Preparation and properties of organo‐soluble polyimides based on 4,4′‐diamino‐3,3‐dimethyldiphenylmethane and conventional dianhydrides

4,4′‐Diamino‐3,3′‐dimethyldiphenylmethane was used to prepare polyimides in an attempt to achieve good organo‐solubility and light color. Polyimides based on this diamine and three conventional aromatic dianhydrides were prepared by solution polycondensation followed by chemical imidization. They possess good solubility in aprotonic polar organic solvents such as N‐methyl 2‐pyrrolidone, N,N‐dimethyl acetamide, and m‐cresol. Polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is even soluble in common solvents such as tetrahydrofuran and chloroform. Polyimides exhibit high transmittance at wavelengths above 400 nm. The glass transition temperature of polyimide from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and pyromellitic dianhydride is 370°C, while that from 4,4′‐diamino‐3,3′‐dimethyldiphenylmethane and diphenylether‐3,3′,4,4′‐tetracarboxylic acid dianhydride is about 260°C. The initial thermal decomposition temperatures of these polyimides are 520–540°C. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 72: 1299–1304, 1999     

Synthesis of 3,3′-Bis(2,2′,4,4′,6,6′-Hexanitortilbene)

This paper describes the synthesis of 3,3′bis(2,2′,4,4′,6,6′-hexanitrostilbene) (5). Based on the Ullmann reaction we prepared the title compound in nitrobenzene by using 3-chloro 2,2′,4,4′,6,6′-hexanitroztilbene (4) as the starting material and copper powder as the catalyst. (4) was reacted with hydrazine, not to yield a desired product, azo-3,3′bist(2,2′,4,4′,6,6′-hexanitrostilbene.) but to form a well-known explosive, 2,2′,4,4′,6,6′-hexanitrostibene (6). Differential scanning calorimetrical analysis has shown that (5) begins to decompose at the temperature of 298°C.     

Organosoluble polyimides derived from asymmetric 2‐substituted‐and 2,2′,6‐trisubstituted‐4,4′‐oxydianilines

We report a new method for the preparation of asymmetric diamines using 4,4′‐oxydianiline (4,4′‐ODA) as the starting material. By controlling the equivalents of bromination agent, N‐bromosuccinimide, we were able to attach bromide and phenyl substituents at the 2‐ or 2,2′,6‐positions of 4,4′‐ODA. Thus, four new asymmetric aromatic diamines, 2‐bromo‐4,4′‐oxydianiline (6), 2,2′,6‐tribromo‐4,4′‐oxydianiline (7), 2‐phenyl‐4,4′‐oxydianiline (8) and 2,2′,6‐triphenyl‐4,4′‐oxydianiline (9), were synthesized by this method. Their structural asymmetry was confirmed using ¹H NMR spectroscopy. Asymmetric polyimides (PI10–PI13) were prepared from these diamines and three different dianhydrides (pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride) in refluxing m‐cresol. The formed polyimides, except PI10a derived from 6 and PMDA, were all soluble in m‐cresol without premature precipitation during polymerization. These polyimides with inherent viscosity of 0.41–0.96 dL g^?1, measured at a concentration of 0.5 g dL^?1 in N‐methyl‐2‐pyrrolidone at 30 °C, can form tough and flexible films. Because of the structural asymmetry, they also exhibited enhanced solubility in organic solvents. Especially, polyimides PI11a and PI13a derived from 7 and 9 with rigid PMDA were soluble in various organic solvents at room temperature. The structural asymmetry of the prepared polyimides was also evidenced from ¹H NMR spectroscopy. In the ¹H NMR spectrum of PI11a, the protons of pyromellitic moiety appeared in an area ratio of 1:2:1 at three different chemical shifts, which were assigned to head‐to‐head, head‐to‐tail and tail‐to‐tail configurations, respectively. These polyimides also exhibited good thermal stability. Their glass transition temperatures ranged from 297 to 344 °C measured using thermal mechanical analysis. © 2013 Society of Chemical Industry     

Synthesis and properties of organosoluble polyimides derived from 2,2′‐dibromo‐ and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianilines

