Seismotectonics of strike–slip earthquakes within the deep crust of southern Italy: Geometry, kinematics, stress field and crustal rheology of the Potenza 1990–1991 seismic sequences (Mmax 5.7)

We present a revision and a seismotectonic interpretation of deep crust strike–slip earthquake sequences that occurred in 1990–1991 in the Southern Apennines (Potenza area). The revision is motivated by: i) the striking similarity to a seismic sequence that occurred in 2002  140 km NNW, in an analogous tectonic context (Molise area), suggesting a common seismotectonic environment of regional importance; ii) the close proximity of such deep strike–slip seismicity with shallow extensional seismicity (Apennine area); and iii) the lack of knowledge about the mechanical properties of the crust that might justify the observed crustal seismicity. A comparison between the revised 1990–1991 earthquakes and the 2002 earthquakes, as well as the integration of seismological data with a rheological analysis offer new constraints on the regional seismotectonic context of crustal seismicity in the Southern Apennines. The seismological revision consists of a relocation of the aftershock sequences based on newly constrained velocity models. New focal mechanisms of the aftershocks are computed and the active state of stress is constrained via the use of a stress inversion technique. The relationships among the observed seismicity, the crustal structure of the Southern Apennines, and the rheological layering are analysed along a crustal section crossing southern Italy, by computing geotherms and two-mechanism (brittle frictional vs. ductile plastic strength) rheological profiles. The 1990–1991 seismicity is concentrated in a well-defined depth range (mostly between 15 and 23 km depths). This depth range corresponds to the upper pat of the middle crust underlying the Apulian sedimentary cover, in the footwall of the easternmost Apennine thrust system. The 3D distribution of the aftershocks, the fault kinematics, and the stress inversion indicate the activation of a right-lateral strike–slip fault striking N100°E under a stress field characterized by a sub-horizontal N142°-trending σ1 and a sub-horizontal N232°-trending σ3, very similar to the known stress field of the Gargano seismic zone in the Apulian foreland. The apparent anomalous depths of the earthquakes (> 15 km) and the confinement within a relatively narrow depth range are explained by the crustal rheology, which consists of a strong brittle layer at mid crustal depths sandwiched between two plastic horizons. This articulated rheological stratification is typical of the central part of the Southern Apennine crust, where the Apulian crust is overthrusted by Apennine units. Both the Potenza 1990–1991 and the Molise 2002 seismic sequences can be interpreted to be due to crustal E–W fault zones within the Apulian crust inherited from previous tectonic phases and overthrusted by Apennine units during the Late Pliocene–Middle Pleistocene. The present strike–slip tectonic regime reactivated these fault zones and caused them to move with an uneven mechanical behaviour; brittle seismogenic faulting is confined to the strong brittle part of the middle crust. This strong brittle layer might also act as a stress guide able to laterally transmit the deviatoric stresses responsible for the strike–slip regime in the Apulian crust and may explain the close proximity (nearly overlapping) of the strike–slip and normal faulting regimes in the Southern Apennines. From a methodological point of view, it seems that rather simple two-mechanism rheological profiles, though affected by uncertainties, are still a useful tool for estimating the rheological properties and likely seismogenic behaviour of the crust.     

Oblique strain partitioning and transpression on an inverted rift: The Castilian Branch of the Iberian Chain

The Iberian Chain is a wide intraplate deformation zone formed by the tectonic inversion during the Pyrenean orogeny of a Permian–Mesozoic basin developed in the eastern part of the Iberian Massif. The N–S convergence between Iberia and Eurasia from the Late Cretaceous to the Lower Miocene times produced significant intraplate deformation. The NW–SE oriented Castilian Branch of the Iberian Chain can be considered as a “key zone” where the proposed models for the Cenozoic tectonic evolution of the Iberian Chain can be tested. Structural style of basin inversion suggests mainly strike–slip displacements along previous NW–SE normal faults, developed mostly during the Mesozoic. To confirm this hypothesis, structural and basin evolution analysis, macrostructural Bouguer gravity anomaly analysis, detailed mapping and paleostress inversions have been used to prove the important role of strike slip deformation. In addition, we demonstrate that two main folding trends almost perpendicular (NE–SW to E–W and NW–SE) were simultaneously active in a wide transpressive zone. The two fold trends were generated by different mechanical behaviour, including buckling and bending under constrictive strain conditions. We propose that strain partitioning occurred with oblique compression and transpression during the Cenozoic.     

