内蒙古东南部孔兹岩系进变质过程矿物组合演化——来自锆石中矿物包裹体的证据

采用激光拉曼技术,确认内蒙古中南部孔兹岩系锆石中保存进变质阶段矿物组合蓝晶石 钾长石 石英 磷灰石,蓝晶石 石榴石 钾长石 石英;峰期阶段矿物组合夕线石 石榴石 钾长石 石英,夕线石 石榴石 钾长石 石英 磷灰石。表明孔兹岩系在变质过程中矿物组合及相应的PT轨迹经历了自蓝晶石稳定区向夕线石稳定区的转变。     

Low-Pressure Metamorphism of Granulite Facies in an Early Proterozoic Orogenic Event in Central Inner Mongolia1

Abstract According to the kinds of feldspar and rock associations in the Al-rich gneisses, the low-pressure metamorphic crust of the Early Proterozoic granulite facies in central Inner Mongolia can be divided into southern and northern belts which are composed of six rock associations. They represent the relevant rock sequences of the layered metamorphic rock series formed under specific metamorphic temperature and pressure conditions as well as tectonic environments. Mineral inclusions and reaction texture have recorded that the medium-temperature high-pressure mineral assemblages are replaced by the high-temperature low-pressure mineral assemblages, thus, giving rise to: garnet+quartz? hypersthene+plagioclase; kyanite? sillimanite and garnet+ kyanite / sillimanite+quartz? cordierite. The deformation fabrics of the rocks, the change of mineral assemblages and the PTt path of metamorphism indicate that the contempranceous high-temperature normal-slip ductile shearing is the main cause of the formation of the low-pressure metamorphic crust of granulite facies. In the orogenic event, the co-action of thrusting and extension resulted in the change of a medium-temperature high-pressure metamorphic environment into the high-temperature low-pressure metamorphic conditions.     

Genetic Mechanism of Mineral Inclusions in Zircons from the Khondalite Series, Southeastern Inner Mongolia

The early Precambrian khondalite series is widely distributed in the Jining-Zhuozi-Fengzhen-Liangcheng area, southeastern Inner Mongolia. The khondalite series mainly consists of sillimanite garnet potash feldspar (or two-feldspar) gneiss and garnet biotite plagioclase gneiss. These gneissic rocks have commonly experienced granulite-facies metamorphism. In zircons separated from sillimanite garnet potash feldspar gneisses, many mineral inclusions, including Sil, Grt, Ky, Kfs, Qtz and Ap, have been identified by the Laser Raman spectroscopy. Generally, prograde metamorphic mineral inclusion assemblages such as Ky + Kfs + Qtz + Ap and Ky + Grt + Kfs + Qtz are preserved in the core of zircon, while peak granulite-facies metamorphic minerals including Sil + Grt + Kfs + Qtz and Sil + Grt + Kfs + Qtz + Ap are identified in the mantle and rim of the same zircon. However, in some zircons are only preserved the peak metamorphic minerals such as Sil + Grt + Kfs + Qtz and Sil + Grt + Kfs + Qtz + Ap from core to ri     

Contrasting Metamorphic Record of Heat Production Anomalies in the Penokean Orogen of Northern Michigan

It is proposed that the contrasting metamorphic mineral assemblages of the isolated amphibolite facies metamorphic highs in the Penokean orogen of northern Michigan may be caused by different heat production rates in the Archean basement. This hypothesis is based on concentrations of K, U, and Th in the Archean basement gneisses and Paleoproterozoic metasediments that indicate significant contribution of radiogenic heating during Penokean metamorphism. Heat production was anomalously high ( approximately 10.6 μWm-3) where andalusite-bearing mineral assemblages indicate that high temperatures were attained at shallow crustal levels ( approximately 550 degrees -600 degrees C at approximately 3 kbar). In contrast, where exposed metamorphic rocks indicate peak temperatures of 600 degrees -650 degrees C at 6-7 kbar, heat production in the Archean basement was lower ( approximately 3.7 μWm-3). The effect of heat production rates on the metamorphic pressure-temperature paths was tested with numerical thermal models. The calculations show (1) that if the heat production rate, where andalusite-bearing assemblages formed, was significantly <6.0 μWm-3, the estimated pressure at peak temperatures (PTmax) would be much higher and lie in the sillimanite or kyanite stability fields; and (2) differences between PTmax estimates for the metamorphic highs based on thermobarometry can be reproduced if thermal history involved significant crustal thickening as well as moderate unroofing rates.     

