Comparison of microwave and thermal cure of epoxy–anhydride resins: Mechanical properties and dynamic characteristics

The objective of this work was to compare the mechanical properties of epoxy resins cured by thermal heating and microwave heating. Epoxy–anhydride (100:80) resins were cured in a domestic microwave oven and in a thermal oven. The hardening agents included methyl tetrahydrophthalic anhydride and methyl hexahydrophthalic anhydride. Three types of accelerators were employed. Thermal curing was performed at 150°C for 20 and 14 min for resins containing 1 and 4% accelerator, respectively. Microwave curing was carried out at a low power (207 or 276 W) for 10, 14, and 20 min. All cured resins were investigated with respect to their tensile properties, notched Izod impact resistance, and flexural properties (three‐point bending) according to ASTM standards. The tan δ and activation energy values were investigated with dynamic mechanical thermal analysis, and the extent of conversion was determined with differential scanning calorimetry. The differences in the mechanical properties of the thermally cured and microwave‐cured samples depended on the resin formulation and properties. Equivalent or better mechanical properties were obtained by microwave curing, in comparison with those obtained by thermal curing. Microwave curing also provided a shorter cure time and an equivalent degree of conversion. The glass‐transition temperatures (tan δ) of the thermally and microwave‐cured resins were comparable, and their activation energies were in the range of 327–521 kJ/mol. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 97: 1442–1461, 2005     

Effect of curing method on mechanical and morphological properties of carbon fiber epoxy composites for solid rocket motor

Microwave (MW) curing and conventional thermal curing techniques were utilized to cure carbon fiber epoxy composites for solid rocket motor to investigate the effect of curing method on their mechanical and morphological properties. In this work, tensile and inplane shear strength properties together with morphological properties were compared between MW cured and thermally cured composites, and the mechanism for MW curing was analyzed. The study shows that 83% cure cycle time reduction is achieved through MW curing. Mechanism analysis for MW curing indicates the resin at the surface layer and interior parts of the composites is cured with different forms. Temperature monitoring during MW processing indicates the uneven electric field distribution in the domestic MW oven. Fourier transform infrared spectrum measurements reveal that MWs do not initiate any new chemical reactions during the curing process of the composites. Thermal analysis using differential scanning calorimeter reveals higher glass transition temperature (T_g) of MW cured composites compared with thermally cured counterparts. Moreover, the MW cured composites show 17% lower tensile strength than thermally cured composites, whereas a 3% increase of the inplane shear strength is observed for MW cured composites, which is also confirmed via scanning electron microscope by means of better coating the fibers with resin, increased fiber wetting and less fiber pullout. POLYM. COMPOS., 36:1703–1711, 2015. © 2014 Society of Plastics Engineers     

碳纤维增强海因环氧树脂复合材料拉挤工艺性能研究

通过DSC分析及粘度和力学性能测试研究了海因环氧树脂/甲基六氢苯二酸酐/2-乙基-4-甲基咪唑体系的粘度特性,固化反应动力学,浇铸体及碳纤维增强拉挤成型复合材料的力学性能。结果表明,该体系在50℃下,15 h内粘度<500 mPa.s,可以满足拉挤工艺要求。其碳纤维复合材料的玻璃化温度达到206℃以上,剪切强度达到80 MPa,耐热性和力学性能良好。     

Synthesis and characterization of a novel silicon‐containing polytriazole resin

4,4′‐Diazidomethylbiphenyl (DAMBP) and poly(dimethylsilylene‐ethynylenephenyleneethynylene) (PDMSEPE) were thermally polymerized to form a novel silicon‐containing polytriazole resin (PDMSEPE‐DAMBP) by 1,3‐dipolar cycloaddition. Differential scanning calorimetry, FTIR, and ¹³C‐NMR were used to characterize the curing behaviors of PDMSEPE‐DAMBP resins. The results indicated that the resins could cure at temperatures as low as 80°C. Dynamic mechanical analysis showed that there was a glass transition at 302°C for the cured PDMSEPE‐DAMBP resin. The carbon fiber (T700) reinforced PDMSEPE‐DAMBP composites exhibited excellent mechanical properties at room temperature and high property retention at 250°C. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Replacement of styrene with acrylated epoxidized soybean oil in an unsaturated polyester resin from propylene glycol and maleic anhydride