Tectonics and sedimentation in the Curitiba Basin, south of Brazil

The Curitiba Basin, Paraná, lies parallel to the west side of the Serra do Mar range and is part of a continental rift near the Atlantic coast of southeastern Brazil. It bears unconsolidated and poorly consolidated sediments divided in two formations: the lower Guabirotuba Formation and the overlying Tinguis Formation, both developed over Precambrian basement. Field observations, water well drill cores, and interpretations of satellite images lead to the inference that regional tectonic processes were responsible for the origin of the Basin in the continental rift context and for morphotecatonic evolution through block tilting, dissection, and erosion. The structural framework of the sediments and the basement is characterized by NE–SW-trending normal faults (extensional tectonic D₁ event) reactivated by NE–SW-trending strike–slip and reverse oblique faults (younger transtensional tectonic D_2′ to transpressional tectonic D_2″ event). This tectonic event, which started in the Paleogene and controlled the basin geometry, began as a halfgraben and was later reactivated as a pull-apart basin. D₂ is a neotectonic event that controls the current morphostructures. The Basin is connected to the structural rearrangement of the South American platform, which underwent a generalized extensional or trantensional process and, in late Oligocene, changed to a compressional to transpressional regime.     

Cenozoic post-collisional brittle tectonic history and stress reorientation in the High Zagros Belt (Iran, Fars Province)

The Zagros fold-and-thrust belt of SW-Iran is among the youngest continental collision zones on Earth. Collision is thought to have occurred in the late Oligocene–early Miocene, followed by continental shortening. The High Zagros Belt (HZB) presents a Neogene imbricate structure that has affected the thick sedimentary cover of the former Arabian continental passive margin. The HZB of interior Fars marks the innermost part of SE-Zagros, trending NW–SE, that is characterised by higher elevation, lack of seismicity, and no evident active crustal shortening with respect to the outer (SW) parts. This study examines the brittle structures that developed during the mountain building process to decipher the history of polyphase deformation and variations in compressive tectonic fields since the onset of collision. Analytic inversion techniques enabled us to determine and separate different brittle tectonic regimes in terms of stress tensors. Various strike–slip, compressional, and tensional stress regimes are thus identified with different stress fields. Brittle tectonic analyses were carried out to reconstruct possible geometrical relationships between different structures and to establish relative chronologies of corresponding stress fields, considering the folding process. Results indicate that in the studied area, the main fold and thrust structure developed in a general compressional stress regime with an average N032° direction of σ₁ stress axis during the Miocene. Strike–slip structures were generated under three successive strike–slip stress regimes with different σ₁ directions in the early Miocene (N053°), late Miocene–early Pliocene (N026°), and post-Pliocene (N002°), evolving from pre-fold to post-fold faulting. Tensional structures also developed as a function of the evolving stress regimes. Our reconstruction of stress fields suggests an anticlockwise reorientation of the horizontal σ₁ axis since the onset of collision and a significant change in vertical stress from σ₃ to σ₂ since the late stage of folding and thrusting. A late right-lateral reactivation was also observed on some pre-existing belt-parallel brittle structures, especially along the reverse fault systems, consistent with the recent N–S plate convergence. However, this feature was not reflected by large structures in the HZB of interior Fars. The results should not be extrapolated to the entire Zagros belt, where the deformation front has propagated from inner to outer zones during the younger events.     

Hierarchy of tectonic control on stratigraphic signatures: Base-level changes during the Early Permian in the Paraná Basin, southernmost Brazil

The Lower Permian sedimentary succession of the Paraná Basin in southernmost Brazil has an overall transgressive sedimentation regime, recorded by a clear retrogradation of the facies belt. However, important depositional strike-orientated variations and regional inversions occur in the sedimentation regime along the paleo-shoreline (i.e., along-strike) of the basin. At the regional scale, a huge source area was uplifted by the end of the Artinskian in the north and caused regression; the southern part of the study area increasingly was transgressed by the epicontinental sea (= regional inversion). This important tectonic overprint on the stratigraphic signature of the basin’s infill has a tectonic origin. The variable sedimentation regime along the paleo-shoreline is controlled by the structural framework of the basement, which is formed by several crustal blocks with different responses to tectonic strain induced by terrain accretion on the occidental margin of Gondwana during the Permian. Stratigraphic data indicate that during the Early Permian, there were at least two differential subsidence and uplift events, one by the end of the Sakmarian–Artinskian and another during the Late Artinskian–Kungurian.     

U–Pb geochronology of the southern Brasília belt (SE-Brazil): sedimentary provenance, Neoproterozoic orogeny and assembly of West Gondwana

