Studies of the roles of Sn or Fe on γ-Al2O3-supported Pt catalysts by CO adsorption microcalorimetry and dehydrogenation reaction of C4 alkanes

CO adsorption microcalorimetry was employed in the study of γ-Al₂O₃-supported Pt, Pt-Sn and Pt-Fe catalysts. The results indicated that the initial differential heat of CO adsorption of the Pt/γ-Al₂O₃ catalyst was 125 kJ/mol. As CO coverage increased, the differential heat of adsorption decreased. At higher coverages, the differential heat of adsorption decreased significantly. 60% of the differential heat of CO adsorption on the Pt/γ-N₂O₃ catalyst was higher than 100 kJ/mol. No significant effect on the initial differential heat was found after adding Sn and Fe to the Pt/γ-Al₂O₃ catalyst. The amount of strong CO adsorption sites decreased, while the portion of CO adsorption sites with differential heat of 60–110 kJ/mol increased after increasing the Sn or Fe content. This indicates that the surface adsorption energy was changed by adding Sn or Fe to Pt/γ-N₂O₃. The distribution of differential heat of CO adsorption on the Pt-Sn(C)/γ-Al₂O₃ catalyst was broad and homogeneous. Comparison of the dehydrogenation performance of C₄ alkanes with the number of CO adsorption sites with differential heat of 60–110 kJ/mol showed a good correlation. These results indicate that the surface Pt centers with differential heats of 60–110 kJ/mol for CO adsorption possess superior activity for the dehydrogenation of alkanes. Project supported by FORD and the National Natural Science Foundation of China (Grant No. 09412302) and the Transcentury Training Program Foundation for the Talents by The State Education Commission of China.     

Infrared absorption spectra of Er3+-doped Al2O3 nanopowders by the sol-gel method

The Er³⁺-doped Al₂O₃ nanopowders have been prepared by the sol-gel method, using the aluminium isopropoxide [Al(OC₃H₇)₃]-derived γ-AlOOH sols with addition of the erbium nitrate [Er(NO₃)₃·5H₂O]. The five phases of γ-(Al,Er)₂O₃, θ-(Al,Er)₂O₃, α-(Al,Er)₂O₃, ErAlO₃, and Al₁₀Er₆O₂₄ were detected with the 0–20 mol% Er³⁺-doped Al₂O₃ nanopowders at the different sintering temperature of 600–1200°C. The average grain size was increased from about 5 to 62 nm for phase transformation of undoped γ-Al₂O₃→α-Al₂O₃ at the sintering temperature from 600 to 1200°C. At the same sintering temperature, average grain size was decreased with increase of the Er³⁺ doping concentration. Infrared absorption spectra of γ-Al₂O₃ and θ-Al₂O₃ nanopowders showed the two broad bands of 830–870 and 550–600 cm⁻¹, the three broad bands of 830–870, 750–760, and 550–600 cm⁻¹, respectively. The infrared absorption spectra for the α-Al₂O₃ nanopowder showed three characteristic bands, 640, 602, and 453 cm⁻¹. The two characteristic bands of 669 and 418 cm⁻¹ for Er₂O₃ clusters were observed for the Er³⁺-doped Al₂O₃ nanopowders when Er³⁺ doping concentration was increased up to 2 mol%. The 796, 788, 725, 692, 688, 669, 586, 509, 459, and 418 cm⁻¹ are the characteristic bands of Al₁₀Er₆O₂₄ phase.     

Calorimetric Characterization of Surface Reactivity of Supported Ga2O3 Catalysts

The surface properties of supported gallium oxide catalysts prepared by impregnation of various supports (γ-Al₂O₃, SiO₂, TiO₂, ZrO₂) were investigated by adsorption microcalorimetry, using ammonia and water as probe molecules. In the case of acidic supports (γ-Al₂O₃, ZrO₂, TiO₂), the acidic character of supported gallium catalysts always decreased in comparison with gallium-free supports; on very weakly acidic SiO₂, new acidic centers were created when depositing Ga₂O₃. The addition of gallium oxide decreased the hydrophilic properties of alumina, titania and zirconia, but increased the amount of water adsorbed on silica. The catalytic performances in the selective catalytic reduction of NO by C₂H₄ in excess oxygenwere in the order Ga/Al₂O₃>Ga/TiO₂>Ga/ZrO₂>>Ga/SiO₂. This order is more related to the quality of the dispersion of Ga₂O₃ on the support than to the global acidity of the solids. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effect of conversion of NO2 into no on the catalytic reduction of NO2 with C3H6 in excess O2