Transition of metamorphic series from the Kyanite- to andalusite-types in the Altai orogen, Xinjiang, China: Evidence from petrography and calculated KMnFMASH and KFMASH phase relations

Metamorphic zones in the Chinese Altai orogen have previously been separated into the kyanite- and andalusite-types, the andalusite-type being spatially more extensive. The kyanite-type involves a zonal sequence of biotite, garnet, staurolite, kyanite, sillimanite and, locally, garnet–cordierite zones. The andalusite-type zonal sequence is similar: it includes biotite, garnet and staurolite zones at lower-T conditions and sillimanite and garnet–cordierite zones at higher-T conditions, but additionally contains staurolite–andalusite and andalusite–sillimanite zones at intermediate-T conditions. As relic kyanite-bearing assemblages commonly persist in the staurolite–andalusite, andalusite–sillimanite and sillimanite zones, it is not clear that the distinction is valid. On the basis of a reevaluation of phase relations modelled in KMnFMASH and KFMASH pseudosections, kyanite and andalusite-bearing rocks of the Chinese Altai orogen record, respectively, the typical burial and exhumation history of the terrane. Mineral assemblages distributed through the various zones reflect a mix of portions of the ambient P–T array and the effects of evolving P–T conditions. The comparatively low-T biotite, garnet and staurolite zones mostly preserve kyanite-type peak assemblages that only experienced minor changes during exhumation. Rocks in the comparatively high-T sillimanite and garnet–cordierite zones are dominated by mineral assemblages of a transitional sillimanite type, having formed by the extensive modification of earlier higher pressure assemblages during exhumation. Only rocks in the intermediate-T kyanite and probably some lower sillimanite zones were clearly recrystallized by late stage andalusite metamorphism, producing the staurolite–andalusite and andalusite–sillimanite zones. This andalusite metamorphism could not reach an equilibrium state because of limited fluid availability.     

Quantitative determination of metamorphic reaction history: mass balance relations between groundmass and mineral inclusion assemblages in metamorphic rocks

Qualitative and quantitative information about metamorphic reaction history and PT paths may be obtained from mineral inclusions in garnet by comparing the mineralogy, distribution, and compositions of paragenetically-related inclusions with minerals in the groundmass assemblage. Using the algebraic technique of singular value decomposition (SVD), we document mass balance relations between inclusion and groundmass assemblages in metapelitic rocks from two metamorphic terranes that experienced different peak metamorphic conditions, and whose transition from inclusion to groundmass assemblage records different PT path segments relative to peak conditions. We calculate mass balances relating an inclusion assemblage consisting in part of armored relics of chloritoid to groundmass mineral assemblages in a kyanite-staurolite mica schist from the Solitude Range, British Columbia, and an inclusion assemblage of kyanite, staurolite, and rutile to groundmass minerals in a sillimanite-cordierite gneiss from the Skagit Gneiss, North Cascade Range, Washington. Mass balances for each rock are consistent with reaction histories inferred from petrographic observations. In the Solitude Range schist, the results of mass balance calculations are consistent with the growth of staurolite and garnet at the expense of chloritoid during prograde metamorphism and suggest that chlorite, although not preserved as an inclusion, was involved in initial staurolite growth. In the Skagit sillimanite gneiss, mass balance relations exist between the inclusion suite, which formed during high pressure metamorphism, and the associated groundmass assemblage, which equilibrated at high temperature but much lower pressure. Mass balance does not exist between the groundmass of the Skagit sillimanite gneiss and the groundmass of a nearby kyanite-staurolite schist that has been proposed as a possible lower-grade equivalent of the sillimanite-bearing rocks. These results indicate that, although compositional modification and selective preservation of minerals must be taken into account, mineral inclusion suites may nevertheless preserve enough compositional information to allow reconstruction of complete or nearly complete pre-existing assemblages. This information may not be retrievable from any other source if no lower-grade equivalents of the rocks of interest are exposed.     

