Mycobacteria mobility shift assay: a method for the rapid identification of Mycobacterium tuberculosis and nontuberculous mycobacteria

The identification of mycobacteria is essential because tuberculosis (TB) and mycobacteriosis are clinically indistinguishable and require different therapeutic regimens. The traditional phenotypic method is time consuming and may last up to 60 days. Indeed, rapid, affordable, specific and easy-to-perform identification methods are needed. We have previously described a polymerase chain reaction-based method called a mycobacteria mobility shift assay (MMSA) that was designed for Mycobacterium tuberculosis complex (MTC) and nontuberculous mycobacteria (NTM) species identification. The aim of this study was to assess the MMSA for the identification of MTC and NTM clinical isolates and to compare its performance with that of the PRA-hsp65 method. A total of 204 clinical isolates (102 NTM and 102 MTC) were identified by the MMSA and PRA-hsp65. For isolates for which these methods gave discordant results, definitive species identification was obtained by sequencing fragments of the 16S rRNA and hsp65 genes. Both methods correctly identified all MTC isolates. Among the NTM isolates, the MMSA alone assigned 94 (92.2%) to a complex or species, whereas the PRA-hsp65 method assigned 100% to a species. A 91.5% agreement was observed for the 94 NTM isolates identified by both methods. The MMSA provided correct identification for 96.8% of the NTM isolates compared with 94.7% for PRA-hsp65. The MMSA is a suitable auxiliary method for routine use for the rapid identification of mycobacteria.     

Quinones as antimycobacterial agents

Mycobacterium tuberculosis is a serious worldwide health threat, killing almost 3 million people per year. Other mycobacterial species, especially Mycobacterium avium, are emerging pathogens in the immunocompromised population, most notably AIDS patients. These nontuberculous mycobacteria (NTM) are ubiquitous in the environment, and naturally resistant to many disinfection procedures. Treatment options are limited, and no new antibiotics have been developed against mycobacteria since the 1970s. There is a desperate need for new biocides and antibiotics to prevent and treat mycobacterial infections. A small aromatic compound library has been screened for effectiveness in growth inhibition or killing of mycobacteria. Four species, representing the M. tuberculosis complex, the slow-growing NTM, and the rapid-growing NTM were used. Active compounds had minimal inhibitory concentrations as low as 12.5 microg/mL, with the active component being a quinone. The primarily bactericidal activity observed represents a unique mechanism of action. A fluorescent assay involving M. smegmatis expressing gfp was analyzed as a rapid assay for predicting inhibitory activity, but failed to predict activity well. Our compounds may have significant utility as soluble biocides against mycobacteria and other hardy nosocomial pathogens.     

Comparison of NaOH-N-acetyl cysteine and sulfuric acid decontamination methods for recovery of mycobacteria from clinical specimens

We compared the NaOH-N-acetyl cysteine (NaOH-NALC) and the sulfuric acid decontamination procedure in the detection of mycobacteria using the Mycobacteria Growth Indicator Tube (MGIT). In total 219 sputum specimens were collected from 142 Zambian patients and subjected to mycobacterial culture. One half of the specimen was decontaminated with NaOH-NALC and the other half was decontaminated with sulfuric acid. From the 438 samples a total of 261 (60%) cultures yielded growth of mycobacteria, consisting of 22 different species. The sulfuric acid method was more successful than the NaOH-NALC method in recovering mycobacteria in MGITs (146 versus 115 respectively, p = 0.001). Of the 146 positive mycobacterial cultures recovered after sulfuric acid decontamination 28 were Mycobacterium tuberculosis, 84 nontuberculous mycobacteria (NTM) and 34 acid fast bacterial isolates which could not be identified to the species level. The 115 mycobacteria recovered by the NaOH-NALC method consisted of 34 M. tuberculosis strains, 55 NTM and 26 acid fast bacteria that could not be identified. The most frequently isolated NTM were Mycobacterium lentiflavum and Mycobacterium intracellulare. Comparing the two decontamination methods the recovery of NTM in the sulfuric acid group was significant higher than in the NaOH-NALC group (p = 0.001). In contrast, no significant difference was found for the recovery of M. tuberculosis. These results show that the decontamination method used affects the recovery of nontuberculous mycobacteria in particular.     