During the reduction of NO₂ by C₃H₆ in O₂ over alumina-supported Au, Rh and Pt it was found that three parallel reactions take place,i.e., reduction of NO₂ to N₂ and N₂O, partial decomposition of NO₂ to NO and oxidation of C₃H₆ to CO and CO₂. In the absence of C₃H₆, the NO₂→NO+O₂ reaction reaches a fast equilibrium on Rh and Pt but not on Au and γ-Al₂O₃. Addition of C₃H₆ to the NO₂+O₂ mixture leads to the formation of NO above equilibrium conversion levels.     

Pt LIII-edge XANES and EXAFS studies on γ-Al2O3 supported Pt catalysts

Pt L_III-edge XANES and EXAFS were employed to investigate the nature of Pt/γ-Al₂O₃, Pt−Sn/γ-Al₂O₃ and Pt−Fe/γ-Al₂O₃ catalysts. The results indicated that Pt species on these catalysts were all in the oxidized states before reduction, and in the metallic states after reduction. The dispersity of the Pt species on the catalysts was very high after reduction. The electronic properties of the highly dispersed Pt species were different from that of the bulk Pt in large crystallites. An interaction between Pt and the metal-oxide modified γ-Al₂O₃ support is proposed. The interaction improved the dispersity of the Pt species on the catalysts and is thought to be the reason for the enhanced activity and selectivity for dehydrogenation reactions over these catalysts.     

Probing the surface acidity of modified γ-alumina with1H and15N high-resolution solid state NMR spectroscopy

¹H MAS NMR and¹⁵N NMR studies of adsorbed N₂ and N₂O molecules were used to characterize Br?nsted and Lewis acidic sites of unmodified γ-Al₂O₃ and γ-Al₂O₃ modified with NaOH. Changes in the concentrations of surface hydroxyls with the increase in the number of more “basic” OH groups for NaOH/γ-Al₂O₃ have been found by¹H MAS NMR experiments. Two different types of Lewis acidic sites in γ-Al₂O₃ have been revealed using¹⁵N NMR studies. The strongest sites are poisoned even at small NaOH concentrations (ca. 0.05 wt.%). Not only the number of electron-accepting sites but also their strength are supposed to decrease for modified γ-alumina.     

Catalytic properties of Pt/Al<Subscript>2</Subscript>O<Subscript>3</Subscript> catalysts in the aqueous-phase reforming of ethylene glycol: Effect of the alumina support

The influence of the alumina support on the catalytic activity of Pt/Al₂O₃ catalysts in aqueous phase reforming of ethylene glycol to hydrogen was studied. The catalysts were prepared by impregnation of γ-, δ-, and α-alumina with H₂PtCl₆. The highest rate of hydrogen production (452 μmol min⁻¹ g⁻¹) obtained with the Pt/α-Al₂O₃ catalyst can be related to the highest extent of dispersion of Pt on α-Al₂O₃. XPS, TEM-EDX and TPR-H₂ measurements showed the absence of chloride-containing surface complexes in the Pt/α-Al₂O₃ catalyst. However, chloride-containing entities were found on the surface of Pt/γ-Al₂O₃ and Pr/δ-Al₂O₃ catalysts. When chloride ions are removed chlorinated Pt species facilitate the sintering of Pt crystallites and in this way affect the extent of Pt dispersion. Moreover, depending upon the particular crystalline form, alumina atoms have different coordination and alumina surfaces contain varying amounts of OH groups of different nature which affect the interaction between Pt and the support.     

Formation of partially inverse Mg−Al spinel by grinding MgO with γ-Al2O3

Spinel (MgAl₂O₄) was synthesized mechanochemically (MC) by grinding MgO with γ-Al₂O₃ up to 10 hours. Examination of the MC product by neutron diffraction and infrared spectroscopy showed that it has a higher degree of inversion than its thermally produced counterpart—47% as against 10% respectively. X-ray studies showed that MgAl₂O₄ crystallites grow equidimensionally at a much higher rate than in the case of α-Al₂O₃. The higher degree of inversion and higher formation rate when γ-Al₂O₃ is used, is attributed to similarities in oxygen framework of MgO, Al₂O₃ and spinel and to the higher retention of the cations coordination number. The equidimensional growth is attributed to the presence of multiple soft modes, the {111} planes. Deceased.     