Pressure-temperature Evolution of the Metapelites in the Motuo Area,the Eastern Himalayan Syntaxis

The Motuo area is located in the east of the Eastern Himalayan Syntaxis. There outcrops a sequence of high-grade metamorphic rocks, such as metapelites. Petrology and mineralogy data suggest that these rocks have experienced three stages of metamorphism. The prograde metamorphic mineral assemblages(M1) are mineral inclusions(biotite + plagioclase + quartz ± sillimanite ± Fe-Ti oxides) preserved in garnet porphyroblasts, and the peak metamorphic assemblages(M2) are represented by garnet with the lowest XSps values and the lowest XFe# ratios and the matrix minerals(plagioclase + quartz ± Kfeldspar + biotite + muscovite + kyanite ± sillimanite), whereas the retrograde assemblages(M3) are composed of biotite + plagioclase + quartz symplectites rimming the garnet porphyroblasts. Thermobarometric computation shows that the metamorphic conditions are 562–714°C at 7.3–7.4 kbar for the M1 stage, 661–800°C at 9.4–11.6 kbar for the M2 stage, and 579–713°C at 5.5–6.6 kbar for the M3 stage. These rocks are deciphered to have undergone metamorphism characterized by clockwise P-T paths involving nearly isothermal decompression(ITD) segments, which is inferred to be related to the collision of the India and Eurasia plates.     

Partial melting and decompression of the Thor-Odin dome, Shuswap metamorphic core complex, Canadian Cordillera

The Thor-Odin dome region of the Shuswap metamorphic core complex, British Columbia, contains migmatitic rocks exhumed from the deep mid-crust of the Cordilleran orogen. Extensive partial melting occurred during decompression of the structurally deepest rocks, and this decompression path is particularly well recorded by mafic boudins of silica-undersaturated, aluminous rocks. These mafic boudins contain the high-temperature assemblages gedrite+cordierite+spinel+corundum+kyanite/sillimanite±sapphirine±högbomite and gedrite+cordierite+spinel+corundum+kyanite/sillimanite+garnet±staurolite (relict)±anorthite. The boudins are interlayered with migmatitic metapelitic gneiss and orthogneiss in this region.

The mineral assemblages and reaction textures in these rocks record decompression from the kyanite zone (P>8–10 kbar) to the sillimanite–cordierite zone (P<5 kbar) at T750 °C, with maximum recorded temperatures of 800 °C. Evidence for high-temperature decompression includes the partial replacement of garnet by cordierite, the partial to complete replacement of kyanite by corundum+cordierite+spinel (hercynite)±sapphirine±högbomite symplectite, and the replacement of some kyanite grains by sillimanite. Kyanite partially replaced by sillimanite, and sillimanite with coronas of cordierite±spinel are also observed in the associated metapelitic rocks.

Partial melt from the surrounding migmatitic gneisses has invaded the mafic boudins. Cordierite reaction rims occur where minerals in the boudins interacted with leucocratic melt. When combined with existing structural and geochronologic data from migmatites and leucogranites in the region, these petrologic constraints suggest that high-temperature decompression was coeval with partial melting in the Thor-Odin dome. These data are used to evaluate the relationship between partial melting of the mid-crust and localized exhumation of deep, hot rocks by extensional and diapiric processes.     

Kyanite-bearing rocks from the Hackett River area,N.W.T.: Implications for Archean geothermal gradients

The increase in metamorphic grade toward the Hackett River gneiss dome indicates that the structural dome is also a metamorphic culmination. In pelitic rocks east of the dome, the prograde sequence is chlorite, biotite, staurolite-cordierite, sillimanite. To the southwest the sequence is andalusite-staurolite-cordierite, sillimanite. In quartzofeldspathic gneisses which are closer to the dome than the sillimanite isograd, kyanite occurs as corroded relics, cross-cut by sillimanite and rimmed by cordierite and plagioclase.The pelites were metamorphosed under regional low-pressure conditions at the same time the quartzo-feldspathic rocks underwent higher-pressure metamorphism. A lateral variation in geothermal gradient during metamorphism is postulated to account for the change in facies-series. High heat flow beneath oceanic crust produced the low-pressure assemblages in the pelites; higher-pressure assemblages formed in a region of suppressed isotherms around a relatively cool, proto-continental trondhjemitic body. Low-pressure conditions were imposed on the kyanite-bearing gneisses during continuing metamorphism and diapiric uplift.Spatial association of late Archean kyanite-bearing rocks with early Archean sodic proto-cratons has also been noted in the Churchill and Superior Provinces of Canada as well as the Rhodesian Craton.     