Two new aromatic diamines, 2,2′‐dibromo‐4,4′‐oxydianiline (DB‐ODA 4 ) and 2,2′,6,6′‐tetrabromo‐4,4′‐oxydianiline (TB‐ODA 5 ), have been synthesized by oxidation, bromination, and reduction of 4,4′‐oxydianiline (4,4′‐ODA). Novel polyimides 6a–f and 7a–f were prepared by reacting DB‐ODA ( 4 ) and TB‐ODA ( 5 ) with several dianhydrides by one‐step method, respectively. The inherent viscosities of these polyimides ranged from 0.31 to 0.99 dL/g (0.5 g/dL, in NMP at 30°C). These polyimides showed enhanced solubilities compared to those derived from 4,4′‐oxydianiline and corresponding dianhydrides. Especially, polyimides 7a , derived from rigid PMDA and TB‐ODA ( 5 ) can also be soluble in THF, DMF, DMAc, DMSO, and NMP. These polyimides also exhibited good thermal stability. Their glass transition temperatures measured by thermal mechanical analysis (TMA) ranged from 251 to 328°C. When the same dianhydrides were used, polyimides 7 containing four bromide substituents had higher glass transition temperatures than polyimides 6 containing two bromide substituents. The effects of incorporating more polarizable bromides on the refractive indices of polyimides were also investigated. The average refractive indices (n_av) measured at 633 nm were from 1.6088 to 1.7072, and the in‐plane/out‐of‐plane birefringences (Δn) were from 0.0098 to 0.0445. It was found that the refractive indices are slightly higher when polyimides contain more bromides. However, this effect is not very obvious. It might be due to loose chain packing resulted from bromide substituents at the 2,2′ and 2,2′,6,6′ positions of the oxydiphenylene moieties. © 2010 Wiley Periodicals, Inc. J Appl Polym Sci, 2010     

Preparation and characterization of 3,3′,4,4′-benzophenone tetracarboxylic dianhydride-pyromellitic diahydride alternating polyimides

Four kinds of 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA)-pyromelliitic dianhydride (PMDA) alternating polyimide (BTDA-PMDA API) were obtained by reacting 1 mol BTDA with 2 mol diamines to form BTDA chain-extended diamines (BTDA CED), followed by the addition of 1 mol PMDA to yield the BTDA-PMDA alternating polyamic acids (BTDA-PMDA APA), and finally by imidizing them thermally. BTDA CED were characterized by elemental analysis, infrared (IR), and ¹H-NMR spectroscopy. The structures of BTDA-PMDA APA and BTDA-PMDA API were investigated by IR and ¹H-NMR spectroscopy, and their thermal properties and interfacial tension were also studied. Furthermore, the characteristic properties of BTDA-PMDA API were compared with their corresponding homopolyimides from BTDA (BTDA HPI) and from PMDA (PMDA HPI). It was found that the alternating condensation polymerization is an effective method to modify polyimides interfacial tension with a small influence on the thermal stability. © 1997 John Wiley & Sons, Inc. J Appl Polym Sci 64: 1585–1593, 1997     

Resistive switching characteristics of polyimides derived from 2,2′‐aryl substituents tetracarboxylic dianhydrides

2,2′‐Position aryl‐substituted tetracarboxylic dianhydrides including 2,2′‐bis(biphenyl)‐4,4′,5,5′‐biphenyl tetracarboxylic dianhydride and 2,2′‐bis[4‐(naphthalen‐1‐yl)phenyl)]‐4,4′,5,5′‐biphenyl tetracarboxylic dianhydride were synthesized. A new series of aromatic polyimides (PIs) were synthesized via a two‐step procedure from 3,3′,4,4′‐biphenyl tetracarboxylic dianhydride and the newly synthesized tetracarboxylic dianhydrides monomers reacting with 2,2′‐bis[4′‐(3″,4″,5″‐trifluorophenyl)phenyl]‐4,4′‐biphenyl diamine. The resulting polymers exhibited excellent organosolubility and thermal properties associated with T_g at 264 °C and high initial thermal decomposition temperatures (T_5%) exceeding 500 °C in argon. Moreover, the fabricated sandwich structured memory devices of Al/PI‐a/ITO was determined to present a flash‐type memory behaviour, while Al/PI‐b/ITO and Al/PI‐c/ITO exhibited write‐once read‐many‐times memory capability with different threshold voltages. In addition, Al/polymer/ITO devices showed high stability under a constant stress or continuous read pulse voltage of ? 1.0 V. Copyright © 2011 Society of Chemical Industry     