Occurrence of Nontuberculous Mycobacterial Pulmonary Infection in an Endemic Area of Tuberculosis

The majority of investigations of the epidemiology of nontuberculous mycobacteria (NTM) have focused on highly developed nations with a low prevalence of tuberculosis. In contrast, the Para state of north Brazil represents an area of high tuberculosis prevalence and increasing NTM incidence. Toward the goal of understanding the dynamics of infection by all Mycobacterium species, we report patient characteristics and the identification of NTM strains isolated from sputum samples from patients that were residents of Para, a state in the Amazon region, Northern of Brazil, over the period January 2010 through December 2011 (2 years). The 29 NTM patients comprised 13.5% of positive mycobacterial cultures over the 2-year period. A major risk factor for NTM pulmonary disease was previous tuberculosis (76%). Further, the average age of NTM patients (52 years) was significantly higher than that of tuberculosis patients (39 years) and more were female (72.4% vs. 37.4%). Unlike other Brazilian states, NTM pulmonary patients in Para were infected with a different spectrum of mycobacteria; primarily the rapidly growing Mycobacterium massiliense and Mycobacterium simiae complex.     

EVALUATION OF CORD FORMATION IN KINYOUN-STAINED SMEARS OF MGIT CULTURES AS A RAPID IDENTIFICATION METHOD FOR MYCOBACTERIUM TUBERCULOSIS COMPLEX

Tuberculosis (TB) is a major cause of morbidity and mortality worldwide. One hundred and nineteen acid-fast bacilli-positive smears for Mycobacterium Growth Indicator Tube cultures from 119 patients were examined by microscopy for the presence of cord formation. The results were compared with those of the traditional TB identification method, IS6110 polymerase chain reaction (PCR) , and the Capilia TB assay which uses a monoclonal antibody to identify. With the traditional TB identification method, 57 of these 119 specimens were determined to be positive for Mycobacterium tuberculosis complex, and the organisms in the remaining 62 specimens were identified as non-tuberculosis mycobacteria (NTM). Both IS6110 PCR and the Capilia TB assay yielded results identical to those of the traditional method with 57 true TB and 62 NTM. For the cord formation assay, all 62 NTM cultures were negative, but 54 of the 57 true TB cultures were positive. Therefore, the cord formation method had a sensitivity of 94.74% (54/57), specificity of 100% (62/62), negative predictive value of 95.38% (62/65) and positive predictive value of 100% (54/54) for identification of M. tuberculosis complex. The cord formation method is less expensive and 3–5 weeks quicker than the biochemical tests in the identification of M. tuberculosis.

PRACTICAL APPLICATIONS

Due to the slow growth of Mycobacterium tuberculosis bacilli, delays in the detection of TB infection may occur in clinical TB laboratories when only conventional methods for recovery of mycobacteria are used. This problem can be supported by other techniques, such as cord formation in Kinyoun-stained smears of Mycobacterium Growth Indicator Tube cultures and molecular biology-based systems, which can be used in combination to obtain accurate results in a much shorter period of time.     

Development of multiplex PCR assays based on the 16S-23S rRNA internal transcribed spacer for the detection of clinically relevant nontuberculous mycobacteria

Aims: To accelerate the identification and differentiation of clinically relevant nontuberculous mycobacteria (NTM) with two sets of multiplex PCR (mPCR) targeting the 16S–23S rRNA internal transcribed spacer (ITS) region for timely patient management. Methods and Results: Two mPCR assays were developed: Slow‐Growers (SG) mPCR was used for the detection of slow‐growing mycobacteria, which included Mycobacterium avium complex, Mycobacterium kansasii, Mycobacterium gordonae and Mycobacterium xenopi whilst the other mPCR assay labelled as Fast‐Growers (FG) mPCR was used for the detection of Mycobacterium fortuitum complex, Mycobacterium abscessus and Mycobacterium chelonae. In these assays, a common forward primer based on a conserved section of the 16S rRNA region was used in conjunction with species‐specific reverse primers. The mPCRs were tested against 247 clinical mycobacterial isolates and demonstrated 100% specificity and sensitivity. Identification of the mycobacterial species was also validated by DNA sequencing of the 16S–23S ITS region and when further confirmation was needed, hsp65 sequencing was performed. Conclusions: The mPCR assays could be a potentially useful diagnostic tool for the rapid and accurate identification of clinically relevant NTM. Significance and Impact of the Study: In this study, we looked at the frequency of hospital isolated NTM over the last 5 years (2005–2010), and an mPCR targeting the ITS region was developed for NTM species that appeared to be more prevalent in the context of Singapore.     