Structural and spectroscopic characterization of Al2−x Cr x O3 powders obtained by polymeric precursor method

Al₂O₃ and Al_2−x Cr _x O₃ (x = 0.01, 0.02 and 0.04) powders have been synthesized by the polymeric precursors method. A study of the structural evolution of crystalline phases corresponding to the obtained powders was accomplished through X-Ray Diffraction and UV-vis spectroscopy (reflectance spectra and CIEL^*a^*b^* color data). The obtained results allow to identify the γ-Al₂O₃ to α-Al₂O₃ phase transition. The single-phase α-Al₂O₃ powder was obtained after heat treatment at 1050 °C for 2 h. The results show that the green to red color transition and ruby luminescence lines observed for the powders of Al_2−x Cr _x O₃ are related to the γ to α-Al₂O₃ phase transition and the temperature and time range for such transition depends on the chromium content.     

Effect of Thermal Activation of Supported Catalysts Pt/MeOx,Where MOx = Al2O3, CeO2, La2O3, and ZrO2, for Complete Oxidation

A sharp increase in the atomic catalytic activity (ACA) of supported platinum catalysts in the model reaction of n-pentane complete oxidation is found on going from the preliminary calcination temperature of 500–600°C to a temperature of 700°C. ACA increases by an order of magnitude for the Pt/-Al₂O₃ system, 3 times for Pt/ZrO₂, and 1.5 times for Pt/CeO₂. The per-gram activities of all catalysts decrease because of a decrease in the dispersion of supported platinum with an increase in the temperature of preliminary calcination.     

Study of CuCl2 Supported on SiO2 and Al2O3

The nature and stability of surface species of CuCl₂ supported on α-Al₂O₃, γ-Al₂O₃, and SiO₂ were investigated by using X-ray diffraction techniques and reflectance spectroscopy. No specific chemical interaction of CuCl₂ is observed on an inert α-Al₂O₃ support, as opposed to hydrated carriers as SiO₂ and γ-Al₂O₃. On these supports the coordination sphere of Cu²⁺ consists of surface groups (OH^? or O^? at drying and activation, resp.), H₂O and Cl^?, with the H₂O ligands decreasing in concentration in the process of impregnation, drying and calcination. γ-Al₂O₃ samples, calcined at 400°C, show γ-Cu₂(OH)₃Cl as opposed to CuAl₂O₄ at higher temperatures. The absence of Cu₂(OH)₃Cl on SiO₂-supported samples is related to the acid-base characteristics of the carriers. The various supports can be arranged in the following order of stability of the complexes formed: γ-Al₂O₃ > SiO₂ ? -Al₂O₃.     

Sorption behavior of γ-irradiated α-Al2O3

Irradiation of α-Al₂O₃ (Corundum) was carried out in contact with acidic media and with different doses (100-to-2500 kGy) and dose-rates (0.9, 2.6 and 6.1 kGy·h⁻¹) of γ-rays. Simultaneously parallel experiments were carried out using the same procedure, but preheated at 150°C for two days and then irradiated without acidic media. The solid thus obtained was used to determine the effect of γ-irradiation on the sorption capacities of microamounts of fission products from strongly alkaline aqueous solutions of uranium. The results revealed that the effect of γ-irradiation of α-Al₂O₃ and the acidic media in which it is immersed, is associated with a stable matrix resistant to significant changes in the composition of the surface layer; whilst it seems that the effect of γ-irradiation of preheated α-Al₂O₃, is connected with changes of surface-OH groups strongly affected by heat treatment and irradiation dose.     