A nonvolatile, vegetable‐oil based chemical, acrylated epoxidized soybean oil (AESO) was investigated as a replacement of volatile and toxic styrene in one of commercial UPE resins styrene‐(PG‐MA) that is a mixture of styrene and a UPE plastic from propylene glycol and maleic anhydride (PG‐MA). Neither AESO nor PG‐MA was capable of forming a strong matrix, respectively, for glass fiber‐reinforced composites. However, a mixture of AESO and PG‐MA resulted in glass fiber‐reinforced AESO‐(PG‐MA) composites that were comparable or even superior to those from styrene‐(PG‐MA) in terms of the flexural and tensile properties. Effects of AESO contents on the mechanical and viscoelastic properties of the glass fiber‐reinforced AESO‐(PG‐MA) composites were investigated. Resin viscosity and resin pot life as a function of temperature were studied. The curing mechanism of the AESO‐(PG‐MA) resins is also discussed. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45056.     

Preparation,characterization, and composites from low formaldehyde emission urea–formaldehyde–casein copolymer

A modified urea–formaldehyde resin was synthesized by the condensation of urea and formaldehyde in the presence of varying proportions of casein up to 25% (w/w) of urea under alkaline conditions. All the prepared resins were characterized by free‐formaldehyde content, viscosity measurements, and number‐average molecular weight determination by vapor pressure osmometry and IR spectroscopy. Their curing kinetics were studied isothermally and by differential scanning calorimetry on dynamic runs. The resin samples were cured isothermally at 60, 80, and 100°C using ammonium chloride and hydroxylamine hydrochloride as curing agents. The isothermal curing study was also performed with hexamine at 120°C. Cured resins were characterized by IR and thermogravimetric analysis. The resin samples were employed for the fabrication of glass fiber and jute fiber reinforced composites by maintaining 2 : 3 and 3 : 2 proportions of resin/reinforcement, respectively. The prepared composites were tested for their mechanical properties and resistance toward various chemicals. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 98: 531–537, 2005     

Toughened epoxy resin matrix for a membrane shell by wet filament winding

A toughened epoxy resin matrix was obtained with a reactive toughening agent and methyl hexahydrophthalic anhydride as a curing agent. The mechanical properties of the modified epoxy resin and its glass‐fiber‐reinforced composites were investigated systematically. The modified epoxy resin matrix possessed many good properties, including a high flexural strength (138 MPa), high elongation at break (5.2%), low viscosity, long pot life at room temperature, and good water resistance. In addition, the glass‐fiber‐reinforced composites showed a high strength conversion ratio of the glass fiber (86.7%) and good fatigue resistance. The results demonstrated that the modified epoxy resin matrix is very suitable for applications in reverse osmosis membrane shell products fabricated with wet filament winding for water treatment. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2009     

Synthesis and characterization of methacrylated star‐shaped poly(lactic acid) employing core molecules with different hydroxyl groups

A set of novel bio‐based star‐shaped thermoset resins was synthesized via ring‐opening polymerization of lactide and employing different multi‐hydroxyl core molecules, including ethylene glycol, glycerol, and erythritol. The branches were end‐functionalized with methacrylic anhydride. The effect of the core molecule on the melt viscosity, the curing behavior of the thermosets and also, the thermomechanical properties of the cured resins were investigated. Resins were characterized by Fourier‐transform infrared spectroscopy, ¹³C‐NMR, and ¹H‐NMR to confirm the chemical structure. Rheological analysis and differential scanning calorimetry analysis were performed to obtain the melt viscosity and the curing behavior of the studied star‐shaped resins. Thermomechanical properties of the cured resins were also measured by dynamic mechanical analysis. The erythritol‐based resin had superior thermomechanical properties compared to the other resins and also, lower melt viscosity compared to the glycerol‐based resin. These are of desired characteristics for a resin, intended to be used as a matrix for the structural composites. Thermomechanical properties of the cured resins were also compared to a commercial unsaturated polyester resin and the experimental results indicated that erythritol‐based resin with 82% bio‐based content has superior thermomechanical properties, compared to the commercial polyester resin. Results of this study indicated that although core molecule with higher number of hydroxyl groups results in resins with better thermomechanical properties, number of hydroxyl groups is not the only governing factor for average molecular weight and melt viscosity of the uncured S‐LA resins. © 2017 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2017 , 134, 45341.     

