Hydrogen,ethanol and cellulase production from pulp and paper primary sludge by fermentation with Clostridium thermocellum

Pulp and paper industry primary sludge being largely composed of lignocellulosic fibres, it could be used as carbon source by bacteria having cellulolytic capability. The aim of this study was to evaluate the use of cellulose contained in this type of sludge for Clostridium thermocellum to produce ethanol, hydrogen and cellulases. In an ATCC 1191 medium containing 5 kg m⁻³ dry primary sludge from recycled paper mill, batch culture reached stationary phase after 2 days. All of the available cellulose was hydrolysed after 60 h of incubation, with a final pH of 5.83. Metabolites produced after 60 h of fermentation were acetate (8.50 mol m⁻³), ethanol (11.30 mol m⁻³), lactate (8.75 mol m⁻³), formate (0.27 mol m⁻³), hydrogen (11.20 mol m⁻³) and carbon dioxide (18.41 mol m⁻³). Cellulase activity was detected in the supernatant after 36 h, with a maximal activity of 0.25 U cm⁻³ at 72 h. Pulp and paper primary sludge appeared to be a readily usable substrate for C. thermocellum at this concentration, yielding both potential biofuels (hydrogen and ethanol) as well as active cellulases.     

Energy recovery from grass of urban roadside verges by anaerobic digestion and combustion after pre-processing

Grass from urban roadside verges is a potential, though widely unused, resource for bioenergy recovery. Two possible bioenergy recovery techniques were tested, i.e. i) direct anaerobic digestion of the whole parent material and ii) the “integrated generation of solid fuel and biogas from biomass” (IFBB) procedure, which divides biomass into a press fluid and a press cake by mashing and mechanical dewatering. Biomass yield, chemical composition and canopy height of biomass, contribution of functional groups, fermentation characteristics of silage and press fluids, as well as characteristics of the produced solid fuel was investigated, applying a 4-cut management for anaerobic digestion, a 2-cut management for IFBB and an 8 times mulching as a reference. Mean annual biomass yield (2013 and 2014) was 3.24, 3.33 and 5.68 t dry matter ha⁻¹ for the mulching, 4-cut management and 2-cut management, respectively. Yields were higher in 2014 due to more favourable weather conditions. Fibre concentration was higher in material of the 2-cut management than in the 4-cut management, however, methane yield of the corresponding silages was the same. Highest methane yield was gained from press fluids with 292 l_N kg⁻¹ volatile solids. The press cake had a lower heating value of 16 MJ kg⁻¹ dry matter and a K₂O/CaO index of 0.51–0.88. Gross energy output was 26.4 GJ ha⁻¹ for anaerobic digestion and 84.4 GJ ha⁻¹ for IFBB. Thus, an altered roadside verge management with reduced cutting frequency might allow a significant energy recovery and improved ecosystem services, i.e. increased biodiversity.     

Upgraded biofuel from residue biomass by Thermo-Catalytic Reforming and hydrodeoxygenation

Research is focused on the utilisation of waste or residue biomass for bioenergy conversion. A promising conversion technology for the production of liquid biofuels from residue biomass is a process called Thermo-Catalytic Reforming (TCR^®​) which is a combination of prior thermal treatment of the biomass at mild temperatures (intermediate pyrolysis) followed by a second catalytic treatment step at elevated temperatures (reforming). This article focuses on the conversion of TCR^® liquids from digestate as a feedstock for subsequent hydrocarbon production. The generated bio-oil showed a lower heating value of 34.0 MJ kg⁻¹ with an oxygen content of 7.0% and a water content of 2.2%. The bio-oil was hydrodeoxygenated using an industrial NiMo–Al₂O₃ catalyst at temperatures of 503 K–643 K and a pressure of 14 MPa. The hydrodeoxygenated bio-oil reached a lower heating value of 42.3 MJ kg⁻¹ with an oxygen content below 0.8 mg kg⁻¹ and water content of 30 ppm. Product yields and catalyst life give confidence that upgrading of the TCR^®​ bio-oil offers a suitable option to meet the high standards of common fuels.     

