Numerical and experimental validation of a hybrid finite element-statistical energy analysis method

The finite element (FE) and statistical energy analysis (SEA) methods have, respectively, high and low frequency limitations and there is therefore a broad class of "mid-frequency" vibro-acoustic problems that are not suited to either FE or SEA. A hybrid method combining FE and SEA was recently presented for predicting the steady-state response of vibro-acoustic systems with uncertain properties. The subsystems with long wavelength behavior are modeled deterministically with FE, while the subsystems with short wavelength behavior are modeled statistically with SEA. The method yields the ensemble average response of the system where the uncertainty is confined in the SEA subsystems. This paper briefly summarizes the theory behind the method and presents a number of detailed numerical and experimental validation examples for structure-borne noise transmission.     

金属杆内疲劳裂纹与振动/超声相互作用及其定量表征

根据同步解调的原理,考察振动声调制检测输出信号中的调制成分,对金属杆内振动/超声在裂纹面上的相互作用进行了分析.制作了含有不同尺寸裂纹的铝杆试样,以扫频激励的方式得到合适的高频激励参数,分析输出信号中的调制信息,发现工件中的高频超声可分为两部分:一部分声波通过裂纹面,受到低频振动信号的调制,另一部分则保持不变。在此基础上对非线性调制模型进行了修正,并提出了一种用于裂纹检测的定量方法。与超声C扫描检测结果对比表明,此定量方法可用于估计金属杆中疲劳裂纹尺寸。      

Vibro-acoustic behaviour of laminated double glazing enclosing a viscothermal fluid cavity

This paper presents a new numerical model to investigate the vibro-acoustic behaviour of two laminated glass plates enclosing a thin viscothermal fluid cavity. The aim of this work is to develop an original five layer (two skins plies, two adhesive films and a core ply) laminated plate finite element by mixing Kirchhoff and Mindlin plate’s theory. The formulation is based on the theory that accounts for the transverse shear in the adhesive films and in the core. The acousto-elastic model is established in dimensionless appropriate form including the effects of viscosity and thermal conductivity of fluid and by taking into account the fluid-structure interaction. The discretization of the energy functional by finite element method gives after minimisation a symmetrical coupled matrix system in which the acoustic matrices are frequency dependent. Therefore, an iterative procedure is derived to determine the eigenmodes of the coupled system. The modal approach is adopted to determine the vibro-acoustic system’s response. Then, the validation of the new laminate finite element model is achieved by comparing the sandwich plate results against data obtained from literature. Subsequently, predicted responses, such as the vibration transmissibility and the transmission loss of the coupled system, for a given laminated double glazing under an imposed homogeneous pressure are presented and discussed. Numerical results show the importance of both lamination and viscothermal fluid effects on double glazing vibro-acoustic behaviour.     

Interaction of fatigue crack with vibration and ultrasound in metallic rod and its use for quantitative characterization

According to the principle of synchronous demodulation,the modulation information in the output signal of vibro-acoustic modulation test was investigated and the nonlinear interaction of sound and vibration with the crack interface in a metallic rod was analyzed.A swept signal excitation was used to obtain a proper high frequency parameter in the test of aluminum rod samples with different sizes of cracks and the modulation information in the output signal was analyzed.It was found that the ultrasound wave in the structure can be separated into two parts.One is the wave which passes through the crack interface modulated by the low frequency vibration,and other wave has no any changes.The nonlinear modulation model was modified and a quantitative method for crack detection was proposed.It is demonstrated by comparing with the ultrasonic C-scanning that this method can be used to estimate the fatigue crack size in the metallic rod.     

Design of vibration isolators by exploiting the beneficial effects of stiffness and damping nonlinearities

The present study is concerned with the design of a new type of single degree of freedom (sdof) nonlinear vibration isolation system that can deal with harmonic excitations and take advantage of both spring and damping nonlinearities. For typical design requirements expressed in terms of a transmissibility envelope, the proposed design makes use of a recently developed method called the output frequency response function (OFRF) approach, which provides a direct relationship between the system output frequency response and parameters that define the system nonlinearity. Taking all output harmonics into account, a detailed step-by-step procedure is developed to systematically determine the nonlinear parameters from a small set of simulation or experimental data. Simulation studies are conducted to verify the results and demonstrate that the design can effectively achieve all the three requirements for a vibration isolation system of a low resonant peak, low high frequency transmissibility, and a large isolation range.     