Development of a real-time PCR-based method for rapid differential identification of Mycobacterium species

AIMS: To develop a real-time PCR method for rapid differential identification of many clinically important mycobacteria to the species level. METHODS AND RESULTS: Eighteen Mycobacterium species that are considered clinically important were targeted for the identification. One primer pair and 21 pairs of hybridization probes (HybProbes) specific for the genus, species or complex were designed based on the rpoB gene sequences of mycobacteria. Twenty-five different Mycobacterium reference species were tested. In a single round of real-time PCR, all the nontuberculous mycobacteria (NTM) species tested were identified at the genus level and 16 of the 18 targeted species were differentially identified to the species or complex level during the amplification cycles; subsequent melting curve analysis allowed the specific identification of all the target species at the species or complex level without cross-reactivity with the other species. CONCLUSIONS: The developed real-time PCR assay rapidly identifies the NTM at the genus level and 18 clinically important Mycobacterium species at the species or complex level. SIGNIFICANCE AND IMPACT OF THE STUDY: This real-time PCR assay provides a useful tool for the rapid differentiation of most clinically important Mycobacterium species.     

利用rpoB基因芯片技术进行快速分枝杆菌菌种鉴定

利用rpoB基因芯片技术快速进行分枝杆菌菌种鉴定.以分枝杆菌rpoB基因编码序列为靶基因,用基因芯片技术检测21种分枝杆菌标准株;8种其它细菌标准株;126株临床分离株.分枝杆菌与其它细菌标准株经PCR扩增后,分枝杆菌标准株均扩增出360 bp DNA片段,在其它细菌中,除甲型溶血性链球菌和假白喉棒状杆菌出现同样片段外,其它细菌均未见扩增.21种寡核苷酸探针除海分枝杆菌与偶然分枝杆菌的探针有交叉杂交外,其余均为特异性杂交.对126株临床分离株进行鉴定,89株为结核分枝杆菌,占70.6%(89/126),非结核分枝杆菌(NTM)占9.2%(9/98).应用rpoB基因芯片技术鉴定分枝杆菌菌种,是一种快速、准确的方法,具有较高的临床应用价值.     

利用rpoB基因芯片技术进行快速分枝杆菌菌种鉴定

利用rpoB基因芯片技术快速进行分枝杆菌菌种鉴定。以分枝杆菌rpoB基因编码序列为靶基因, 用基因芯片技术检测21种分枝杆菌标准株;8种其它细菌标准株;126株临床分离株。分枝杆菌与其它细菌标准株经PCR扩增后, 分枝杆菌标准株均扩增出360 bp DNA片段, 在其它细菌中, 除甲型溶血性链球菌和假白喉棒状杆菌出现同样片段外, 其它细菌均未见扩增。21种寡核苷酸探针除海分枝杆菌与偶然分枝杆菌的探针有交叉杂交外, 其余均为特异性杂交。对126株临床分离株进行鉴定, 89株为结核分枝杆菌, 占70.6％(89/126), 非结核分枝杆菌(NTM)占9.2％(9/98)。应用rpoB基因芯片技术鉴定分枝杆菌菌种, 是一种快速、准确的方法, 具有较高的临床应用价值。     

Combined rpoB duplex PCR and hsp65 PCR restriction fragment length polymorphism with capillary electrophoresis as an effective algorithm for identification of Mycobacterial species from clinical isolates

ABSTRACT: BACKGROUND: Mycobacteria can be quickly and simply identified by PCR restriction-enzyme analysis (PRA), but misidentification can occur because of similarities in band sizes that are critical for discriminating among species. Capillary electrophoresis can provide computer-aided band discrimination. The aim of this research was to develop an algorithm for identifying mycobacteria by combined rpoB duplex PRA (DPRA) and hsp65 PRA with capillary electrophoresis. RESULTS: Three hundred and seventy-six acid-fast bacillus smear-positive BACTEC cultures, including 200 Mycobacterium tuberculosis complexes (MTC) and 176 non-tuberculous mycobacteria (NTM) were analyzed. With combined hsp65 and rpoB DPRA, the accuracy rate was 100 % (200 isolates) for the MTC and 91.4 % (161 isolates) for the NTM. Among the discordant results (8.6 %) for the NTM, one isolate of Mycobacterial species and the an isolate of M. flavescens were found as new sub-types in hsp65 PRA. CONCLUSIONS: This effective and novel identification algorithm using combined rpoB DPRA and hsp65 PRA with capillary electrophoresis can rapidly identify mycobacteria and find new sub-types in hsp65 PRA. In addition, it is complementary to 16S rDNA sequencing.     

