High-temperature flexural strength of I-CVI processed Cf/SiC composites with variable interphases

The effect of single-layer pyrocarbon (PyC) and multilayered (PyC/SiC)_n=4 interphases on the flexural strength of un-coated and SiC seal-coated stitched 2D carbon fiber reinforced silicon carbide (C_f/SiC) composites was investigated. The composites were prepared by I-CVI process. Flexural strength of the composites was measured at 1200 °C in air atmosphere. It was observed that irrespective of the type of interphase, the seal coated samples showed a higher value of flexural strength as compared to the uncoated samples. The flexural strength of 470 ± 12 MPa was observed for the seal coated C_f/SiC composite samples with multilayered interphase. The seal coated samples with single layer PyC interphase showed flexural strength of 370 ± 20 MPa. The fractured surfaces of tested samples were analyzed in detail to study the fracture phenomena. Based on microstructure-property relations, a mechanism has been proposed for the increase of flexural properties of C_f/SiC composites having multilayered interphase.     

Mechanical properties and microstructure evolution of 3D Cf/SiBCN composites at elevated temperatures

3D C_f/SiBCN composites were fabricated by an efficient polymer impregnation and pyrolysis (PIP) method using liquid poly(methylvinyl)borosilazanes as precursor. Mechanical properties and microstructure evolution of the prepared 3D C_f/SiBCN composites at elevated temperatures in the range of 1500‐1700°C were investigated. As temperature increased from room temperature (371 ± 31 MPa, 31 ± 2 GPa) to 1500°C (316 ± 29 MPa, 27 ± 3 GPa), strength and elastic modulus of the composite decreased slightly, which degraded seriously as temperature further increased to 1600°C (92 ± 15 MPa, 12 ± 2 GPa) and 1700°C (84 ± 12 MPa, 11 ± 2GPa). To clarify the conversion of failure mechanisms, interfacial shear strength (IFSS) and microstructure evolution of the 3D C_f/SiBCN composites at different temperatures were investigated in detail. It reveals that the declines of the strength and changes of the IFSS of the composites are strongly related to the defects and SiC nano‐crystals formed in the composites at elevated temperatures.     

Microstructure and mechanical properties of quasi-isotropic chopped fiber-reinforced PyC–SiC matrix composite prepared by novel nondamaging method

In this work, quasi-isotropic chopped carbon fiber-reinforced pyrolytic carbon and silicon carbide matrix (C_f/C–SiC) composites and chopped silicon carbide fiber-reinforced silicon carbide matrix (SiC_f/SiC) composites were prepared via novel nondamaging method, namely airlaid process combined with chemical vapor infiltration. Both composites exhibit random fiber distribution and homogeneous pore size. Young's modulus of highly textured pyrolytic carbon (PyC) matrix is 23.01 ± 1.43 GPa, and that of SiC matrix composed of columnar crystals is 305.8 ± 9.49 GPa in C_f/C–SiC composites. Tensile strength and interlaminar shear strength of C_f/C–SiC composites are 52.56 ± 4.81 and 98.16 ± 24.62 MPa, respectively, which are both higher than those of SiC_f/SiC composites because of appropriate interfacial shear strength and introduction of low-modulus and highly textured PyC matrix. Excellent mechanical properties of C_f/C–SiC composites, particularly regarding interlaminar shear strength, are due to their quasi-isotropic structure, interfacial debonding, interfacial sliding, and crack deflection. In addition to the occurrence of crack deflection at the fiber/matrix interface, crack deflection in C_f/C–SiC composites takes also place at the interface between PyC–SiC composite matrix and the interlamination of multilayered PyC matrix. Outstanding mechanical properties of as-prepared C_f/C–SiC composites render them potential candidates for application as thermal structure materials under complex stress conditions.     

