Visible Light Photocatalytic Activity of Pt/N‐TiO2 towards Enhanced H2 Production from Water Splitting

Present work mainly focuses on experimental investigation to improvement of hydrogen production by water photoelectrolysis. An experimental facility was designed and constructed for visible light photocatalysis. A series of N‐TiO₂ photocatalysts impregnated with platinum on the surface of N‐TiO₂ were prepared. Hydrogen production upon irradiating aqueous Pt/N‐TiO₂ suspension with visible light was investigated. The shift in excitation wavelength of TiO₂ was 380 nm improved the yield of hydrogen production by N‐TiO₂ and Pt/N‐TiO₂. We used a 400 W mercury arc lamp combined with a 400 nm cutoff filter eliminating all the wavelengths under 400 nm. Pt/N‐TiO₂ material was characterized with TPR, reflective UV/Visible spectroscopy and TEM. The best hydrogen production rate obtained for this setup for N/Ti = 10, 0.05 wt% Pt/N‐TiO₂, through water splitting was about 772 μmolh^?1g^?1.     

Enhanced photocatalytic hydrogen production performance of pillararene-doped mesoporous TiO2 with extended visible-light response

Pillararenes are a new type of supramolecular hosts,and they have been widely applied in drug delivery,catalysis,separation process,and sensors.However,they have rarely been used to produce hydrogen.Here,we report that pillararenes were used as functional molecules to explore photocatalysts and efficiently promoted hydrogen production from water.The most common and easily synthesized pdimethoxy pillar[5]arene（PI-OMe） was employed to form an organic-inorganic hybrid material with titanium dioxide...     

In situ FT-IR studies of NO decomposition on Pt/TiO2 catalyst under UV irradiation

Photodecomposition of NO on the well-dispersed Pt/TiO₂ catalyst under UV irradiation was studied by in situ DRIFT (Diffuse-Reflectance Infrared Fourier-Transform) spectroscopy. 2 wt% Pt/TiO₂ catalyst was prepared by photochemical deposition method. The photocatalytic activity of Pt/TiO₂ is highly dependent on its pretreatment. Although the catalyst exhibited a highly adsorption capability to NO after hydrogen reduction or thermal evacuation at 500°C, no evidence upon NO decomposition was observed under UV irradiation. While reducing the catalyst at 300°C in the hydrogen flow, it not only exhibited an intense NO adsorption but also conducted a direct decomposition of NO to N₂ and O₂ under UV irradiation. The hydrogen reduction at 200°C led to a weaker NO adsorption. During UV irradiation, the IR peaks of NO fully disappeared and N₂O was formed. It is concluded that the photochemical prepared Pt/TiO₂ catalyst after activating at mild reduction conditions is highly active for NO photodecomposition. The effective oxidation states of the active components, the surface structure and the reaction mechanisms will be discussed.     

Au改性TiO2纳米复合物对人结肠癌细胞的光催化杀伤作用

提出了通过TiO₂表面修饰纳米Au的方法来提高纳米TiO₂光催化杀伤癌细胞的效率. 采用化学还原法合成了Au改性的TiO₂ (Au/TiO₂)纳米复合物, 并研究了不同掺杂量(1 wt%, 2 wt%, 4 wt%)的Au/TiO₂对人结肠癌LoVo细胞的光催化杀伤效应. 结果显示, Au的掺杂大大地提高了TiO₂纳米粒子光催化杀伤结肠癌LoVo细胞的效率, 而且Au掺杂量的高低影响Au/TiO₂光催化杀伤癌细胞的效率, 掺金量为2%的Au/TiO₂对结肠癌LoVo细胞具有最高的光催化杀伤效率. 在光强为1.8 mW/cm²的紫外灯(λ_max＝365 nm)下光照110 min, 50 μg/mL掺金量为2%的Au/TiO₂能够杀死所有的癌细胞, 而同样浓度的TiO₂只能杀死70%的癌细胞.     

Ethanol electro-oxidation on catalysts with TiO2 coated carbon nanotubes as support

Pt–TiO₂/CNTs electrocatalysts for direct ethanol fuel cells (DEFCs) were prepared by sol–gel and ethylene glycol reduction method. XRD and TEM showed that the size of the Pt particles on TiO₂/CNTs is 3.5–4 nm and with narrow particle size distribution. HRTEM revealed that a thin layer of uniform amorphous TiO₂ on CNTs was formed and the faces of the Pt crystal on Pt–TiO₂/CNTs catalysts were quite “rough” and “rounded” and some grain bounders and/or twins also appeared. The electrochemical studies using cyclic voltammetry (CV), chronoamperometry and CO stripping voltammetry indicate that Pt–TiO₂/CNTs catalysts have higher electro-catalytic activity and CO-tolerance for ethanol oxidation than Pt/C (20 wt% Pt, E-TEK) and Pt/CNTs catalyst in acid. The Pt/TiO₂ molar ratio was also optimized and proved that 1:1 was the best Pt/TiO₂ molar ratio.     

