₃)₂-2,4-C₂B₄H₅ (IV), which were subsequently used for X-ray diffraction studies. The structure of IV showed that the capping metal occupied the apical position above the open C₂B₃ face of the carborane and that a hydrogen atom was bridging the two adjacent boron atoms on that face. The ¹¹B and ¹³C NMR spectra calculated by GIAO (gauge independent atomic orbital) methods at the 6-311G^** level on the B3LYP/6-31G^* optimized geometries of I–III, and a number of related nido- and closo-carboranes, gave excellent agreement with experiment, even in compounds where electron correlation effects are known to be important.     

Non-random cation distribution in hexagonal Al0.5Ga0.5PO4

Based on powder X-ray diffraction and ³¹P Magic Angle Spinning Nuclear Magnetic Resonance (MAS NMR) investigations of mixed phosphate Al_0.5Ga_0.5PO₄, prepared by co-precipitation method followed by annealing at 900 °C for 24 h, it is shown that Al_0.5Ga_0.5PO₄ phase crystallizes in hexagonal form with lattice parameter a=0.491(2) and c=1.106(4) nm. This hexagonal phase of Al_0.5Ga_0.5PO₄ is similar to that of pure GaPO₄. The ³¹P MAS NMR spectrum of the mixed phosphate sample consists of five peaks with systematic variation of their chemical shift values and is arising due to existence of P structural units having varying number of the Al³⁺/Ga³⁺ cations as the next nearest neighbors in the solid solution. Based on the intensity analysis of the component NMR spectra of Al_0.5Ga_0.5PO₄, it is inferred that the distribution of Al³⁺ and Ga³⁺ cations is non-random for the hexagonal Al_0.5Ga_0.5PO₄ sample although XRD patterns showed a well-defined solid solution formation.     

N-arylammonio- and N-pyridinium-substituted derivatives of dodecahydro-closo-dodecaborate(2-)

We report two methods for preparing N-arylammonio, N-pyridyl and N-arylamino dodecaborates: heating of the tetrabutylammonium salt of dodecahydro-closo-dodecaborate(2-) with aryl and pyridyl amines, or nucleophilic attack of [closo-B₁₂H₁₁NH₂]²⁻ on a strongly deactivated aromatic system. With aryl amines we obtained [1-closo-B₁₂H₁₁N(R¹)₂C₆H₅]⁻ (R¹ = H, CH₃). With 4-(dimethylamino)pyridine, [1-closo-(B₁₂H₁₁NC₅H₄)-4-N(CH₃)₂]⁻, with a bond between the boron and the pyridinium nitrogen, was obtained. A presumable mechanism for this kind of reactions is reported. By nucleophilic substitution, two products, [1-closo-(B₁₂H₁₁NHC₆H₃)-3,4-(CN)₂]²⁻ and [1-closo-(B₁₂H₁₁NHC₆H₂)-2-(NO₂)-4,5-(CN)₂]²⁻, were formed with 4-nitrophthalonitrile and 1-chloro-2,4-dinitrobenzene gave [1-closo-(B₁₂H₁₁NHC₆H₃)-2,4-(NO₂)₂]²⁻. For [1-closo-B₁₂H₁₁N(CH₃)₂C₆H₅]⁻ and [1-closo-(B₁₂H₁₁NHC₆H₃)-2,4-(NO₂)₂]²⁻ single crystal X-ray structures were obtained.     

Effects of partial anion substitution on the thermoelectric properties of silver(I) chalcogenide halides in the system Ag5Q2X with Q=Te, Se and S and X=Br and Cl

A selection of mixed conducting silver chalcogenide halides of the general formula Ag₅Q₂X with Q=sulfur, selenium and tellurium and X=chlorine and bromine has been investigated due to their thermoelectric properties. Recently, the ternary counterpart Ag₅Te₂Cl showed a defined d¹⁰-d¹⁰ interaction in the disordered cation substructure at elevated temperatures where Ag₅Te₂Cl is present in its high temperature α-phase. A significant drop of the thermal diffusivity has been observed during the β−α phase transition reducing the values from 0.12 close to 0.08 mm² s⁻¹. At the same transition the thermopower reacts on the increasing silver mobility and jumps towards less negative values.Thermal conductivities, thermopower and thermal diffusivity of selected compounds with various grades of anion substitution in Ag₅Q₂X were determined around the silver-order/disorder β−α phase transition. A formation of attractive interactions could be observed for selenium substituted phases while no effect was detected for bromide and sulfide samples. Depending on the grade and type of substitution the thermopower changes significantly at and after the β−α phase transition. Thermal conductivities are low reaching values around 0.2-0.3 W m⁻¹ K⁻¹ at 299 K. Partial anion exchange can substantially tune the thermoelectric properties in Ag₅Q₂X phases.     

Role of crystallite size on the photoluminescence properties of SrIn2O4:Eu phosphor synthesized by different methods

Photoluminescence (PL) of Eu³⁺ was studied in SrIn₂O₄ host lattice. A complete solid solubility of Eu³⁺ has been found in the series SrIn_2−xEu_xO₄ [x=0-2.0]. The phase formation at a relatively low temperature and in a very short duration was achieved by combustion synthesis (CS). Concentration quenching of luminescence has been observed in SrIn_2−xEu_xO₄ [x=0.1-2.0] and the critical concentration for maximum emission was found to be with x=0.3. In order to find the role of crystallite size on the PL properties of SrIn₂O₄:Eu³⁺, the results obtained with phosphors synthesized by solid state reaction (SSR) and CS methods were compared.