The Brasília belt borders the western margin of the São Francisco Craton and records the history of ocean opening and closing related to the formation of West Gondwana. This study reports new U–Pb data from the southern sector of the belt in order to provide temporal limits for the deposition and ages of provenance of sediments accumulated in passive margin successions around the south and southwestern margins of the São Francisco Craton, and date the orogenic events leading to the amalgamation of West Gondwana.Ages of detrital zircons (by ID–TIMS and LA-MC-ICPMS) were obtained from metasedimentary units of the passive margin of the São Francisco Craton from the main tectonic domains of the belt: the internal allochthons (Araxá Group in the Áraxá and Passos Nappes), the external allochthons (Canastra Group, Serra da Boa Esperança Metasedimentary Sequence and Andrelândia Group) and the autochthonous or Cratonic Domain (Andrelândia Group). The patterns of provenance ages for these units are uniform and are characterised as follows: Archean–Paleoproterozoic ages (3.4–3.3, 3.1–2.7, and 2.5–2.4 Ga); Paleoproterozoic ages attributed to the Transamazonian event (2.3–1.9 Ga, with a peak at ca. 2.15 Ga) and to the ca. 1.75 Ga Espinhaço rifting of the São Francisco Craton; ages between 1.6 and 1.2 Ga, with a peak at 1.3 Ga, revealing an unexpected variety of Mesoproterozoic sources, still undetected in the São Francisco Craton; and ages between 0.9 and 1.0 Ga related to the rifting event that led to the individualisation of the São Francisco paleo-continent and formation of its passive margins. An amphibolite intercalation in the Araxá Group yields a rutile age of ca. 0.9 Ga and documents the occurrence of mafic magmatism coeval with sedimentation in the marginal basin.Detrital zircons from the autochthonous and parautochthonous Andrelândia Group, deposited on the southern margin of the São Francisco Craton, yielded a provenance pattern similar to that of the allochthonous units. This result implies that 1.6–1.2 Ga source rocks must be present in the São Francisco Craton. They could be located either in the cratonic area, which is mostly covered by the Neoproterozoic epicontinental deposits of the Bambuí Group, or in the outer paleo-continental margin, buried under the allochthonous units of the Brasília belt.Crustal melting and generation of syntectonic crustal granites and migmatisation at ca. 630 Ma mark the orogenic event that started with westward subduction of the São Francisco plate and ended with continental collision against the Paraná block (and Goiás terrane). Continuing collision led to the exhumation and cooling of the Araxá and Passos metamorphic nappes, as indicated by monazite ages of ca. 605 Ma and mark the final stages of tectonometamorphic activity in the southern Brasília belt.Whilst continent–continent collision was proceeding on the western margin of the São Francisco Craton along the southern Brasília belt, eastward subduction in the East was generating the 634–599 Ma Rio Negro magmatic arc which collided with the eastern São Francisco margin at 595–560 Ma, much later than in the Brasília belt. Thus, the tectonic effects of the Ribeira belt reached the southernmost sector of the Brasília belt creating a zone of superposition. The thermal front of this event affected the proximal Andrelândia Group at ca. 588 Ma, as indicated by monazite age.The participation of the Amazonian craton in the assembly of western Gondwana occurred at 545–500 Ma in the Paraguay belt and ca. 500 Ma in the Araguaia belt. This, together with the results presented in this work lead to the conclusion that the collision between the Paraná block and Goiás terrane with the São Francisco Craton along the Brasília belt preceded the accretion of the Amazonian craton by 50–100 million years.     

Tectonic analysis of an oceanic transform fault zone based on fault-slip data and earthquake focal mechanisms: the Húsavík–Flatey Fault zone, Iceland

The Húsavík–Flatey Fault (HFF) is an oblique dextral transform fault, part of the Tjörnes Fracture Zone (TFZ), that connects the North Volcanic Zone of Iceland and the Kolbeinsey Ridge. We carry out stress inversion to reconstruct the paleostress fields and present-day stress fields along the Húsavík–Flatey Fault, analysing 2700 brittle tectonic data measured on the field and about 700 earthquake focal mechanisms calculated by the Icelandic Meteorological Office. This allows us to discuss the Latest Cenozoic finite deformations (from the tectonic data) as well as the present-day deformations (from the earthquake mechanisms). In both these cases, different tectonic groups are reconstructed and each of them includes several distinct stress states characterised by normal or strike-slip faulting. The stress states of a same tectonic group are related through stress permutations (σ₁−σ₂ and σ₂−σ₃ permutations as well as σ₁−σ₃ reversals). They do not reflect separate tectonic episodes. The tectonic groups derived from the geological data and the earthquake data have striking similarity and are considered to be related. The obliquity of the Húsavík–Flatey Fault implies geometric accommodation in the transform zone, resulting mainly from a dextral transtension along an ENE–WSW trend. This overall mechanism is subject to slip partitioning into two stress states: a Húsavík–Flatey Fault-perpendicular, NE–SW trending extension and a Húsavík–Flatey Fault-parallel, NW–SE trending extension. These three regimes occur in various local tectonic successions and not as a regional definite succession of tectonic events. The largest magnitude earthquakes reveal a regional stress field tightly related to the transform motion, whereas the lowest magnitude earthquakes depend on the local stress fields. The field data also reveal an early extension trending similar to the spreading vector. The focal mechanism data do not reflect this extension, which occurred earlier in the evolution of the HFF and is interpreted as a stage of structural development dominated by the rifting process.     