Solar hydrogen production. Significant effect of Na2CO3 addition on water splitting using simple oxide semiconductor photocatalysts

Recent progress in photocatalytic decomposition of water to H₂ and O₂ using simple oxide semiconductor catalysts has been reviewed. Addition of Na₂CO₃ to Pt/TiO₂ suspension in water enhanced the stoichiometric decomposition significantly. This Na₂CO₃ addition method has been proved to be very useful to accelerate water splitting over various kinds of oxide semiconductor photocatalysts. The role of CO₃ ^2– anion on the acceleration of water splitting was clarified. Finally, it was firstly demonstrated in the world that water was decomposed efficiently and stoichiometrically to H₂ and O₂ using a 3 wt% NiOx/TiO₂ photocatalyst under real solar light irradiation in Tsukuba, Japan by this Na₂CO₃ addition method.     

Reaction of oxygen with adsorbed hydrogen species of a reduced Pt/TiO2 catalyst

Reaction of oxygen with the adsorbed hydrogen species of Pt/TiO₂ catalysts reduced in the temperature range of RT-773 K has been studied by temperature-programmed oxidation (TPO). It is obtained that the Pt-assisted reaction of oxygen with both the surface hydroxy groups and titanium hydride species occurs in the temperature range of 320–450 K; direct oxidation of the surface hydrogen species takes place on the surface of TiO₂ in the temperature range of 500–600 K; and oxygen reacts with the stored hydrogen species in the sublayer and bulk of the TiO₂ support when the temperature was increased to above 600 K.     

电镀法制备Pt/TiO2纳米管电极及其电催化析氢性能

采用阳极氧化法制备得到锐钛矿型二氧化钛(TiO₂)纳米管阵列,在其表面通过电镀法沉积Pt,得到了低铂的Pt/TiO₂纳米管电极(Pt/TiO₂?NTs)。通过扫描电子显微镜和透射电子显微镜对其进行形貌表征后发现,Pt较为均匀地分布于TiO₂纳米管阵列中。进一步的电催化析氢结果表明,Pb/TiO₂?NTs在10 mA·cm^-2时,过电位为0.079 V,塔菲尔斜率为42.7 mV·dec-1,较Pt/TiO₂致密膜电极(Pt/TiO₂?F)以及商业Pt/C催化剂显示了更为优异的催化活性。同时,在长循环稳定性测试(3000个周期)中,Pb/TiO₂?NTs相较于上述2种对比电极显示了更为优异的稳定性。     

Ultradeep Hydrodesulfurization of Dibenzothiophene (DBT) Derivatives over Mo-Sulfide Catalysts Supported on TiO2-Coated Alumina Composite

The present paper reviews in detail the different studies now being conducted by our research team concerning the ultradeep hydrodesulfurization (HDS) of dibenzothiophene (DBT) derivatives over Mo/TiO₂ and Mo/TiO₂–Al₂O₃ catalysts. First, a detailed characterization of Mo/TiO₂ (P-25 Degussa, 50 m²/g) catalysts prepared by equilibrium adsorption technique shows that Mo- species are highly and uniformly dispersed on the surface of titania up to 6.6 wt% MoO₃ loading. Above this value, some aggregation of Mo occurs, leading to the formation of bulk MoO₃. Below 6.6 wt% MoO₃ loading, the Raman spectroscopy data of the calcined samples show that the supported Mo-species possess a highly distorted octahedral MoO₆ structure. TiO₂–Al₂O₃ composites were prepared by chemical vapor deposition (CVD) using TiCl₄ as a precursor. Using several characterization techniques, we demonstrated that the support composite presents a high dispersion of TiO₂ over -Al₂O₃ without forming precipitates up to ca. 11 wt% loading. Moreover, the textural properties of the composite support are comparable to those of alumina. Under the present sulfidation conditions (673 K, 5%H₂S/95%H₂), Mo-species supported on TiO₂ are better sulfided than on alumina, as demonstrated using XPS. This can be attributed to the relatively lower interaction between Mo-species and titania. The state of sulfide species supported on the composite support can be considered as a transition state between TiO₂ and Al₂O₃. However, at relatively higher TiO₂ loadings (ca. 11 wt%), Mo/TiO₂–Al₂O₃ catalysts exhibit sulfidability similar to that of Mo/TiO₂. The HDS tests conducted in both the laboratory and in industry show that sulfide catalysts supported on TiO₂–Al₂O₃ (ca. 11 wt% TiO₂) are more active than those supported on TiO₂ or Al₂O₃.     