The identification of biomarkers differentiating Mycobacterium tuberculosis and non-tuberculous mycobacteria via thermally assisted hydrolysis and methylation gas chromatography–mass spectrometry and chemometrics

Infections with non-tuberculous mycobacteria (NTM) are increasing, particularly among immune-compromised patients and those with damaged lungs. Mycobacterium tuberculosis complex (MTB) strains, however, remain the most common cause of mycobacterial infection. A rapid method of distinguishing MTB from NTM is required for correct diagnosis and tuberculosis management. We have developed an automated procedure based on thermally-assisted hydrolysis and methylation followed by gas chromatography–mass spectrometry (THM–GC–MS) and advanced chemometrics to differentiate MTB from NTM. We used early cultures of mycobacteria in this first step towards the direct identification of these bacteria in sputum using a hand-held portable device. To build a classification model, we used 44 strains including 15 MTB and 29 NTM. A matrix of the aligned dataset containing ~45,700 features (retention time/mass pairs) for the 44 observations was submitted to partial least squares discriminant analysis (PLS–DA). We could reduce the number of features down to 250 without compromising the accuracy of the model. Twenty different compounds were found through mass spectral interpretation of these 250 features. Some of these compounds have not been linked to tuberculosis before, others have been proposed previously as diagnostic biomarkers for this disease. We have built a final model based on our proposed biomarkers that performed with 95 % accuracy in distinguishing MTB from NTM in early cultures. Since all these biomarkers have been chemically identified, work can proceed towards the development of simpler, bed-side diagnostic tests to differentiate MTB from NTM in sputum.     

Rapid characterization of Mycobacterium fortuitum-chelonei complex by restriction fragment length polymorphism of ribosomal RNA genes

Using labelled, gamma-32P rRNA of mycobacteria as a probe restriction fragment length polymorphism (RFLP) of rRNA genes of strains belonging to the Mycobacterium fortuitum-chelonei complex was analysed. Each DNA sample was cleaved with EcoRI restriction endonuclease, the fragments were separated by agarose gel electrophoresis and transferred to nitrocellulose membrane. Fragments of DNA containing rRNA genes were identified by hybridization with gamma-32P-labelled rRNA. Patterns were found to be species specific and both the species were distinguishable from each other. Results indicate that this approach can be used for rapid genomic characterization of the Mycobacterium fortuitum-chelonei complex.     

Nontuberculous mycobacteria in respiratory samples from patients with pulmonary tuberculosis in the state of Rond?nia, Brazil

The main cause of pulmonary tuberculosis (TB) is infection with Mycobacterium tuberculosis (MTB). We aimed to evaluate the contribution of nontuberculous mycobacteria (NTM) to pulmonary disease in patients from the state of Rondônia using respiratory samples and epidemiological data from TB cases. Mycobacterium isolates were identified using a combination of conventional tests, polymerase chain reaction-based restriction enzyme analysis of hsp65 gene and hsp65 gene sequencing. Among the 1,812 cases suspected of having pulmonary TB, 444 yielded bacterial cultures, including 369 cases positive for MTB and 75 cases positive for NTM. Within the latter group, 14 species were identified as Mycobacterium abscessus, Mycobacterium avium, Mycobacterium fortuitum, Mycobacterium intracellulare, Mycobacterium gilvum, Mycobacterium gordonae, Mycobacterium asiaticum, Mycobacterium tusciae, Mycobacterium porcinum, Mycobacterium novocastrense, Mycobacterium simiae, Mycobacterium szulgai, Mycobacterium phlei and Mycobacterium holsaticum and 13 isolates could not be identified at the species level. The majority of NTM cases were observed in Porto Velho and the relative frequency of NTM compared with MTB was highest in Ji-Paraná. In approximately half of the TB subjects with NTM, a second sample containing NTM was obtained, confirming this as the disease-causing agent. The most frequently observed NTM species were M. abscessus and M. avium and because the former species is resistant to many antibiotics and displays unsatisfactory cure rates, the implementation of rapid identification of mycobacterium species is of considerable importance.     