Crystallography and Structure–Property Relationships in 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐Dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐ Quaterphenyl (DODECA)

X‐ray crystallographic study of 2,2′,2″,2′′′,4,4′,4″,4′′′,6,6′,6″,6′′′‐dodecanitro‐1,1′ : 3′1″ : 3″,1′′′‐quaterphenyl (DODECA) has been carried out. Nonbonding interatomic distances of oxygen atoms inside of all the nitro groups are shorter than those corresponding to the intermolecular contact radii for oxygen. By means of the DFT B3LYP/6‐31(d, p) method a difference of 136 kJ mol⁻¹ between the X‐ray and DFT structures of DODECA was found. The bearer of the highest initiation reactivity in its molecule in solid phase should be the nitro group at 4′′′‐position, in contrast to those at 2′‐ or 2″‐positions in its isolated molecule. The most reactive nitro group in the DODECA molecule can be well specified by the relationship between net charges on nitro groups and charges on their nitrogen atoms, both of them for the X‐ray structure. The ¹⁵N chemical shift, corresponding to this nitro group for the initiation by impact and shock, correlates very well with these shifts of the reaction centers of the other six “genuine” polynitro arenes.     

2,2′,6,6′-Tetrabromo-3,3′,5,5′-tetramethyl-4,4′-biphenol (TTB)–flame retardant copolycarbonates and copolyesters

2,2′,6,6′-Tetrabromo-3,3′,5,5′-tetramethyl-4,4′-biphenol (TTB) is a new flame retardant monomer possessing a high degree of chemical and thermal stability. This brominated biphenol can be directly incorporated as a comonomer in condensation polymerizations. An example is the preparation of copolycarbonates of TTB and 2,2-(4-hydroxyphenyl)propane (BPA) via the aqueous caustic phosgenation method. The reaction of TTB with either ethylene oxide or ethylene chlorohydrin affords 4,4′-bis(2-hydroxyethoxy)-2,2′,6,6′-tetrabromo-3,3′,5,5′-tetramethylbiphenyl (TTB-Diol). This diol is melt polymerized into a series of terephthalate copolymers with 1,4 butanediol. The above copolymers possess flame retardancy, thermal stability, and good mechanical properties. These high-bromine-content copolymers are blended with nonhalogen-containing polymers to afford blends with specific degrees of flame resistance.     

Synthesis and properties of new aromatic polyimides based on 2,2′‐dibromo‐4,4′,5,5′‐benzophenone tetracarboxylic dianhydride

New polyimides with enhanced thermal stability and high solubility were synthesized in common organic solvents from a new dianhydride, 2,2′‐dibromo‐4,4′,5,5′‐benzophenone tetracarboxylic dianhydride (DBBTDA). DBBTDA was used as monomer to synthesize polyimides by using various aromatic diamines. The polymers were characterized by IR and NMR spectroscopy and elemental analysis. These polyimides had good inherent viscosities in N‐methyl‐2‐pyrrolidinone (NMP) and also high solubility and excellent thermo‐oxidative stability, with 5 % weight loss in the range 433 to 597 °C. Copyright © 2004 Society of Chemical Industry     

Crystallography and Structure–Property Relationships of 2,2″,4,4′,4″,6,6′,6″‐Octanitro‐1,1′ : 3′,1″‐Terphenyl (ONT)

An X‐ray crystallographic study of 2,2″,4,4′,4″,6,6′,6″‐octanitro‐1,1′ : 3′,1″‐terphenyl (ONT) has been carried out. The dihedral angles between benzene rings vary from 84.9° to 89.4°. Nonbinding interatomic distances of oxygen atoms inside all the nitro groups are shorter than the intermolecular contact radii for oxygen. On the basis of the DFT B3LYP/6‐31(d, p) method it was found that the difference between the X‐ray structure in the solid phase and DFT result for the gas phase is 98 kJ mol⁻¹, and the bearer of the highest initiation reactivity of the ONT molecule in the solid phase should be the nitro group at 4″‐position, in contrast to those at 4′‐ or 6′‐position that play this role in the isolated molecule. It has been stated that the nitro groups at the reaction centers of the ONT molecule are relatively well specified by their ¹⁵N NMR chemical shifts.     

