变采样周期和多包传输的非线性NCS故障检测

研究具有多包传输、时变采样周期和未知干扰输入的Lipschitz非线性网络控制系统的故障检测问题。利用主动变采样周期的方法将多包传输的非线性连续网络控制系统建模为离散切换系统,设计基于观测器的鲁棒故障检测滤波器构造残差产生系统,运用Lyapunov稳定性理论和线性矩阵不等式(LMI)技术,给出了使闭环系统渐近稳定的充分条件及故障检测滤波器的增益矩阵。最后运用仿真算例说明了故障检测滤波器的残差产生系统对故障具有敏感性,同时对外部扰动输入具有鲁棒性。     

同时抑制低频振荡和次同步振荡的多通道广域自适应阻尼控制

设计了一种的自适应控制算法并证明了其正确性. 通过总体最小二乘旋转不变技术辨识出系统降阶模型及相关振荡模态,利用带通滤波器将不同的振荡模态分解到多个通道,然后基于所提的自适应算法对每个振荡模态设计了自适应控制器,减小了各个控制器间的影响. 在电磁暂态程序PSCAD/EMTDC中对向上直流孤岛运行方式进行了仿真验证. 结果表明：所提控制方法相对传统比例积分微分控制有更好的控制效果;对于系统发生不同故障时具有鲁棒性. 对于系统信号传输引起的时滞导致的控制器效果变差的问题,可以通过相位补偿解决. 关键词： 超稳定理论 系统辨识 振荡 自适应阻尼控制     

基于飞行器网络控制系统的多速率控制器设计

为了减少网络环境中的时延和数据包丢失对飞行器网络控制器系统的影响,设计了一种具有多速率的保性能控制器设计方法;多速率是指在具有多通道数据传输的系统中,各通道所需控制输入的频率不完全相同;在存在时延和丢包的情况下,利用增广技术对飞行器控制系统在整个循环周期内建立离散模型,此时为了使多速率控制方法更加有效,先基于此模型在控制器输入端构造一个预测器,根据预测器的输出为整个系统设计一个具有多控制速率的动态输出反馈控制器;然后给出并证明保性能控制器的存在条件和求解方法;最后通过某飞行器网络控制系统的数值算例验证了所提方法的有效性。     

基于粒子滤波状态估计的滚动轴承故障识别方法

提出了一种基于粒子滤波状态估计的滚动轴承故障识别方法,该方法主要包括故障模型建立和故障识别两个步骤。在故障模型建立部分,首先依据滚动轴承不同故障状态下的振动信号,建立对应的自回归模型,作为故障模型;在故障识别部分,将正常状态下对应的模型,转化为状态空间模型,设计粒子滤波器,然后对不同的故障状态进行估计,提取其残差的相关特征,并结合模型参数特征应用BP神经网络识别算法进行故障识别。最后以美国凯斯西储大学的滚动轴承振动数据为例,验证了该方法的有效性。     

一类具有随机时变通信时滞的遥操作系统同步控制

针对无人机地面遥操作中存在的通信延时、丢包等实际情况,研究了一类具有随机时变通信时滞的遥操作系统的同步控制问题.建立了这种具有通信时滞的主、从遥操作系统的控制模型;采用基于Markov跳变模态参数的时变时滞函数来刻画遥控通信网络中的时滞,在随机系统框架下,通过均方意义下的稳定性分析,求解系统的同步控制问题.利用一个微小型四旋翼无人飞行器半物理仿真平台对本文方法进行验证,初步仿真结果表明,通过反馈线性化分别设计控制器,可以保证主、从端运动轨迹的有界性.     

基于观测器的液压系统健康状态评估方法研究

为了实时评估液压系统的健康状态,提出了基于观测器的健康状态评估原理,利用解析模型、仿真模型和数据模型及其配合等方法进行液压系统标准模型的建立,联合实际液压系统的监测数据,构建液压系统的状态观测器。将实际系统的相关参数作为输入,实际监测点的输出与标准模型的输出进行特征分析与对比,在数据处理的基础上形成残差及其向量,运用数据分析方法计算系统健康度,并解析各元素及其耦合所映射的故障类型与故障程度,实现液压系统的故障定位与评估。最后,利用某型装备的起竖液压系统进行了应用举例,介绍了模型构建、故障模式与参数选择、残差构成及健康度计算的方法。所研究的状态评估方法对实时评估液压系统,及开展液压系统视情维修具有参考价值。     

高速1553B总线通讯控制器测试验证系统研究

通过对10M1553B总线通讯控制器的特性进行分析,再结合10M1553B总线通讯控制器的A、B总线通道切换测试及通讯强度测试的测试指标,提出了相应的测试验证系统方案;通过对测试验证结果的研究与分析,证实10M1553B总线通讯控制器具有较好的品质,能够在一定程度上替代国外的同类产品;同时针对10M1553B总线通讯控制器所设计的测试验证系统方案、各测试指标所对应的测试方法和通过准则,对于其它类似产品的系统级综合测试具有普遍性、适用性和指导性;并通过实际测试验证了该测试验证系统的可靠性和稳定性。     