High-temperature properties and interface evolution of C/SiBCN composites prepared by precursor infiltration and pyrolysis

C/SiBCN composites with a density of 1.64 g/cm³ were prepared via precursor infiltration and pyrolysis and the bending strength and modulus at room temperature was 305 MPa and 53.5 GPa. The precursor derived SiBCN ceramics showed good thermal stability at 1600 °C and the SiC and Si₃N₄ crystals appeared above 1700 °C. The bending strength of the composites was 180 MPa after heat treatment at 1500 °C, and maintained at 40 MPa-50 MPa after heat treatment for 2 h at 1600 °C–1900 °C. In C/SiBCN composites, SiBCN matrix could retain amorphous up to 1500 °C and SiC grains appeared at 1600 °C but without Si₃N₄. The reason for no detection of Si₃N₄ was that the carbon fiber reacted with Si₃N₄ to form an interface layer (composed of SiC and unreacted C) and a polycrystalline transition layer (composed of B and C elements), leading to the degradation of the mechanical properties.     

Evaluation of elastic constants and high temperature tensile behaviour with damage assessment of the SiC seal-coated 2.5D Cf/SiC composites having multilayered interphase and Si-B-C added matrix

Elastic constants and tensile behaviour of chemical vapour infiltration processed 2.5D C_f/SiC composites possessing multilayered (PyC/SiC)_n=4 interphase, Si-B-C containing matrix and SiC seal-coating have been evaluated with microstructural examination and damage assessment. The strength obtained as ～187 ± 2 MPa in tensile tests at 27 °C is increased by ～18% and ～22% at 1000 °C and 1250 °C, respectively due to reduced thermal stress and increased strength of load-sharing C-fibres, which are protected from oxidation till failure by a self-healing borosilicate layer. The damage evolving during tension tests has been quantified by relating it to decrease of stress-strain slope with strain. Higher (6–8 times) elastic constants measured along fibre-axes than that obtained transversely, indicate significant anisotropy. Owing to matrix cracking with fibre-debonding and pull-out, the fibre-oriented elastic constants of tensile-fractured samples are significantly lower than those of as-received composites, and the difference scales with temperature, whereas negligible change is observed perpendicular to the fibre axes.     

Effect of PyC interphase thickness on mechanical and ablation properties of 3D Cf/ZrC–SiC composite

Three-dimensional (3D) C_f/ZrC–SiC composites were successfully prepared by the polymer infiltration and pyrolysis (PIP) process using polycarbosilane (PCS) and a novel ZrC precursor. The effects of PyC interphase of different thicknesses on the mechanical and ablation properties were evaluated. The results indicate that the C_f/ZrC–SiC composites without and with a thin PyC interlayer of 0.15 µm possess much poor flexural strength and fracture toughness. The flexural strength grows with the increase of PyC layer thickness from 0.3 to 1.2 µm. However, the strength starts to decrease with the further increase of the PyC coating thickness to 2.2 µm. The highest flexural strength of 272.3±29.0 MPa and fracture toughness of 10.4±0.7 MPa m^1/2 were achieved for the composites with a 1.2 µm thick PyC coating. Moreover, the use of thicker PyC layer deteriorates the ablation properties of the C_f/ZrC–SiC composites slightly and the ZrO₂ scale acts as an anti-ablation component during the testing.     

Fabrication process and growth mechanism of novel micro-stack PyC interphase with different textures

Pyrolytic carbon (PyC) interphase plays a crucial role in the mechanical properties of fiber-reinforced ceramic matrix composites. In this research, a novel micro-stack PyC interphase with different PyC textures was designed and fabricated by changing the deposition parameters during the chemical vapor infiltration process. The growth mechanism of the micro-stack PyC interphase with different texture were also studied by experimental characterizations and kinetic calculations, and the results show that the content ratio of (C₂H₂ + C₂H₄) to C₆H₆ gas intermediate is a key parameter to control the texture types of PyC interphase. Furthermore, the value of orientation angle (OA) value, thickness, and modulus of the micro-stack PyC interphase were further characterized by high resolution TEM (HRTEM), scanning electronic microscopy, and nanoindentation. Finally, the tensile testing of mini-C_f/PyC/SiC composites was conducted, and the results showed that the tensile strength of mini-C_f/PyC/SiC composites with micro-stack PyC interphase is approximately 40% higher than that containing single high texture PyC interphase. The improvements on the tensile strength of C_f/PyC/SiC composites prove the significant advantages of micro-stack PyC interphase.     