Formation of appropriate sites on nanofiltration membrane surface for binding TiO2 photo-catalyst: Performance, characterization and fouling-resistant capability

Titanium dioxide (TiO₂) nanoparticles were assembled on the surface of nanofiltration blend membrane. For settling TiO₂ on the membrane surface, two membrane categories were used: (i) unmodified polyethersulfone (PES)/polyimide (PI) blend membrane, and (ii) –OH functionalized PES/PI blend membrane with different concentrations of diethanolamine (DEA). These membranes were radiated by UV light after TiO₂ depositing with different concentrations. 15 min immersion in colloidal suspension and 15 min UV irradiation with 160 W lamps were used for modification. The modification resulted in the formation of a photo-catalytic property with enhanced membrane hydrophilicity. The self-assembly of TiO₂ nanoparticles was established through coordinance bonds with –OH functional groups on the membrane surface. A comparison between the UV irradiated TiO₂ deposited blend membrane and deposited-functionalized blend membranes showed that –OH groups originate excellent adhesion of TiO₂ nanoparticles on the membrane surface, increase reversible deposition, and diminish irreversible fouling. The membranes were characterized using SEM, FTIR, EDX, contact angle, cross flow filtration, and antifouling measurements. SEM images show that the presence of –OH groups on the DEA-modified membrane surface is the main parameter for extra uniformly settlement of TiO₂ nanoparticles on the membrane surface. This procedure is a superior technique for modification of PES/PI nanofiltration membranes to enhance water flux and minimization membrane fouling.     

DFT study of difference caused by catalyst supports in Pt and Pd catalysis of oxygen reduction reaction

Based on an experimental phenomenon that catalytic activity of Pt and Pd for oxygen reduction reaction (ORR) changes with catalyst supports from C to TiO₂, density function theory (DFT) was used to elucidate the cause behind the difference in catalysis caused by catalyst supports. First, factors closely associated with the first electron transfer of the ORR were assessed in the light of quantum chemistry. Then intermediate (atomic oxygen, O) adsorption strength on the catalyst surface was calculated. The results show that, in terms of minimum energy difference, the best orbital symmetry match, and the maximum orbital overlap, TiO₂ does bring about a very positive effect on catalysts Pd/TiO₂ for the first electron transfer of the ORR. Especially, TiO₂ remarkably expands the space size of Pd/TiO₂ HOMO orbital and improves orbital overlap of Pd/TiO₂ HOMO and O₂ LUMO. The analysis of deformation density and partial density of state shows that the strong interaction between Pt and Ti leads to a strong adsorption of intermediate O on Pt/TiO₂, but the strong interaction between Pd and surface O causes positive net charge of Pd and a weak adsorption of intermediate O on Pd/TiO₂. Thus, the ORR can proceed more smoothly on Pd/TiO₂ than Pt/TiO₂ in every respect of maximum orbital overlap and rate delay by intermediate O. The research also discloses that several factors lead to less activity of TiO₂-supported Pt and Pd catalysts than the C-supported ones for the ORR. These factors include the poor dispersion of Pt and Pd particles on TiO₂, poor electric conduction of TiO₂ carrier itself, and bigger energy difference between HOMO of TiO₂-carried metallic catalysts and LUMO of O₂ molecule due to electrons deeply embedded in the semiconductor TiO₂ carrier. Supported by the National Natural Science Foundation of China (Grant No. 20676156), the Chinese Ministry of Education (Grant No. 307021), the National 863 Program (Grant Nos. 2006AA11A141 and 2007AA05Z124), and the Chongqing Sci &Tech Key Project (Grant No. CSTC2007AB6012)     

Carbon/titanium oxide supported bimetallic platinum/iridium nanocomposites as bifunctional electrocatalysts for lithium-air batteries

Platinum (Pt) and iridium (Ir) catalysts are well known to strongly enhance the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) kinetics, respectively. Pt–Ir-based bimetallic compounds along with carbon-supported titanium oxides (C–TiO₂) have been synthesized for the application as electrocatalysts in lithium oxygen batteries. Transition metal oxide-based bimetallic nanocomposites (Pt–Ir/C–TiO₂) were prepared by an incipient wetness impregnation technique. The as-prepared electrocatalysts were composed of a well-dispersed homogenous alloy of nanoparticles as confirmed by X-ray diffraction patterns and Fourier transform scanning electron microscopy analyses. The electrochemical characterizations reveal that the Pt–Ir/C–TiO₂ electrocatalysts were bifunctional with high activity for both ORR and OER. When applied as an air cathode catalyst in lithium-air batteries, the electrocatalyst improved the battery performance in terms of capacity, reversibility, and cycle life compared to that of cathodes without any catalysts.     

