2D-Antimonene-assisted hetero-epitaxial growth of perovskite films for efficient solar cells

There are many grain boundaries and defects in polycrystalline perovskite films, resulting in sacrificed efficiency and instability for perovskite solar cells (PSCs). By regulating the growth of perovskite grains along the vertical direction through epitaxial growth, one may expect fewer grain-boundaries, effective charge transport, improved crystalline quality, and reduced defect density. However, there is still no suitable epitaxial growth substrate for perovskite. Here, we developed an electrochemical lithiation intercalation and ultrasonication method to prepare high-quality antimonene nanosheets (ANs). It is found that the perovskite film grows preferentially along the (012) planes of the ANs that have perfect lattice match with the (001) planes of the perovskite, leading to a high-quality perovskite film with a preferential orientation along the [001] direction and greatly enlarged grain size. Consequently, the oriented perovskite-based PSC achieves a remarkable PCE of 24.54% and shows an enhanced stability under ambient conditions, thermal annealing or light illumination. This work opens an effective avenue to effectively control the oriented growth of perovskite film for high-performance perovskite optoelectrical devices.     

Magnetic Field-Assisted Interface Embedding Strategy to Construct 2D/3D Composite Structure for Stable Perovskite Solar Cells with Efficiency Over 24%

Perovskite solar cells (PSCs) based on 2D/3D composite structure have shown enormous potential to combine high efficiency of 3D perovskite with high stability of 2D perovskite. However, there are still substantial non-radiative losses produced from trap states at grain boundaries or on the surface of conventional 2D/3D composite structure perovskite film, which limits device performance and stability. In this work, a multifunctional magnetic field-assisted interfacial embedding strategy is developed to construct 2D/3D composite structure. The composite structure not only improves crystallinity and passivates defects of perovskite layer, but also can efficiently promote vertical hole transport and provide lateral barrier effect. Meanwhile, the composite structure also forms a good surface and internal encapsulation of 3D perovskite to inhibit water diffusion. As a result, the multifunctional effect effectively improves open-circuit voltage and fill factor, reaching maximum values of 1.246 V and 81.36%, respectively, and finally achieves power conversion efficiency (PCE) of 24.21%. The unencapsulated devices also demonstrate highly improved long-term stability and humidity stability. Furthermore, an augmented performance of 21.23% is achieved, which is the highest PCE of flexible device based on 2D/3D composite perovskite films coupled with the best mechanical stability due to the 2D/3D alternating structure.     

A Novel Conductive Mesoporous Layer with a Dynamic Two‐Step Deposition Strategy Boosts Efficiency of Perovskite Solar Cells to 20%

Lead halide perovskite solar cells (PSCs) with the high power conversion efficiency (PCE) typically use mesoporous metal oxide nanoparticles as the scaffold and electron‐transport layers. However, the traditional mesoporous layer suffers from low electron conductivity and severe carrier recombination. Here, antimony‐doped tin oxide nanorod arrays are proposed as novel transparent conductive mesoporous layers in PSCs. Such a mesoporous layer improves the electron transport as well as light utilization. To resolve the common problem of uneven growth of perovskite on rough surface, the dynamic two‐step spin coating strategy is proposed to prepare highly smooth, dense, and crystallized perovskite films with micrometer‐scale grains, largely reducing the carrier recombination ratio. The conductive mesoporous layer and high‐quality perovskite film eventually render the PSC with a remarkable PCE of 20.1% with excellent reproducibility. These findings provide a new avenue to further design high‐efficiency PSCs from the aspect of carrier transport and recombination.     

Extrinsic Ion Distribution Induced Field Effect in CsPbIBr2 Perovskite Solar Cells

Excellent power conversion efficiency (PCE) and stability are the primary forces that propel the all‐inorganic cesium‐based halide perovskite solar cells (PSCs) toward commercialization. However, the intrinsic high density of trap state and internal nonradiative recombination of CsPbIBr₂ perovskite film are the barriers that limit its development. In the present study, a facile additive strategy is introduced to fabricate highly efficient CsPbIBr₂ PSCs by incorporating sulfamic acid sodium salt (SAS) into the perovskite layer. The additive can control the crystallization behaviors and optimize morphology, as well as effectively passivate defects in the bulk perovskite film, thereby resulting in a high‐quality perovskite. In addition, SAS in perovskite has possibly introduced an additional internal electric field effect that favors electron transport and injection due to inhomogeneous ion distribution. A champion PCE of 10.57% (steady‐output efficiency is 9.99%) is achieved under 1 Sun illumination, which surpasses that of the contrast sample by 16.84%. The modified perovskite film also exhibits improved moisture stability. The unencapsulated device maintains over 80% initial PCE after aging for 198 h in air. The results provide a suitable additive for inorganic perovskite and introduce a new conjecture to explain the function of additives in PSCs more rationally.     