Interfacial optimization of SiC nanocomposites reinforced by SiC nanowires with high volume fraction

High volume fraction SiC nanowires-reinforced SiC composites (SiCNWs/SiC) were prepared by hybrid process of chemical vapor infiltration and polymer impregnation/pyrolysis in this research. SiCNWs networks are first to be made promising a high volume fraction (20 vol%), and the pyrolytic carbon (PyC) interphase with 5 nm is designed on SiCNWs surface to optimize the bonding condition between SiCNWs and SiC matrix. Nanoindentation shows a modulus of 494 ± 14 GPa of SiCNWs/SiC composites without interphase comparing to the one with PyC interphase of 452 ± 13 GPa. However, the 3-point bending test shows a higher strength of the composite with PyC interphase (273 ± 32 MPa) comparing with the one without interphase (240 ± 38 MPa). The fracture surface is observed under SEM, which shows a longer SiCNWs pullout of the composite with PyC interphase. The energy dissipation during the 3-point bending test is calculated by the length of nanowire pull-out, it demonstrates that the SiCNWs with PyC interphase possess better performance for toughening composite. Further characterization proves that the PyC interphase can give SiCNWs/SiC composites higher fracture toughness (4.49 ± 0.44 MPa·m^1/2) than the composites without interphase (3.66 ± 0.28 MPa·m^1/2).     

Ring compression properties of SiCf/SiC composites prepared by chemical vapor infiltration

SiC fiber reinforced SiC matrix (SiC_f/SiC) composites prepared by chemical vapor infiltration are one of promising materials for nuclear fuel cladding tube due to pronounced low radioactivity and excellent corrosion resistance. As a structure component, mechanical properties of the composites tubes are extremely important. In this study, three kinds of SiC_f preform with 2D fiber wound structure, 2D plain weave structure and 2.5D shallow bend-joint structure were deposited with PyC interlayer of about 150–200?nm, and then densified with SiC matrix by chemical vapor infiltration at 1050?°C or 1100?°C. The influence of preform structure and deposition temperature of SiC matrix on microstructure and ring compression properties of SiC_f/SiC composites tubes were evaluated, and the results showed that these factors have a significant influence on ring compression strength. The compressive strength of SiC_f/SiC composites with 2D plain weave structure and 2.5D shallow bend-joint structure are 377.75?MPa and 482.96?MPa respectively, which are significantly higher than that of the composites with 2D fiber wound structure (92.84?MPa). SiC_f/SiC composites deposited at 1100?°C looks like a more porous structure with SiC whiskers appeared when compared with the composites deposited at 1050?°C. Correspondingly, the ring compression strength of the composites deposited at 1100?°C (566.44?MPa) is higher than that of the composites deposited at 1050?°C (482.96?MPa), with a better fracture behavior. Finally, the fracture mechanism of SiC_f/SiC composites with O-ring shape was discussed in detail.     

Microstructure and damage evolution of SiCf/PyC/SiC and SiCf/BN/SiC mini-composites: A synchrotron X-ray computed microtomography study