Progressive metamorphism of pelitic rocks from protolith to granulite facies, Dutchess County, New York, USA: constraints on the timing of fluid infiltration during regional metamorphism

A complete Barrovian sequence ranging from unmetamorphosed shales to sillimanite–K-feldspar zone metapelitic gneisses crops out in a region extending from the Hudson River in south-eastern New York state, USA, to the high-grade core of the Taconic range in western Connecticut. NNE-trending subparallel biotite, garnet, staurolite, kyanite, sillimanite and sillimanite–K-feldspar isograds have been identified, although the assignment of Barrovian zones in the high-grade rocks is complicated by the appearance of fibrolitic sillimanite at the kyanite isograd. Thermobarometric results and reaction textures are used to characterize the metamorphic history of the sequence. Pressure–temperature estimates indicate maximum metamorphic conditions of 475 °C, c. 3–4 kbar in the garnet zone to >720 °C, c. 5–6 kbar in the highest grade rocks exposed. Some samples in the kyanite zone record anomalous (low) peak conditions because garnet composition has been modified by fluid-assisted reactions. There is abundant petrographic and mineral chemical information indicating that the sequence (with the possible exception of the granulite facies zone) was infiltrated by a water-rich fluid after garnet growth was nearly completed. The truncation of fluid inclusion trails in garnet by rim growth or recrystallization, however, indicates that metamorphic reactions involving garnet continued subsequent to initial infiltration. The presence of these textures in some zones of a well-constrained Barrovian sequence allows determination of the timing of fluid infiltration relative to the P–T paths. Thermobarometric results obtained using garnet compositions at the boundary between fluid–inclusion-rich and inclusion-free regions of the garnet are interpreted to represent peak metamorphic conditions, whereas rim compositions record slightly lower pressures and temperatures. Assuming that garnet grew during a single metamorphic event, infiltration must have occurred at or slightly after the peak of metamorphism, i.e. 4–5 kbar and a temperature of c. 525–550 °C for staurolite and kyanite zone rocks.     

Contrasting P-T Paths in the Eastern Himalaya, Nepal: Inverted Isograds in a Paired Metamorphic Mountain Belt

Petrology and phase equilibria of rocks from two profiles inEastern Nepal from the Lesser Himalayan Sequences, across theMain Central Thrust Zone and into the Greater Himalayan Sequencesreveal a Paired Metamorphic Mountain Belt (PMMB) composed oftwo thrust-bound metamorphic terranes of contrasting metamorphicstyle. At the higher structural level, the Greater HimalayanSequences experienced high-T/moderate-P metamorphism, with ananticlockwise P–T path. Low-P inclusion assemblages ofquartz + hercynitic spinel + sillimanite have been overgrownby peak metamorphic garnet + cordierite + sillimanite assemblagesthat equilibrated at 837 ± 59°C and 6·7 ±1·0 kbar. Matrix minerals are overprinted by numerousmetamorphic reaction textures that document isobaric coolingand re-equilibrated samples preserve evidence of cooling to600 ± 45°C at 5·7 ±1·1 kbar.Below the Main Central Thrust, the Lesser Himalayan Sequencesare a continuous (though inverted) Barrovian sequence of high-P/moderate-Tmetamorphic rocks. Metamorphic zones upwards from the loweststructural levels in the south are: Zone A: albite + chlorite + muscovite ± biotite; Zone B: albite + chlorite + muscovite + biotite + garnet; Zone C: albite + muscovite + biotite + garnet ± chlorite; Zone D: oligoclase + muscovite + biotite + garnet ± kyanite; Zone E: oligoclase + muscovite + biotite + garnet + staurolite+ kyanite; Zone F: bytownite + biotite + garnet + K-feldspar + kyanite± muscovite; Zone G: bytownite + biotite + garnet + K-feldspar + sillimanite+ melt ± kyanite. The Lesser Himalayan Sequences show evidence for a clockwiseP–T path. Peak-P conditions from mineral cores average10·0 ± 1·2 kbar and 557 ± 39°C,and peak-metamorphic conditions from rims average 8·8± 1·1 kbar and 609 ± 42°C in ZonesD–F. Matrix assemblages are overprinted by decompressionreaction textures, and in Zones F and G progress into the sillimanitefield. The two terranes were brought into juxtaposition duringformation of sillimanite–biotite ± gedrite foliationseams (S₃) formed at conditions of 674 ± 33°C and5·7 ± 1·1 kbar. The contrasting averagegeothermal gradients and P–T paths of these two metamorphicterranes suggest they make up a PMMB. The upper-plate positionof the Greater Himalayan Sequences produced an anticlockwiseP–T path, with the high average geothermal gradient beingpossibly due to high radiogenic element content in this terrane.In contrast, the lower-plate Lesser Himalayan Sequences weredeeply buried, metamorphosed in a clockwise P–T path anddisplay inverted isograds as a result of progressive ductileoverthrusting of the hot Greater Himalayan Sequences duringprograde metamorphism. KEY WORDS: thermobarometry; P–T paths; Himalaya; metamorphism; inverted isograds; paired metamorphic belts     