Changes in feedstock quality in willow chip piles created in winter from a commercial scale harvest

Storage and handling are important facets of biomass logistics because there are associated costs and biomass properties can change significantly as material proceeds through the supply chain. Thus, this aspect of biomass supply systems requires continued study. Shrub willow chips were harvested, and used to create six piles that each contained between 10 and 22 Mg (fresh biomass). Material was monitored for several months in temporary storage to assess changes in biomass quality (moisture, ash and energy content). Internal pile temperatures increased due to biological activity and conditions within a pile quickly differentiated based on location (shell, core, top, and side). Mean moisture content increased from 42 to 47% (mass fraction) between harvest and delivery of the chips, but ranged between 37 and over 60% over the next three months depending on pile location with the shell generally drier than the core. Mean ash content increased 1 to 2% points (mass fraction) between harvesting, reloading and delivery to the trial location, but became more variable during storage. Higher heating values (HHV) were stable between 18.6 and 19.0 MJ kg⁻¹ over the six months, but lower heating values (LHV) ranged between 8.6 and 11.7 MJ kg⁻¹ and mirrored changes in moisture content. There was minimal change in chip quality over two months, but quality became more variable over longer time periods. This period could be extended, and negative effects on chip quality could be mitigated, by improving storage methods, blending different types of chips, or employing pretreatments.     

Optimization of mechanical pre-treatment of Laminariaceae spp. biomass-derived biogas

Macroalgae have not met their full potential to date as biomass for the production of energy. One reason is the high cost associated with the pretreatment which breaks the biomass's crystalline structure and better exposes the fermentable sugars to anaerobes. In the attempt to overcome this technological barrier, the performance of a Hollander beater mechanical pretreatment is assessed in this paper. This pretreatment has been applied to a batch of Laminariaceae biomass and inoculated with sludge from a wastewater treatment plant. The derived biogas and methane yields were used as the responses of a complex system in order to identify the optimal system input variables by using the response surface methodology (RSM). The system's inputs considered are the mechanical pretreatment time (5–15 min range), the machine's chopping gap (76–836 μm) and the mesophilic to thermophilic range of temperatures (30–50 °C). The mechanical pretreatment was carried out with the purpose of enhancing the biodegradability of the macroalgal feedstock by increasing the specific surface area available during the anaerobic co-digestion. The pretreatment effects on the two considered responses are estimated, discussed and optimized using the tools provided by the statistical software Design-Expert v.8. The best biogas yield of treated macroalgae was found at 50 °C after 10 min of treatment, providing 52% extra biogas and 53% extra methane yield when compared to untreated samples at the same temperature conditions. The highest biogas rate achieved by treating the biomass was 685 cc gTS⁻¹, which is 430 cc gTS⁻¹ in terms of CH₄ yield.     

Sickle bush (Dichrostachys cinerea L.) field performance and physical–chemical property assessment for energy purposes

The sickle bush (Dichrostachys cinerea (L.) Wight & Arn.) comprises a woody legume shrub which is widely distributed throughout of the tropical areas of Africa, Asia and Oceania, being found as well in Cuba where it represents a difficult to control invasive plant. It holds great silvopasture and energy crop potentials. In southwestern Spain a two year field trial was conducted contemplating also another six hardwood taxa commonly used as energy crops. The sickle bush above ground dry biomass fraction was 60.4%; sickle bush displayed a high transpiration rate during hot days (3.02 kg m⁻² d⁻¹ to 6.82 kg m⁻² d⁻¹); cold winter temperatures (<−2 °C) together with hot and dry summer air (<20% relative humidity) committed survival and growth. The physical-chemical wood properties and the pellets thereof derived were analyzed and compared to those of the other energy crop taxa. The within other woody species normal chemical composition range coupled to a high wood density and energetic use properties (19.2 MJ kg⁻¹ higher heating value, 29 g kg⁻¹ ash content) all allow for an industrial use. Pellets evidenced also good physical and mechanical properties (690 kg m⁻³ bulk density, 42 g kg⁻¹ moisture content). However, the mechanical durability (93.9%) was slightly less than that required by the non-industrial use standards, therefore further improvements should be studied. All of the above could encourage scrubland cuts in Cuba as a mechanical control method, in addition to the expansion of plantations within of their tropical climate based natural habitats.     

