Chitosan‐grafted poly(hydroxyethyl methacrylate‐co‐glycidyl methacrylate) membranes for reversible enzyme immobilization

Epoxy group‐containing poly(hydroxyethyl methacrylate/glycidyl methacrylate), p(HEMA/GMA), membrane was prepared by UV initiated photopolymerization. The membrane was grafted with chitosan (CH) and some of them were chelated with Fe(III) ions. The CH grafted, p(HEMA/GMA), and Fe(III) ions incorporated p(HEMA/GMA)‐CH‐Fe(III) membranes were used for glucose oxidase (GOD) immobilization via adsorption. The maximum enzyme immobilization capacity of the p(HEMA/GMA)‐CH and p(HEMA/GMA)‐CH‐Fe(III) membranes were 0.89 and 1.36 mg/mL, respectively. The optimal pH value for the immobilized GOD preparations is found to have shifted 0.5 units to more acidic pH 5.0. Optimum temperature for both immobilized preparations was 10°C higher than that of the free enzyme and was significantly broader at higher temperatures. The apparent K_m values were found to be 6.9 and 5.8 mM for the adsorbed GOD on p(HEMA/GMA)‐CH and p(HEMA/GMA)‐CH‐Fe(III) membranes, respectively. In addition, all the membranes surfaces were characterized by contact angle measurements. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 3084–3093, 2007     

Porous dye affinity beads for albumin separation from human plasma

Porous polymeric beads were obtained by the suspension polymerization of 2‐hydroxyethyl methacrylate (HEMA) and ethylene glycol dimethacrylate (EGDMA). Poly(HEMA–EGDMA) beads were characterized by surfacearea measurements, swelling studies, FTIR, scanning electron microscopy (SEM), and elemental analysis. Poly (HEMA–EGDMA) beads had a specific surface area of 56 m²/g. SEM observations showed that the poly(HEMA–EGDMA) beads abounded macropores. Poly(HEMA–EGDMA) beads with a swelling ratio of 55%, and containing different amounts of Reactive Red 120 (9.2–39.8 μmol/g) were used in the adsorption/desorption of human serum albumin (HSA) from aqueous solutions and human plasma. The nonspecific adsorption of HSA was very low (0.2 mg/g). The maximum HSA adsorption amount from aqueous solution in phosphate buffer was 60.1 mg/g at pH 5.0. Higher HSA adsorption value was obtained from human plasma (up to 95.7 mg/g) with a purity of 88%. The equilibrium monolayer adsorption amount, Q_max was determined as 172.4 mg/g. The dimensionless separation factor (R_L) value shows that the adsorption behavior of HSA onto the Reactive Red 120 attached poly(HEMA–EGDMA) beads was favorable (0 < R_L < 1). Desorption of HSA from Reactive Red 120 attached poly (HEMA–EGDMA) beads was performed using 0.1M Tris/HCl buffer containing 0.5M NaCl. It was observed that HSA could be repeatedly adsorbed and desorbed with Reactive Red 120‐attached poly(HEMA–EGDMA) beads without significant loss in the adsorption amount. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci, 2007     

Dye derived and metal incorporated affinity poly(2-hydroxyethyl methacrylate) membranes for use in enzyme immobilization

Microporous poly(2-hydroxyethyl methacrylate) (PHEMA) membranes were prepared by UV-initiated photopolymerization of HEMA in the presence of an initiator (α,α′-azobisisobutyronitrile, AIBN). An affinity dye Cibacron Blue F3GA (CB) was attached covalently and then Fe³⁺ ions incorporated. The PHEMA-CB and PHEMA-CB-Fe³⁺ membranes derived were used for adsorption of glucose oxidase (GOD). The adsorption capacities of these membranes were determined under conditions of different pH and with different concentrations of the adsorbate in the medium. The adsorption phenomena appeared to follow a typical Langmuir isotherm. The glucose oxidase adsorption capacity of the Fe³⁺ incorporated membrane (87μgcm^-2) was greater than that of the dye-derived membrane (66μgcm^-2). Non-specific adsorption of the glucose oxidase on the PHEMA membranes was negligible. The K_m values for both immobilized glucose oxidase PHEMA-CB-GOD (8·3) and PHEMA-CB-Fe³⁺-GOD (7·6) were higher than that of the free enzyme (6·2mM). Optimum reaction pH was 5·5 for the free and 6·0 for both immobilized preparations. The optimum reaction temperature of the adsorbed enzymes was 5°C higher than that of the free enzyme and was significantly broader. After 15 successive uses the retained activity of the adsorbed enzyme was 87%. It was observed that enzymes could be repeatedly adsorbed and desorbed on the derived PHEMA membranes without significant loss in adsorption capacity or enzymic activity. © 1998 SCI.     