The Meatiq dome (Eastern Desert, Egypt) a Precambrian metamorphic core complex: petrological and geological evidence

The Meatiq basement, which is exposed beneath late Proterozoic nappes of supracrustal rocks in the Central Eastern Desert of Egypt, was affected by three metamorphic events. The ophiolite cover nappes show only the last metamorphic overprint. The M1 metamorphic event (T ≥750 °C) is restricted to migmatized amphibolite xenoliths within the Um Ba′anib orthogneiss in the structurally lowest parts of the basement. Typical upper amphibolite facies M2 mineral assemblages include Grt–Zn-rich Spl–Qtz±Bt, Grt–Zn-rich Spl–Ms–Kfs–Bt–Sil–Qtz and locally kyanite in metasedimentary rocks. The mineral assemblages Ms–Qtz–Kfs–Sil in the matrix and Sil–Grt in garnet cores indicate that peak M2 P–T conditions exceeded muscovite and staurolite stabilities. Diffusional equilibration at M2 peak temperature conditions caused homogeneous chemical profiles across M2 garnets. Abundant staurolite in garnet rims and the matrix indicates a thorough equilibration during M2 at decreasing temperature conditions. M2 P–T conditions ranged from 610 to 690 °C at 6–8 kbar for the metamorphic peak and 530–600 °C at about 5.8 kbar for the retrograde stage. However, relic kyanite indicates pressures above 8 kbar, preceeding the temperature peak. A clockwise P–T path is indicated by abundant M2 sillimanite after relic kyanite and by andalusite after sillimanite. M2 fluid inclusions, trapped in quartz within garnet and in the quartz matrix show an array of isochores. Steepest isochores (water-rich H₂O-CO₂±CH₄/N₂ inclusions) pass through peak M2 P–T conditions and flatter isochores (CO₂-rich H₂O-CO₂±CH₄/N₂ inclusions) are interpreted to represent retrograde fluids which is consistent with a clockwise P–T path for M2. The M3 assemblage Grt–Chl in the uppermost metasedimentary sequence of the basement limits temperature to 460 to 550 °C. M3 temperature conditions within the ophiolite cover nappes are limited by the assemblage Atg–Trem–Tlc to<540 °C and the absence of crysotile to >350 °C. The polymetamorphic evolution in the basement contrasts with the monometamorphic ophiolite nappes. The M1 metamorphic event in the basement occurred prior to the intrusion of the Um Ba′anib granitoid at about 780 Ma. The prograde phase of the M2 metamorphic event took place during the collision of an island arc with a continent. The break-off of the subducting slab increased the temperature and resulted in the peak M2 mineral assemblages. During the rise of the basement domain retrograde M2 mineral assemblages were formed. The final M3 metamorphic event is associated with the updoming of the basement domain at about 580 Ma along low-angle normal faults.     

