Highly Efficient,Stable, and Ductile Ternary Nonfullerene Organic Solar Cells from a Two‐Donor Polymer Blend

Organic solar cells (OSCs) are one of the most promising cost‐effective options for utilizing solar energy, and, while the field of OSCs has progressed rapidly in device performance in the past few years, the stability of nonfullerene OSCs has received less attention. Developing devices with both high performance and long‐term stability remains challenging, particularly if the material choice is restricted by roll‐to‐roll and benign solvent processing requirements and desirable mechanical durability. Building upon the ink (toluene:FTAZ:IT‐M) that broke the 10% benchmark when blade‐coated in air, a second donor material (PBDB‐T) is introduced to stabilize and enhance performance with power conversion efficiency over 13% while keeping toluene as the solvent. More importantly, the ternary OSCs exhibit excellent thermal stability and storage stability while retaining high ductility. The excellent performance and stability are mainly attributed to the inhibition of the crystallization of nonfullerene small‐molecular acceptors (SMAs) by introducing a stiff donor that also shows low miscibility with the nonfullerene SMA and a slightly higher highest occupied molecular orbital (HOMO) than the host polymer. The study indicates that improved stability and performance can be achieved in a synergistic way without significant embrittlement, which will accelerate the future development and application of nonfullerene OSCs.     

Environmentally Friendly Solvent‐Processed Organic Solar Cells that are Highly Efficient and Adaptable for the Blade‐Coating Method

The power conversion efficiencies (PCEs) of state‐of‐the‐art organic solar cells (OSCs) have increased to over 13%. However, the most commonly used solvents for making the solutions of photoactive materials and the coating methods used in laboratories are not adaptable for future practical production. Therefore, taking a solution‐coating method with environmentally friendly processing solvents into consideration is critical for the practical utilization of OSC technology. In this study, a highly efficient PBTA‐TF:IT‐M‐based device processed with environmentally friendly solvents, tetrahydrofuran/isopropyl alcohol (THF/IPA) and o‐xylene/1‐phenylnaphthalene, is fabricated; a high PCE of 13.1% can be achieved by adopting the spin‐coating method, which is the top result for OSCs. More importantly, a blade‐coated non‐fullerene OSC processed with THF/IPA is demonstrated for the first time to obtain a promising PCE of 11.7%; even for the THF/IPA‐processed large‐area device (1.0 cm²) made by blade‐coating, a PCE of 10.6% can still be maintained. These results are critical for the large‐scale production of highly efficient OSCs in future studies.     

Single‐Junction Binary‐Blend Nonfullerene Polymer Solar Cells with 12.1% Efficiency

A new fluorinated nonfullerene acceptor, ITIC‐Th1, has been designed and synthesized by introducing fluorine (F) atoms onto the end‐capping group 1,1‐dicyanomethylene‐3‐indanone (IC). On the one hand, incorporation of F would improve intramolecular interaction, enhance the push–pull effect between the donor unit indacenodithieno[3,2‐b]thiophene and the acceptor unit IC due to electron‐withdrawing effect of F, and finally adjust energy levels and reduce bandgap, which is beneficial to light harvesting and enhancing short‐circuit current density (J _SC). On the other hand, incorporation of F would improve intermolecular interactions through C? F···S, C? F···H, and C? F···π noncovalent interactions and enhance electron mobility, which is beneficial to enhancing J _SC and fill factor. Indeed, the results show that fluorinated ITIC‐Th1 exhibits redshifted absorption, smaller optical bandgap, and higher electron mobility than the nonfluorinated ITIC‐Th. Furthermore, nonfullerene organic solar cells (OSCs) based on fluorinated ITIC‐Th1 electron acceptor and a wide‐bandgap polymer donor FTAZ based on benzodithiophene and benzotriazole exhibit power conversion efficiency (PCE) as high as 12.1%, significantly higher than that of nonfluorinated ITIC‐Th (8.88%). The PCE of 12.1% is the highest in fullerene and nonfullerene‐based single‐junction binary‐blend OSCs. Moreover, the OSCs based on FTAZ:ITIC‐Th1 show much better efficiency and better stability than the control devices based on FTAZ:PC₇₁BM (PCE = 5.22%).     