基于自适应滑模控制的大型望远镜低速控制

为了提高永磁同步电机驱动的大型望远镜转台的低速跟踪性能,设计了自适应滑模控制器以实时抑制系统的参数不确定性和外部扰动对系统的影响。为了优化控制器参数和缩短控制系统的调试周期,辨识出了转台控制系统的控制模型,同时建立了系统内部的非线性因素模型,综合上述模型对系统进行了集成仿真。仿真和实验结果证明了所设计的自适应滑模控制器对系统参数不确定性、外部扰动和噪声具有较好的鲁棒性,对望远镜转台的低速控制效果良好。     

基于Volterra滤波器的参量阵扬声器互调失真补偿研究

针对单边带调制方法预处理的参量阵扬声器系统在复杂信号输入情况下存在明显互调失真的问题,引入Volterra滤波器模型和简化的一维Volterra滤波器模拟了其互调失真。设计了相应的逆滤波器,并对其抑制系统互调失真的性能进行了实验对比。结果表明,所设计的逆滤波器都能有效降低系统的互调失真,而后者具有较低的计算复杂度。     

基于预测控制的非连续路段下移动机器人的轨迹跟踪

针对非连续路段下的轨迹跟踪问题,设计了基于观测型的预测控制器。首先建立了移动机器人的运动学模型,根据机器人的运动学模型得出了其位姿误差微分方程;然后在轨迹跟踪问题的基础上,设计了系统的观测模型,通过将预测控制器与系统的观测模型结合,设计了观测型预测控制器;最后再MATLAB环境下,利用本文所设计的控制器对移动机器人在非连续路段下的轨迹跟踪问题进行仿真,并将仿真结果与PID控制器控制的仿真结果进行对比,由仿真结果可以看出,本文所设计的控制器具有很好的鲁棒性、快速性及稳定性,可适用于移动机器人的轨迹跟踪的研究。     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Theoretical analysis and simulation of conjugate heights for dual-conjugate AO system in lidar

A multi-conjugate adaptive optics （MCAO） can offer a possibility of widening field of view （FOV） characterized by the isoplanatic angle, and the choose of conjugate height becomes a basic problem for MCAO, which influences the size of iosplanatic angle. Considering the application of lidar, the isoplanatic angle＇s expressions of two deformable mirrors （DMs） MCAO for uplink and downlink are deduced. The effects of conjugate heights for dual-conjugate AO are thoughtfully discussed, and the isoplanatic angles are further analyzed. The results show that the isopanatic angle varies with the conjugate height and reaches the maximum as the conjugate height is at the optimal altitude. Moreover, the optimal conjugate height changes with the propagation distance.     

Quick single-photon detector with many avalanche photo diodes working on the time division

Due to the limit of response speed of the present single-photon detector, the code rate is still too low to come into practical use for the present quantum key distribution (QKD) system.A new idea is put up to design a quick single-photon detector.This quick single-photon detector is composed of a multi-port optic-fiber splitter and many avalanche photo diodes (APDs).Au of the ports with APDs work on the time division and cooperate with a logic discriminating and deciding unit driven by the clock signal.The operation frequency lies on the number N of ports, and can reach N times of the conventional single-photon detector.The single-photon prompt detection can come true for high repetition-rate pulses.The applying of this detector will largely raise the code rate of the QKD, and boost the commercial use.     

Measurement of nonlinear coefficient of optical fiber based on small chirped soliton transmission

We measure the waveform and phase curves of short optical pulses before and after transmission over different lengths of fibers by use of the pulse analyzer with the frequency-resolved optical gating (FROG),and numerically simulate pulse evolution under the experimental conditions.The nonlinear coefficient of the fiber is given by comparing the experimental results with the numerical ones.Difference between the experiment and numerical simulation is analyzed.     

Resonance scattering of canonical elastic shells in absorbing fluid medium

Resonance scattering of elastic spherical shell and cylindrical shell while the surrounding fluid medium has absorption is studied. The normal mode solution derived using exact elastic theory and the separation of variables is still applicable. However, the scattering form function has to be modified for the absorbing medium, otherwise the unreasonable result would be obtained. The backscattering form function in the absorbing medium is redefined, and the form function of elastic spherical and cylindrical shell with vacuum or solid matter filled is calculated in various absorption conditions. The results show that the absorption of surrounding fluid leads to notable attenuation of the coincidence resonances in the mid-frequency, but it has a little influence on the low-frequency resonance scattering induced by the filler inside the shell.