The metamorphic paragenesis of cordierite in pelitic rocks

A petrogenetic grid is constructed for mineral assemblages occurring in metapelitic rocks, particularly those involved in the paragenesis of cordierite. The most useful assemblages for estimating pressures and temperatures are staurolite-cordierite, cordierite-biotite-Al₂SiO₅ and cordierite-hypersthene. Cordierite is stable with kyanite, sillimanite or andalusite. At high pressures cordierite is Mg-rich so that pelitic rocks typically do not contain the phase. Cordierite is stable at temperatures less than 500° C but does not commonly appear in metapelitic rocks until the garnet-chlorite, chlorite-staurolite or chlorite-Al₂SiO₅ tie-lines are broken. At high metamorphic grades, the assemblage garnet-hypersthene-cordierite indicates relatively low pressures, and the assemblage hypersthene-cordierite-sillimanite relatively high pressures. It is clear however, that the absence of cordierite is of little use in characterizing a metamorphic facies unless an alternate mineral assemblage can be shown to be more stable.     

Orthopyroxene–sillimanite–quartz assemblages: distribution, petrology, quantitative P–T–X constraints and P–T paths

Granulite facies magnesian metapelites commonly preserve a wide array of mineral assemblages and reaction textures that are useful for deciphering the metamorphic evolution of a terrane. Quantitative pressure, temperature and bulk composition constraints on the development and preservation of characteristic peak granulite facies mineral assemblages such as orthopyroxene + sillimanite + quartz are assessed with reference to calculated phase diagrams. In NCKFMASH and its chemical subsystems, peak assemblages form mainly in high‐variance fields, and most mineral assemblage changes reflect multivariant equilibria. The rarity of orthopyroxene–sillimanite–quartz‐bearing assemblages in granulite facies rocks reflects the need for bulk rock X_Mg of greater than approximately 0.60–0.65, with pressures and temperatures exceeding c. 8 kbar and 850 °C, respectively. Cordierite coronas mantling peak minerals such as orthopyroxene, sillimanite and quartz have historically been used to infer isothermal decompression P–T paths in ultrahigh‐temperature granulite facies terranes. However, a potentially wide range of P–T paths from a given peak metamorphic condition facilitate retrograde cordierite growth after orthopyroxene + sillimanite + quartz, indicating that an individual mineral reaction texture is unable to uniquely define a P–T vector. Therefore, the interpretation of P–T paths in high‐grade rocks as isothermal decompression or isobaric cooling may be overly simplistic. Integration of quantitative data from different mineral reaction textures in rocks with varying bulk composition will provide the strongest constraints on a P–T path, and in turn on tectonic models derived from these paths.     

Multi-stage pseudomorphic replacement of garnet during polymetamorphism: 1. Microstructures and their interpretation

Metapelites from the southern aureole of the Vedrette di Ries tonalite (eastern Alps) were variably overprinted by contact and earlier regional metamorphic events during pre-Alpine and Alpine metamorphic cycles. In these rocks, starting from a primary garnet mica-schist (garnet stage), a complex sequence of transformations, affecting the site of the garnet, has been recognized. In the outermost part of the aureole, the primary garnet sites are occupied by nodules of kyanite (kyanite stage). Closer to the tonalite, kyanite is replaced by staurolite (staurolite stage), which in turn is pseudomorphed by muscovite (muscovite stage). The aggregates of kyanite do not overgrow garnet directly; they post-date a stage (fibrolite stage) represented by the pseudomorphic alteration of garnet into fibrolitic sillimanite plus biotite. A further sericite stage is likely to have occurred between the fibrolite and kyanite stages. Preservation of the sub-spherical garnet shape during all these transformations and persistence of mineralogical and textural relicts from earlier stages were favoured by the very low strain experienced by the rocks since the garnet stage. The textural sequence is in agreement with the metamorphic history of this part of the Austroalpine basement of the Eastern Alps: the garnet and fibrolite stages, and the coeval main foliation of the samples, are referred to the high-grade Hercynian metamorphism; the kyanite stage to the Eo-Alpine metamorphism; the staurolite and muscovite stages to the Oligocene contact metamorphism. It is suggested that kyanite growth as microgranular aggregates took place in polymetamorphic rocks where static, high- P /low- T  metamorphism overprinted high- T  assemblages that contained sillimanite or andalusite.     