Over 14% Efficiency in Organic Solar Cells Enabled by Chlorinated Nonfullerene Small‐Molecule Acceptors

To make organic solar cells (OSCs) more competitive in the diverse photovoltaic cell technologies, it is very important to demonstrate that OSCs can achieve very good efficiencies and that their cost can be reduced. Here, a pair of nonfullerene small‐molecule acceptors, IT‐2Cl and IT‐4Cl, is designed and synthesized by introducing easy‐synthesis chlorine substituents onto the indacenodithieno[3,2‐b]thiophene units. The unique feature of the large dipole moment of the C? Cl bond enhances the intermolecular charge‐transfer effect between the donor–acceptor structures, and thus expands the absorption and down shifts the molecular energy levels. Meanwhile, the introduction of C? Cl also causes more pronounced molecular stacking, which also helps to expand the absorption spectrum. Both of the designed OSCs devices based on two acceptors can deliver a power conversion efficiency (PCE) greater than 13% when blended with a polymer donor with a low‐lying highest occupied molecular orbital level. In addition, since IT‐2Cl and IT‐4Cl have very good compatibility, a ternary OSC device integrating these two acceptors is also fabricated and obtains a PCE greater than 14%. Chlorination demonstrates effective ability in enhancing the device performance and facile synthesis route, which both deserve further exploitation in the modification of photovoltaic materials.     

Printable MoOx Anode Interlayers for Organic Solar Cells

Currently, solution‐processed MoO_x anode interfacial layers (AILs) can only be fabricated by the spin‐coating method in organic solar cells (OSCs), which severely limits their use in practical productions where large‐area printing techniques are used. Herein, a facile method is demonstrated to prepare highly conductive MoO_x (denoted EG:Mo) that can be processed by printing methods such as wire‐bar and blade coatings. The EG:Mo films are prepared by depositing an aqueous solution containing ammonium heptamolybdate (VI) tetrahydrate (NMo) and ethylene glycol (EG) and annealing at 200 °C. UV–vis absorption and X‐ray photoelectron spectroscopy measurements confirm that Mo (VI) can be reduced to Mo (V) by EG, resulting in the n‐doped EG:Mo. Using the EG:Mo as AILs, an OSC based on a PB3T:IT‐M active layer exhibits a power conversion efficiency (PCE) of 12.1%, which is comparable to that of the PEDOT:PSS modified devices. More importantly, EG:Mo AILs can be processed by wire‐bar and blade‐coating methods, and the corresponding devices show PCEs of 11.9% and 11.5%, respectively. Furthermore, the EG:Mo AIL is processed by wire‐bar coating to fabricate a large area device (1.0 cm²), and a PCE of 10.1% is achieved.     

Blade‐Cast Nonfullerene Organic Solar Cells in Air with Excellent Morphology,Efficiency, and Stability

Blade‐coating serving as a prototype tool for slot‐die coating can be very compatible with large‐area roll‐to‐roll coating. Using blade‐coating in an ambient environment, an average power conversion efficiency (PCE) of 10.03% is achieved in nonfullerene organic solar cells, which is higher than that of the optimal spin‐coated device with a PCE of 9.41%. It is demonstrated that blade‐coating can induce a higher degree of molecular packing for both conjugated polymer donors and small‐molecular acceptors as it helps to produce a seeding film containing numerous crystal grains, subsequently providing nucleation sites for the residual solution when the motion of the blade exposes a liquid front. Due to this effect, blade‐coating can partially replace the role of the additive 1,8‐diiodooctane (DIO) and thus achieves the optimized morphology with fewer additives. Moreover, it is found that the blade‐coated film with 0.25% DIO possesses not only a smaller domain size but also higher domain purity, suggesting more D/A (donor/acceptor) interfaces and a purer phase domain as compared to the spin‐coated film with 1% DIO. Encouragingly, the blade‐coated device with less DIO (0.25%) exhibits much better stability than the spin‐coated device with 1% DIO, showing excellent prospects.     