3-D electromagnetic imaging of a Palaeozoic plate-tectonic boundary segment in SW Iberian Variscides (S Alentejo, Portugal)

In SW Iberian Variscides, the boundary between the South Portuguese Zone (SPZ) and the Ossa Morena Zone (OMZ) corresponds to a major tectonic suture that includes the Beja Acebuches Ophiolite Complex (BAOC) and the Pulo do Lobo Antiform Terrane (PLAT). Three sub-parallel and approximately equidistant MT profiles were performed, covering a critical area of this Palaeozoic plate-tectonic boundary in Portugal; the profiles, running roughly along an NE–SW direction, are sub-perpendicular to the main Variscan tectonic features. Results of the three-dimensional (3-D) modelling of MT data allow to generate, for the first time, a 3-D electromagnetic imaging of the OMZ–SPZ boundary, which reveals different conductive and resistive domains that display morphological variations in depth and are intersected by two major sub-vertical corridors; these corridors coincide roughly with the NE–SW, Messejana strike–slip fault zone and with the WNW–ESE, Ferreira–Ficalho thrust fault zone. The distribution of the shallow resistive domains is consistent with the lithological and structural features observed and mapped, integrating the expected electrical features produced by igneous intrusions and metamorphic sequences of variable nature and age. The development in depth of these resistive domains suggests that: (1) a significant vertical displacement along an early tectonic structure, subsequently re-taken by the Messejana fault-zone in Late-Variscan times, has to be considered to explain differences in deepness of the base of the Precambrian–Cambrian metamorphic pile; (2) hidden, syn- to late-collision igneous bodies intrude the meta-sedimentary sequences of PLAT; (3) the roots of BAOC are inferred from 12 km depth onwards, forming a moderate resistive band located between two middle-crust conductive layers extended to the north (in OMZ) and to the south (in SPZ). These conductive layers overlap the Iberian Reflective Body (evidenced by the available seismic reflection data) and are interpreted as part of an important middle-crust décollement developed immediately above or coinciding with the top of a graphite-bearing granulitic basement.     

Neotectonic evolution of the Central Betic Cordilleras (Southern Spain)

Paleostress orientations were calculated from fault-slip data of 36 sites located along a traverse through the Central Betic Cordilleras (southern Spain). Heterogeneous fault sets, which are frequent in the area, have been divided into homogeneous subsets by cross-cutting relationships observed in the field and by a paleostress stratigraphy approach applied on each individual fault population. The state of stress was sorted according to main tectonic events and a new chronology is presented of the Miocene to Recent deformation in the central part of the Betic Cordilleras. The deviatoric stress tensors fall into four distinct groups that are regionally consistent and correlate with three Late Oligocene–Aquitanian to Recent major tectonic events in the Betic Cordilleras. The new chronology of the neotectonic evolution includes, from oldest to youngest, the following main tectonic phases:

(1) Late Oligocene–Aquitanian to Early Tortonian: σ₁ subhorizontal N–S, partly E–W directed, σ₃ subvertical; compressional structures (thrusting of nappes, large-scale folding) and strike-slip faulting in the Alborán Domain and the External Zone of the Betic Cordilleras;

(2) Early Tortonian to Pliocene–Pleistocene: σ₁ subvertical, σ₃ subhorizontal NW–SE, partly N–S directed or E–W-directed (radial extension); large-scale normal faulting in the Central Betic Cordilleras and in the oldest Neogene formations of the Granada Basin related to the gravitational collapse of the Betic Cordilleras and the exhumation of the intensely metamorphosed rock series of the Internal Zones, at the same time formation of the Alborán Basin and intramontane basins such as the Granada Basin;

(3) Pleistocene to Recent: (3a) σ₁ subvertical, σ₃ subhorizontal NE–SW with prominent normal faulting, but coevally; (3b) σ₁ subhorizontal NW directed, σ₃ NE–SW subhorizontal with strike-slip faulting. Extensional structures and strike-slip faulting are related to the ongoing convergence of the Eurasian and African Plates and coeval uplift of the Betic Cordilleras. Reactivation of pre-existing fractures and faults was frequently observed. Phase 3 is interpreted as periodic strike-slip and normal faulting events due to a permutation of the principal stress axes, mainly σ₁ and σ₂.