Enhanced substrate degradation and methane yield with maleic acid pre-treatments in biomass crops and residues

Organic acids are envisaged as alternative catalysts to strong mineral acids, in pre-treatment of ligno-cellulosic biomass for anaerobic digestion (AD). To evaluate this hypothesis, an untreated control and four pre-treatments (25 °C for 24 h) involving two levels of maleic acid (34.8 and 69.6 kg m⁻³), alone and combined with sulphuric acid (4 kg m⁻³), were studied in three agricultural substrates: Arundo (aka giant reed), Barley straw and B133 fibre sorghum. Methane production was assessed in a batch AD assay (35 °C for 51 days) with 4 g L⁻¹ of volatile solid (VS) load. Fibre composition and structure were investigated through chemical analysis and Fourier transform infrared (FTIR) spectrometry. Arundo and B133 that were the most and least recalcitrant substrate, respectively, staged the highest and lowest increase in methane with high maleic acid: +62% over 218 cm³ g⁻¹ of VS in untreated Arundo; +36% over 284 cm³ g⁻¹ of VS in untreated B133. Barley straw showed an intermediate behaviour (+41% over 269 cm³ g⁻¹ of VS). H₂SO₄ addition to maleic acid did not improve CH₄ output. The large increase in methane yield determined by pre-treatments was reflected in the concurrent decrease of fibre (between 14 and 39% depending on fibrous component). Based on FTIR spectra, bands assigned to hemicellulose and cellulose displayed lower absorbance after pre-treatment, supporting the hypothesis of solubilisation of structural carbohydrates and change in fibre structure. Hence, maleic acid was shown a suitable catalyst to improve biodegradability of ligno-cellulosic biomass, especially in recalcitrant substrates as Arundo.     

Cob biomass supply for combined heat and power and biofuel in the north central USA

Corn (Zea mays L.) cobs are being evaluated as a potential bioenergy feedstock for combined heat and power generation (CHP) and conversion into a biofuel. The objective of this study was to determine corn cob availability in north central United States (Minnesota, North Dakota, and South Dakota) using existing corn grain ethanol plants as a proxy for possible future co-located cellulosic ethanol plants. Cob production estimates averaged 6.04 Tg and 8.87 Tg using a 40 km radius area and 80 km radius area, respectively, from existing corn grain ethanol plants. The use of CHP from cobs reduces overall GHG emissions by 60%–65% from existing dry mill ethanol plants. An integrated biorefinery further reduces corn grain ethanol GHG emissions with estimated ranges from 13.9 g CO₂ equiv MJ⁻¹ to 17.4 g CO₂ equiv MJ⁻¹. Significant radius area overlap (53% overlap for 40 km radius and 86% overlap for 80 km radius) exists for cob availability between current corn grain ethanol plants in this region suggesting possible cob supply constraints for a mature biofuel industry. A multi-feedstock approach will likely be required to meet multiple end user renewable energy requirements for the north central United States. Economic and feedstock logistics models need to account for possible supply constraints under a mature biofuel industry.     

Net N2O and CH4 soil fluxes of annual and perennial bioenergy crops in two central German regions