New examples of mixed-ligand bis(hexafluoroacetylacenonato)copper(II) complexes with 3-imidazoline nitroxide radicals at a Cu(C5HF6O2)2∶L=3∶2 ratio (L2=C14H19N2O,L3=C13H17N2O3)

The crystal structures of two (hexafluoroacetylacetonato)copper(II) complexes with 3-imidazoline nitroxide radicals, [Cu(C₅HF₆O₂)₂]₃ (C₁₄H₁₉N₂O)₂ (I) and [Cu(C₅HF₆O₂)₂]₃ (C₁₃H₁₇N₂O₃)₂ (II), have been determined. The compounds are triclinic (PI, Z=1) with a=8.730(2), b=10.357(2), c=21.996(5) Å, α=103.24(2), β=94.03(2), γ=95.04(2)⁰, V=1920(1) ų for I and a=8.679(2), b=14.769(4), c=15.368(4) Å, α=85.58(2), β=96.25(1), γ=104.60(1)⁰, V=1893(1) ų for II. Complexes I and II are molecular. The trinuclear molecules are centrosymmetric relative to the Cu(1) atom. The coordination polyhedron of Cu(1) is a square bipyramid formed by the O atoms of the hfac anions and nitroxide radicals (average Cu?O_hfac 1.92(1) for I and 1.93(1) Å for II; Cu?O_N?O 2.47(1) for I and 2.56(1) Å for II). The coordination polyhedron of Cu(2) is a trigonal bipyramid formed by the O atoms of the hfac anions (Cu?O_hfac 1.91(1)–2.12(1) for I and 1.91(1)–2.09(1) Å for II) and an imine N atom of the radical (Cu(2)?N(2) 2.00(1) for I and 2.03(1) Å for II). The molecules are linked by van der Waals forces.     

Effect of properties of aluminum oxide on selectivity of Pt/Al2O3 in dehydrogenation of n-alkanes

Conclusions The selectivity of Al-Pt catalysts (0.25% Pt) in the dehydrogenation of n-decane and n-hexane to n-alkenes depends on the properties of the aluminum oxide and increases in the order: Pt/-Al₂O₃2O₃s > Pt/-Al₂O₃.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 11, pp. 2615–2618, November, 1978.     

Preparation of Cr2O3-Al2O3 Solid Solutions by Reactive Magnetron Sputtering

 (Al,Cr)₂O₃ layers were deposited on cemented carbide insert tips at a substrate temperature of 500 °C by means of reactive magnetron sputtering. An Al target was sputtered in RF mode and a Cr target in DC mode simultaneously in an oxygen/argon plasma. The influence of the Al and Cr sputter power and of the oxygen partial pressure on composition and structure of the (Al,Cr)₂O₃ layers as well as on the binding states of their components were investigated. Special attention was paid to the interpretation of the O ls and O-KLL fine structure and peak shifts. For the binary phases γ-Al₂O₃ and Cr₂O₃, a good agreement with literature values was observed in each case. In case of the ternary phases a continuous shift of the energetic position of the O1s peak, the O-KL₂₃L₂₃ transition and the modified Auger parameter α ′ of oxygen between the two binary phases γ-Al₂O₃ and Cr₂O₃ could be detected, indicating a wide range of solid solubility between Al₂O₃ and Cr₂O₃. As revealed by grazing incidence X-ray diffraction, the crystallinity of the ternary phases is less pronounced as compared to the binaries and increases with increasing oxygen flow rate.     

Synthesis,Crystal Structure,and Magnetic Properties of {[Cu(phen)]2(C4H2O4)2} · 4.5H2O with C4H4O4 = Maleic Acid

Reaction of CuCl₂ · 2H₂O, phenanthroline, maleic acid and NaOH in CH₃OH/H₂O (1:1 v/v) at pH = 7.0 yielded blue {[Cu(phen)]₂(C₄H₂O₄)₂} · 4.5H₂O, which crystallizes in the monoclinic space group C2/c (no. 15) with cell dimensions: a = 18.127(2)Å, b = 12.482(2)Å, c = 14.602(2)Å, β = 103.43(1)°, U = 3213.5(8)ų, Z = 4. The crystal structure consists of the centrosymmetric dinuclear {[Cu(phen)]₂(C₄H₂O₄)₂} complex molecules and hydrogen bonded H₂O molecules. The Cu atoms are each square‐pyramidally coordinated by two N atoms of one phen ligand and three carboxyl O atoms of two maleato ligands with one carboxyl O atom at the apical position (d(Cu‐N) = 2.008, 2.012Å, equatorial d(Cu‐O) = 1.933, 1.969Å, axial d(Cu‐O) = 2.306Å). Two square‐pyramids are condensed via two apical carboxyl O atoms with a relatively larger Cu···Cu separation of 3.346(1)Å. The dinuclear complex molecules are assembled via the intermolecular π—π stacking interactions into 1D ribbons. Crossover of the resulting ribbons via interribbon π—π stacking interactions forms a 3D network with the tunnels occupied by H₂O molecules. The title complex behaves paramagnetically between 5—300 K, following the Curie‐Weiss law _χm(T—θ) = 0.435 cm³ · mol^—1 · K with θ = 1.59 K.     