TiO2/Cu2O/Pt复合空心微球的制备及其光催化性能

以锐钛矿相TiO₂溶胶为基底,采用沉淀法和液相沉积法制备了TiO₂/Cu₂O/Pt复合空心微球,通过改变n₍Ti⁴⁺)∶n_Cu2+和H₂Pt Cl₆·6H₂O溶液的加入量对TiO₂的形貌和结构进行调控,采用不同的方法对不同样品的物相及结构、微观形貌和光学性能进行了对比分析。分析结果表明,复合材料中Pt与Cu₂O的引入产生协同效应,不仅在一定程度上阻止了电子-空穴的复合,还降低了禁带宽度,在可见光区域光吸收明显增强。与TiO₂、Cu₂O和TiO₂/Cu₂O光催化剂相比较,TiO₂/Cu₂O/Pt降解有机污染物的能力显著增强,首次光照120 min可降解93%的甲基橙(MO)溶液,4次循环后降解率为71%,具有良好的光催化...     

TiO2/Cu2O/Pt复合空心微球的制备及其光催化性能

以锐钛矿相TiO₂溶胶为基底,采用沉淀法和液相沉积法制备了TiO₂/Cu₂O/Pt复合空心微球,通过改变n_Ti⁴⁺∶ n_Cu²⁺和H₂PtCl₆·6 H₂O溶液的加入量对TiO₂的形貌和结构进行调控,采用不同的方法对不同样品的物相及结构、微观形貌和光学性能进行了对比分析。分析结果表明,复合材料中Pt与Cu₂O的引入产生协同效应,不仅在一定程度上阻止了电子-空穴的复合,还降低了禁带宽度,在可见光区域光吸收明显增强。与TiO₂、Cu₂O和TiO₂/Cu₂O光催化剂相比较,TiO₂/Cu₂O/Pt降解有机污染物的能力显著增强,首次光照120 min可降解93%的甲基橙(MO)溶液,4次循环后降解率为71%,具有良好的光催化稳定性能。     

Band Structure Engineering of Single Pt Atoms on Fe−TiO2 for Enhanced Photocatalytic Performance

Single atomic site catalysts display the maximal atom-utilization efficiency, unique structural properties, and remarkable enhancements on catalytic activity. Herein, single Pt atoms loaded Fe−TiO₂ catalysts were prepared. Fe³⁺ doping leads to the formation of oxygen vacancies and improve the interaction between TiO₂ and Pt. Single Pt atoms are thus anchored and effectively modify the local energy band structure of TiO₂. The optimized local band structures improve the intrinsic photoexcitation of Pt/Fe−TiO₂, promote the separation of photogenerated carriers, and extend the lifetime of photogenerated carriers. Meanwhile, the electrons transfer from the excited dyes to the conduction band edge of Pt/Fe−TiO₂ is also facilitated due to the shift-down of the conduction band edge. Therefore, with the increase of the Pt content (till up to 0.6 wt%), the photocatalytic performance of Pt/ Fe−TiO₂ with the confined single Pt atoms is significantly boosted in either the intrinsic or the sensitized photocatalytic process.     

Pt/TiO2催化剂上CO氧化反应动力学研究

利用沉积沉淀法制备了Pt/TiO₂催化剂, 将其在不同温度下焙烧, 以得到不同颗粒尺寸的Pt. 并将这些样品用于CO催化氧化反应以及反应动力学研究. 结果表明: 焙烧温度对催化剂有明显影响, Pt 颗粒尺寸随着焙烧温度的升高而增加; 与此同时, CO催化活性随焙烧温度的升高呈先增加后降低的趋势, 其中, 400℃焙烧的样品表现出最高的催化活性. 反应动力学结果表明, 催化剂上CO氧化反应表观速率方程为r=5.4×10^-7p_CO^0.17p_O2^0.36,说明在该催化剂上CO氧化遵循Langmuir-Hinshelwood机理. 同时, 对催化剂进行了CO化学吸附红外光谱和O₂化学吸附表征. 结果表明, 随着焙烧温度的升高, 催化剂上CO和O₂吸附量均呈现先升高后降低的趋势, 这与反应结果和反应动力学方程一致, 说明反应受到催化剂表面上CO和O₂吸附浓度的影响. 而在400℃焙烧的催化剂上, CO和O₂吸附量均最高, 因此其反应活性也最好. 这可能是焙烧过程影响了Pt 和TiO₂之间的相互作用引起的.     