The area used for bioenergy feedstock production is increasing because substitution of fossil fuels by bioenergy is promoted as an option to reduce greenhouse gas (GHG) emissions. However, agriculture itself contributes to rising atmospheric nitrous oxide (N₂O) and methane (CH₄) concentrations. In this study we tested whether the net exchanges of N₂O and CH₄ between soil and atmosphere differ between annual fertilized and perennial unfertilized bioenergy crops. We measured N₂O and CH₄ soil fluxes from poplar short rotation coppice (SRC), perennial grass-clover and annual bioenergy crops (silage maize, oilseed rape, winter wheat) in two central German regions for two years. In the second year after establishment, the N₂O emissions were significantly lower in SRC (<0.1 kg N₂O–N ha⁻¹ yr⁻¹) than grassland (0.8 kg N₂O–N ha⁻¹ yr⁻¹) and the annual crop (winter wheat; 1.5 kg N₂O–N ha⁻¹ yr⁻¹) at one regional site (Reiffenhausen). However, a different trend was observed in the first year when contents of mineral nitrogen were still higher in SRC due to former cropland use. At the other regional site (Gierstädt), N₂O emissions were generally low (<0.5 kg N₂O–N ha⁻¹ yr⁻¹) and no crop-type effects were detected. Net uptake of atmospheric CH₄ varied between 0.4 and 1.2 kg CH₄–C ha⁻¹ yr⁻¹ with no consistent crop-type effect. The N₂O emissions related to gross energy in the harvested biomass ranged from 0.07 to 6.22 kg CO₂ equ GJ⁻¹. In both regions, Gierstädt (low N₂O emissions) and more distinct Reiffenhausen (medium N₂O emissions), this energy yield-related N₂O emission was the lowest for SRC.     

Can slurry biogas systems be cost effective without subsidy in Mexico?

Biogas from pig slurry in Mexico has potential to produce 21 PJ per year, equivalent to 3.5% of natural gas consumption in 2013. In this paper, three different scenarios are analysed: mono-digestion of pig slurry in a finisher farm (scenario 1); co-digestion of pig slurry and elephant grass in a finisher farm in situ (scenario 2) and co-digestion of pig slurry and elephant grass in centralised biogas plants (scenario 3). The digesters proposed are anaerobic high density polyurethane (HDPE) covered lagoons. HDPE centralised plants can have capital costs 5 times cheaper than European biogas plants. The economics of utilisation of biogas for electricity generation and as biomethane (a natural gas substitute) were investigated. Economic evaluations for on-site slurry digestion (Scenario 1) and on-site co-digestion of elephant grass and pig slurry (Scenario 2) showed potential for profitability with tariffs less than $US 0.12/kWh_e. For centralised systems (Scenario 3) tariffs of $US 0.161/kWh_e to $US 0.195/kWh_e are required. Slurry transportation, energy use and harvest and ensiling account for 65% of the operational costs in centralised plants (Scenario 3). Biomethane production could compete with natural gas if a subsidy of 4.5 c/L diesel (1 m³ of biomethane) equivalent was available.     

Production of ethanol from raw juice and thick juice of sugar beet by continuous ethanol fermentation with flocculating yeast strain KF-7

Sugar beet juice can serve as feedstock for ethanol product due to its high content of fermentable sugars and high energy output/input ratio. Batch ethanol fermentation of raw juice and thick juice proved that addition of mineral nutrients could not improve ethanol concentration, but could accelerate the fermentation rate. Fermentation of thick juice with an initial pH of 9.1 did not affect the fermentation process. The continuous ethanol fermentation of raw juice was performed at 35 °C with a dilution rate of 0.3 h⁻¹, resulting in ethanol concentration, ethanol yield and productivity of 70.7 g L⁻¹, 89.8% and 21.2 g L⁻¹ h⁻¹, respectively. A two-stage reactor was used in the continuous ethanol fermentation of thick juice by feeding fresh yeast cells into the second reactor. This process was stable at a total process dilution rate of 0.11 h⁻¹ with an overall sugar concentration of 190 g L⁻¹ in the influent. The ethanol concentration was kept at approximately 80 g L⁻¹, corresponding to ethanol yield of 82.5% and productivity of 8.8 g L⁻¹ h⁻¹.     