具有2D-EDAPbI4薄覆盖层的环境稳定的FAPbI3基钙钛矿太阳能电池（英文）

二维(2D)卤化铅钙钛矿材料是钙钛矿太阳能电池(PSC)中最有前途的吸光材料之一,具有优异的稳定性和缺陷钝化作用.然而,这些稳定的二维PSC的转换效率仍远远落后于三维钙钛矿电池.在本文中我们通过原位生长的方法将2D EDAPbI4层成功制备在3D FAPbI3层表面。这种合理设计的2D-3D钙钛矿薄膜分层结构可以明显提高电池的效率.另外,由于EDAPbI4层的高抗湿性和抑制迁移, 2D-3D电池器件显示出明显增强的长期稳定性,在200 h内一直保持初始转换效率,甚至在500 h后仍能保持其初始转化效率的90%.     

Highly Efficient and Stable Perovskite Solar Cells: Competitive Crystallization Strategy and Synergistic Passivation

Defects of perovskite (PVK) films are one of the main obstacles to achieving high-performance perovskite solar cells (PSCs). Here, the authors fabricated highly efficient and stable PSCs by introducing prolinamide (ProA) into the PbI₂ precursor solution, which improves the performance of PSCs by the competitive crystallization and efficient defect passivation of perovskite. The theoretical and experimental results indicate that ProA forms an adduct with PbI₂, competes with free I⁻ to coordinate with Pb²⁺, leads to the increase of the energy barrier of crystallization, and slows down the crystallization rate. Furthermore, the dual-site synergistic passivation of ProA is revealed by density functional theory (DFT) calculations and experimental results. ProA effectively reduces non-radiative recombination in the resultant films to improve the photovoltaic performance of PSCs. Notably, ProA-assisted PSCs achieve 24.61% power conversion efficiency (PCE) for the champion device and the stability of PSCs devices under ambient and thermal environments is improved.     

Highly Efficient and Stable Flexible Perovskite Solar Cells with Metal Oxides Nanoparticle Charge Extraction Layers

In this study, the fabrication of highly efficient and durable flexible inverted perovskite solar cells (PSCs) is reported. Presynthesized, solution‐derived NiO_x and ZnO nanoparticles films are employed at room temperature as a hole transport layer (HTL) and electron transport layer (ETL), respectively. The triple cation perovskite films are produced in a single step and for the sake of comparison, ultrasmooth and pinhole‐free absorbing layers are also fabricated using MAPbI₃ perovskite. The triple cation perovskite cells exhibit champion power conversion efficiencies (PCEs) of 18.6% with high stabilized power conversion efficiency of 17.7% on rigid glass/indium tin oxide (ITO) substrates (comparing with 16.6% PCE with 16.1% stabilized output efficiency for the flexible polyethylene naphthalate (PEN)/thin film barrier/ITO substrates). More interestingly, the durability of flexible PSC under simulation of operative condition is proved. Over 85% of the maximum stabilized output efficiency is retained after 1000 h aging employing a thin MAPbI₃ perovskite (over 90% after 500 h with a thick triple cation perovskite). This result is comparable to a similar state of the art rigid PSC and represents a breakthrough in the stability of flexible PSC using ETLs and HTLs compatible with roll to roll production speed, thanks to their room temperature processing.     

Efficient,Hysteresis‐Free,and Stable Perovskite Solar Cells with ZnO as Electron‐Transport Layer: Effect of Surface Passivation

The power conversion efficiency of perovskite solar cells (PSCs) has ascended from 3.8% to 22.1% in recent years. ZnO has been well‐documented as an excellent electron‐transport material. However, the poor chemical compatibility between ZnO and organo‐metal halide perovskite makes it highly challenging to obtain highly efficient and stable PSCs using ZnO as the electron‐transport layer. It is demonstrated in this work that the surface passivation of ZnO by a thin layer of MgO and protonated ethanolamine (EA) readily makes ZnO as a very promising electron‐transporting material for creating hysteresis‐free, efficient, and stable PSCs. Systematic studies in this work reveal several important roles of the modification: (i) MgO inhibits the interfacial charge recombination, and thus enhances cell performance and stability; (ii) the protonated EA promotes the effective electron transport from perovskite to ZnO, further fully eliminating PSCs hysteresis; (iii) the modification makes ZnO compatible with perovskite, nicely resolving the instability of ZnO/perovskite interface. With all these findings, PSCs with the best efficiency up to 21.1% and no hysteresis are successfully fabricated. PSCs stable in air for more than 300 h are achieved when graphene is used to further encapsulate the cells.     