SiC_f/PyC/SiC and SiC_f/BN/SiC mini-composites comprising single tow SiC fibre-reinforced SiC with chemical vapor deposited PyC or BN interface layers are fabricated. The microstructure evolutions of the mini-composite samples as the oxidation temperature increases (oxidation at 1000, 1200, 1400, and 1600?°C in air for 2?h) are observed by scanning electron microscopy, energy dispersive spectrometry, and X-ray diffraction characterization methods. The damage evolution for each component of the as-fabricated SiC_f/SiC composites (SiC fibre, PyC/BN interface, SiC matrix, and mesophase) is mapped as a three-dimensional (3D) image and quantified with X-ray computed tomography. The mechanical performance of the composites is investigated via tensile tests.The results reveal that tensile failure occurs after the delamination and fibre pull-out in the SiC_f/PyC/SiC composites due to the volatilization of the PyC interface at high temperatures in the air environment. Meanwhile, the gaps between the fibres and matrix lead to rapid oxidation and crack propagation from the SiC matrix to SiC fibre, resulting in the failure of the SiC_f/PyC/SiC composites as the oxidation temperature increases to 1600?°C. On the other hand, the oxidation products of B₂O₃ molten compounds (reacted from the BN interface) fill up the fracture, cracks, and voids in the SiC matrix, providing excellent strength retention at elevated oxidation temperatures. Moreover, under the protection of B₂O₃, the SiC_f/BN/SiC mini-composites show a nearly intact microstructure of the SiC fibre, a low void growth rate from the matrix to fibre, and inhibition of new void formation and the SiO₂ grain growth from room to high temperatures. This work provides guidance for predicting the service life of SiC_f/PyC/SiC and SiC_f/BN/SiC composite materials, and is fundamental for establishing multiscale damage models on a local scale.     

Tailoring Carbon Fiber/Carbon Nanotubes Interface to Optimize Mechanical Properties of Cf‐CNTs/SiC Composites

C_f/SiC composites were fabricated using fiber coatings including CNTs and matrix infiltration using the polymer impregnation and pyrolysis process. Interface between fiber and CNTs (CF/CNTs) was tailored to optimize mechanical properties of hybrid composites. The tailored interphases, such as Pyrocarbon (PyC) and PyC/SiC, protect fibers from degradation during the growth of CNTs successfully. Hybrid composites with well‐tailored CF/CNTs interface displayed significantly increased mechanical strength (352 ± 21 MPa) compared with that (34 ± 3 MPa) of composites reinforced with CNTs, which grown on carbon fibers directly. The interfacial bonding strength of hybrid composites was improved and optimized by tailoring the CF/CNTs interface. Interfacial failure modes were studied, and a firm interface bonding at the joint where CNTs grown was observed.     

Fabrication and optimization of 3D-Cf/HfC-SiC-based composites via sol-gel processing and reactive melt infiltration

In this work, 3D-C_f/HfC-SiC-based composites were fabricated and optimized via reactive melt infiltration (RMI) of Si into porous C_f/HfC-C preforms prepared by a sol-gel processing. The physical and chemical processes involved during the fabrication were identified and analyzed in details. It is revealed that fibers and interphase of the composites can be eroded during carbothermal reduction process, which can be further aggravated during RMI, with the formation of Hf-containing substance on the fibers surface. The fibers and interphase degradation is mainly induced by the reactions between HfO₂ and C/SiC interphase layers at elevated temperatures. Accordingly, a two-step carbothermal reduction treatment was proposed for the optimization of the fabrication procedure. As a result, less fiber/interphase erosion and improved mechanical properties are achieved in the composites, with the bending strength increased by ～49 % (from 214.1 ± 15.7 MPa to 319.0 ± 26.0 MPa).     

Vapour phase synthesis and characterisation of Cf/SiC composites with self-healing Si-B-C monolayer coating

Carbon fibre reinforced CVI-SiC matrix (C_f/SiC) composite is well known for its superior properties such as low density, high specific modulus, high fracture toughness, and high temperature mechanical properties. In the present work, 2.5-Directional C_f/SiC composites with (PyC/SiC) _n=4 multilayer interface having two different thicknesses with a density of ~2.1 g cm^-3 are prepared through isobaric isothermal chemical vapour infiltration technique. High temperature tensile properties of the prepared composites with and without Si-B-C seal coating are studied and the results are presented. Samples prepared without seal coat exhibited a K_ICof ~ 30 MPa m^1/2, and tensile strength of ≥200 MPa at room temperature. Si-B-C seal coated C_f/SiC composites has shown significant increase (28%) in high temperature tensile strength at 1200 °C and 1500 °C respectively compared to uncoated composites. Microstructural observations, XRD, and XPS studies support the observed thermomechanical behaviour of these composites at 1200 °C and 1500 °C.     