Synthesis of highly soluble and transparent polyimides

A novel aromatic diamine, 3,3′‐diisopropyl‐4,4′‐diaminophenyl‐4″‐methyltoluene with a 4‐methylphenyl pendant group and isopropyl side groups, was designed and synthesized in this study. Then it was polymerized with various aromatic dianhydrides including pyromellitic dianhydride, 3,3′,4,4′‐biphenyltetracarboxylic dianhydride, 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride and 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride via a one‐pot high temperature polycondensation procedure to produce a series of aromatic polyimides. These polyimides exhibited excellent solubility even in common organic solvents, such as chloroform and tetrahydrofuran. The flexible and tough films can be conveniently obtained by solution casting. The films were nearly colorless and exhibited high optical transparency, with the UV cutoff wavelength in the range 302–365 nm and the wavelength of 80% transparency in the range 385–461 nm. Moreover, they showed low dielectric constants (2.73–3.23 at 1 MHz) and low moisture absorption (0.13%–0.46%). Furthermore, they also possessed good thermal and thermo‐oxidative stability with 10% weight loss temperatures (T_10%) in the range 489–507 °C in a nitrogen atmosphere. The glass transition temperatures of all polyimides are in the range 262–308 °C. Copyright © 2012 Society of Chemical Industry     

Preparation and properties of novel processable polyimides derived from N,N‐bis(isocyanatoalkyl)‐1,2,4,5‐benzenetetracarboxylic‐1,2:4,5‐diimides

Two diisocyanate monomers containing methylene groups and built‐in imide structure have been prepared from the parent diacids via the Curtius–Weinstock rearrangement. Polyimides have been synthesized by solution polymerization of these isocyanates with pyromellitic dianhydride (PMDA), 3,3′,4,4′‐benzophenonetetracarboxylic dianhydride (BTDA), and hexafluoroisopropylidene‐2,2‐bis(phthalic‐anhydride) (6FDA). All monomers and polymers were characterized by conventional methods, and the physical properties of the polymers, including solution viscosity, solubility, thermal stability and thermal behaviour, were studied. © 2000 Society of Chemical Industry     

Soluble and light‐colored polyimides from 2,3,2′,3′‐oxydiphthalic anhydride and aromatic diamines

A series of polyimides were prepared from 2,3,2′,3′‐oxydiphthalic anhydride (3,3′‐ODPA) with various aromatic diamines via three different synthetic procedures. The one‐step and two‐step methods with the thermal imidization of poly(amic acids) (PAAs) yielded polyimides with a relatively low inherent viscosity; these produced brittle films. The polyimides prepared by the two‐step method via the chemical imidization of PAA precursors exhibited a higher inherent viscosity and afforded tough and creaseable films. All the 3,3′‐ODPA based polyimides had a significantly higher solubility than the corresponding polyimides from 3,4,3′,4′‐oxydiphthalic anhydride. The films cast from 3,3′‐ODPA polyimides also showed high optical transparencies and less color, with an ultraviolet–visible absorption edge of 370–397 nm and low yellowness index values of 11.3–29.8. These polyimides exhibited glass‐transition temperatures in the range 211–289°C and showed no significant decomposition below 500°C under nitrogen or air atmospheres. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1352–1360, 2005     

Reaction kinetics and thermal properties of epoxidised cresol novolac/4,4′‐diglycidyl (3,3′,5,5′‐tetramethylbiphenyl) epoxy resin composite cured with aromatic diamine