Efficient semi-analytical methods for the vibration response of and acoustic radiation from a periodical orthogonally rib-stiffened plate

In order to theoretically predict and analyze the vibration response and acoustic radiation characteristics of a periodical orthogonally rib-stiffened plate,its vibro-acoustic equations of an underwater infinite model are established.The rib-stiffened plate is stimulated by a harmonic plane pressure.By using the Fourier transforms,Poisson's summation formula and space harmonic method,the structural vibration response and acoustic radiation pressure are expressed as functions of displacement harmonic components.Efficient semi-analytical methods are proposed in this work,and then approximate solutions for finite terms of the harmonic components are obtained by employing the truncation technique.Effects of the vibration response,rib spacing and torsional moment of the ribs on the radiation pressure are examined,and the validity of the present methods is also verified.Theoretical results show that the torsional moment of the ribs affects the modal frequencies of the stiffened plate,which should not be neglected in engineering applications with high precision requirement.With attachment of the ribs to the thin plate,its far field radiation pressure can be reduced in the low frequency range by adjusting rib spacing and cross sectional size of the ribs.     

Transfer matrix method for internal noise prediction of an arbitrary shell-cavity structure induced by temporal-spatial random surface excitation

Combining structural finite element method(FEM),acoustic finite element and boundary element methods,a model of elastic shell vibration of an arbitrary shell-cavity structure coupled with internal and external sound fields is built.In addition,the transfer matrices from the excitation force to vibration of the shell and internal sound field are calculated.As the fluctuating pressure of turbulent boundary layer(TBL) is a temporal-spatial random surface excitation,the overall shape function matrix is introduced,and then the relationship between power spectral density matrix of the generalized nodal force of the elastic shell and power spectral density of the temporal-spatial random surface excitation is derived.Utilizing the vibro-acoustic coupled transfer matrix,relationships between the power spectral densities of vibration of the elastic shell/internal sound field and the power spectral density matrix of the generalized nodal force are obtained.Thus,the calculation method of vibration and internal sound field of an arbitrary shell-cavity structure induced by temporal-spatial random surface excitation is established.A typical vibro-acoustic coupled model of a rectangular cavity with acoustic media internally and externally,and with elastic rectangular plate on one side,is taken as example.The vibration of the elastic shell and power spectral density of the internal sound field are calculated and compared with the analytical method.The two results generally agree with the analytical one,with deviations of about 1 dB and 2 dB,respectively.The transfer matrix method has good adaptability which is not restricted by the shell-cavity structure and the shape of the inner region.     

Passive and active interior noise control of box structures using the structural intensity method

This paper presents passive and active vibro-acoustic noise control methods for attenuating the interior noise level in box structures which can be an analogy of cabins of vehicle and aircraft. The structural intensity (SI) approach is adopted to identify the predominant vibration panels and interior noise sources for box structures. In the study, the finite element method is used to determine the structural vibration and structural intensity in the box surfaces. According to structural intensity vectors plot and structural intensity stream lines presentation, the possible effective control positions where the dampers may be attached and the active control forces may act to reduce vibration and interior noise, are identified. From the study, it can be demonstrated that the structural intensity approach and stream line presentation are possible methods for identifying the vibro-acoustic interior noise source and predominant panels which may be modified to reduce the interior noise level. The structural intensity methodology, passive and active noise control results can be extended to the further study of the vibration and interior noise control of actual cabins of vehicles and aircraft.     

A Bearing Fault Diagnosis Method Based on PAVME and MEDE

When rolling bearings have a local fault, the real bearing vibration signal related to the local fault is characterized by the properties of nonlinear and nonstationary. To extract the useful fault features from the collected nonlinear and nonstationary bearing vibration signals and improve diagnostic accuracy, this paper proposes a new bearing fault diagnosis method based on parameter adaptive variational mode extraction (PAVME) and multiscale envelope dispersion entropy (MEDE). Firstly, a new method hailed as parameter adaptive variational mode extraction (PAVME) is presented to process the collected original bearing vibration signal and obtain the frequency components related to bearing faults, where its two important parameters (i.e., the penalty factor and mode center-frequency) are automatically determined by whale optimization algorithm. Subsequently, based on the processed bearing vibration signal, an effective complexity evaluation approach named multiscale envelope dispersion entropy (MEDE) is calculated for conducting bearing fault feature extraction. Finally, the extracted fault features are fed into the k-nearest neighbor (KNN) to automatically identify different health conditions of rolling bearing. Case studies and contrastive analysis are performed to validate the effectiveness and superiority of the proposed method. Experimental results show that the proposed method can not only effectively extract bearing fault features, but also obtain a high identification accuracy for bearing fault patterns under single or variable speed.     