Organic-Salt-Assisted Crystal Growth and Orientation of Quasi-2D Ruddlesden–Popper Perovskites for Solar Cells with Efficiency over 19%

Quasi-2D Ruddlesden–Popper (RP) perovskite solar cells (PSCs) have drawn significant attention due to their appealing environmental stability compared to their 3D counterparts. However, the relatively low power conversion efficiency (PCE) greatly limits their applications. Here, high photovoltaic performance is demonstrated for quasi-2D RP PSCs using 2-thiophenemethylammonium as spacer with nominal n-value of 5, which is based on the stoichiometry of the precursors. The incorporation of formamidinium (FA) in quasi-2D RP perovskites reduces the bandgap and improves the light absorption ability, resulting in enlarged photocurrent and an increased PCE of 16.18%, which is higher than that of reported analogous methylammonium (MA)-based quasi-2D PSC (≈15%). A record high PCE of 19.06% is further demonstrated by using an organic salt, namely, 4-(trifluoromethyl)benzylammonium iodide, assisted crystal growth (OACG) technique, which can induce the crystal growth and orientation, tune the surface energy levels, and suppress the charge recombination losses. More importantly, the devices based on OACG-processed quasi-2D RP perovskites show remarkable environmental stability and thermal stability, for example, the PCE retaining ≈96% of its initial value after storage at 80 °C for 576 h, while only ≈37% of the original efficiency left for FAPbI₃-based 3D PSCs.     

基于对氯苄胺的2D/3D钙钛矿太阳能电池

三维(3D)有机–无机金属卤化物钙钛矿薄膜的表面和晶界处存在大量缺陷,容易导致载流子的非辐射复合并加快3D钙钛矿分解,进而影响钙钛矿太阳能电池(PSCs)能量转换效率(PCE)及稳定性.本研究通过引入对氯苄胺阳离子,与3D钙钛矿薄膜及其表面过剩的碘化铅反应后原位形成了二维(2D)钙钛矿,实现了对3D钙钛矿薄膜表面和晶界...     

Bifacial Contact Junction Engineering for High‐Performance Perovskite Solar Cells with Efficiency Exceeding 21%

Ordered 1D metal oxide structure is desirable in thin film solar cells owing to its excellent charge collection capability. However, the electron transfer in 1D electron transporting layer (ETL)‐based devices is still limited to a submicrometer‐long pathway that is vertical to the substrate. Here, an innovative closely packed rutile TiO₂ nanowire (CRTNW) network parallel to the facet of fluorine‐doped tin oxide (FTO) substrate is reported, which can serve as a 1D nanoscale electron transport pathway for efficient perovskite solar cells (PSCs). The PSC constructed using newly prepared CRTNW ETL achieves an impressive power conversion efficiency of 21.10%, which can be attributed to the facilitated electron extraction induced by the favorable junctions formed at FTO/ETL and ETL/perovskite interfaces and also the suppressed charge recombination originating from improved perovskite morphology with large grains, flat surface, and good surface coverage. The bifacial contact junctions engineering also enables large‐area device fabrication. The PSC with 1 cm² aperture yields an efficiency of 19.50% under one sun illumination. This work highlights the significance of controlling the orientation and packing density of the ordered 1D oxide nanostructured thin films for highly efficient optoelectronic devices in a large‐scale manner.     

醋酸铅添加剂在印刷钙钛矿太阳能电池中的应用

印刷钙钛矿太阳能电池采用无机介孔骨架包覆有机无机杂化钙钛矿材料的器件结构,制备工艺简单,原材料成本低廉,且稳定性优异.然而,在介孔骨架中均匀沉积高质量的钙钛矿材料存在一定困难.本研究通过在典型钙钛矿材料甲胺铅碘(MAPbI3)前驱液中引入醋酸铅(Pb(Ac)2)作为添加剂,加快钙钛矿晶体的成核从而改善其在介孔骨架中的生...     

