Microwave‐assisted rapid polycondensation reaction of 4‐(4′‐acetamidophenyl)‐1,2,4‐triazolidine‐3,5‐dione with diisocyanates

4‐(4′‐Aminophenyl)‐1,2,4‐triazolidine‐3,5‐dione was reacted with 1 mol of acetyl chloride in dry N,N‐dimethylacetamide (DMAc) at ?15°C and 4‐(4′‐acetamidophenyl)‐1,2,4‐triazolidine‐3,5‐dione [4‐(4′‐acetanilido)‐1,2,4‐triazolidine‐3,5‐dione] (APTD) was obtained in high yield. The reaction of the APTD monomer with excess n‐isopropylisocyanate was performed at room temperature in DMAc solution. The resulting bis‐urea derivative was obtained in high yield and was finally used as a model for the polymerization reaction. The step‐growth polymerization reactions of monomer APTD with hexamethylene diisocyanate, isophorone diisocyanate, and tolylene‐2,4‐diisocyanate were performed under microwave irradiation and solution polymerization in the presence of pyridine, triethylamine, or dibutyltin dilaurate as a catalyst. Polycondensation proceeded rapidly, compared with conventional solution polycondensation; it was almost completed within 8 min. The resulting novel polyureas had an inherent viscosity in the range of 0.07–0.17 dL/g in dimethylformamide or sulfuric acid at 25°C. These polyureas were characterized by IR, ¹H‐NMR, elemental analysis, and thermogravimetric analysis. The physical properties and structural characterization of these novel polyureas are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 91: 2103–2113, 2004     

Synthesis of novel azo‐containing polyureas derived from 4‐[4′‐(2‐hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione

4‐[4′‐(2‐Hydroxy‐1‐naphthylazo)phenyl]‐1,2,4‐triazolidine‐3,5‐dione ( HNAPTD ) ( 1 ) has been reacted with excess amount of n‐propylisocyanate in DMF (N,N‐dimethylformamide) solution at room temperature. The reaction proceeded with high yield, and involved reaction of both N? H of the urazole group. The resulting bis‐urea derivative 2 was characterized by IR, ¹H‐NMR, elemental analysis, UV‐Vis spectra, and it was finally used as a model compound for the polymerization reaction. Solution polycondensation reactions of monomer 1 with Hexamethylene diisocyanate ( HMDI ) and isophorone diisocyanate ( IPDI ) were performed in DMF in the presence of pyridine as a catalyst and lead to the formation of novel aliphatic azo‐containing polyurea dyes, which are soluble in polar solvents. The polymerization reaction with tolylene‐2,4‐diisocyanate ( TDI ) gave novel aromatic polyurea dye, which is insoluble in most organic solvents. These novel polyureas have inherent viscosities in a range of 0.15–0.22 g dL^?1 in DMF at 25°C. Some structural characterization and physical properties of these novel polymers are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 3177–3183, 2001     

Preparation and characterization of new photoactive polyamides containing 4‐(4‐dimethylaminophenyl)urazole units

4‐(4‐dimethylaminophenyl)‐1,2,4‐triazolidine‐3,5‐dione ( DAPTD ) was prepared from 4‐dimethylaminobenzoic acid in five steps. The compound DAPTD was reacted with excess acetyl chloride in N,N‐dimethylacetamide (DMAc) solution and gave 1,2‐bisacetyl‐4‐[4‐(dimethylaminophenyl)]‐1,2,4‐triazolidine‐3,5‐dione as a model compound. Solution polycondensation reactions of monomer with succinyl chloride (SucC), suberoyl chloride (SubC), and sebacoyl chloride (SebC) were performed under conventional solution polymerization techniques in the presence of triethylamine and pyridine as a catalyst in N‐methylpyrrolidone (NMP) and led to the formation of novel aliphatic polyamides. These novel polyamides have inherent viscosities in the range of 0.09–0.21 dL/g in N,N‐dimethylformamide (DMF) at 25°C. Fluorimetric studies of the model compound as well as polymers were performed. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 947–954, 2007     

Chromophoric poly(urea‐urethane)s with pendent 3‐hydroxynaphthalene group: Synthesis and characterization