Active modal control simulation of vibro-acoustic response of a fluid-loaded plate

Active modal control simulation of vibro-acoustic response of a fluid-loaded plate is presented. The active modal control of the vibro-acoustic response is implemented using piezoelectric actuators/sensors. The active modal damping is added to the coupled system via negative velocity feedback. The feedback gain between the piezoelectric actuators/sensors for the modal control is obtained using the in-vacuo modal matrix and the incompressible fluid-loaded modal matrix. The modal control performance of structural vibration and acoustic radiation of a baffled plate is numerically studied. It is shown that the proposed method increases the modal damping ratio and achieves reduction in the mean square velocity and the sound power for given modes of the fluid-loaded plate.     

Numerical investigation of cavitation generated by an ultrasonic dental scaler tip vibrating in a compressible liquid

Bacterial biofilm accumulation around dental implants is a significant problem leading to peri-implant diseases and implant failure. Cavitation occurring in the cooling water around ultrasonic scaler tips can be used as a novel solution to remove debris without any surface damage. However, current clinically available instruments provide insufficient cavitation around the activated tip surface. To solve this problem a critical understanding of the vibro-acoustic behaviour of the scaler tip and the associated cavitation dynamics is necessary. In this research, we carried out a numerical study for an ultrasound dental scaler with a curved shape tip vibrating in water, using ABAQUS based on the finite element method. We simulated the three-dimensional, nonlinear and transient interaction between the vibration and deformation of the scaler tip, the water flow around the scaler and the cavitation formation and dynamics. The numerical model was well validated with the experiments and there was excellent agreement for displacement at the free end of the scaler. A systematic parametric study has been carried out for the cavitation volume around the scaler tip in terms of the frequency, amplitude and power of the tip vibration. The numerical results indicate that the amount of cavitation around the scaler tip increases with the frequency and amplitude of the vibration. However, if the frequency is far from the natural frequency, the cavitation volume around the free end decreases due to reduced free end vibration amplitude.     

Phase reduction models for improving the accuracy of the finite element solution of time-harmonic scattering problems I: General approach and low-order models

This paper introduces a new formulation of high frequency time-harmonic scattering problems in view of a numerical finite element solution. It is well-known that pollution error causes inaccuracies in the finite element solution of short-wave problems. To partially avoid this precision problem, the strategy proposed here consists in firstly numerically computing at a low cost an approximate phase of the exact solution through asymptotic propagative models. Secondly, using this approximate phase, a slowly varying unknown envelope is introduced and is computed using coarser mesh grids. The global procedure is called Phase Reduction. In this first paper, the general theoretical procedure is developed and low-order propagative models are numerically investigated in detail. Improved solutions based on higher order models are discussed showing the potential of the method for further developments.     

传递矩阵法预报时空随机激励下任意薄壳腔体内部噪声

利用结构有限元结合声有限元及边界元方法,建立了任意薄壳腔体弹性壳板振动与内外声场的耦合模型,并计算了激励力与壳板振动和内部声场之间的传递矩阵;湍流边界层脉动压力具有时空随机面激励特性,引入整体形状函数矩阵,进一步推导弹性壳板广义节点力功率谱密度函数矩阵与随机面分布激励力功率谱密度函数的关系,再利用声振耦合传递矩阵,得到弹性壳板振动和内部声场功率谱密度函数与广义节点力功率谱密度函数矩阵的关系,形成随机分布激励下任意薄壳腔体结构振动及内部声场的计算方法。以典型的内外均有声介质且一面为弹性矩形板的矩形腔声振耦合模型为例,计算了弹性壳板振动和内部声场功率谱密度函数,并与解析方法进行了比较,两者基本吻合,偏差分别为1 dB和2 dB左右。传递矩阵法不受腔体结构及其内部区域形状的制约,具有良好的适用性。      

Sound transmission through finite lightweight multilayered structures with thin air layers

The sound transmission loss (STL) of finite lightweight multilayered structures with thin air layers is studied in this paper. Two types of models are used to describe the vibro-acoustic behavior of these structures. Standard transfer matrix method assumes infinite layers and represents the plane wave propagation in the layers. A wave based model describes the direct sound transmission through a rectangular structure placed between two reverberant rooms. Full vibro-acoustic coupling between rooms, plates, and air cavities is taken into account. Comparison with double glazing measurements shows that this effect of vibro-acoustic coupling is important in lightweight double walls. For infinite structures, structural damping has no significant influence on STL below the coincidence frequency. In this frequency region, the non-resonant transmission or so-called mass-law behavior dominates sound transmission. Modal simulations suggest a large influence of structural damping on STL. This is confirmed by experiments with double fiberboard partitions and sandwich structures. The results show that for thin air layers, the damping induced by friction and viscous effects at the air gap surfaces can largely influence and improve the sound transmission characteristics.     