The reaction of O(3P) with C2HCl3

The reaction of O(³P), prepared from the Hg photosensitization of N₂O, with C₂HCl₃ was studied at 25°C. The products of the reaction in the absence of O₂ were CO, CHCl₃, and polymer (as well as N₂ from the N₂O). The quantum yields of CO and CHCl₃ were 0.23 ± 0.01 and 0.14 ± 0.05, is respectively independent of reaction conditions. The reaction mechanism is with k_14a/k₁₄ = 0.23, where k_14a + k_14b. Most of the HCl and CCl₂ combine to form CHCl₃, but some other products must also be formed to account for the difference in the CO and CHCl₃ quantum yields. The C₂HCl₃O* adduct polymerizes without involving additional C₂HCl₃ molecules, since the quantum yield of C₂HCl₃ disappearance, ? Φ{C₂HCl₃}, was about 1.0 at high values of [N₂O]/[C₂HCl₃]. The rate coefficient for the reaction of O(³P) with C₂HCl₃ is 0.10 that for the reaction of O(³P) with C₂F₄. In the presence of O₂ the free radical chain oxidation occurs because of the reaction The main product is CHCl₂CCl(O) with smaller amounts of CO and CCl₂O, and some CO₂. The chain lengths were long and values of ? Φ {C₂HCl₃} up to 90 were observed.     

Effect of kcl on cucl2/γ-al2o3 catalyst for oxychlorination of ethane

Summary Effect of KCl on the structure and the catalytic properties of CuCl₂/γ-Al₂O₃ catalyst for ethane oxychlorination has been studied by means of solubility test, UV-vis spectroscopy, XRD, TPR, TEM and catalytic reaction. Addition of KCl decreases the interaction between active species CuCl₂ and γ-Al₂O₃ and increases the catalytic properties by accelerating the Cu(II) → Cu(I) reduction step.     

On the molecular models of lewis acid sites on the surface of γ-Al2O3 and in zeolites: a density functional study of CO adsorption

Adsorption complexes of CO-Lewis acid sites with 3- and 5-coordinated Al³⁺ are modeled by the density functional method using the cluster approach. Cluster models of the site with 4-coordinated Al³⁺ on the surface of γ-Al₂O₃ and in zeolites are suggested. For these models of adsorption complexes, C-O vibration frequencies are calculated and the energetics of CO adsorption is evaluated. Translated fromZhurnal Struktumoi Khimii, Vol. 38, No. 5, pp. 834–839, September–October, 1997.     

Thermal Characterization and Physico-Chemical Properties of Fe2O3−Mn2O3/Al2O3 Systems

The effect of ferric and manganese oxides dopants on thermal and physicochemical properties of Mn-oxide/Al₂O₃ and Fe₂O₃/Al₂O₃ systems has been studied separately. The pure and doped mixed solids were thermally treated at 400–1000°C. Pyrolysis of pure and doped mixed solids was investigated via thermal analysis (TG-DTG) techniques. The thermal products were characterized using XRD-analysis. The results revealed that pure ferric nitrate decomposes into Fe₂O₃ at 350°C and shows thermal stability up to1000°C. Crystalline Fe₃O₄ and Mn₃O₄phases were detected for some doped solids precalcined at 1000°C. Crystalline γ-Al₂O₃ phase was detected for all solids preheated up to 800°C. Ferric and manganese oxides enhanced the formation of α-Al₂O₃ phase at1000°C. Crystalline MnAl₂O₄ and MnFe₂O₄ phases were formed at 1000°C as a result of solid–solid interaction processes. The catalytic behavior of the thermal products was tested using the decomposition of H₂O₂ reaction. This revised version was published online in August 2006 with corrections to the Cover Date.