The reaction of 4‐(3‐hydroxynaphthalene)‐1,2,4‐triazolidine‐3,5‐dione ( 3HNTD ) with n‐propylisocyanate was performed at different molar ratios. The resulting monosubstituted urea and disubstituted urea‐urethane derivatives were obtained in high yields and were used as model compounds for polymerization reactions. 3HNTD as a monomer was used in the preparation of heterocyclic poly(urea‐urethane)s to produce photoactive polymers, by polycondensation with different diisocyanates in N,N‐dimethylacetamide (DMAc) solution. Chromophoric heterocyclic polymers containing naphthalene group, obtained in quantitative yields, possessed inherent viscosities in the range of 0.14–0.38 dL/g. The resulting poly(urea‐urethane)s is insoluble in most organic solvents, but easily soluble in polar solvents such as dimethyl sulfoxide (DMSO), DMAc, and N‐methylpyrrolidone (NMP). The polymers were characterized by IR, ¹H‐NMR, elemental analysis, and TGA. Fluorimetric and UV–vis studies of the monomer as well as polymers were performed. © 2008 Wiley Periodicals, Inc. J Appl Polym Sci, 2008     

Synthesis and characterization of new polyureas based on 4‐(4′‐aminophenyl)urazole and various diisocyanates

4‐(4′‐Aminophenyl)urazole (AmPU) was prepared from 4‐nitrobenzoic acid in six steps. The reaction of monomer AmPU with n‐isopropylisocyanate was performed in N,N‐dimethylacetamide solutions at different ratios, and the resulting disubstituted and trisubstituted urea derivatives were obtained in high yields and were finally used as models for polymerization reactions. The step‐growth polymerization reactions of AmPU with hexamethylene diisocyanate, isophorone diisocyanate, and toluene‐2,4‐diisocyanate were performed in N‐methylpyrrolidone solutions in the presence of pyridine as a catalyst. The resulting novel polyureas had inherent viscosities of 0.11–0.18 dL/g in dimethylformamide at 25°C. These polyureas were characterized with IR, ¹H‐NMR, elemental analysis, and thermogravimetric analysis. Some physical properties and structural characterization of these novel polyureas are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 2692–2700, 2003     

Synthesis and characterization of new polyureas derived from 4‐(4′‐Methoxyphenyl)urazole

4‐(4′‐Methoxyphenyl)urazole (MPU) was prepared from 4‐methoxybenzoic acid in five steps. The reaction of monomer MPU with n‐isopropylisocyanate was performed at room temperature in N,N‐dimethylformamide solution, and the resulting bis‐urea derivative was obtained in high yield and was finally used as a model for polymerization reaction. The step‐growth polymerization reactions of monomer MPU with hexamethylene diioscyanate, isophorone diioscyanate, and toluene‐2,4‐diioscyanate were performed in N,N‐dimethylacetamide solution in the presence of pyridine as a catalyst. The resulting novel polyureas have an inherent viscosity (η_inh) in a range of 0.07–0.21 dL/g in DMF and sulfuric acid at 25°C. These polyureas were characterized by IR, ¹H‐NMR, elemental analysis, and TGA. Some physical properties and structural characterization of these novel polyureas are reported. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 85: 1141–1146, 2002     

Synthesis of new polyureas derived from 4‐cyclohexylurazole

4‐Cyclohexylurazole (1) R = cyclohexyl (CHU) was prepared from cyclohexyl isocyanate in two steps. Polycondensation reactions of compound CHU with hexamethylene diisocyanate (HMDI), isophorone diisocyanate (IPDI), and toluene‐2,4‐diisocyanate (TDI) were performed in DMAc/chloroform and DMAC in the presence of pyridine as a catalyst. The resulting novel polyureas have an inherent viscosity in the range of 0.044–0.206 g/dL in DMF at 25°C. These polyureas were characterized by IR, ¹H–NMR, elemental analysis, and TGA. The resulting polymers are soluble in most organic solvents. Some physical properties and structural characterization of these novel polyureas are reported. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1335–1341, 2001     