求解水中加肋板声辐射特性的虚拟声源法*

发展一种利用虚拟声源离散声场的方法求解加肋板在水中的声振耦合问题。由波叠加原理和单元体积速度匹配的原则,根据离散的结构单元满足的动力方程和结构与介质的交界相容性条件,确定虚拟声源强度,计算结构的声辐射功率。本文以简支矩形加肋板为例,在不获得结构表面振速和声压的情况下,计算了结构在水中的声辐射功率,并与解析方法计算的结果进行了比较,表明了该方法具有较好的计算精度。     

长骨中振动声激发超声导波的方法

为了实现一定频段内任意低频下在长骨中激励导波信号,本文提出一种采用聚焦高频(5 MHz)超声换能器在长骨皮质骨中激发低频(150 kHz)超声导波的振动声方法.首先介绍了板状超声导波理论和双声束共聚焦法与单声束调幅法激发振动声的基本原理;进而采用三维有限元仿真方法分析振动声激发低频超声导波的基本现象,然后结合牛胫骨板离体实验,验证振动声激发低频超声导波的可行性.结果均表明,双声束共焦与单声束振动超声均可在骨板中激发低频超声导波.相关研究方法有助于提高空间域长骨中超声导波测量精度,以及在一定频段内实现任意频率激励等,对发展低频超声导波在体测量长骨皮质骨的新技术具有一定的指导意义.     

Fusion Domain-Adaptation CNN Driven by Images and Vibration Signals for Fault Diagnosis of Gearbox Cross-Working Conditions

The vibration signal of gearboxes contains abundant fault information, which can be used for condition monitoring. However, vibration signal is ineffective for some non-structural failures. In order to resolve this dilemma, infrared thermal images are introduced to combine with vibration signals via fusion domain-adaptation convolutional neural network (FDACNN), which can diagnose both structural and non-structural failures under various working conditions. First, the measured raw signals are converted into frequency and squared envelope spectrum to characterize the health states of the gearbox. Second, the sequences of the frequency and squared envelope spectrum are arranged into two-dimensional format, which are combined with infrared thermal images to form fusion data. Finally, the adversarial network is introduced to realize the state recognition of structural and non-structural faults in the unlabeled target domain. An experiment of gearbox test rigs was used for effectiveness validation by measuring both vibration and infrared thermal images. The results suggest that the proposed FDACNN method performs best in cross-domain fault diagnosis of gearboxes via multi-source heterogeneous data compared with the other four methods.     

Vibro-acoustic analysis of complex systems

A general method is presented for predicting the ensemble average steady-state response of complex vibro-acoustic systems that contain subsystems with uncertain, or random, properties. The method combines deterministic and statistical techniques to produce a non-iterative hybrid method that incorporates equations of dynamic equilibrium and power balance. The method is derived explicitly without reference to statistical energy analysis (SEA); however, it is seen that the wave approach to SEA can be viewed as a special case of the proposed method. The proposed method provides a flexible way to account for necessary deterministic details in a vibro-acoustic analysis without requiring that an entire system be modeled deterministically. The method therefore provides a potential solution to the mid-frequency problem (in which a system is neither entirely deterministic nor entirely statistical). The application of the method is illustrated with a numerical validation example.     

Acoustic analysis of damping structure with response surface method

Analysis of vibro-acoustic systems is challenged by their highly non-linear and complex properties, especially for the damping structure. So, an approximate response surface method (RSM) method is utilized to analysis the effect of design parameters on the sound radiation from a vibrating panel. A simple case study was illustrated to demonstrate the capabilities of the developed procedure. In details, sound radiated from vibrating panel with a point force excitation has been analyzed by numerical method. The structure-born noise problem is approximated by a series of second-degree polynomials. Three analysis objectives are considered, namely, mean quadratic velocity, sound radiation power and system loss factor. In this way, the trend of sound radiation varying with design parameters can be obtained conveniently and effectively.