Mild alkaline pre-treatments loosen fibre structure enhancing methane production from biomass crops and residues

Three ligno-cellulosic substrates representing varying levels of biodegradability (giant reed, GR; fibre sorghum, FS; barley straw, BS) were combined with mild alkaline pre-treatments (NaOH 0.05, 0.10 and 0.15 N at 25 °C for 24 h) plus untreated controls, to study pre-treatment effects on physical-chemical structure, anaerobic digestibility and methane output of the three substrates. In a batch anaerobic digestion (AD) assay (58 days; 35 °C; 4 g VS l⁻¹), the most recalcitrant substrate (GR) staged the highest increase in cumulative methane yield: +30% with NaOH 0.15 N over 190 ml CH₄ g⁻¹ VS in untreated GR. Conversely, the least recalcitrant substrate (FS) exhibited the lowest gain (+10% over 248 ml CH₄ g⁻¹ VS), while an intermediate behaviour was shown by BS (+15% over 232 ml CH₄ g⁻¹ VS). Pre-treatments speeded AD kinetics and reduced technical digestion time (i.e., the time needed to achieve 80% methane potential), which are the premises for increased production capacity of full scale AD plants. Fibre components (cellulose, hemicellulose and acid insoluble lignin determined after acid hydrolysis) and substrate structure (Fourier transform infra-red spectroscopy and scanning electron microscopy) outlined reductions of the three fibre components after pre-treatments, supporting claims of loosened binding of lignin with cellulose and hemicellulose. Hence, mild alkaline pre-treatments were shown to improve the biodegradability of ligno-cellulosic substrates to an extent proportional to their recalcitrance. In turn, this contributes to mitigate the food vs. fuel controversy raised by the use of whole plant cereals (namely, maize) as feedstocks for biogas production.     

Effects of delayed winter harvest on biomass yield and quality of napiergrass and energycane

Napiergrass (Cenchrus purpureus (Schumach.) Morrone) and energycane (Saccharum hyb.) are perennial grasses that are well-suited for biomass production in the southeastern USA. The purpose of this study was to determine the effects of delayed winter harvest on biomass yield and quality of these grasses. The study was conducted on two adjacent sites near Midville, GA. Each site used a split-plot design with four replications, with species as the main plot, and harvest times (December, January, or February) as sub-plots. Dry matter (DM) yields were measured by mechanical harvesting, and a sample of biomass was taken from each harvest for determination of ethanol production by simultaneous saccharification and fermentation (SSF). Biomass moisture, N, P, K, and ash mass fractions were also measured. Energycane DM yields were stable from December (46.8 Mg ha⁻¹) to January (42.9 Mg ha⁻¹), but then declined (36.8 Mg ha⁻¹), while napiergrass yields declined sharply from December (47.0 Mg ha⁻¹) to January (35.0 Mg ha⁻¹). Napiergrass moisture mass fraction was reduced by an average of 18% in February harvests compared to December. Mass fractions of N, K, and ash tended to decrease with later harvesting, but sometimes increased due to changes in biomass composition. Delaying harvest of napiergrass from December to January reduced N removal by an average of 144 kg ha⁻¹, while delaying harvest of energycane to February reduced N removal by an average of 54 kg ha⁻¹. In SSF, later-harvested energycane produced less ethanol per unit of DM while napiergrass was less affected by harvest date.     

Compositional differences among upland and lowland switchgrass ecotypes grown as a bioenergy feedstock crop

Feedstock quality mainly depends upon the biomass composition and bioenergy conversion system being used. Higher cellulose and hemicellulose concentrations are desirable for biochemical conversion, whereas higher lignin is favored for thermochemical conversion. The efficiency of these conversion systems is influenced by the presence of high nitrogen and ash concentrations. Switchgrass (Panicum virgatum L.) varieties are classified into two ecotypes based on their habitat preferences, i.e., upland and lowland. The objectives of this study were to quantify the chemical composition of switchgrass varieties as influenced by harvest management, and to determine if ecotypic differences exist among them. A field study was conducted near Ames, IA during 2012 and 2013. Upland (‘Cave-in-Rock’, ‘Trailblazer’ and ‘Blackwell’) and lowland switchgrass varieties (‘Kanlow’ and ‘Alamo’) were grown in a randomized block design with six replications. Six biomass harvests were collected at approximately 2-week intervals each year. In both years, delaying harvest increased cellulose, hemicellulose and lignin concentrations while decreasing nitrogen and ash concentrations in all varieties. On average, Kanlow had the highest cellulose and hemicellulose concentration (354 and 321 g kg⁻¹ DM respectively), and Cave-in-Rock had the highest lignin concentration (33 g kg⁻¹ DM). The lowest nitrogen and ash concentrations were observed in Kanlow (14 and 95 g kg⁻¹ DM respectively). In general, our results indicate that delaying harvest until fall improves feedstock quality, and ecotypic differences do exist between varieties for important feedstock quality traits. These findings also demonstrate potential for developing improved switchgrass cultivars as bioenergy feedstock by intermating lowland and upland ecotypes.     