Synthesis and characterization of novel polyureas based on benzimidazoline‐2‐one and benzimidazoline‐2‐thione hard segments

Six novel polyureas were prepared from benzimidazolin‐2‐one and benzimidazolin‐2‐thione, which acted as hard segments, with two aromatic diisocyanates (4,4′‐diphenylmethane diisocyanate and toluene 2,4‐diisocyanate) and one aliphatic diisocyanate (hexamethylene diisocyanate). The polymers that formed were fully characterized with Fourier transform infrared spectroscopy, ¹³C‐NMR cross‐polarization/magic‐angle spinning, differential scanning calorimetry, and thermogravimetry. X‐ray diffraction revealed that the polymers contained crystalline and amorphous regions that varied with the nature of the backbone structures. All the polyureas were insoluble in common organic solvents, and this made it difficult to investigate their solution properties. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 576–583, 2006     

Synthesis and properties of polyamides based on 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan

A new diamine 5,5′‐bis[4‐(4‐aminophenoxy)phenyl]‐hexahydro‐4,7‐methanoindan ( 3 ) was prepared through the nucleophilic displacement of 5,5′‐bis(4‐hydroxylphenyl)‐hexahydro‐4,7‐methanoindan ( 1 ) with p‐halonitrobenzene in the presence of K₂CO₃ in N,N‐dimethylformamide (DMF), followed by catalytic reduction with hydrazine and Pd/C in ethanol. A series of new polyamides were synthesized by the direct polycondensation of diamine 3 with various aromatic dicarboxylic acids. The polymers were obtained in quantitative yields with inherent viscosities of 0.76–1.02 dl g⁻¹. All the polymers were soluble in aprotic dipolar solvents such as N,N‐dimethylacetamide (DMAc) and N‐methyl‐2‐pyrrolidone (NMP), and could be solution cast into transparent, flexible and tough films. The glass transition temperatures of the polyamides were in the range 245–282 °C; their 10% weight loss temperatures were above 468 °C in nitrogen and above 465 °C in air. © 2000 Society of Chemical Industry     

Synthesis of novel polyimides containing side‐chain azo‐2‐naphthol moieties

An amine‐ester derivative of isoeugenol was prepared in three steps. This amine‐ester was converted to diazonium salt and subsequently was reacted with 2‐naphthol and a novel isoeugenol ester‐azo derivative as a new monomer was obtained in quantitative yield. This monomer was characterized by high‐field ¹H‐NMR, IR, and elemental analysis and then was used for the preparation of model compound and polymerization reactions. 4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione was allowed to react with this new monomer. The reaction was very fast and gave only one double adduct by Diels–Alder and ene pathways in excellent yield. The polymerization reactions of novel monomer with bistriazolinediones [bis(p‐3,5‐dioxo‐1,2,4‐triazolin‐4‐ylphenyl)methane and 1,6‐bis(3,5‐dioxo‐1,2,4‐triazolin‐4‐yl)hexane] were carried out in N,N‐dimethylacetamide at room temperature. The reactions were exothermic, fast, and gave novel heterocyclic polyimides by repetitive Diels–Alder‐ene polyaddition reactions. Some structural characterization and physical properties of these novel heterocyclic polyimides are reported. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1942–1951, 2003     

Synthesis of novel heterocyclic polyimides containing trimellitimide acid moieties

4‐Nitrobezoyl chloride (2) was reacted with isoeugenol in chloroform in the presence of triethyl amine and ester (4) was obtained in high yield. Ester (4) was reacted with SnCl₂·2H₂O to give amine‐ester (5), and subsequently was reacted with trimellitic anhydride (6) and novel isoeugenol ester‐imide derivative (7), as a new monomer was obtained in quantitative yield. Compound (7) was characterized by high‐field ¹H–NMR, IR, and elemental analysis and then was used for the preparation of model compound (9) and polymerization reactions. 4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione (PhTD) (8) was allowed to react with compound (7). The reaction is very fast and gives only one double adduct (9) via Diels–Alder and ene pathways in excellent yield. The polymerization reactions of novel monomer (7) with bistriazolinediones [bis(p‐3,5‐dioxo‐1,2,4‐triazolin‐4‐ylphenyl)methane (10) and 1,6‐bis(3,5‐dioxo‐1,2,4‐triazolin‐4‐yl)hexane (11)] were carried out in N,N‐dimethylacetamide (DMAc) at room temperature. The reactions are exothermic, fast, and gave novel heterocyclic polyimides (12) and (13) via repetitive Diels–Alder‐ene polyaddition reactions. Some structural characterization and physical properties of these novel heterocyclic polyimides are reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 1716–1725, 2001     