The Epidemiology and Geographic Distribution of Nontuberculous Mycobacteria Clinical Isolates from Sputum Samples in the Eastern Region of China

BackgroundNontuberculous mycobacteria (NTM) have been reported to be increasing worldwide and its geographic distribution differs by region. The aim of this study was to describe the epidemiology and distribution of NTM in the eastern part of China.MethodsSputum samples were collected from 30 surveillance sites for tuberculosis drug resistance test from May 1, 2008 to December 31, 2008. Identification was performed using a biochemical test, multiplex PCR and GenoType Mycobacterium CM/AS assay.ResultsA total of 1779 smear positive clinical isolates were obtained, of which 60 (3.37%) were NTM. Five species/complex of NTM were identified; M. intracellulare was the predominated species (68.33%), followed by M. abscessus-M. immunogenum (13.33%), Mycobacterium spec. (10.00%), M. Kansasii (6.67%) and M. peregrinum-M. alvei-M. septicum (1.67%).Conclusion M. intracellulare was the main species of NTM in the eastern part of China and clinical physicians should pay more attention to NTM induced pulmonary disease.     

Development of a simple and low-cost real-time PCR method for the identification of commonly encountered mycobacteria in a high throughput laboratory

Aims:  To facilitate efficient identification of commonly encountered mycobacteria species ( Mycobacterium tuberculosis , Mycobacterium avium , Mycobacterium intracellulare , Mycobacterium fortuitum complex , Mycobacterium chelonae/abscessus , Mycobacterium kansasii , Mycobacterium gordonae ) in high throughput laboratories, a 16s rDNA sequence based real-time PCR assay was developed and evaluated.
Methods and Results:  Oligonucleotide primers and hybridization probes were designed based on sequence differences of the mycobacterial 16S rDNA gene. This assay was evaluated with 1649 suspected non-tuberculosis mycobacterial isolates. Apart from 3 out of 40  M. avium isolates that showed false signal with M. intracellulare specific probe, 100% specificity was obtained for all tested probes. Assay sensitivity varied from 88·9 to 100% depending on species. Average cost for obtaining a definite identification was only USD 1·1 with an average turn around time of less than 3 days.
Conclusions:  A rapid, simple and inexpensive real-time PCR assay was developed for the identification of common encountered mycobacteria in a high throughput laboratory setting.
Significance and Impact of the Study:  With this assay, more than 80% of the clinically isolated nontuberculous mycobacteria could be identified in a highly cost effective manner. This helped to save resources for other laboratory activities especially in high throughput mycobacterial laboratories.     

Use of a novel multiplex probe array for rapid identification of <Emphasis Type="Italic">Mycobacterium</Emphasis> species from clinical isolates

Conventional identification of mycobacteria is based on the analysis of their phenotypic and biochemical characteristics after culture; thus this method is time-consuming, laborious, and is not always conclusive. Developing a fast and accurate method for rapid identification of Mycobacterium species is in urgent need for early diagnosis of mycobacteriosis and effective patient management. In this study, an efficient and affordable novel multiplex probe array which allows simultaneous identification of 15 medically important mycobacterial species was developed. A pair of genus-specific primers and a set of genus- and species-specific probes were designed according to the conserved and polymorphic regions of the 16S rRNA gene, internal transcribed spacer (ITS) sequence, and 23S rRNA gene of mycobacteria. This probe array was applied for the identification of 78 clinical mycobacterial isolates recovered from Henan, China. The results showed that the specificity and sensitivity of the probe array were 100% for both genus-specific probe and Mycobacterium tuberculosis complex-specific probe. Among 52 isolates of nontuberculous mycobacteria, 43 isolates (82.7%) can be rapidly identified to the species level. Genetic variability of 16S-23S rRNA gene ITS region in M. avium, M. intracellulare, M. chelonae, M. abscessus and M. fortuitum were analyzed. With the accumulation of the sequences of ITS identified and further optimization of probes, the multiplex probe array has the potential to be developed into a practical tool for rapid and accurate identification of mycobacterial species in clinical laboratory.     