辽东半岛古元古代北辽河群浪子山组巴罗式变质带分布、变质特征及其构造意义

巴罗式递增变质带能为地壳增厚及造山作用带来全新的认识.为了解辽东半岛北辽河群浪子山组内巴罗式变质带的野外分布和变质特征,对本溪地区连山关-祁家堡巴罗式变质带进行了详细的野外调查和室内研究工作.野外填图表明,浪子山组巴罗式变质带由南向北可以分为黑云母带、石榴石带、十字石带和蓝晶石带.岩相学研究表明,蓝晶石带的蓝晶十字石榴云母片岩保存了3阶段的矿物组合:（1）进变质阶段（M₁）矿物组合为Pl+Qz+Ms+Bt+Ctd+Chl±Grt;（2）峰期变质阶段（M₂）以Ky+St+Grt+Bt+Ms+Qz+Pl+Ilm为特征;（3）退变质阶段以毛发状的矽线石（M_3-1）和变斑晶边缘或裂隙处生长的绿泥石和绢云母为特征（M_3-2）.相平衡模拟表明,蓝晶十字石榴云母片岩所经历的进变质和峰期变质温压条件分别为~440℃/~3.7 kbar,~670℃/~7.9 kbar,具有典型的顺时针P-T轨迹.变质锆石U-Pb定年结果得到蓝晶十字石榴云母片岩经历了~1.96 Ga的峰期变质作用;碎屑锆石U-Pb年龄分布于2 631~2 020 Ma,浪子山组蓝晶十字石榴云母片岩碎屑物源可能来自于太古宙基底（~2.5 Ga）和2.2~2.1 Ga的岩浆岩.结合前人研究资料表明,浪子山组巴罗式变质带所记录的P-T-t轨迹以及大量的逆冲推覆构造揭示了胶-辽-吉带在~1.96 Ga经历了与造山作用相关的地壳增厚过程.      

Upper‐amphibolite facies partial melting of paragneisses from the Epupa Complex,NW Namibia,and relations to Mesoproterozoic anorthosite magmatism

The evolution of the mineral assemblages and P–T conditions during partial melting of upper‐amphibolite facies paragneisses in the Orue Unit, Epupa Complex, NW Namibia, is modelled with calculated P–T–X phase diagrams in the Na₂O–CaO–K₂O–FeO–MgO–Al₂O₃–SiO₂–H₂O system. The close concordance of predictions from the phase diagrams to petrographic observations and thermobarometric results documents that quantitative phase diagrams are suitable to explain the phase relationships in migmatitic upper‐amphibolite facies low‐ and medium‐pressure metapelites, which occur in many high‐grade metamorphic terranes worldwide. Different mineral assemblages in the migmatitic metapelites of the Orue Unit reflect regional discrepancies in the metamorphic grade: in a Northern Zone, early biotite–sillimanite–quartz assemblages were replaced via melt‐producing reactions by cordierite‐bearing assemblages. In a Southern Zone, they were replaced via melt‐producing reactions by garnet‐bearing assemblages while cordierite is restricted to rare metapelitic granofelses, which preserve Grt–Sil–Crd–Bt peak assemblages. Peak‐metamorphic conditions of 700–750 °C at 5.5–6.7 kbar in the Southern Zone and of ～750 °C at 4.5 kbar in the Northern Zone are estimated by integrating thermobarometric calculations with data from calculated mineral composition isopleths. Retrograde back‐reactions between restite and crystallizing melt are recorded by the replacement of garnet by biotite–sillimanite and/or biotite–muscovite intergrowths. Upper‐amphibolite facies metamorphism and partial melting (c. 1340–1320 Ma) in the rocks of the Southern Zone of the Orue Unit, which underwent probably near‐isobaric heating–cooling paths, are attributed to contact metamorphism induced by the coeval (c. 1385–1319 Ma) emplacement of the Kunene Intrusive Complex, a huge massif‐type anorthosite body. The lower‐pressure metapelites of the Northern Zone are interpreted to record contact metamorphism at an upper crustal level.     