Synthesis and characterization of novel optically active and flame‐retardant heterocyclic polyimides

Tetrachlorophthalic anhydride (1) was reacted with L ‐leucine (2) in toluene solution at refluxing temperature in the presence of triethylamine and the resulting imide‐acid (4) was obtained in quantitative yield. The compound (4) was converted to the N‐(tetrachlorophthaloyl)‐L ‐leucine acid chloride (5) by reaction with thionyl chloride. The reaction of this acid chloride (5) with isoeugenol (6) was carried out in chloroform and novel optically active isoeugenol ester derivative (7) as a chiral monomer was obtained in high yield. The compound (7) was characterized by ¹H‐NMR, IR, Mass and elemental analysis, and then was used for the preparation of model compound (10) and polymerization reactions. 4‐Phenyl‐1,2,4‐triazoline‐3,5‐dione, PhTD (8) was allowed to react with compound (7). The reaction is very fast, and gives only one diastereomer of (10) via Diels–Alder and ene pathways in excellent yield. The polymerization reactions of novel monomer (7) with bistriazolinediones [bis‐(p‐3,5‐dioxo‐1,2,4‐triazolin‐4‐ylphenyl)methane (11) and 1,6‐bis‐(3,5‐dioxo‐1,2,4‐triazolin‐4‐yl)hexane] (12) were carried out in N,N‐dimethylacetamide (DMAc) at room temperature. The reactions are exothermic, fast, and give novel optically active polymers (13) and (14) via repetitive Diels–Alder‐ene polyaddition reactions. The resulting polymers are optically active, thermally stable, and flame resistant. All of the above compounds were fully characterized by IR, ¹H‐NMR, elemental analysis, and specific rotation. Some structural characterization and physical properties of these novel heterocyclic polyimides are reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 240–248, 2000     

Solid-State Polymerization of 4-(4-Dimethylaminophenyl)-urazole with Diisocyanates

In the present study, the solid-state thermal polymerization of 4-(4-dimethylaminophenyl)-1,2,4-triazolidine-3,5-dione (DAPTD) with diisocyanates such as hexamethylene diisocyanate, isophorone diisocyanate and toluylene-2,4-diisocyanate as a new method for synthesis of polyureas are described. The influence of reaction parameters, such as presence of catalyst in the starting material and ratio of DAPTD to diisocyanate were investigated. Polycondensation was successfully preceded without any solvent, which is used in conventional method. The resulting polyureas were obtained in high yields with inherent viscosities ranging from 0.14 to 0.25 dL/g. This method was also compared with two other polycondensation methods for the polymerization reactions which were reported before: conventional solution method and a method using tetrabutylammonium bromide as a molten ionic liquid media.     

Synthesis of Photoactive Polyureas Derived from 4-(4-Dimethylaminophenyl)-1,2,4-triazolidine-3,5-dione and Diisocyanates

Summary 4-(4-Dimethylaminophenyl)-1,2,4-triazolidine-3,5-dione (DAPTD) was prepared from 4-dimethylaminobenzoic acid in five steps. The reaction of monomer DAPTD with n-isopropylisocyanate was performed at room temperature in N,N-dimethylacetamide (DMAc) solution and the resulting bis-urea derivative was obtained in high yield and was finally used as a model compound for polymerization reaction. The step-growth polymerization reactions of monomer with hexamethylene diisocyanate (HMDI), isophorone diisocyanate (IPDI) and toluene-2,4-diisocyanate (TDI) were performed in DMAc solution in the presence of pyridine, triethylamine or dibutyltin dilurate as catalysts. Some physical properties and structural characterization of these novel polyureas are reported. Fluorimetric studies of the model compound as well as polymers were performed.     