A series of novel composites based on different ratios of epoxidised cresol novolac (ECN) and 4,4′‐diglycidyl(3,3′,5,5′‐tetramethylbiphenyl) epoxy resin (TMBP) have been prepared with the curing agent 4,4′‐methylenediamine (DDM) and 4,4′‐diaminodiphenylsulfone (DDS), respectively. The investigation of cure kinetics was performed by differential scanning calorimetry using an isoconversional method. The high thermal stabilities of the cured samples were also studied by thermogravimetric analysis. In addition, no phase separation was observed for cured ECN/DDM and ECN/DDS blending with different amounts of TMBP by dynamic mechanical analysis and scanning electron microscopy. Moreover, the cured systems also exhibited excellent impact properties and low moisture absorption. All the results indicate that the ECN/TMBP/DDM and ECN/TMBP/DDS systems are promising materials in electronic packaging. Copyright © 2011 Society of Chemical Industry     

Synthesis and properties of polyimides derived from diamine monomer containing bi-benzimidazole unit

A new aromatic heterocyclic diamine monomer containing bi-benzimidazole unit, 2,2-bis(4′-aminophenyl)-5,5-bi-1H-benzimidazole, was synthesized from 2,2-bis(4′-nitrophenyl)-5,5-bi-1H-benzimidazole (BNPBBI) prepared via the reaction of 3,3′,4,4′-biphenyltetramine and p-nitrobenzaldehyde with a high yield. Their compositions and chemical structures containing polybenzimidazole backbone were characterized by FTIR, ¹H NMR and elemental analysis. A series of aromatic polyimides containing the heterocyclic moiety in the main chain were prepared by the reaction of BAPBBI with various aromatic dianhydrides of 3,3′,4,4′-biphenyltetracarboxylic dianhydride, 4,4′-oxydiphthalic anhydride or pyromellitic dianhydride. The polymers possess a high glass transition temperature of >415 °C and a good thermal stability up to 566 °C with a 5 % weight loss. The combination of polybenzimidazole and polyimide via introducing BAPBBI into the main chains provides the rigid structure, and macromolecular interactions are thus enhanced, resulting in the outstanding mechanical properties. These polyimides exhibit the strong tensile strength of 201 to 327 MPa, and the ultrahigh tensile moduli of 10.7 to 15.5 GPa without post stretching.     

Polyimidazopyrrolones and related polymers. II. Polyimidazopyrrolones from aromatic dianhydrides and 3,3′-dichloro-5,5′-diaminobenzidine

The preparation of 3,3′-dichloro-5,5′-diaminobenzidine and its polymeric reaction products with pyromellitic dianhydride and 3,4,3′,4′-benzophenonetetracarboxylic dianhydride are described. The soluble amine–acid–amide form of the polymer is stable at higher concentrations than the corresponding polymers from 3,3′-diaminobenzidine or 3,3′,4,4′-tetraaminodiphenyl ether. Infrared spectra indicate that polybenzimidazopyrrolone structure is formed after cure. The preparation and properties of films and glass-reinforced laminates prepared from the polymers are described.     

Synthesis,characterization, and gas permeability of aromatic polyimides containing pendant phenoxy group

A diamine containing a pendant phenoxy group, 1-phenoxy-2,4-diaminobenzene, was synthesized and condensed with different aromatic dianhydrides [4,4′-oxydiphthalic dianhydride, 4,4′-(hexafluoroisopropylidene)diphthalic anhydride, 3,3′,4,4′-benzophenone tetracarboxylic dianhydride, 3,3′,4,4′-biphenyltetracorboxylic dianhydride, and pyromellitic dianhydride] by one-step synthesis at a high temperature in m-cresol to obtain polyimides in high yields. Most of the polyimides exhibited good solvent solubility and could be readily dissolved in chloroform, sym-tetrachloroethane, N,N-dimethylformamide, N,N-dimethylacetamide, and nitrobenzene. Their inherent viscosities were in the range of 0.33–1.16 dL/g. Wide-angle X-ray spectra revealed that these polymers were amorphous in nature. All these polyimides were thermally stable, having initial decomposition temperatures above 500°C and glass-transition temperatures in the range of 248–281°C. The gas permeability of 4,4′-oxydiphthalic dianhydride and 4,4′-(hexafluoroisopropylidene)diphthalic anhydride based polyimides was investigated with pure gases: He, H₂, O₂, Ar, N₂, CH₄, and CO₂. A polyimide containing a  C(CF₃)₂ linkage showed a good combination of permeability and selectivity. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci 2008     