空穴传输材料在高效钙钛矿太阳能电池中的发展演变

钙钛矿太阳能电池(PSCs)转换效率已从2009年的3.8%上升到2017年的22.7%,其快速的发展可能使光伏工业进入革命新阶段。空穴传输材料(HTM)是构成高效钙钛矿太阳能电池的重要组成部分,开发和设计导电性好、成本低、稳定性好的空穴传输层材料对钙钛矿太阳能电池的研究显得非常重要。本文将近几年应用于钙钛矿太阳能电池中较高效的空穴传输材料归纳为有机小分子类、有机聚合物类和无机材料类,同时也介绍了无空穴传输层的钙钛矿电池。详细评述了基于各类空穴传输材料的钙钛矿太阳能电池的光电性能及稳定性,重点讨论了HOMO能级、空穴迁移率、添加剂的掺杂等因素对钙钛矿太阳能电池的影响。最后指出了空穴传输材料未来的研究重点和发展趋势。     

Metal-Organic Framework Materials in Perovskite Solar Cells: Recent Advancements and Perspectives

Organic–inorganic hybrid perovskite solar cells (PSCs) are among the most promising candidates for the next generation of photovoltaic devices because of the significant increase in their power conversion efficiency (PCE) from less than 10% to 25.7% in past decade. The metal-organic framework (MOF) materials owing to their unique properties, such as large specific surface area, abundant binding sites, adjustable nanostructures, and synergistic effects, are used as additives or functional layers to enhance the device performance and long-term stability of PSCs. This review focuses on the recent advancements in the applications of MOFs as/in different functional layers of PSCs. The photovoltaic performance, impact, and advantages of MOF materials integrated into the perovskite absorber, electron transport layer, hole transport layer, and interfacial layer are reviewed. In addition, the applicability of MOFs to mitigate leakage of Pb²⁺ from halide perovskites and corresponding devices is discussed. This review concludes with the perspectives on further research directions for employing MOFs in PSCs.     

Dual function of a high-contrast hydrophobic-hydrophilic coating for enhanced stability of perovskite solar cells in extremely humid environments

In spite of a continuous increase in their power conversion efficiency (PCE) and an economically viable fabrication process,organic-inorganic perovskite solar cells (PSCs) pose a significant problem when used in practical applications:They show fast degradation of the PCE when exposed to very humid environments.In this study,the stability of PSCs under very humid conditions is greatly enhanced by coating the surface of the PSC devices with a multi-layer film consisting of ultrahydrophobic and relatively hydrophilic layers.A hydrophobic composite of poly(methyl methacrylate) (PMMA),polyurethane (PU),and SiO2 nanoparticles successfully retards the water molecules from very humid surroundings.Also,the hydrophilic layer with moderately PMMA captures the residual moisture within the perovskite layer;subsequently,the perovskite layer recovers.This dual function of the coating film keeps the PCE of PSCs at 17.3％ for 180 min when exposed to over 95％ humidity.     

Interface engineering of high efficiency perovskite solar cells based on ZnO nanorods using atomic layer deposition

Despite the considerably improved efficiency of inorganic-organic metal hybrid perovskite solar cells (PSCs),electron transport is still a challenging issue.In this paper,we report the use of ZnO nanorods prepared by hydrothermal selfassembly as the electron transport layer in perovskite solar cells.The efficiency of the perovskite solar cells is significantly enhanced by passivating the interfacial defects via atomic layer deposition of A12O3 monolayers on the ZnO nanorods.By employing the A12O3 monolayers,the average power conversion efficiency of methylammonium lead iodide PSCs was increased from 10.33％ to 15.06％,and the highest efficiency obtained was 16.08％.We suggest that the passivation of defects using the atomic layer deposition of monolayers might provide a new pathway for the improvement of all types of PSCs..     

Perovskite Solar Cells with Inorganic Electron‐ and Hole‐Transport Layers Exhibiting Long‐Term (≈500 h) Stability at 85 °C under Continuous 1 Sun Illumination in Ambient Air

Despite the high power conversion efficiency (PCE) of perovskite solar cells (PSCs), poor long‐term stability is one of the main obstacles preventing their commercialization. Several approaches to enhance the stability of PSCs have been proposed. However, an accelerating stability test of PSCs at high temperature under the operating conditions in ambient air remains still to be demonstrated. Herein, interface‐engineered stable PSCs with inorganic charge‐transport layers are shown. The highly conductive Al‐doped ZnO films act as efficient electron‐transporting layers as well as dense passivation layers. This layer prevents underneath perovskite from moisture contact, evaporation of components, and reaction with a metal electrode. Finally, inverted‐type PSCs with inorganic charge‐transport layers exhibit a PCE of 18.45% and retain 86.7% of the initial efficiency for 500 h under continuous 1 Sun illumination at 85 °C in ambient air with electrical biases (at maximum power point tracking).     