Synthesis and characterization of novel heat resistance poly(amide‐imide)s from N,N′‐[2,5‐bis(4‐aminobenzylidene) cyclopentanone] bistrimellitimide acid and various aromatic diamines

A new‐type of dicarboxylic acid was synthesized from the reaction of 2,5‐bis(4‐aminobenzylidene)cyclopentanone with trimellitic anhydride in a solution of glacial acetic acid/pyridine (Py) at refluxing temperature. Six novel heat resistance poly(amide‐imide)s (PAIs) with good inherent viscosities were synthesized, from the direct polycondensation reaction of N,N′‐[2,5‐bis(4‐aminobenzylidene)cyclopentanone]bistrimellitimide acid with several aromatic diamines, by two different methods such as direct polycondensation in a medium consisting of N‐methyl‐2‐pyrrolidone (NMP)/triphenyl phosphite (TPP)/calcium chloride (CaCl₂)/pyridine (Py) and direct polycondensation in a p‐toluene sulfonyl chloride (tosyl chloride, TsCl)/pyridine (Py)/N,N‐dimethylformamide (DMF) system. All of the above polymers were fully characterized by ¹H NMR, FTIR, elemental analysis, inherent viscosity, solubility tests, UV‐vis spectroscopy, differential scanning calorimeter (DSC), thermogravimetric analysis (TGA), and derivative of thermaogravimetric (DTG). The resulted poly(amide‐imide)s (PAIs) have showed admirable good inherent viscosities, thermal stability, and solubility. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Synthesis,chemical, and thermoelectric properties of n‐type π‐conjugated polymer composed of 1,2,4‐triazole and pyridine rings and its metal complexes

A soluble n‐type π‐conjugated polymer ( polymer 1 ) composed of a 1,2,4‐triazole ring substituted by a 4‐n‐octylphenyl subunit at the 4‐position of the 1,2,4‐triazole ring and pyridine‐2,5‐diyl rings was synthesized by Ni(cod)₂ (cod = 1,5‐cyclooctadiene) promoted dehalogenation polycondensation of 3,5‐bis(2‐bromopyridyl)‐4‐n‐octylphenyl‐1,2,4‐triazole ( monomer 1 ). A polymer complex ( polymer‐BiCl₃ ) was synthesized by the reaction of polymer 1 with BiCl₃. The UV–vis spectrum of polymer 1 exhibited an absorption maximum (λ_max value) at a longer wavelength than that exhibited by monomer 1 revealing that its π‐conjugation system was expanded along the polymer chain. Polymer 1 was electrochemically active in film, and the electrochemical reaction was accompanied with electrochromism. Thermoelectoric properties of polymer 1 and polymer‐BiCl₃ were investigated. © 2013 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 39928.     

Synthesis and properties of poly(amide–imide)s based on N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide,p‐aminobenzoic acid and various aromatic diamines

A new diimide–diacid monomer, N,N′‐bis(4‐carboxyphenyl)‐4,4′‐oxydiphthalimide (I), was prepared by azeotropic condensation of 4,4′‐oxydiphthalic anhydride (ODPA) and p‐aminobenzoic acid (p‐ABA) at a 1:2 molar ratio in a polar solvent mixed with toluene. A series of poly(amide–imide)s (PAI, III_a–m) was synthesized from the diimide–diacid I (or I′, diacid chloride of I) and various aromatic diamines by direct polycondensation (or low temperature polycondensation) using triphenyl phosphite and pyridine as condensing agents. It was found that only III_k–m having a meta‐structure at two terminals of the diamine could afford good quality, creasable films by solution‐casting; other PAIs III using diamine with para‐linkage at terminals were insoluble and crystalline; though III_g–i contained the soluble group of the diamine moieties, their solvent‐cast films were brittle. In order to improve their to solubility and film quality, copoly(amide–imide)s (Co‐PAIs) based on I and mixtures of p‐ABA and aromatic diamines were synthesized. When on equimolar of p‐ABA (m = 1) was mixed, most of Co‐PAIs IV had improved solubility and high inherent viscosities in the range 0.9–1.5 dl g^?1; however, their films were still brittle. With m = 3, series V was obtained, and all members exhibited high toughness. The solubility, film‐forming ability, crystallinity, and thermal properties of the resultant poly(amide–imide)s were investigated. © 2002 Society of Chemical Industry     