An Unfused‐Core‐Based Nonfullerene Acceptor Enables High‐Efficiency Organic Solar Cells with Excellent Morphological Stability at High Temperatures

Most nonfullerene acceptors developed so far for high‐performance organic solar cells (OSCs) are designed in planar molecular geometry containing a fused‐ring core. In this work, a new nonfullerene acceptor of DF‐PCIC is synthesized with an unfused‐ring core containing two cyclopentadithiophene (CPDT) moieties and one 2,5‐difluorobenzene (DFB) group. A nearly planar geometry is realized through the F···H noncovalent interaction between CPDT and DFB for DF‐PCIC. After proper optimizations, the OSCs with DF‐PCIC as the acceptor and the polymer PBDB‐T as the donor yield the best power conversion efficiency (PCE) of 10.14% with a high fill factor of 0.72. To the best of our knowledge, this efficiency is among the highest values for the OSCs with nonfullerene acceptors owning unfused‐ring cores. Furthermore, no obvious morphological changes are observed for the thermally treated PBDB‐T:DF‐PCIC blended films, and the relevant devices can keep ≈70% of the original PCEs upon thermal treatment at 180 °C for 12 h. This tolerance of such a high temperature for so long time is rarely reported for fullerene‐free OSCs, which might be due to the unique unfused‐ring core of DF‐PCIC. Therefore, the work provides new idea for the design of new nonfullerene acceptors applicable in commercial OSCs in the future.     

Naphthodithiophene‐Based Nonfullerene Acceptor for High‐Performance Organic Photovoltaics: Effect of Extended Conjugation

Naphtho[1,2‐b:5,6‐b′]dithiophene is extended to a fused octacyclic building block, which is end capped by strong electron‐withdrawing 2‐(5,6‐difluoro‐3‐oxo‐2,3‐dihydro‐1H‐inden‐1‐ylidene)malononitrile to yield a fused‐ring electron acceptor (IOIC2) for organic solar cells (OSCs). Relative to naphthalene‐based IHIC2, naphthodithiophene‐based IOIC2 with a larger π‐conjugation and a stronger electron‐donating core shows a higher lowest unoccupied molecular orbital energy level (IOIC2: ?3.78 eV vs IHIC2: ?3.86 eV), broader absorption with a smaller optical bandgap (IOIC2: 1.55 eV vs IHIC2: 1.66 eV), and a higher electron mobility (IOIC2: 1.0 × 10^?3 cm² V^?1 s^?1 vs IHIC2: 5.0 × 10^?4 cm² V^?1 s^?1). Thus, IOIC2‐based OSCs show higher values in open‐circuit voltage, short‐circuit current density, fill factor, and thereby much higher power conversion efficiency (PCE) values than those of the IHIC2‐based counterpart. In particular, as‐cast OSCs based on FTAZ: IOIC2 yield PCEs of up to 11.2%, higher than that of the control devices based on FTAZ: IHIC2 (7.45%). Furthermore, by using 0.2% 1,8‐diiodooctane as the processing additive, a PCE of 12.3% is achieved from the FTAZ:IOIC2 ‐ based devices, higher than that of the FTAZ:IHIC2 ‐ based devices (7.31%). These results indicate that incorporating extended conjugation into the electron‐donating fused‐ring units in nonfullerene acceptors is a promising strategy for designing high‐performance electron acceptors.     

Balanced Partnership between Donor and Acceptor Components in Nonfullerene Organic Solar Cells with >12% Efficiency

Relative to electron donors for bulk heterojunction organic solar cells (OSCs), electron acceptors that absorb strongly in the visible and even near‐infrared region are less well developed, which hinders the further development of OSCs. Fullerenes as traditional electron acceptors have relatively weak visible absorption and limited electronic tunability, which constrains the optical and electronic properties required of the donor. Here, high‐performance fullerene‐free OSCs based on a combination of a medium‐bandgap polymer donor (FTAZ) and a narrow‐bandgap nonfullerene acceptor (IDIC), which exhibit complementary absorption, matched energy levels, and blend with pure phases on the exciton diffusion length scale, are reported. The single‐junction OSCs based on the FTAZ:IDIC blend exhibit power conversion efficiencies up to 12.5% with a certified value of 12.14%. Transient absorption spectroscopy reveals that exciting either the donor or the acceptor component efficiently generates mobile charges, which do not suffer from recombination to triplet states. Balancing photocurrent generation between the donor and nonfullerene acceptor removes undesirable constraints on the donor imposed by fullerene derivatives, opening a new avenue toward even higher efficiency for OSCs.     