New metal chelate sorbent for albumin adsorption: Cibacron Blue F3GA-Zn(II) attached microporous poly(HEMA) membranes

Poly(2-hydroxyethyl methacrylate) [poly(HEMA)] membranes were prepared by UV-initiated photopolymerization of HEMA in the presence of an initiator (α-α′-azobis-isobutyronitrile, AIBN). The triazine dye Cibacron Blue F3GA was attached as an affinity ligand to poly(HEMA) membranes, covalently. These affinity membranes with a swelling ratio of 58% and containing 10.7 mmol Cibacron Blue F3GA/m² were used in the albumin adsorption studies. After dye-attachment, Zn(II) ions were chelated within the membranes via attached-dye molecules. Different amounts of Zn(II) ions [650–1440 mg Zn(II)/m²] were loaded on the membranes by changing the initial concentration of Zn(II) ions and pH. Bovine serum albumin (BSA) adsorption on these membranes from aqueous solutions containing different amounts of BSA at different pH was investigated in batch reactors. The nonspecific adsorption of BSA on the poly(HEMA) membranes was negligible. Cibacron Blue F3GA attachment significantly increased the BSA adsorption up to 92.1 mg BSA/m². Adsorption capacity was further increased when Zn(II) ions were attached (up to 144.8 mg BSA m²). More than 90% of the adsorbed BSA was desorbed in 1 h in the desorption medium containing 0.5M NaSCN at pH 8.0 and 0.025M EDTA at pH 4.9. © 1998 John Wiley & Sons, Inc. J Appl Polym Sci 68: 657–664, 1998     

Immobilization of glucoamylase on the plain and on the spacer arm‐attached poly(HEMA‐EGDMA) microspheres

Immobilization glucoamylase onto plain and a six‐carbon spacer arm (i.e., hexamethylene diamine, HMDA) attached poly(2‐hydroxyethylmethacrylate‐ethyleneglycol dimethacrylate) [poly(HEMA‐EGDMA] microspheres was studied. The microspheres were prepared by suspension polymerization and the spacer arm was attached covalently by the reaction of carbonyl groups of poly(HEMA‐EGDMA). Glucoamylase was then covalently immobilized either on the plain of microspheres via CNBr activation or on the spacer arm‐attached microspheres via CNBr activation and/or using carbodiimide (CDI) as a coupling agent. Incorporation of the spacer arm resulted an increase in the apparent activity of the immobilized enzyme with respect to enzyme immobilized on the plain of the microspheres. The activity yield of the immobilized glucoamylase on the spacer arm‐attached poly(HEMA‐EGDMA) microspheres was 63% for CDI coupling and 82% for CNBr coupling. This was 44% for the enzyme, which was immobilized on the plain of the unmodified poly(HEMA‐EGDMA) microspheres via CNBr coupling. The K_m values for the immobilized glucoamylase preparations (on the spacer arm‐attached microspheres) via CDI coupling 0.9% dextrin (w/v) and CNBr coupling 0.6% dextrin (w/v) were higher than that of the free enzyme 0.2% dextrin (w/v).The temperature profiles were broader for both immobilized preparations than that of the free enzyme. The operational inactivation rate constants (k_iop) of immobilized enzymes were found to be 1.42 × 10^?5 min^?1 for CNBr coupled and 3.23 × 10^?5 min^?1 for CDI coupled glucoamylase. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 81: 2702–2710, 2001     

Poly(vinylbenzylchloride) beads grafted with polymer brushes carrying hydrazine ligand for reversible enzyme immobilization