Combined Species Identification, Genotyping, and Drug Resistance Detection of Mycobacterium tuberculosis Cultures by MLPA on a Bead-Based Array

The population structure of Mycobacterium tuberculosis is typically clonal therefore genotypic lineages can be unequivocally identified by characteristic markers such as mutations or genomic deletions. In addition, drug resistance is mainly mediated by mutations. These issues make multiplexed detection of selected mutations potentially a very powerful tool to characterise Mycobacterium tuberculosis. We used Multiplex Ligation-dependent Probe Amplification (MLPA) to screen for dispersed mutations, which can be successfully applied to Mycobacterium tuberculosis as was previously shown. Here we selected 47 discriminative and informative markers and designed MLPA probes accordingly to allow analysis with a liquid bead array and robust reader (Luminex MAGPIX technology). To validate the bead-based MLPA, we screened a panel of 88 selected strains, previously characterised by other methods with the developed multiplex assay using automated positive and negative calling. In total 3059 characteristics were screened and 3034 (99.2%) were consistent with previous molecular characterizations, of which 2056 (67.2%) were directly supported by other molecular methods, and 978 (32.0%) were consistent with but not directly supported by previous molecular characterizations. Results directly conflicting or inconsistent with previous methods, were obtained for 25 (0.8%) of the characteristics tested. Here we report the validation of the bead-based MLPA and demonstrate its potential to simultaneously identify a range of drug resistance markers, discriminate the species within the Mycobacterium tuberculosis complex, determine the genetic lineage and detect and identify the clinically most relevant non-tuberculous mycobacterial species. The detection of multiple genetic markers in clinically derived Mycobacterium tuberculosis strains with a multiplex assay could reduce the number of TB-dedicated screening methods needed for full characterization. Additionally, as a proportion of the markers screened are specific to certain Mycobacterium tuberculosis lineages each profile can be checked for internal consistency. Strain characterization can allow selection of appropriate treatment and thereby improve treatment outcome and patient management.     

Diversity of nontuberculoid Mycobacterium species in biofilms of urban and semiurban drinking water distribution systems

Nontuberculous mycobacteria (NTM) are ubiquitous and have been isolated from a variety of environmental sources, including water. Various NTM were isolated from biofilms in drinking water distribution systems in two urban and two semiurban areas in South Africa. Most of the isolates belonged to opportunistic pathogenic species of the NTM group, but none belonged to the Mycobacterium avium complex.     

Comparison of three DNA extraction methods for Mycobacterium bovis, Mycobacterium tuberculosis and Mycobacterium avium subsp. avium

Aims:  To compare three methods for DNA extraction from Mycobacterium bovis , Mycobacterium tuberculosis and Mycobacterium avium subsp. avium .
Methods and Results:  The DNA was extracted from mycobacterial cultures using enzymatic extraction, combined bead beating and enzymatic extraction and cetyltrimethylammonium bromide (CTAB) extraction. The yield and quality of DNA were compared by spectrophotometry, agarose gel electrophoresis, restriction endonuclease analysis and PCR. The combined bead beating and enzymatic extraction method yielded more DNA. However, that method produced some sheared DNA, visible either by agarose gel electrophoresis or by restriction endonuclease analysis. All methods were appropriate for PCR amplification of a 123 bp fragment of IS 6110 in M. bovis and M. tuberculosis , and of a 1700 bp fragment of FR300 region in M. avium avium .
Conclusions:  Combined bead beating and enzymatic extraction method was the most efficient and easy method for extracting DNA from bacteria of the M. tuberculosis complex.
Significance and Impact of the Study:  The results reveal important differences among the DNA extraction methods for mycobacteria, which are relevant for the success of further downstream molecular analysis.     

Diversity of Nontuberculoid Mycobacterium Species in Biofilms of Urban and Semiurban Drinking Water Distribution Systems

Nontuberculous mycobacteria (NTM) are ubiquitous and have been isolated from a variety of environmental sources, including water. Various NTM were isolated from biofilms in drinking water distribution systems in two urban and two semiurban areas in South Africa. Most of the isolates belonged to opportunistic pathogenic species of the NTM group, but none belonged to the Mycobacterium avium complex.