Oxidation behavior of 3D SiCf/SiBCN composites at 800–1200 °C

3D SiC_f/BN–SiC/SiBCN composites were fabricated via precursor impregnation and polymer infiltration pyrolysis (PIP). Oxidation behavior of the composites heated in air at 800 °C, 1000 °C and 1200 °C for 50 h was investigated. Following the oxidation treatment, it was found that the bending strength of the composites at different oxidation temperatures was degraded. The weight loss of the composites decreased gradually over the range of oxidation times of 1–50 h. In order to clarify the oxidation mechanism of the composites, reconstructed images, microstructures, phase compositions, the oxide layer formed on the composites and main chemical reactions were all analyzed. It was revealed that the degradation in the fracture strength of the composites was closely related to the oxidation of SiBCN matrix and BN-SiC interphase, whereas there was no signs of oxidation products about SiC fiber, which indicated that SiC fiber could be protected from oxygen by SiBCN matrix at 800?1200 °C in air.     

Processing of Cf/SiC composites by hot pressing using polymer binders followed by polymer impregnation and pyrolysis

Continuous carbon fiber (C_f) reinforced silicon carbide (SiC) matrix composite (C_f/SiC) was processed through hot pressing (HP) using polycarbosilane (PCS) in matrix and polysilazane in interphase regions as polymer binders. HP experiments were conducted at 4 MPa, 1200 °C and 1 h; followed by PCS polymer impregnation and pyrolysis (PIP) at 1200 °C under vacuum. The BN/SiC-Si₃N₄ interphase formed on the C_f cloth during BN dispersed polysilazane polymer coating and pyrolysis. The influence of PCS quantity during HP experiments on C_f/SiC composites was studied. Results suggest that sintering of SiC matrix in C_f/SiC composite improves by increasing PCS content during HP; however, high PCS content increases the liquidity of SiC-PCS mixture to flow out of the composite structure. The C_f/SiC composites with relative density ranging from 79 to 83% and flexural strength from 67 to 138 MPa was achieved.     

Preparation and tensile behavior of SiCf/SiC mini composites containing different types and thicknesses of interphase

SiC fiber-reinforced SiC matrix (SiC_f/SiC) composites are promising materials for high-temperature structural applications. In this study, KD-II SiC fiber bundles with a C/Si ratio of approximately 1.25 and an oxygen amount of 2.53%, were used as reinforcement. PyC interphase, PyC-SiC co-deposition interphase I and II, with different thicknesses, and SiC matrix were deposited into the SiC fiber bundles by using chemical vapor infiltration (CVI) to form SiC_f/SiC mini composites. When the thickness of the interphase is approximately 1000 nm, the ultimate tensile stress and strain of SiC_f/SiC mini composites with PyC-SiC co-deposition interphase I can reach 1120.0 MPa and 0.72%, respectively, which are significantly higher than those of SiC_f/SiC mini composites with a PyC interphase (740.0 MPa, 0.87%) and PyC-SiC co-deposition interphase II (645.0 MPa, 0.54%). The effect of thicknesses and types of interphase on tensile fracture behavior of mini composites and then the fracture mechanism are discussed in detail.     

Mechanical,thermal, and dielectric properties of SiCf/SiC composites reinforced with electrospun SiC fibers by PIP

Electrospun unidirectional SiC fibers reinforced SiC_f/SiC composites (e-SiC_f/SiC) were prepared with ∼10% volume fraction by polymer infiltration and pyrolysis (PIP) process. Pyrolysis temperature was varied to investigate the changes in microstructures, mechanical, thermal, and dielectric properties of e-SiC_f/SiC composites. The composites prepared at 1100 °C exhibit the highest flexural strength of 286.0 ± 33.9 MPa, then reduced at 1300 °C, mainly due to the degradation of electrospun SiC fibers, increased porosity, and reaction-controlled interfacial bonding. The thermal conductivity of e-SiC_f/SiC prepared at 1300 °C reached 2.663 W/(m∙K). The dielectric properties of e-SiC_f/SiC composites were also investigated and the complex permittivities increase with raising pyrolysis temperature. The e-SiC_f/SiC composites prepared at 1300 °C exhibited EMI shielding effectiveness exceeding 24 dB over the whole X band. The electrospun SiC fibers reinforced SiC_f/SiC composites can serve as a potential material for structural components and EMI shielding applications in the future.     