Poly(glycidylmethacrylate), p(GMA), brush grafted poly(vinylbenzyl chloride/ethyleneglycol dimethacrylate), p(VBC/EGDMA), beads were prepared by suspension polymerization and the beads were grafted with poly(glycidyl methacrylate), p(GMA), via surface‐initiated atom transfer radical polymerization aiming to construct a material surface with fibrous polymer. The epoxy groups of the fibrous polymer were reacted with hydrazine (HDZ) to create affinity binding site on the support for adsorption of protein. The influence of pH, and initial invertase concentration on the immobilization capacity of the p(VBC/EGDMA‐g‐GMA)‐HDZ beads has been investigated. Maximum invertase immobilization onto hydrazine functionalized beads was found to be 86.7 mg/g at pH 4.0. The experimental equilibrium data obtained invertase adsorption onto p(VBC/EGDMA‐g‐GMA)‐HDZ affinity beads fitted well to the Langmuir isotherm model. It was shown that the relative activity of immobilized invertase was higher than that of the free enzyme over broader pH and temperature ranges. The K_m and V_max values of the immobilized invertase were larger than those of the free enzyme. After inactivation of enzyme, p(VBC/EGDMA‐g‐GMA)‐HDZ beads can be easily regenerated and reloaded with the enzyme for repeated use. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Nonporous monosize polymeric sorbents: Dye and metal chelate affinity separation of lysozyme

Lysozyme adsorption onto dye‐attached nonporous monosize poly(2‐hydroxyethyl‐methacrylate‐methylmethacrylate) [poly(HEMA‐MMA)] microspheres was investigated. Poly(HEMA‐MMA) microspheres were prepared by dispersion polymerization. The monochloro‐triazine dye, Cibacron Blue F3GA, was immobilized covalently as dye–ligand. These dye‐affinity microspheres were used in the lysozyme adsorption–desorption studies. The effect of initial concentration of lysozyme and medium pH on the adsorption efficiency of dye‐attached and metal‐chelated microspheres were studied in a batch reactor. Effect of Cu(II) chelation on lysozyme adsorption was also studied. The nonspecific adsorption of lysozyme on the poly(HEMA‐MMA) microspheres was 3.6 mg/g. Cibacron Blue F3GA attachment significantly increased the lysozyme adsorption up to 247.8 mg/g. Lysozyme adsorption capacity of the Cu(II) incorporated microspheres (318.9 mg/g) was greater than that of the Cibacron Blue F3GA‐attached microspheres. Significant amount of the adsorbed lysozyme (up to 97%) was desorbed in 1 h in the desorption medium containing 1.0M NaSCN at pH 8.0 and 25 mM EDTA at pH 4.9. In order to examine the effects of separation conditions on possible conformational changes of lysozyme structure, fluorescence spectrophotometry was employed. We conclude that dye‐ and metal‐chelate affinity chromatography with poly(HEMA‐MMA) microspheres can be applied for lysozyme separation without causing any significant changes and denaturation. Repeated adsorption/desorption processes showed that these novel dye‐attached monosize microspheres are suitable for lysozyme adsorption. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 115–124, 2000     

Porous dye affinity beads for nickel adsorption from aqueous solutions: A kinetic study

We investigated a new adsorbent system, Reactive Red 120 attached poly(2‐hydroxyethyl methacrylate ethylene dimethacrylate) [poly(HEMA–EDMA)] beads, for the removal of Ni²⁺ ions from aqueous solutions. Poly(HEMA–EDMA) beads were prepared by the modified suspension copolymerization of 2‐hydroxyethyl methacrylate and ethylene dimethacrylate. Reactive Red 120 molecules were covalently attached to the beads. The beads (150–250 μm), having a swelling ratio of 55% and carrying 25.5 μmol of Reactive Red 120/g of polymer, were used in the removal of Ni²⁺ ions. The adsorption rate and capacity of the Reactive Red 120 attached poly(HEMA–EDMA) beads for Ni²⁺ ions was investigated in aqueous media containing different amounts of Ni²⁺ ions (5–35 mg/L) and having different pH values (2.0–7.0). Very high adsorption rates were observed at the beginning, and adsorption equilibria were then gradually achieved in about 60 min. The maximum adsorption of Ni²⁺ ions onto the Reactive Red 120 attached poly(HEMA–EDMA) beads was 2.83 mg/g at pH 6.0. The nonspecific adsorption of Ni²⁺ ions onto poly(HEMA–EDMA) beads was negligible (0.1 mg/g). The desorption of Ni²⁺ ions was studied with 0.1M HNO₃. High desorption ratios (>90%) were achieved. The intraparticle diffusion rate constants at various temperatures were calculated as k_20°C = 0.565 mg/g min^0.5, k_30°C = 0.560 mg/g min^0.5, and k_40°C = 0.385 mg/g min^0.5. Adsorption–desorption cycles showed the feasibility of repeated use of this novel adsorbent system. The equilibrium data fitted very well both Langmuir and Freundlich adsorption models. The pseudo‐first‐order kinetic model was used to describe the kinetic data. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100:5056–5065, 2006     