Conjugation‐Curtailing of Benzodithionopyran‐Cored Molecular Acceptor Enables Efficient Air‐Processed Small Molecule Solar Cells

Small molecule solar cells (SMSCs) lag a long way behind polymer solar cells. A key limit is the less controllable morphology of small molecule materials, which can be aggravated when incorporating anisotropic nonfullerene acceptors. To fine‐tune the blending morphology within SMSCs, a π‐conjunction curtailing design is applied, which produces a efficient benzodithionopyran‐cored molecular acceptor for nonfullerene SMSCs (NF‐SMSCs). When blended with a molecular donor BDT3TR‐SF to fabricate NF‐SMSCs, the π‐conjunction curtailed molecular acceptor NBDTP‐M obtains an optimal power conversion efficiency (PCE) of up to 10.23%, which is much higher than that of NBDTTP‐M of longer π‐conjunction. It retains 93% of the PCE of devices fabricated in a glove box when all spin‐coating and post‐treating procedures are conducted in ambient air with relative humidity of 25%, which suggests the good air‐processing capability of π‐conjunction curtailed molecules. Detailed X‐ray scattering investigations indicate that the BDT3TR‐SF:NBDTP‐M blend exhibits a blend morphology featuring fine interpenetrating networks with smaller domains and higher phase purity, which results in more efficient charge generation, more balanced charge transport, and less recombination compared to the low‐performance BDT3TR‐SF:NBDTTP‐M blend. This work provides a guideline for molecular acceptors' design toward efficient, low‐cost, air‐processed NF‐SMSCs.     

High‐Efficiency Nonfullerene Organic Solar Cells with a Parallel Tandem Configuration

In this work, a highly efficient parallel connected tandem solar cell utilizing a nonfullerene acceptor is demonstrated. Guided by optical simulation, each of the active layer thicknesses of subcells are tuned to maximize its light trapping without spending intense effort to match photocurrent. Interestingly, a strong optical microcavity with dual oscillation centers is formed in a back subcell, which further enhances light absorption. The parallel tandem device shows an improved photon‐to‐electron response over the range between 450 and 800 nm, and a high short‐circuit current density (J _SC) of 17.92 mA cm^?2. In addition, the subcells show high fill factors due to reduced recombination loss under diluted light intensity. These merits enable an overall power conversion efficiency (PCE) of >10% for this tandem cell, which represents a ≈15% enhancement compared to the optimal single‐junction device. Further application of the designed parallel tandem configuration to more efficient single‐junction cells enable a PCE of >11%, which is the highest efficiency among all parallel connected organic solar cells (OSCs). This work stresses the importance of employing a parallel tandem configuration for achieving efficient light harvesting in nonfullerene‐based OSCs. It provides a useful strategy for exploring the ultimate performance of organic solar cells.     

All‐Solution‐Processed Metal‐Oxide‐Free Flexible Organic Solar Cells with Over 10% Efficiency

All‐solution‐processing at low temperatures is important and desirable for making printed photovoltaic devices and also offers the possibility of a safe and cost‐effective fabrication environment for the devices. Herein, an all‐solution‐processed flexible organic solar cell (OSC) using poly(3,4‐ethylenedioxythiophene):poly‐(styrenesulfonate) electrodes is reported. The all‐solution‐processed flexible devices yield the highest power conversion efficiency of 10.12% with high fill factor of over 70%, which is the highest value for metal‐oxide‐free flexible OSCs reported so far. The enhanced performance is attributed to the newly developed gentle acid treatment at room temperature that enables a high‐performance PEDOT:PSS/plastic underlying substrate with a matched work function (≈4.91 eV), and the interface engineering that endows the devices with better interface contacts and improved hole mobility. Furthermore, the flexible devices exhibit an excellent mechanical flexibility, as indicated by a high retention (≈94%) of the initial efficiency after 1000 bending cycles. This work provides a simple route to fabricate high‐performance all‐solution‐processed flexible OSCs, which is important for the development of printing, blading, and roll‐to‐roll technologies.     

Large‐Area Organic Solar Cells: Material Requirements,Modular Designs,and Printing Methods

The printing of large‐area organic solar cells (OSCs) has become a frontier for organic electronics and is also regarded as a critical step in their industrial applications. With the rapid progress in the field of OSCs, the highest power conversion efficiency (PCE) for small‐area devices is approaching 15%, whereas the PCE for large‐area devices has also surpassed 10% in a single cell with an area of ≈1 cm². Here, the progress of this fast developing area is reviewed, mainly focusing on: 1) material requirements (materials that are able to form efficient thick active layer films for large‐area printing); 2) modular designs (effective designs that can suppress electrical, geometric, optical, and additional losses, leading to a reduction in the PCE of the devices, as a consequence of substrate area expansion); and 3) printing methods (various scalable fabrication techniques that are employed for large‐area fabrication, including knife coating, slot‐die coating, screen printing, inkjet printing, gravure printing, flexographic printing, pad printing, and brush coating). By combining thick‐film material systems with efficient modular designs exhibiting low‐efficiency losses and employing the right printing methods, the fabrication of large‐area OSCs will be successfully realized in the near future.     