Cenozoic Vertical-Axis Rotations of the Hoh Xil Basin, Central–Northern Tibet

Understanding the Cenozoic vertical-axis rotation in the Tibetan Plateau is crucial for continental dynamic evolution. Paleomagnetic and rock magnetic investigations were carried out for the Oligocene and Miocene continental rocks of the Hoh Xil basin in order to better understand the tectonic rotations of central Tibet. The study area was located in the Tongtianhe area located in the southern part of the Hoh Xil basin and northern margin of the Tanggula thrust system in central-northern Tibet. A total of 160 independently oriented paleomagnetic samples were drilled from the Tongtianhe section for this study. The magnetic properties of magnetite and hematite have been recognized by measurements of magnetic susceptibility vs. temperature curves and unblocking temperatures. The mean directions of the Oligocene Yaxicuo Group in stratigraphic coordinates(Declination/Inclination = 354.9°/29.3°, k = 33.0, α_(95) = 13.5°, N =5 Sites) and of the Miocene Wudaoliang Group in stratigraphic coordinates(Declination/Inclination = 3.6°/36.4°, k = 161.0, α_(95) = 9.7°, N =3 Sites) pass reversal tests, indicating the primary nature of the characteristic magnetizations. Our results suggested that the sampled areas in the Tuotuohe depression of the Hoh Xil basin have undergone no paleomagnetically detectable rotations under single thrusting from the Tanggula thrust system. Our findings, together with constraints from other tectonic characteristics reported by previous paleomagnetic studies, suggest tectonic rotations in the Cuoredejia and Wudaoliang depressions of the Hoh Xil basin were affected by strike-slip faulting of the Fenghuo Shan-Nangqian thrust systems. A closer examination of geological data and different vertical-axis rotation magnitudes suggest the tectonic history of the Hoh Xil basin may be controlled by thrust and strike-slip faulting since the Eocene.     

Pan-African strike–slip tectonics in eastern Cameroon—Magnetic fabrics (AMS) and structure in the Lom basin and its gneissic basement

Field, microstructural, and anisotropy of magnetic susceptibility (AMS) or magnetic fabric studies were applied to identify the sequence and character of the Pan-African structures in the basement of Eastern Cameroon at both sides of the regional scale Bétaré-Oya Shear Zone (BOSZ). The NE-SW trending BOSZ separates older gneisses and migmatites towards SE (domain I) from the younger rocks of the Lom meta-volcano-sedimentary basin towards NW (domain II). In domain I, early, ductile compressional deformation occurred in two events, D1 and D2, under relatively high T conditions. During subsequent cooling, strain partitioned between the competent basement gneisses with only mild compression and the bordering shear zone (BOSZ) with intense simple shear-wrenching (D3). Strain in the less competent rocks of domain II is dominated by simple shear, strike-slip wrenching (D3), with an earlier stage of compressional deformation preserved only in some low strain pods.Magnetic fabrics (AMS) document a progressive change from oblate ellipsoids towards prolate ellipsoids in domain I, when proceeding from the south towards the BOSZ. Foliations are mostly steep but define a girdle with a pole plunging gently towards WSW. The magnetic lineations also plunge mostly towards WSW at shallow angles. These fabrics indicate a compression approximately normal to the BOSZ, which is also the SE margin of the Lom Basin. In the Lom metasediments (domain II), AMS ellipsoids are typically oblate. Foliations trend NE-SW with mostly steep dips. Magnetic lineations plunge gently NE or SW. This fabric with foliations mostly steep and subparallel with the major BOSZ, combined with generally subhorizontal lineations implies the BOSZ as a Pan-African strike–slip shear zone with a subordinate component of compression.At a larger scale, the area is part of a continent-scale shear zone, separating external Pan-African domains of compression along the northern margin of the Congo craton from internal domains dominated by high-angle strike–slip and transpressional deformation. Together with published data, the present study thus demonstrates that transpression is a regional phenomenon in the Pan-African orogen of central and eastern Cameroon.     

Late Tertiary–Quaternary tectonics of the Southern Apennines (Italy): New evidences from the Tyrrhenian slope

This paper summarises the results of combined structural and geomorphological investigations we carried out in two key areas, in order to obtain new data on the structure and evolution of the Tyrrhenian slope of the southern Apennines. Analysis by a stress inversion method [Angelier, J., 1994. Fault slip analysis and paleostress reconstruction. In: Continental Deformation. P.L. Hancock Ed., Pergamon Press, Oxford, 53–100] of fault slip data from Mesozoic to Quaternary formations allowed the reconstruction of states of stress at different time intervals. By integrating these data with those deriving from the stratigraphic and morphotectonic records, chronology and timing of the sequence of the deformation events was obtained.The tectonic history of the region can be related to four deformation events. Structures related to the first event, that was dominated by a strike-slip regime with a NW–SE oriented σ1 and was active since Mid–Late Miocene, do not significantly affect the present day landscape, as they were strongly displaced and overprinted by subsequent deformation events and/or deleted by erosion. The second and third events, that may be considered as the main responsible for the morphostructural signature of the region, are comparable with the stretching phases recognised offshore and considered to be responsible for the opening and widening of the Tyrrhenian basin. In particular, the second event (with an E–W oriented σ3), took place in the Late Miocene/earliest Pliocene and was first dominated by a strike-slip regime, that was also responsible for thrusting and folding. Since Late Pliocene, it was dominated by an extensional regime that created large vertical offsets along N–S to NW–SE trending faults. The third event, that was dominated by extension with a NW–SE oriented σ3, started in the Early Pleistocene and was responsible for formation of the horst-and-graben structure with NE–SW trend that characterises the Tyrrhenian margin of the southern Apennines. The fourth deformation event, which is characterised by an extensional regime with a NE–SW trending σ3, started in the late Middle Pleistocene and is currently active.     