Oxidation and microstructure of SiCf/SiC composites in moist air up to 1600°C by X-ray tomographic characterization

SiC_f/SiC composites that possess PyC or BN interface layers were fabricated and then oxidized in moist air at 1000, 1200, 1400, and 1600°C. High-resolution CT was used for capturing 3D images and quantifying the SiC phase, mesophase, and voids. The oxidation behavior and microstructural evolution of SiC_f/SiC with PyC or BN interface are discussed in this study. The microstructure of the SiC_f/SiC with a PyC layer was seriously damaged in moist air at high temperature, whereas the BN interface layer enhanced the oxidation resistance of the SiC_f/SiC. These results are also confirmed by using XRD, oxidation mass gain, tensile testing, and SEM measurements. The results of the oxidation behavior and microstructural evolution for SiC_f/SiC oxidized in dry air are also compared with the results of this study. Comparing the SiC_f/SiC with a PyC interface layer, the composite with a BN interface layer oxidized in moist air exhibits a high void growth rate and a low SiO₂ grain growth rate from 1000 to 1600°C. This work will provide guidance for predicting the service life of SiC_f/SiC for multiscale damage rate models of materials at a local scale and will also provide guidance on the life service design of SiC_f/SiC materials.     

Effects of SiC/HfC ratios on the ablation and mechanical properties of 3D Cf/HfC-SiC composites

Effects of SiC/HfC ratios on the ablation and mechanical properties of 3D C_f/HfC–SiC composites by precursor impregnation and pyrolysis (PIP) process were investigated systematically. Both strength (flexural and compressive strength) and modulus increase as the SiC/HfC ratio are improved. The compact and stiff HfC-SiC matrix in addition to the carbon fiber and PyC interphase with less reaction damage accounts for the improved mechanical properties of C_f/HfC-SiC with higher SiC/HfC ratios. Meanwhile, both weight loss and erosion depth of C_f/HfC-SiC are improved with the increased SiC/HfC ratios. Therefore, in order to balance the ablation and mechanical properties, an appropriate SiC/HfC ratio should be considered.     

The mechanical,thermophysical and electromagnetic properties of UD SiCf/SiC composites in different directions

Unidirectional (UD) silicon carbide (SiC) fiber-reinforced SiC matrix (UD SiC_f/SiC) composites with CVI BN interphase were fabricated by polymer infiltration-pyrolysis (PIP) process. The effects of the anisotropic distribution of SiC fibers on the mechanical properties, thermophysical properties and electromagnetic properties of UD SiC_f/SiC composites in different directions were studied. In the direction parallel to the axial direction of SiC fibers, SiC fibers bear the load and BN interphase ensures the interface debonding, so the flexural strength and the fracture toughness of the UD SiC_f/SiC composites are 813.0 ± 32.4 MPa and 26.1 ± 2.9 MPa·m^1/2, respectively. In the direction perpendicular to the axial direction of SiC fibers, SiC fibers cannot bear the load and the low interfacial bonding strengths between SiC fiber/BN interphase (F/I) and BN interphase/SiC matrix (I/M) both decrease the matrix cracking stress, so the corresponding values are 36.6 ± 6.9 MPa and 0.9 ± 0.5 MPa?m^1/2, respectively. The thermal expansion behaviors of UD SiC_f/SiC composites are similar to those of SiC fibers in the direction parallel to the axial direction of SiC fibers, and are similiar to those of SiC matrix in the direction perpendicular to the axial direction of SiC fibers. The total electromagnetic shielding effectiveness (EM SE_T) of UD SiC_f/SiC composites attains 32 dB and 29 dB when the axial direction of SiC fibers is perpendicular and parallel to the electric field direction, respectively. The difference of conductivity in different directions is the main reason causing the different SE_T. And the dominant electromagnetic interference (EMI) shielding mechanism is absorption for both studied directions.