Synthesis and characterization of polyamide-imides

A series of thermally stable, tough, linear polyimides containing amide linkages was prepared. The new polyamide-imides were synthesized by reacting a group of isomers of diaminobenzanilide (DABA) with various dianhydrides, such as 4,4′-oxydiphthalic anhydride (ODPA), 3,3′,4,4′-biphenyltetracarboxylic dianhydride (BPDA), and 2,2-bis(3,4-dicarboxyphenyl) hexafluoropropane dianhydride (6FDA). The resulting polyamide-acids were thermally or chemically converted to the polyamide-imide (PAI). Twelve polyimides were synthesized from unsubstituted and N-methyl substituted amide diamines and their properties were compared with previously made polyamide-imides and the polyimide LARC-TPI. These polyimides exhibited high inherent viscosities and glass transition temperatures. They were made into tough, flexible films of which some showed good thermal stability and resistance to organic solvents. Overall, the mechanical properties of the PAI films were comparable to those of LARC-TPI with the 4,4′-systems exhibiting exceptional properties and crystallinity. These materials have potential as high temperature films, coatings and fibers, as well as molding and laminating resins.     

Gas permeability and permselectivity of polyimides prepared from phenylenediamines with methyl substitution at the ortho position

Polyimides were prepared from diamines: 2,4,6-trimethyl-1,3-phenylenediamine (3MPDA) and 2,3,4,5-tetramethyl-1,4-phenylenediamine (4MPDA). 1,4-Bis(3,4-dicarboxyphenoxy)benzene dianhydride (HQDPA), 3,3′,4,4′-benzophenone tetracarboxylic dianhydride (BTDA), 3,3′-4,4′-diphenylsulphone tetracarboxylic dianhydride (SO₂PDA), 3,3′,4,4′-diphenylsulphide tetracarboxylic dianhydride (SPDA), pyromellitic dianhydride (PMDA), and 2,2′-bis(3,4-dicarboxyphenyl)hexafluoroisopropane dianhydride (6FDA) were used as dianhydride. The gas permeabilities of H₂, O₂ and N₂ through the polyimides were measured at temperatures from 30 °C to 90 °C. The results show that as methyl and trifluoromethyl substitution groups densities increase from 7.73 × 10⁻³ mol cm⁻³ to 13.50 × 10⁻³ mol cm⁻³, the peameability of H₂ increases 10-fold at 60% loss of permselectivity of H₂/N₂; however, the permeability of O₂ increases 20-fold at 20% loss of permselectivity of O₂/N₂. For O₂/N₂ separation, PMDA-3MPDA has similar performance to 6FDA-3MPDA and 6FDA-4MPDA; all have higher permeabilities for O₂ than normal polyimides, and the P(O₂)/α(O₂/N₂) trade-off relationships lie on the upper bound line for polymers. © 1999 Society of Chemical Industry     

Chemical modification of 3,3′,4,4′‐biphenyltetracarboxylic dianhydride polyimides by a catechol‐derived bis(ether amine)

Having previously demonstrated that the polyimide derived from 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA) and 1,2‐bis(4‐aminophenoxy)benzene [termed triphenyl ether catechol diamine (TPEC)] exhibited superior tensile properties in addition to good thermal properties, we now provide a preliminary assessment of the properties of the copolyimides prepared from BPDA, TPEC, and another aromatic diamine. The homopolyimides derived from BPDA and many aromatic diamines generally possessed good mechanical properties and thermal properties; however, they were insoluble in available organic solvents. In several cases, organosoluble BPDA copolyimides could be prepared from BPDA and equimolar mixtures of TPEC and another aromatic diamine. All the copolyimides could be formed into tough films with high moduli and strengths and, in most cases, high extensions to break. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 351–358, 2002; DOI 10.1002/app.10342