Bidirectional Anions Gathering Strategy Afford Efficient Mixed Pb?Sn Perovskite Solar Cells

Mixed lead-tin (Pb Sn) perovskite solar cells (PSCs) possess low toxicity and adjustable bandgap for both single-junction and all-perovskite tandem solar cells. However, the performance of mixed Pb Sn PSCs still lags behind the theoretical efficiency. The uncontrollable crystallization and the resulting structural defect are important reasons. Here, the bidirectional anions gathering strategy (BAG) is reported by using Methylammonium acetate (MAAc) and Methylammonium thiocyanate (MASCN) as perovskite bulk additives, which Ac⁻ escapes from the perovskite film top surface while SCN⁻ gathers at the perovskite film bottom in the crystallization process. After the optoelectronic techniques, the bidirectional anions movement caused by the top-down gradient crystallization is demonstrated. The layer-by-layer crystallization can collect anions in the next layer and gather at the broader, enabling a controllable crystallization process, thus getting a high-quality perovskite film with better phase crystallinity and lower defect concentration. As a result, PSCs treated by the BAG strategy exhibit outstanding photovoltaic and electroluminescent performance with a champion efficiency of 22.14%. Additionally, it demonstrates excellent long-term stability, which retains ≈92.8% of its initial efficiency after 4000 h aging test in the N₂ glove box.     

Hybrid PbS Quantum‐Dot‐in‐Perovskite for High‐Efficiency Perovskite Solar Cell

In this study, a facile and effective approach to synthesize high‐quality perovskite‐quantum dots (QDs) hybrid film is demonstrated, which dramatically improves the photovoltaic performance of a perovskite solar cell (PSC). Adding PbS QDs into CH₃NH₃PbI₃ (MAPbI₃) precursor to form a QD‐in‐perovskite structure is found to be beneficial for the crystallization of perovskite, revealed by enlarged grain size, reduced fragmentized grains, enhanced characteristic peak intensity, and large percentage of (220) plane in X‐ray diffraction patterns. The hybrid film also shows higher carrier mobility, as evidenced by Hall Effect measurement. By taking all these advantages, the PSC based on MAPbI₃‐PbS hybrid film leads to an improvement in power conversion efficiency by 14% compared to that based on pure perovskite, primarily ascribed to higher current density and fill factor (FF). Ultimately, an efficiency reaching up to 18.6% and a FF of over ≈0.77 are achieved based on the PSC with hybrid film. Such a simple hybridizing technique opens up a promising method to improve the performance of PSCs, and has strong potential to be applied to prepare other hybrid composite materials.     

Reducing Hysteresis and Enhancing Performance of Perovskite Solar Cells Using Low‐Temperature Processed Y‐Doped SnO2 Nanosheets as Electron Selective Layers

Despite the rapid increase of efficiency, perovskite solar cells (PSCs) still face some challenges, one of which is the current–voltage hysteresis. Herein, it is reported that yttrium‐doped tin dioxide (Y‐SnO₂) electron selective layer (ESL) synthesized by an in situ hydrothermal growth process at 95 °C can significantly reduce the hysteresis and improve the performance of PSCs. Comparison studies reveal two main effects of Y doping of SnO₂ ESLs: (1) it promotes the formation of well‐aligned and more homogeneous distribution of SnO₂ nanosheet arrays (NSAs), which allows better perovskite infiltration, better contacts of perovskite with SnO₂ nanosheets, and improves electron transfer from perovskite to ESL; (2) it enlarges the band gap and upshifts the band energy levels, resulting in better energy level alignment with perovskite and reduced charge recombination at NSA/perovskite interfaces. As a result, PSCs using Y‐SnO₂ NSA ESLs exhibit much less hysteresis and better performance compared with the cells using pristine SnO₂ NSA ESLs. The champion cell using Y‐SnO₂ NSA ESL achieves a photovoltaic conversion efficiency of 17.29% (16.97%) when measured under reverse (forward) voltage scanning and a steady‐state efficiency of 16.25%. The results suggest that low‐temperature hydrothermal‐synthesized Y‐SnO₂ NSA is a promising ESL for fabricating efficient and hysteresis‐less PSC.