Methacryloylamidoglutamic acid functionalized poly(2-hydroxyethyl methacrylate) beads for UO22+ removal

A novel approach was developed to obtaining high uranium adsorption capacity utilizing 2-methacryloylamidoglutamic acid (MAGA) as a metal-complexing ligand. MAGA was synthesized by using methacryloyl chloride and glutamic acid. Spherical beads with an average size of 150–200 μm were obtained by suspension polymerization of MAGA and 2-hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. Poly(2-hydroxyethyl methacrylate–methacryloylamidoglutamic acid) [p(HEMA–MAGA)] beads have a specific surface area of 56.7 m²/g. p(HEMA–MAGA) beads were characterized by swelling studies, FTIR and elemental analysis. The p(HEMA–MAGA) beads with a swelling ratio of 63%, and containing 3.5 mmol MAGA/g were used in the removal of UO₂²⁺ from aqueous solutions. Adsorption equilibrium was achieved in about 120 min. The adsorption of uranium(VI) ions onto pHEMA was negligible (1.4 mg/g). The MAGA incorporation significantly increased the uranium adsorption capacity (204.8 mg/g). Adsorption capacity of MAGA incorporated beads increased significantly with pH and then reached the maximum at pH 6.0. Consecutive adsorption and elution operations showed the feasibility of repeated use for p(HEMA–MAGA) chelating beads.     

Trametes versicolor laccase immobilized poly(glycidyl methacrylate) based cryogels for phenol degradation from aqueous media

This study aims removal of phenols in wastewater by enzymatic oxidation method. In this study, Trametes versicolor laccase was covalently immobilized onto a cryogel matrix by the nucleophilic attack of amino groups of laccase to epoxy groups of matrix. Glycidyl methacrylate was chosen as functional monomer to prepare poly(2‐hydroxyethyl methacrylate‐co‐glycidyl methacrylate) [p(HEMA‐co‐GMA)] cryogels. The enzyme immobilized matrix was characterized by FTIR, SEM, and swelling tests. The effect of pH, reaction time, temperature, substrate concentration, enzyme concentration, and storage period on immobilized enzyme activity was determined and compared with those of free enzyme. The model substrate was 2,2′‐azino‐bis(3‐ethylbenzothiazoline‐6‐sulfonic acid (ABTS). Lineweaver‐Burk plots were used to calculate K_m and V_m values. K_m values were 165.1 and 156.0 µM while V_m values were 55.2 µM min^?1 and 1.57 µM min^?1 for free and immobilized laccase, respectively. Immobilized enzyme was determined to retain 82.5% and 72.0% of the original activity, respectively, after 6 consecutive use and storage period of 4 weeks. The free enzyme retained only 24.0% of its original activity following the same storage period. Lastly, decomposition products resulting from enzymatic oxidation of a model phenolic compound (3,5‐dinitrosalicylic acid) in aqueous solution were identified by liquid chromatography‐tandem mass spectrometry (LC‐MS/MS). © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41981.     

Preparation of Zn2+‐chelated poly(HEMA‐MAH) cryogel for affinity purification of chicken egg lysozyme

Supermacroporous poly(2‐hydroxyethyl methacrylate) [poly(HEMA)]‐based monolithic cryogel column was prepared by radical cryocopolymerization of HEMA with N‐methacryloyl‐L ‐histidine methyl ester (MAH) as functional comonomer and N,N′‐methylene‐bisacrylamide (MBAAm) as crosslinker directly in a plastic syringe for affinity purification of lysozyme from chicken egg white. The monolithic cryogel containing a continuous polymeric matrix having interconnected pores of 10–50 μm size was loaded with Zn²⁺ ions to form the metal chelate with poly(HEMA‐MAH) cryogel. Poly(HEMA‐MAH) cryogel was characterized by swelling studies, FTIR, scanning electron microscopy, and elemental analysis. The equilibrium swelling degree of the poly(HEMA‐MAH) monolithic cryogel was 5.62 g H₂O/g cryogel. Poly(HEMA‐MAH) cryogel containing 45.8 μmol MAH/g was used in the adsorption/desorption of lysozyme from aqueous solutions. The nonspecific adsorption of lysozyme was very low (7.5 mg/g). The maximum amount of lysozyme adsorption from aqueous solution in phosphate buffer was 209 mg/g at pH 7.0. It was observed that lysozyme could be repeatedly adsorbed and desorbed with the poly(HEMA‐MAH) cyogel without significant loss of adsorption capacity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Poly(hydroxyethyl methacrylate‐co‐glycidyl methacrylate) reactive membrane utilised for cholesterol oxidase immobilisation