Stress tensor analysis of the 1998–1999 tectonic swarm of northern Quito related to the volcanic swarm of Guagua Pichincha volcano, Ecuador

The phreatic activity and the subsequent dacitic dome growth in 1998–1999 at Guagua Pichincha volcano, Ecuador, were associated with two seismic swarms: one located in the northern part of Quito (population: 1,500,000) and another one, just below the active volcano, about 15–20 km SW from the first one. Quito swarm tectonic events have high frequencies (from 1 to 10–15 Hz). We registered more than 3200 events (among which 2354 events of 1.4≤M_L≤4.2) between June 1998 and December 1999 at the −2- and −17-km depth. The volcanic events below the Guagua Pichincha caldera have high (from 1 to 10–15 Hz) and low (less than 3 Hz) frequencies. Approximately, 130,000 events were registered between September 1998 and December 1999 at the +2.4- and −3.5-km depth. Here, we study the stress tensors of these two swarms deduced from the polarities of P first motions and compare them to the regional stress tensor deduced from CMT Harvard focal mechanisms. The Quito swarm stress tensor is relatively close to the regional stress tensor (the σ₁ axis was oriented N117°E close to the N102°E direction of the plate motion found by the GPS measurement, and σ₃ is nearly vertical). The difference may be due to the action of the closely active Guagua Pichincha volcano. The Guagua Pichincha stress tensor is very different from the regional tectonic one. The σ₁ axis of the volcano is oriented N214°E, almost perpendicular to the σ₁ of the swarm of Quito and σ₃ is almost horizontal. Even if these two tensors are different, they can be explained in a more general tectonic scheme. The almost horizontal direction of σ₃ just below the volcano is compatible with an extensional horizontal direction that may be expected in the shallow extrados part of a compressional region and consistent with an opening of the top of the Guagua Pichincha volcano. The movement of the fluids (magma, gas and/or groundwater) produced by the closely active Guagua Pichincha volcano seems to have an influence in the acceleration of the generation of seismic events.     

Metamorphic path constrained by metapelitic rocks from the inner Aiuruoca-Andrelândia nappe, south of the São Francisco craton, SE Brazil

A Nappe system south to southwest of the São Francisco Craton represents the southern extension of the Brasília belt and describes an inverted metamorphic pile of greenschist facies toward amphibolite facies. The Aiuruoca-Andrelândia nappe is one of the nappes of this system. The hind portion of the Aiuruoca-Andrelândia nappe, south of Caxambu and Aiuruoca (MG), consists of a structural-metamorphic domain transported toward the E-NE. There is a metamorphic transition, from the kyanite zone to kyanite and sillimanite coexistence, until the sillimanite zone. Metapelitic rocks preserve high-pressure parageneses (Rt–Ky–Grt–Ms–Bt–Pl–Qtz) and contain retrograde eclogitic rocks. Sil–Pl–Qtz coronitic intergrowths around garnets are common decompressive textures. Kyanite schists register the P_max of 11 kbar at 660 °C and define a decompressive path until 6–7.5 kbar at 650 °C. These P–T conditions represent the equilibrium in S₂ schistosity (amphibolite facies) and the beginning of the cooling path in the Ky–Sil transition. The decompressive path suggests an extrusional process, immediately after burying at about 60 km. Exhumation controlled by convergent events, related to the São Francisco Plate subduction and tectonic erosion, took these units, isothermally, to higher levels (20–33 km). Later, the metamorphic path shifted toward near-isobaric cooling.     

Kinematic analysis of mélange fabrics: examples and applications from the McHugh Complex, Kenai Peninsula, Alaska