Highly Efficient Semitransparent Organic Solar Cells with Color Rendering Index Approaching 100

Neutral‐colored semitransparent organic solar cells (ST‐OSCs) have attracted considerable attention owing to their unique application in no‐visual‐obstacle building‐integrated photovoltaics. Toward this promising potential application, a synergistic effect is first proposed by employing a dielectric mirror and ternary photoactive layer with near‐infrared absorption to tune the color perception as well as ST‐OSC performance precisely. As a result, a neutral‐color ST‐OSC with high average transmittance of over 21% is successfully constructed, and a remarkable color‐rendering index approaching 100 and high power conversion efficiency (PCE) of 9.37% are simultaneously achieved. To the best of our knowledge, this is the highest PCE reported for neutral‐color ST‐OSCs to date. Importantly, this synergistic effect is demonstrated to be a universal strategy that is not only suitable for various photoactive layer systems, but can also be implanted in flexible substrate. The resulting neutral‐color flexible ST‐OSCs also show a promising PCE of 8.76%.     

Recent Progress in Molecular Design of Fused Ring Electron Acceptors for Organic Solar Cells

The quest for sustainable energy sources has led to accelerated growth in research of organic solar cells (OSCs). A solution‐processed bulk‐heterojunction (BHJ) OSC generally contains a donor and expensive fullerene acceptors (FAs). The last 20 years have been devoted by the OSC community to developing donor materials, specifically low bandgap polymers, to complement FAs in BHJs. The current improvement from ≈2.5% in 2013 to 17.3% in 2018 in OSC performance is primarily credited to novel nonfullerene acceptors (NFA), especially fused ring electron acceptors (FREAs). FREAs offer unique advantages over FAs, like broad absorption of solar radiation, and they can be extensively chemically manipulated to tune optoelectronic and morphological properties. Herein, the current status in FREA‐based OSCs is summarized, such as design strategies for both wide and narrow bandgap FREAs for BHJ, all‐small‐molecule OSCs, semi‐transparent OSC, ternary, and tandem solar cells. The photovoltaics parameters for FREAs are summarized and discussed. The focus is on the various FREA structures and their role in optical and morphological tuning. Besides, the advantages and drawbacks of both FAs and NFAs are discussed. Finally, an outlook in the field of FREA‐OSCs for future material design and challenges ahead is provided.     

A Self‐Organized Poly(vinylpyrrolidone)‐Based Cathode Interlayer in Inverted Fullerene‐Free Organic Solar Cells

Herein, poly(vinylpyrrolidone) (PVP) is used as the cathode interlayer (CIL) through the self‐organization method in inverted organic solar cells (OSCs). By coating a solution of PVP and active layer materials onto a glass/indium tin oxide (ITO) substrate, the PVP can segregate to the near ITO side due to its high surface energy and strong intermolecular interaction with the ITO electrode. The power conversion efficiency (PCE) of the obtained OSC device reaches 13.3%, much higher than that of the control device with a PCE of only 10.1%. The improvement results from the increased exciton dissociation efficiency and the depressed trap‐assisted recombination, which can be attributed to the reduced work function of the cathode by the self‐organized PVP. Additionally, the molecular weight of the PVP has almost no influence on the device performance, and the PVP‐modified device presents superior stability. This method can also be applied in other highly efficient fullerene‐free OSCs, and with a fine selection of the active layer, a high PCE of 14.0% is obtained. Overall, this work demonstrates the great potential of the PVP‐based CIL in inverted OSCs fabricated via the self‐organization method.     