Poly(2‐hydroxyethyl methacrylate‐co‐glycidyl methacrylate) p(HEMA–GMA) membrane was prepared by UV‐initiated photopolymerisation of 2‐hydroxyethyl methacrylate (HEMA) and glycidyl methacrylate (GMA) in the presence of an initiator, azobisisobutyronitrile (AIBN). Cholesterol oxidase was immobilised directly on the membrane by forming covalent bonds between its amino groups and the epoxide groups of the membrane. An average of 53 µg of enzyme was immobilised per cm² of membrane, and the bound enzyme retained about 67% of its initial activity. Immobilisation improved the pH stability of the enzyme as well as its temperature stability. The optimum temperature was 5 °C higher than that of the free enzyme and was significantly broader. The thermal inactivation rate constants for free and immobilised preparations at 70 °C were calculated as k_{i (free)} 1.06 × 10^?1 min^?1 and k_{i (imm)} 2.68 × 10^?2 min^?1, respectively. The immobilised enzyme activity was found to be quite stable in the repeated experiments. © 2002 Society of Chemical Industry     

Epoxy‐derived pHEMA membrane for use bioactive macromolecules immobilization: Covalently bound urease in a continuous model system

Poly(2‐hydroxyethylmethacrylate) (pHEMA) membranes were prepared by UV‐initiated photopolymerization of HEMA in the presence of an initiator (α‐α′‐azobisisobutyronitrile, AIBN). The epoxy group, i.e., epichlorohydrin, was incorporated covalently, and the urease was immobilized onto pHEMA membranes by covalent bonding through the epoxy group. The retained activity of the immobilized enzyme was found to be 27%. The K_m values were 18 and 34 mM for the free and the immobilized enzymes, respectively, and the V_max values were found to be 59.7 and 16.2 U mg⁻¹ for the free and the immobilized enzyme. The optimum pHs was 7.2 for both forms, and the optimum temperature for the free and the immobilized enzymes were determined to be 45 and 50°C, respectively. The immobilized urease was characterized in a continuous system and during urea degradation the operational stability rate constant for the immobilized enzyme was found to be 5.83 × 10⁻⁵ min⁻¹. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2000–2008, 2000     

New generation polymeric nanospheres for lysozyme adsorption

Novel hydrophobic nanospheres with an average size of 100 nm utilizing N‐methacryloyl‐(l)‐tryptophan methyl ester (MAT) as a hydrophobic monomer were prepared by surfactant free emulsion polymerization of 2‐hydroxyethyl methacrylate (HEMA) and MAT. MAT was synthesized using methacryloyl chloride and l‐tryptophan methyl ester. Specific surface area of the nonporous nanospheres was found to be 1914 m²/g. Poly(HEMA–MAT) nanospheres were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscopy (SEM). Average particle size, size distribution, and surface charge measurements were also performed. Elemental analysis of MAT for nitrogen was estimated as 1.95 mmol/g polymer. Then, poly(HEMA–MAT) nanospheres were used in the adsorption of lysozyme in batch system. Using an optimized adsorption protocol, a very high loading of 1075 mg lysozyme/g nanosphere was obtained. The adsorption phenomena appeared to follow a typical Langmuir isotherm. It was observed that enzyme could be repeatedly adsorbed and desorbed without significant loss in adsorption amount or enzyme activity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Novel magnetic nanoparticles for the hydrolysis of starch with Bacillus licheniformis α‐amylase