Permian to Cretaceous mélange of the McHugh Complex on the Kenai Peninsula, south-central Alaska includes blocks and belts of graywacke, argillite, limestone, chert, basalt, gabbro, and ultramafic rocks, intruded by a variety of igneous rocks. An oceanic plate stratigraphy is repeated hundreds of times across the map area, but most structures at the outcrop scale extend lithological layering. Strong rheological units occur as blocks within a matrix that flowed around the competent blocks during deformation, forming broken formation and mélange. Deformation was noncoaxial, and disruption of primary layering was a consequence of general strain driven by plate convergence in a relatively narrow zone between the overriding accretionary wedge and the downgoing, generally thinly sedimented oceanic plate. Soft-sediment deformation processes do not appear to have played a major role in the formation of the mélange. A model for deformation at the toe of the wedge is proposed in which layers oriented at low angles to σ₁ are contracted in both the brittle and ductile regimes, layers at 30–45° to σ₁ are extended in the brittle regime and contracted in the ductile regime, and layers at angles greater than 45° to σ₁ are extended in both the brittle and ductile regimes. Imbrication in thrust duplexes occurs at deeper levels within the wedge. Many structures within mélange of the McHugh Complex are asymmetric and record kinematic information consistent with the inferred structural setting in an accretionary wedge. A displacement field for the McHugh Complex on the lower Kenai Peninsula includes three belts: an inboard belt of Late Triassic rocks records west-to-east-directed slip of hanging walls, a central belt of predominantly Early Jurassic rocks records north–south directed displacements, and Early Cretaceous rocks in an outboard belt preserve southwest–northeast directed slip vectors. Although precise ages of accretion are unknown, slip directions are compatible with inferred plate motions during the general time frame of accretion of the McHugh Complex. The slip vectors are interpreted to preserve the convergence directions between the overriding and underriding plates, which became more oblique with time. They are not considered indicative of strain partitioning into belts of orogen-parallel and orogen-perpendicular displacements, because the kinematic data are derived from the earliest preserved structures, whereas fabrics related to strain partitioning would be expected to be superimposed on earlier accretion-related fabrics.     

Collision leading to multiple-stage large-scale extrusion in the Qinling orogen: Insights from the Mianlue suture

The geologic framework of the Phanerozoic Qinling–Dabie orogen was built up through two major suturing events of three blocks. From north to south these include the North China craton (including the north Qinling block), the Qinling–Dabie microblock, and the South China craton (including the Bikou block), separated by the Shangdan and Mianlue sutures. The Mianlue suture zone contains evidence for Mesozoic extrusion tectonics in the form of major strike–slip border faults surrounding basement blocks, a Late Paleozoic ophiolite and a ca. 240–200 Ma thrust belt that reformed by 200–150 Ma thrusts during A-type (intracontinental) subduction. The regional map pattern shows that the blocks are surrounded by complexly deformed Devonian to Early Triassic metasandstones and metapelites, forming a regional-scale block-in-matrix mélange fabric. Five distinct tectonic units have been recognized in the belt: (1) basement blocks including two types of Precambrian basement, crystalline and transitional; (2) continental margin slices including Early Paleozoic strata, and Late Paleozoic fluviodeltaic sedimentary rocks, proximal and distal fan clastics, reflecting the development of a north-facing rift margin on the edge of the South China plate; (3) out of sequence oceanic crustal slices including strongly deformed postrift, deep-water sedimentary rocks, sheeted dikes, basalts, and mafic–ultramafic cumulates of a Late Paleozoic ophiolite suite, developing independent of the rift margin in a separate basin; (4) out-of-sequence island-arc slices; (5) accretionary wedge slices. All the tectonic units were deformed during three geometrically distinct deformation episodes (D₁, D₂ and D₃ during 240–200 Ma). Units 2–4 involved southward thrusting and vertical then southward extrusion of about 20 km of horizontal displacement above the autochthonous basement during the D₁ episode. Thrust slices 20 km south of the Mianlue suture are related to this vertical extrusion due to the same rock assemblages, ages and kinematics. The D₂ and D₃ episodes folded all the units in a thick-skinned style about east–west (D₂) and west–northwest (D₃) axes in the Mianlue suture zone. An early foreland propagating sequence of accretion of Late Paleozoic rocks deposited above the Yangtze craton is not involved in D₁ deformation but is temporally equivalent to the D₂ and D₃ deformation in the Mianlue suture. Two stages of strike–slip faulting mainly occurred at the end of D₂ and D₃, respectively. During D₂ deformation, the Bikou block was obliquely indented to the ESE into the Mianlue suture, rather than being thrust over the Mianlue suture from the north as a part of the Qinling–Dabie microblock. During D₃ deformation, however, the Bikou block was bounded by the south boundary fault of the Mianlue suture, and the Yangpingguan fault on the south. These faults are coeval strike–slip faults, but of opposite senses, and accommodated minor southwestward extrusion of the Bikou block into Songpan–Ganze orogen. The other basement blocks north of the Mianlue suture were extruded eastward by about 20 km of lateral displacement, based on the offset of the Wudang dome, during the D₃ episode due to the northeastward indentation of the Hannan complex of the South China craton. Post-D₃ emplacement of granite, cutting across the strike–slip faults such as the Mianlue suture, provides a minimum age of 200 Ma for D₃ deformation. Therefore, based on insights from the evolution of the Mianlue suture, the D₂ and D₃ episodes in the Mianlue suture and its neighbors are not responsible for and associated with the two-stage extrusion of the Dabie UHP-HP terranes from the Foping dome to the present erosional surface (more than 350 km).     