Interpreting prograde-growth histories of Al2SiO5 triple-point rocks using oxygen-isotope thermometry: an example from the Truchas Mountains, USA

Oxygen‐isotope compositions of kyanite, andalusite, prismatic sillimanite and fibrolite from the Proterozoic terrane in the Truchas Mountains, New Mexico differ from one another, suggesting that these minerals did not grow in equilibrium at the Al₂SiO₅ (AS) polymorph‐invariant point as previously suggested. Instead, oxygen‐isotope temperature estimates indicate that growth of kyanite, andalusite and prismatic sillimanite occurred at c. 575, 615 and 640 °C respectively. Temperature estimates reported in this paper are interpreted as those of growth for the different AS polymorphs, which are not necessarily the same as peak metamorphic temperatures for this terrane. Two distinct temperature estimates of c. 580 °C and c. 700 °C are calculated for most fibrolite samples, with two samples yielding clear evidence of quartz‐fibrolite oxygen‐isotope disequilibrium. These data indicate that locally, and potentially regionally, oxygen‐isotope disequilibrium between quartz and fibrolite may have resulted from rapid fibrolite nucleation. Pressures of mineral growth that were extrapolated from oxygen‐isotope thermometry results and calculated using petrological constraints suggest that kyanite and one generation of fibrolite grew during M1 at 5 kbar, and that andalusite, prismatic sillimanite and a second generation of fibrolite grew during M2 at 3.5 kbar. M1 and M2 therefore represent two distinct metamorphic events that occurred at different crustal levels. The ability of the AS polymorphs to retain δ¹⁸O values of crystallization make these minerals ideal to model prograde‐growth histories of mineral assemblages in metamorphic terranes and to understand more clearly the pressure–temperature histories of multiple metamorphic events.     

High-pressure/low-temperature metamorphism in northern Hubei Province, central China

Abstract The Qinling–Dabie accretionary fold belt in east-central China represents the E–W trending suture zone between the Sino-Korean and Yangtze cratons. A portion of the accretionary complex exposed in northern Hubei Province contains a high-pressure/low-temperature metamorphic sequence progressively metamorphosed from the blueschist through greenschist to epidote–amphibolite/eclogite facies. The 'Hongan metamorphic belt'can be divided into three metamorphic zones, based on progressive changes in mineral assemblages: Zone I, in the south, is characterized by transitional blueschist–greenschist facies; Zone II is characterized by greenschist facies; Zone III, in the northernmost portion of the belt, is characterized by eclogite and epidote–amphibolite facies sequences. Changes in amphibole compositions from south to north as well as the appearance of increasingly higher pressure mineral assemblages toward the north document differences in metamorphic P–T conditions during formation of this belt. Preliminary P–T estimates for Zone I metamorphism are 5–7 kbar, 350–450°C; estimates for Zone III eclogites are 10–22 kbar, 500 ± 50°C.
The petrographic, chemical and structural characteristics of this metamorphic belt indicate its evolution in a northward-dipping subduction zone and subsequent uplift prior to and during the final collision between the Sino-Korean and Yangtze cratons.     

Granulites of the Kolpakovskaya Series in the sredinny range,Kamchatka: A myth or reality?

Geological, mineralogical, and geothermobarometric data testify that the regional metamorphism of the terrigenous protolith of the Kolpakovskaya Series, which composes the stratigraphic basement of the Kamchatka Median Crystalline Massif, corresponded to the kyanite mineral subfacies of the amphibolite facies at temperatures of 560–660°C and pressures of 5.9–6.9 kbar. This metamorphism predetermined wide kyanite development in high-Al garnet-biotite plagiogneisses. The younger granitization and migmatization of the plagiogneisses took place at a decrease in the pressure (depth), as follows from the textures of kyanite reaction replacement by andalusite in both the metamorphic rocks and the vein synmetamorphic granitoids and pegmatites. The temperature of the granitization and migmatization processes in the plagiogneisses was estimated at 620–650°C, and the pressure was evaluated at 1.9–3.0 kbar. Acid leaching that accompanied the granitization and migmatization processes resulted in the intense replacement of biotite by sillimanite (fibrolite) and, to a lesser degree, muscovite in the metamorphic and vein magmatic rocks. The highest temperature orthopyroxene-cordierite-biotite-orthoclase-plagioclase-quartz mineral assemblages were determined to have been formed in the Kolpakovskaya Series at a temperature of 830–840°C not by the regional metamorphism but in contact aureoles around gabbro-granitoid intrusions of the Lavkinskii intrusive complex of Oligocene-Miocene age in garnet-biotite and kyanite-garnet-biotite plagiogneisses of the amphibolite facies and cannot thus be regarded as evidence of an early granulite stage in the metamorphism of these rocks.