Novel magnetic nanoparticles with an average size of 350–400 nm with N‐methacryloyl‐(L )‐phenylalanine (MAPA) as a hydrophobic monomer were prepared by the surfactant‐free emulsion polymerization of 2‐hydroxyethyl methacrylate, MAPA, and magnetite in an aqueous dispersion medium. MAPA was synthesized from methacryloyl chloride and L ‐phenylalanine methyl ester. The specific surface area of the nonporous magnetic nanoparticles was found to be 580 m²/g. Magnetic poly[2‐hydroxyethyl methacrylate–N‐methacryloyl‐(L )‐phenylalanine] nanoparticles were characterized by Fourier transform infrared spectroscopy, electron spin resonance, atomic force microscopy, and transmission electron microscopy. Elemental analysis of MAPA for nitrogen was estimated as 4.3 × 10^?3 mmol/g of nanoparticles. Then, magnetic nano‐poly[2‐hydroxyethyl methacrylate–N‐methacryloyl‐(L )‐phenylalanine] nanoparticles were used in the adsorption of Bacillus licheniformis α‐amylase in a batch system. With an optimized adsorption protocol, a very high loading of 705 mg of enzyme/g nanoparticles was obtained. The adsorption phenomena appeared to follow a typical Langmuir isotherm. The inverse of enzyme affinity for free amylase (181.82 mg/mL) was higher than that for immobilized enzyme (81.97 mg/mL). Storage stability was found to increase with adsorption. It was observed that the enzyme could be repeatedly adsorbed and desorbed without a significant loss in the adsorption amount or enzyme activity. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

The effect of external stimuli on the invertase adsorption capacity of poly(N-vinyl-2-pyrrolidone-co-itaconic acid) hydrogels

Polyelectrolyte Poly(N-vinyl-2-pyrrolidone-co-itaconic acid) hydrogels (P(VP/IA)) with varying compositions were prepared from ternary VP/IA/water mixtures. The effect of external stimuli such as pH of the solution, temperature, substrate concentration of solution, and storage stability on the invertase adsorption capacity of P(VP/IA) hydrogels was investigated. The adsorption capacity of the hydrogels was found to increase from 4.4 to 18.4 mg invertase/g dry gel with increasing amount of IA in the gel system, while P(VP) gel adsorbed only 3.1 mg invertase/g dry gel. Kinetic parameters were calculated as Michaelis-Menten constant K_m = 20.6 mmol L^–1 and maximum velocity V_max = 6.44×10^–5 mol dm^–3 min^–1 for free enzyme and in the range of K_m = 26.4–41.1 mmol L^–1 and V_max = 6.35·10^–5–6.66·10^–5 mol dm^–3 min^–1, depending on the amount of IA in the hydrogel. Enzyme activities were found to increase from 59.0% to 72.0% with increasing amount of IA in the gel system and retained their activities for one month storage. The enzyme activities, after storage for one month at 4°C, were found to be 21.0% and 59.0–74.0% of the initial activity values for free and adsorbed enzyme, respectively. The optimal pH values for free and adsorbed enzymes were determined as 4.56 and 5.00, respectively. The optimum temperature for free and adsorbed enzymes was 55°C. Adsorption studies have shown that not only the gel composition but also the stimuli, temperature and pH of the solution play an important role on the invertase adsorption capacity of poly(VP/IA) hydrogels.     

Dye Attached Nanoparticles for Lysozyme Adsorption

In this work, Reactive Blue 15 dye functionalized poly(HEMA) nanoparticles were synthesized for reversible adsorption of lysozyme from its aqueous solution. For this, nano-sized poly(HEMA) nanoparticles were synthesized by the surfactant free emulsion polymerization. Reactive Blue 15 dye then covalently attached to the polymeric structure. These novel dye attached poly(HEMA) nanoparticles were used for the adsorption of lysozyme. Characterization of dye attached nanoparticles was carried out by using FTIR, AFM, and elemental analysis. Incorporation of the dye onto the polymeric structure was demonstrated by FTIR and elemental analysis, while the size and the shape of the nanoparticles were shown by AFM. The incorporated amount of the dye was found to be 70.3 μmol/g nanoparticle with sulphur stoichiometry and it was found that the prepared nanoparticles were in a spherical form and were about 100 nm diameter. Lysozyme adsorption studies were carried out with different conditions (pH, lysozyme concentration, temperature, and ionic strength) and maximum lysozyme adsorption was found to be 630.7 mg/g nanoparticle at pH 7.0 in 25°C medium temperature. Adsorbed lysozyme was desorbed by 1.0 M of NaCl with 96% recovery and synthesized dye-attached nanoparticles were used 10 times without any decrease in their adsorption capacity.     