Hydrogen desorption of reduced Pt/TiO2 catalyst

The temperature-programmed desorption of hydrogen from a Pt/TiO₂ catalyst reduced in a wide temperature range (RT-773 K) has been studied. It is found that the presence of labile surface oxygen species increases the amount of hydrogen species formed at room temperature, and greatly decreases the quantities of adsorbed hydrogen species at medium temperatures. After the catalyst was reduced at high temperature, it is observed that two strong hydrogen desorption peaks appear at 450–600 K and above 600 K, which are ascribed to surface titanium hydride and the hydrogen species stored in the sublayer and bulk of the support, respectively.     

Evaluation of polymeric nanocomposites for the detection of toxic gas analytes

Four different metal oxide nanoparticles, copper oxide (CuO), aluminum oxide (Al₂O₃), nickel oxide (NiO), and titanium dioxide (TiO₂), were added to poly (2,5-dimethyl aniline) (P25DMA) during synthesis to create different polymer nanocomposites. These polymer nanocomposites were evaluated as potential sensing materials for six different gas analytes (acetaldehyde, acetone, benzene, ethanol, formaldehyde, and methanol). It was found that CuO did not incorporate into the P25DMA and only a small percentage of Al₂O₃ was incorporated. However, both NiO and TiO₂ were incorporated into the P25DMA at the same concentration as during the synthesis step. Overall, the type of metal oxide significantly affected the morphology of the sensing material and the amount of each analyte sorbed. For example, P25DMA doped with 5 wt% Al₂O₃ had high selectivity towards ethanol, whereas P25DMA doped with 20 wt% TiO₂ sorbed the most ethanol. However, P25DMA doped with 20 wt% TiO₂ also sorbed a high amount of formaldehyde, making P25DMA doped with 20 wt% TiO₂ less selective than P25DMA doped with 5 wt% Al₂O₃ towards ethanol with respect to formaldehyde.     

低温静电自组装法制备贵金属修饰TiO_2纳米结构薄膜及其增强的光催化性能(英文)

以碱-水热法在金属Ti片上原位生长了TiO2纳米结构(纳米花和纳米线)薄膜,并采用低温静电自组装方法将超细贵金属(金、铂、钯)纳米颗粒均匀沉积于多孔TiO2薄膜上.负载于Ti片上的贵金属/TiO2纳米结构薄膜具有一体化结构、多孔架构和高光催化活性.超高分辨率场发射扫描电子显微镜(FESEM)直接观察表明贵金属纳米颗粒在TiO2表面分布均匀,且颗粒之间相互分离,金、铂、钯纳米颗粒的平均粒径分别约为4.0、2.0和10.0nm.俄歇电子能谱(AES)纵深成分分析表明贵金属不仅沉积于薄膜表面,且大量分布于TiO2纳米结构薄膜内部,其深度超过580 nm.X射线光电子能谱(XPS)分析表明,经300°C下在空气中热处理后,纳米金仍保持金属态,纳米铂部分被氧化成PtOabs,而钯粒子则完全被氧化成氧化钯(PdO).以低温静电自组装法沉积贵金属,贵金属负载量可通过调节组装时间与溶胶pH值来控制.光催化降解甲基橙的结果表明,沉积的纳米金和铂能显著增加TiO2纳米结构薄膜的光催化活性,说明金和铂粒子可促进光生载流子的分离;但负载的PdO对TiO2薄膜的光催化性能增强几乎无作用.     

Influences of the H2PtCl6 Solution's pH on the Photocatalytic Activities of Platinum-Loaded TiO2 Nanotubes

By using H₂PtCl₆ and titanate nanotubes as precursor, platinum-loaded TiO₂ nanotubes (Pt/TiO₂NTs) are prepared at different pH by deposition-precipitation method. The prepared materials are characterized with powder x-ray diffraction (XRD) and x-ray photoelectron spectra (XPS). Their photocatalytic performance is evaluated by the degradation rates of methyl orange solution under UV-vis light irradiation. Obtained results indicate that the pH of H₂PtCl₆ solution has obvious influence on the catalytic performance of Pt/TiO₂NTs.