A General Approach for Lab‐to‐Manufacturing Translation on Flexible Organic Solar Cells

The blossoming of organic solar cells (OSCs) has triggered enormous commercial applications, due to their high‐efficiency, light weight, and flexibility. However, the lab‐to‐manufacturing translation of the praisable performance from lab‐scale devices to industrial‐scale modules is still the Achilles' heel of OSCs. In fact, it is urgent to explore the mechanism of morphological evolution in the bulk heterojunction (BHJ) with different coating/printing methods. Here, a general approach to upscale flexible organic photovoltaics to module scale without obvious efficiency loss is demonstrated. The shear impulse during the coating/printing process is first applied to control the morphology evolution of the BHJ layer for both fullerene and nonfullerene acceptor systems. A quantitative transformation factor of shear impulse between slot‐die printing and spin‐coating is detected. Compelling results of morphological evolution, molecular stacking, and coarse‐grained molecular simulation verify the validity of the impulse translation. Accordingly, the efficiency of flexible devices via slot‐die printing achieves 9.10% for PTB7‐Th:PC₇₁BM and 9.77% for PBDB‐T:ITIC based on 1.04 cm² . Furthermore, 15 cm² flexible modules with effective efficiency up to 7.58% (PTB7‐Th:PC₇₁BM) and 8.90% (PBDB‐T:ITIC) are demonstrated with satisfying mechanical flexibility and operating stability. More importantly, this work outlines the shear impulse translation for organic printing electronics.     

Dithieno[3,2‐b:2′,3′‐d]pyrrol Fused Nonfullerene Acceptors Enabling Over 13% Efficiency for Organic Solar Cells

A new electron‐rich central building block, 5,5,12,12‐tetrakis(4‐hexylphenyl)‐indacenobis‐(dithieno[3,2‐b:2′,3′‐d]pyrrol) (INP), and two derivative nonfullerene acceptors (INPIC and INPIC‐4F) are designed and synthesized. The two molecules reveal broad (600–900 nm) and strong absorption due to the satisfactory electron‐donating ability of INP. Compared with its counterpart INPIC, fluorinated nonfullerene acceptor INPIC‐4F exhibits a stronger near‐infrared absorption with a narrower optical bandgap of 1.39 eV, an improved crystallinity with higher electron mobility, and down‐shifted highest occupied molecular orbital and lowest unoccupied molecular orbital energy levels. Organic solar cells (OSCs) based on INPIC‐4F exhibit a high power conversion efficiency (PCE) of 13.13% and a relatively low energy loss of 0.54 eV, which is among the highest efficiencies reported for binary OSCs in the literature. The results demonstrate the great potential of the new INP as an electron‐donating building block for constructing high‐performance nonfullerene acceptors for OSCs.     

Ternary Organic Solar Cells with Efficiency >16.5% Based on Two Compatible Nonfullerene Acceptors

A ternary structure has been demonstrated as being an effective strategy to realize high power conversion efficiency (PCE) in organic solar cells (OSCs); however, general materials selection rules still remain incompletely understood. In this work, two nonfullerene small‐molecule acceptors 3TP3T‐4F and 3TP3T‐IC are synthesized and incorporated as a third component in PM6:Y6 binary blends. The photovoltaic behaviors in the resultant ternary OSCs differ significantly, despite the comparable energy levels. It is found that incorporation of 15% 3TP3T‐4F into the PM6:Y6 blend results in facilitating exciton dissociation, increasing charge transport, and reducing trap‐assisted recombination. All these features are responsible for the enlarged PCE of 16.7% (certified as 16.2%) in the PM6:Y6:3TP3T‐4F ternary OSCs, higher than that (15.6%) in the 3TP3T‐IC containing ternary devices. The performance differences are mainly ascribed to the compatibility between the third component and the host materials. The 3TP3T‐4F guest acceptor exhibits an excellent compatibility with Y6, tending to form well‐mixed phases in the ternary blend without disrupting the favored bicontinuous transport networks, whereas 3TP3T‐IC displays a morphological incompatibility with Y6. This work highlights the importance of considering the compatibility for materials selection toward high‐efficiency ternary organic OSCs.     

Black Phosphorous Quantum Dots Sandwiched Organic Solar Cells

Black phosphorous quantum dots (BPQDs) possess ambipolar charge transport, high mobility, and a tunable direct bandgap. Here, liquid‐exfoliated BPQDs are used as interlayers to modify both the electron transport layer and hole transport layer in organic solar cells (OSCs). The incorporation of BPQDs is beneficial to the formation of a cascade band structure and electron/hole transfer and extraction. The power conversion efficiency of the BPQDs‐incorporated OSC based on PTB7‐Th:FOIC blend is enhanced from 11.8% to 13.1%. In addition, power conversion efficiency enhancement is also achieved for other nonfullerene and fullerene‐based devices, demonstrating the universality of this interlayer methodology.