Comparison of curing agents for epoxidized vegetable oils applied to composites

Interest in polymers from renewable sources, as alternatives to petroleum‐based polymers, remains strong; however, their performance must be acceptable. To improve performance of epoxidized vegetable oils (EVO) in composite matrix applications, five amine curing agents were evaluated and compared with an anhydride agent used previously. Curing agents were tested in matrices for composites containing a petroleum‐based epoxy resin plus 0% or 30% epoxidized oil from canola (ECO) and soybean (ESO). The two amines with the highest glass transition temperature, determined by differential scanning calorimetry, were selected for characterization by dynamic mechanical analysis; bis (p‐aminocyclohexyl) methane (PACM) showed the highest performance. Amine: epoxy ratios 0.6 to 1.6 were then evaluated; ratios of 0.8 and 1.0 showed superior performance. E‐glass fiber reinforced composites with PACM/EVO showed thermal and mechanical performance slightly lower than the composites with 0% EVO and comparable with those of the anhydride curing agent. Therefore, ECO or ESO blended with petroleum‐based epoxy resins cured with PACM are recommended for its application in E‐glass reinforced composites. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Synthesis of rosin‐based flexible anhydride‐type curing agents and properties of the cured epoxy

BACKGROUND: Although rosin acid derivatives have received attention in polymer synthesis in recent years, to the best of our knowledge, they have rarely been employed as epoxy curing agents. The objective of the study reported here was to synthesize rosin‐based flexible anhydride‐type curing agents and demonstrate that the flexibility of a cured epoxy resin can be manipulated by selection of rosin‐based anhydride‐type curing agents with appropriate molecular rigidity/flexibility. RESULTS: Maleopimarate‐terminated low molecular weight polycaprolactones (PCLs) were synthesized and studied as anhydride‐type curing agents for epoxy curing. The chemical structures of the products were confirmed using ¹H NMR spectroscopy and Fourier transform infrared spectroscopy. Mechanical and thermal properties of the cured epoxy resins were studied. The results indicate that both the epoxy/anhydride equivalent ratio and the molecular weight of PCL diol play important roles in the properties of cured resins. CONCLUSION: Rosin‐based anhydride‐terminated polyesters could be used as bio‐based epoxy curing agents. A broad spectrum of mechanical and thermal properties of the cured epoxy resins can be obtained by varying the molecular length of the polyester segment and the epoxy/curing agent ratio. Copyright © 2009 Society of Chemical Industry     

热固性树脂微波固化研究进展

综述了近年来热固性树脂及其复合材料的微波固化研究进展,重点讨论了热固性树脂微波固化与加热固化的比较,热固性树脂微波固化工艺,颗粒、纤维增强树脂基复合材料的微波固化研究。研究发现微波固化和热固化在本质上是相同的,然而,微波极大地加速了固化进程,对体系性能无损害;加入无机、金属填料以及纤维可以改变体系介电性能,控制微波工艺对材料进行精加工。最后介绍了微波热效应原理,并展望了微波热固化技术发展与应用。     

Thermal and mechanical properties of microwave‐ and heat‐cured poly(methyl methacrylate) used as dental base material