Imaging the ramp–décollement geometry of the Chelungpu fault using coseismic GPS displacements from the 1999 Chi-Chi, Taiwan earthquake

We use coseismic GPS data from the 1999 Chi-Chi, Taiwan earthquake to estimate the subsurface shape of the Chelungpu fault that ruptured during the earthquake. Studies prior to the earthquake suggest a ramp–décollement geometry for the Chelungpu fault, yet many finite source inversions using GPS and seismic data assume slip occurred on the down-dip extension of the Chelungpu ramp, rather than on a sub-horizontal décollement. We test whether slip occurred on the décollement or the down-dip extension of the ramp using well-established methods of inverting GPS data for geometry and slip on faults represented as elastic dislocations. We find that a significant portion of the coseismic slip did indeed occur on a sub-horizontal décollement located at 8 km depth. The slip on the décollement contributes 21% of the total modeled moment release. We estimate the fault geometry assuming several different models for the distribution of elastic properties in the earth: homogeneous, layered, and layered with lateral material contrast across the fault. It is shown, however, that heterogeneity has little influence on our estimated fault geometry. We also investigate several competing interpretations of deformation within the E/W trending rupture zone at the northern end of the 1999 ground ruptures. We demonstrate that the GPS data require a 22- to 35-km-long lateral ramp at the northern end, contradicting other investigations that propose deformation is concentrated within 10 km of the Chelungpu fault. Lastly, we propose a simple tectonic model for the development of the lateral ramp.     

Geometry of the fault zone of the 2003 Ms = 7.5 Chuya earthquake and associated stress fields, Gorny Altai

The co-seismic deformations produced during the September 27, 2003 Chuya earthquake (Ms = 7.5) that affected the Gorny Altai, Russia, are described and discussed along a 30 km long segment. The co-seismic deformations have manifested themselves both in unconsolidated sediments as R- and R′-shears, extension fractures and contraction structures, and in bedrock as the reactivation of preexisting schistosity zones and individual fractures, as well as development of new ruptures and coarse crushing zones. It has been established that the pattern of earthquake ruptures represents a typical fault zone trending NW–SE with a width reaching 4–5 km and a dextral strike–slip kinematics. The initial stress field that produced the whole structural pattern of co-seismic deformations during the Chuya earthquake, is associated with a transcurrent regime with a NNW–SSE, almost N–S, trending of compressional stress axis (σ₁), and a ENE–WSW, almost E–W, trending of tensional stress axis (σ₃). The state of stress in the newly-formed fault zone is relatively uniform. The local stress variations are expressed in insignificant deviation of σ₁ from N–S to NW–SE or NE–SW, in short-term fluctuations of relative stress values in keeping their spatial orientations, or in a local increase of the plunge angle of the σ₁. The geometry of the fault zone associated with the Chuya earthquake has been compared with the mechanical model of fracturing in large continental fault zones with dextral strike–slip kinematics. It is apparent that the observed fracture pattern corresponds to the late disjunctive stage of faulting when the master fault is not fully developed but its segments are already clearly defined. It has been shown that fracturing in widely different rocks follows the common laws of the deformation of solid bodies, even close to the Earth surface, and with high rates of movements.     

Four-dimensional transform fault processes: progressive evolution of step-overs and bends

Many bends or step-overs along strike–slip faults may evolve by propagation of the strike–slip fault on one side of the structure and progressive shut-off of the strike–slip fault on the other side. In such a process, new transverse structures form, and the bend or step-over region migrates with respect to materials that were once affected by it. This process is the progressive asymmetric development of a strike–slip duplex. Consequences of this type of step-over evolution include: (1) the amount of structural relief in the restraining step-over or bend region is less than expected; (2) pull-apart basin deposits are left outside of the active basin; and (3) local tectonic inversion occurs that is not linked to regional plate boundary kinematic changes. This type of evolution of step-overs and bends may be common along the dextral San Andreas fault system of California; we present evidence at different scales for the evolution of bends and step-overs along this fault system. Examples of pull-apart basin deposits related to migrating releasing (right) bends or step-overs are the Plio-Pleistocene Merced Formation (tens of km along strike), the Pleistocene Olema Creek Formation (several km along strike) along the San Andreas fault in the San Francisco Bay area, and an inverted colluvial graben exposed in a paleoseismic trench across the Miller Creek fault (meters to tens of meters along strike) in the eastern San Francisco Bay area. Examples of migrating restraining bends or step-overs include the transfer of slip from the Calaveras to Hayward fault, and the Greenville to the Concord fault (ten km or more along strike), the offshore San Gregorio fold and thrust belt (40 km along strike), and the progressive transfer of slip from the eastern faults of the San Andreas system to the migrating Mendocino triple junction (over 150 km along strike). Similar 4D evolution may characterize the evolution of other regions in the world, including the Dead Sea pull-apart, the Gulf of Paria pull-apart basin of northern Venezuela, and the Hanmer and Dagg basins of New Zealand.