Adsorption of Ni2+ from aqueous solutions by novel polyethyleneimine‐attached poly(p‐chloromethylstyrene) beads

In this study Ni²⁺ adsorption properties of polyethyleneimine (PEI)‐attached poly(p‐chloromethylstyrene) (PCMS) beads were investigated. Spherical beads with an average size of 186 μm were obtained by the suspension polymerization of p‐chloromethylstyrene conducted in an aqueous dispersion medium. Owing to the reasonably rough character of the bead surface, PCMS beads had a specific surface area of 14.1 m²/g. PEI chains could be covalently attached onto the PCMS beads with equilibrium binding capacities up to 208 mg PEI/g beads, via a direct chemical reaction between the amine and chloro‐methyl groups. After PEI adsorption with 10% (w/w) initial PEI concentration, free amino content of PEI‐attached PCMS beads was determined as 0.91 mEq/g. PEI‐attached PCMS beads were utilized as adsorbents in the adsorption/desorption of Ni²⁺ ions from synthetic solutions. The adsorption process was fast; 90% of adsorption occurred within 90 min, and equilibrium was reached at around 2 h. Adsorption capacity was obtained to be 78.2 mg/g at a pH of about 6.0. The chelating beads can be easily regenerated by 0.1 M HNO₃ with higher effectiveness. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 83: 2467–2473, 2002     

Preparation of a novel metal‐chelate affinity beads for albumin isolation from human plasma

In this study, we developed a novel approach to obtain a high protein‐adsorption capacity utilizing 2‐methacryloylamidohistidine (MAH) as a biollgand. MAH was synthesized by reacting methacryloyl chloride and histidine. Spherical beads, with an average size of 150–200 μm, were obtained by the radical suspension polymerization of MAH, ethyleneglycol dimethacrylate (EGDMA), and 2‐hydroxyethyl methacrylate (HEMA) conducted in an aqueous dispersion medium. p(EGDMA–HEMA–MAH) beads had a specific surface area of 17.6 m²/g. The synthesized MAH monomer was characterized by NMR. p(EGDMA–HEMA–MAH) beads were characterized by a swelling test, FTIR, and elemental analysis. Then, Cu(II) ions were incorporated into the beads and Cu(II) loading was found to be 0.96 mmol/g. These beads, with a swelling ratio of 65% and containing 1.6 mmol MAH/g, were used in the adsorption/desorption of human serum albumin (HSA) from both aqueous solutions and human serum. The adsorption of HSA onto p(EGDMA–HEMA–MAH) was low (8.8 mg/g). Cu(II) chelation onto the beads significantly increased the HSA adsorption (56.3 mg/g). The maximum HSA adsorption was observed at pH 8.0 Higher HSA adsorption was observed from human serum (94.6 mg HSA/g). Adsorptions of other serum proteins were obtained as 3.7 mg/g for fibrinogen and 8.5 mg/g for γ‐globulin. The total protein adsorption was determined as 107.1 mg/g. Desorption of HSA was obtained using a 0.1M Tris/HCI buffer containing 0.5M NaSCN. High desorption ratios (to 98% of the adsorbed HSA) were observed. It was possible to reuse Cu(II)‐chelated p(EGDMA–HEMA–MAH) beads without significant decreases in the adsorption capacities. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 2840–2847, 2003     

New generation polymeric nanospheres for catalase immobilization

Monosize poly(2‐hydroxyethyl methacrylate‐co‐N‐methacryloly‐L ‐histidinemethylester) [mon‐poly(HEMA‐MAH)] nanospheres were prepared via surfactant‐free emulsion polymerization method. L ‐Histidine groups of the mon‐poly(HEMA‐MAH) nanospheres were chelated with Fe³⁺ ions. Mon‐poly(HEMA‐MAH) nanospheres were characterized by Fourier transform infrared spectroscopy, proton NMR, and scanning electron microscopy. Particle size of the mon‐poly(HEMA‐MAH) nanospheres was measured by Zeta Sizer. Elemental analysis of MAH for nitrogen was estimated as 0.94 mmol/g polymer. The catalase immobilized onto the mon‐poly(HEMA‐MAH)–Fe³⁺ nanospheres resulted in increasing the enzyme stability with time. Optimum operational temperature for both immobilized preparations was the same, and the temperature profiles of the immobilized preparations were significantly broader. It was observed that enzyme could be repeatedly adsorbed and desorbed on the mon‐poly(HEMA‐MAH)–Fe³⁺ nanospheres without loss of adsorption capacity or enzymic activity. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009