The thermal and mechanical properties of dental base materials cured by microwave and conventional heat methods were studied. The commercial dental base poly(methyl metacrylate) (PMMA) powder and liquid were mixed in a 3/1 ratio. They were polymerized by a peroxy catalyst at 65°C, then cured with a boiling water temperature and microwave radiation for periods of 5, 10, 15, 20, 25, 30, and 35 min for heat curing and 1, 2, 3, 5, and 7 min for microwave radiation. The microwave radiation outputs used were 500 and 700 W. The products of 5‐min heat curing and 1‐, 2‐, and 7‐min microwave curing were soluble in chloroform. All the others were partially soluble. The viscosity‐average molecular weights of the soluble samples were about 1 × 10⁶. The thermal properties of the polymer samples were studied by differential scanning calorimetry (DSC). For the samples that were not cured completely, broad exothermic peaks at around 125°C were obtained in the DSC thermograms. The glass‐transition temperatures for completely cured samples were 110–120°C. The mechanical properties of the samples were determined from tensile and three‐point bending tests. The elastic modulus was highest for samples obtained by the conventional method with a 30‐min curing period. However, the bending modulus was highest for 7‐min cured samples in a 700‐W microwave. The mechanical strengths of the 700‐W output were higher than those at 500 W. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 251–256, 2003     

Glass Fiber Reinforced Composites and Thermal Study of Flame Retardant Epoxy Resin Systems Using Anhydride Curing Agents

Differential scanning calorimetric (DSC) curing kinetics of the epoxy systems composed of conventional, tetrafunctional, and phosphorylated epoxy resins were investigated using different anhydrides as curing agents and triethylamine as curing catalyst. The dynamic scans were analyzed to estimate the activation energy and the order of reaction for the curing process using some empirical relations. The thermal stability of the cured epoxy resins was studied by thermogravimetric analysis in nitrogen atmosphere at a heating rate of 10°C/min. Glass fiber reinforced composites were fabricated and evaluated for their limiting oxygen index, mechanical properties, dielectric properties, and chemical resistance. The incorporation of an epoxy fortifier showed significant improvement in mechanical properties.     

Kinetics modeling of carbon‐fiber‐reinforced bismaleimide composites under microwave and thermal curing

This article focuses on the analysis of the curing kinetics of carbon‐fiber‐reinforced bismaleimide (BMI) composites during microwave (MW) curing. A nonisothermal differential scanning calorimetry (DSC) method was used to obtain an accurate kinetic model. The degree of curing, chemical characterization, and glass‐transition temperature of the resin and composites cured by thermal and MW heating were analyzed with DSC, Fourier transform infrared spectroscopy, and dynamic mechanical analysis. The experimental results indicate that MW accelerated the crosslinking reaction of the BMI resin and had different effects on the reaction processes, especially for the glass‐transition temperature and chemical bonds. However, the curing reaction rate of the BMI resin decreased when the carbon fibers were added to the BMI resin during thermal and MW curing. According to the experimental results, the curing kinetic model of the BMI composite was used to provide a theoretical foundation for MW curing analysis. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43770.     

微波技术在环氧树脂及其复合材料中的应用

论述了近年来微波固化技术在环氧树脂及其复合材料固化中的应用,重点比较了微波固化与传统热固化后环氧树脂及其复合材料的力学性能、热性能和粘结强度的变化,并对环氧树脂复合材料微波固化的研究进行了展望。     

Electron‐beam curing of thick thermoset composites: Effect of temperature and fiber

Electron‐beam curing of thermoset resins used in fiber‐reinforced composites has been investigated. Two resins, a bisphenol‐A acrylate and methacrylate, were used as model systems. The temperature was monitored during cure to know the thermal history of the composite during cure. The thermo‐mechanical properties were measured on the cured samples. It could be seen that all these values were influenced by the nature (glass or carbon) and amount (0–50 wt.‐%) of fiber. A linear correlation was found between the maximum temperature during cure and the glass transition temperature. It was shown that it is possible to compensate for a lack of heat during cure in systems with too low exotherms. Some influence on the network homogeneity was also noticed when the thermal energy available during cure was too low.     