Assessing sustainable forest biomass potential and bioenergy implications for the northern Lake States region,USA

Forestlands in the United States have tremendous potential for providing feedstocks necessary to meet emerging renewable energy standards. The Lake States region is one area recognized for its high potential of supplying forest-derived biomass; however, the long-term availability of roundwood harvests and associated residues from this region has not been fully explored. Better distribution and temporal availability estimates are needed to formulate emerging state policies regarding renewable energy development. We used a novel predictive methodology to quantify sustainable biomass availability and likely harvest levels over a 100-year period in the Lake States region. USDA Forest Inventory and Analysis estimates of timberland were combined with published growth and yield models, and historic harvest data using the Forest Age Class Change Simulator (FACCS) to generate availability estimates. Monte-Carlo simulation was used to develop probability distributions of biomass harvests and to incorporate the uncertainty of future harvest levels. Our results indicate that 11.27–15.71 Mt y⁻¹ dry roundwood could be sustainably harvested from the Lake States. Assuming 65% collection rate, 1.87–2.62 Mt y⁻¹ residue could be removed, which if substituted for coal would generate 2.12–2.99 GW h of electricity on equivalent energy basis while reducing GHG (CO₂e) emission by 1.91–2.69 Mt annually. In addition to promoting energy security and reducing GHG emissions, forest residues for energy may create additional revenues and employment opportunities in a region historically dependent on forest-based industries.     

Lignocellulosic ethanol production employing immobilized Saccharomyces cerevisiae in packed bed reactor

Most of ethanol production processes are limited by lower ethanol production rate and recyclability problem of ethanologenic organism. In the present study, immobilized co-fermenting Saccharomyces cerevisiae GSE1618 was employed for ethanol fermentation using rice straw enzymatic hydrolysate in a packed bed reactor (PBR). The immobilization of S. cerevisiae was performed by entrapment in Ca-alginate for optimization of ethanol production by varying alginic acid concentration, bead size, glucose concentration, temperature and hardening time. Remarkably, extra hardened beads (EHB) immobilized with S. cerevisiae could be used up to repeated 40 fermentation batches. In continuous PBR, maximum 81.82 g L⁻¹ ethanol was obtained with 29.95 g L⁻¹ h⁻¹ productivity with initial glucose concentration of 180 g L⁻¹ in feed at dilution rate of 0.37 h⁻¹. However, maximum ethanol concentration of 40.33 g L⁻¹ (99% yield) with 24.61 g L⁻¹ h⁻¹ productivity was attained at 0.61 h⁻¹ dilution rate in fermentation of un-detoxified rice straw enzymatic hydrolysate (REH). At commercial scale, EHB has great potential for continuous ethanol production with high productivity using lignocellulosic hydrolysate in PBR.     

Sweet sorghum as a whole-crop feedstock for ethanol production

The potential of sweet sorghum as an alternative crop for ethanol production was investigated in this study. Initially, the enzymatic hydrolysis of sorghum grains was optimized, and the hydrolysate produced under optimal conditions was used for ethanol production with an industrial strain of Saccharomyces cerevisiae, resulting in an ethanol concentration of 87 g L⁻¹. From the sugary fraction (sweet sorghum juice), 72 g L⁻¹ ethanol was produced. The sweet sorghum bagasse was submitted to acid pretreatment for hemicellulose removal and hydrolysis, and a flocculant strain of Scheffersomyces stipitis was used to evaluate the fermentability of the hemicellulosic hydrolysate. This process yielded an ethanol concentration of 30 g L⁻¹ at 23 h of fermentation. After acid pretreatment, the remaining solid underwent an alkaline extraction for lignin removal. This partially delignified material, known as partially delignified lignin (PDC), was enriched with nutrients in a solid/liquid ratio of 1 g/3.33 mL and subjected to simultaneous saccharification and fermentation (SSF) process, resulting in an ethanol concentration of 85 g L⁻¹ at 21 h of fermentation. Thus, from the conversion of starchy, sugary and lignocellulosic fractions approximately 160 L ethanol.ton⁻¹ sweet sorghum was obtained. This amount corresponds to 13,600 L ethanol.ha⁻¹.     

Steam explosion pretreatment and enzymatic saccharification of duckweed (Lemna minor) biomass

Our previous research has shown that duckweed is potentially an ideal feedstock for the production of biofuels because it can be effectively saccharified enzymatically. Here we report the results of experiments in which duckweed was pre-treated by steam explosion prior to enzyme digestion. A range of temperatures, from 130 to 230 °C with a fixed retention time of 10 min, were employed. The best pretreatment conditions were 210 °C for 10 min; these conditions produced the highest amount of water-soluble material (70%), the greatest levels of starch solubilisation (21%) and hemicellulose and pectic polysaccharides degradation (60%). The use of these steam explosion conditions enabled large reductions in the concentrations of enzymes required for effective saccharification. The amount of Celluclast required was reduced from 100 U (4.35 FPU) g⁻¹ substrate to 20 U g⁻¹ substrate, and additional beta-glucosidase was reduced from 100 to 2 U g⁻¹ substrate.     

Growth of microalgae using CO2 enriched air for biodiesel production in supercritical CO2

The optimum conditions for lipids productivity and CO₂ fixation of two freshwater strains, namely Chlorella sp. and Pseudochlorococcum sp. and a marine strain; namely Nannochlorpsis sp. have been determined in this work. The species were grown autotrophically under aeration with different CO₂ concentrations, ranging from 0.04 to 2% (v/v). The growth was tested in nitrogen sufficient and deficient media at different salinities (0.49–680 mM) and temperatures of 27 and 31 °C. The optimum CO₂ enrichment was found to be 1% (v/v) in both media. Nitrogen starvation resulted in an increase in lipid contents, but at lower growth rate, which resulted in a lower overall lipid productivity. The experimental data were used to determine the kinetic parameters of Haldane model. The Chlorella sp. grew well at salinity levels of up to 460 mM. The highest CO₂ biofixation rate was observed when Chlorella sp. was grown at 27 °C in seawater (230 mM NaCl).Lipids were extracted from harvested marine strain, Nannochlorpsis sp., and enzymatically transesterified to produce biodiesel in supercritical CO₂ (SC–CO₂) medium. It was found that the conversion of biodiesel produced from microalgae lipids was 35% higher than that achieved using lamb fat in a similar system.     

Will energy crop yields meet expectations?

Expectations are high for energy crops. Government policies in the United States and Europe are increasingly supporting biofuel and heat and power from cellulose, and biomass is touted as a partial solution to energy security and greenhouse gas mitigation. Here, we review the literature for yields of 5 major potential energy crops: Miscanthus spp., Panicum virgatum (switchgrass), Populus spp. (poplar), Salix spp. (willow), and Eucalyptus spp. Very high yields have been achieved for each of these types of energy crops, up to 40 t ha⁻¹ y⁻¹ in small, intensively managed trials. But yields are significantly lower in semi-commercial scale trials, due to biomass losses with drying, harvesting inefficiency under real world conditions, and edge effects in small plots. To avoid competition with food, energy crops should be grown on non-agricultural land, which also lowers yields. While there is potential for yield improvement for each of these crops through further research and breeding programs, for several reasons the rate of yield increase is likely to be slower than historically has been achieved for cereals; these include relatively low investment, long breeding periods, low yield response of perennial grasses to fertilizer, and inapplicability of manipulating the harvest index. Miscanthus × giganteus faces particular challenges as it is a sterile hybrid. Moderate and realistic expectations for the current and future performance of energy crops are vital to understanding the likely cost and the potential of large-scale production.