Effect of lactic acid chain length on thermomechanical properties of star‐LA‐xylitol resins and jute reinforced biocomposites

Star‐shaped bio‐based resins were synthesized by direct condensation of lactic acid (LA) with xylitol followed by end‐functionalizing of branches by methacrylic anhydride with three different LA chain lengths (3, 5 and 7). The thermomechanical and structural properties of the resins were characterized by ¹³C NMR, Fourier transform IR spectroscopy, rheometry, DSC, dynamic mechanical analysis (DMA), TGA and flexural and tensile tests. An evaluation of the effect of chain length on the synthesized resins showed that the resin with five LAs exhibited the most favorable thermomechanical properties. Also, the resin's glass transition temperature (103 °C) was substantially higher than that of the thermoplast PLA (ca 55 °C). The resin had low viscosity at its processing temperature (80 °C). The compatibility of the resin with natural fibers was investigated for biocomposite manufacturing. Finally, composites were produced from the n5‐resin (80 wt% fiber content) using jute fiber. The thermomechanical and morphological properties of the biocomposites were compared with jute‐PLA composites and a hybrid composite made of the impregnated jute fibers with n5 resin and PLA. SEM and DMA showed that the n5‐jute composites had better mechanical properties than the other composites produced. Inexpensive monomers, good thermomechanical properties and good processability of the n5 resin make the resin comparable with commercial unsaturated polyester resins. © 2017 Society of Chemical Industry     

Mechanical properties of E‐glass fiber reinforced siliconized epoxy polymer composites

Siliconized epoxy‐matrix systems have been developed by an interpenetrating mechanism using epoxy resins GY 250 and LY 556 (Ciba‐Geigy) and hydroxyl terminated polydimethylsiloxane with γ‐aminopropyltriethoxysilane as crosslinker in the presence of dibutyltindilaurate catalyst. Aliphatic amine (HY 951, Ciba‐Geigy), aromatic amine (HT 972, Ciba‐Geigy) and polyamidoamine (HY 840, Ciba‐Geigy) are used as curing agents for epoxy resins. The tentative level of 10% siloxane introduction into epoxy resin has been ascertained from experimental studies to obtain reasonable improvements in the impact behavior without compromising other mechanical properties. The impact behavior of E‐glass reinforced composites made from the siliconized epoxy resin is enhanced to 2–4 times over that measured on the composites made from a pure epoxy resin. Composites cured with aromatic amine impart better mechanical properties than those cured with aliphatic amine and polyamidoamine.     

Comparative study of silicon‐containing cycloaliphatic epoxides between different chemical structures and curing mechanisms for potential light‐emitting diode encapsulation applications

The aim of this paper is to systematically investigate the curing behavior of three novel di‐ and trifunctional silicon‐containing cycloaliphatic epoxy resins by both anhydride and cationic ring‐opening polymerization methods as well as the viscoelasticity, thermal stability, water absorption and optical properties of the cured products. Differential scanning calorimetry curves show that, relative to anhydride curing, cationic polymerization can decrease the curing temperature to below 120 °C, and the reaction exothermic peaks become very narrow and sharp, exhibiting rapid curing characteristics at moderately low temperature. In addition, the differences between the anhydride and cationic curing methods bring about interesting variations in physical properties for the cured products which are well related to their chemical structures, polymerization mechanism, crosslinking density, segmental flexibility and inter‐segmental distance. The excellent transparency, rapid cationic curing rate, good thermal stability and high glass transition temperature of over 275 °C make this series of epoxy resins promising candidates for light‐emitting diode encapsulation applications. © 2012 Society of Chemical Industry     

Thermal and dynamic mechanical properties of microwave and heat‐cured poly(methyl methacrylate) used as dental base material

In this study, the particle size distribution, molecular weight, thermal analysis (TGA) differential scanning calorimetry (DSC) and thermogravimetric analysis, and dynamic mechanical analysis (DMA) of poly(methyl methacrylate) used as dental base material were investigated. The commercial raw material used were prepared for microwave curing, and they were cured by microwave and conventional heat methods. The average particle size of the powder studied (103.1 μm) were much larger than that of the commercial powders (50–78 μm) for conventional curing. The particle size dietribution were almost symmetrical and narrow. The viscosity‐average molecular weight were larger for microwave curing and increased with curing time. The glass transition temperature T_g measured (about 110°C) by DSC increased with curing period in microwave oven. The values of T_g were close to each other for both curing techniques. The degradation temperature range observed by TGA were 200–377°C. The movements of molecular chains in their conformations were studied by DMA in the form of changes in different mechanical properties with temperature. It was shown that crosslinking increased with increase of curing time. The changes were more noticeable in microwave curing compared to conventional heat curing. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 74: 2971–2978, 1999