Synthesis and characterization of new cardo poly(bisbenzothiazole)s from 1,1‐bis(4‐amino‐3‐mercaptophenyl)‐4‐tert‐butylcyclohexane dihydrochloride

A new monomer 1,1‐bis(4‐amino‐3‐mercaptophenyl)‐4‐tert‐butylcyclohexane dihydrochloride, bearing the bulky pendant 4‐tert‐butylcyclohexylidene group, was synthesized from 4‐tert‐butylcyclohexanone in three steps. Its chemical structure was characterized by ¹H NMR, ¹³C NMR, MS, FTIR, and EA. Aromatic poly(bisbenzothiazole)s (PBTs V) were prepared from the new monomer and five aromatic dicarboxylic acids by direct polycondensation. The inherent viscosities were in the range of 0.63–2.17 dL/g. These polymers exhibited good solubility and thermal stability. Most of the prepared PBTs V were soluble in various polar solvents. Thermogravimetric analysis showed the decomposition temperatures at 10% weight loss that were in the range of 495–534°C in nitrogen. All the PBTs V, characterized by X‐ray diffraction, were amorphous. The UV absorption spectra of PBTs V showed a range of λ_max from 334 to 394 nm. All the PBTs V prepared had evident fluorescence emission peaks, ranging from 423 to 475 nm with different intensity. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 2000–2008, 2006     

Microwave‐assisted polycondensation of 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L‐leucine) diacid chloride with aromatic diols

A new facile and rapid polycondensation reaction of 4,4′‐(hexafluoroisopropylidene)‐N,N′‐bis(phthaloyl‐L ‐leucine) diacid chloride (1) with several aromatic diols such as phenol phthalein (2a), bis phenol‐A (2b), 4,4′‐hydroquinone (2c), 1,4‐dihydroxyanthraquinone (2d), 1,8‐dihydroxyanthraquinone (2e), 1,5‐dihydroxy naphthalene (2f), dihydroxy biphenyl (2g), and 2,4‐dihydroxyacetophenone (2h) was performed by using a domestic microwave oven in the presence of a small amount of a polar organic medium such as o‐cresol. The polymerization reactions proceeded rapidly, compared with the conventional solution polycondensation, and was completed within 10 min, producing a series of optically active poly(ester‐imide)s with quantitative yield and high inherent viscosity of 0.50–1.12 dL/g. All of the above polymers were fully characterized by IR, elemental analyses, and specific rotation. Some structural characterization and physical properties of this optically active poly(ester‐imide)s are reported. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 3003–3009, 2000     

Synthesis and characterization of novel polyaspartimides derived from 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl and various diamines

A novel bismaleimide, 2,2′‐dimethyl‐4,4′‐bis(4‐maleimidophenoxy)biphenyl, containing noncoplanar 2,2′‐dimethylbiphenylene and flexible ether units in the polymer backbone was synthesized from 2,2′‐dimethyl‐4,4′‐bis(4‐aminophenoxy)biphenyl with maleic anhydride. The bismaleimide was reacted with 11 diamines using m‐cresol as a solvent and glacial acetic acid as a catalyst to produce novel polyaspartimides. Polymers were identified by elemental analysis and infrared spectroscopy, and characterized by solubility test, X‐ray diffraction, and thermal analysis (differential scanning calorimetry and thermogravimetric analysis). The inherent viscosities of the polymers varied from 0.22 to 0.48 dL g⁻¹ in concentration of 1.0 g dL⁻¹ of N,N‐dimethylformamide. All polymers are soluble in N‐methyl‐2‐pyrrolidone, N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethylsulfoxide, pyridine, m‐cresol, and tetrahydrofuran. The polymers, except PASI‐4, had moderate glass transition temperature in the range of 188°–226°C and good thermo‐oxidative stability, losing 10% mass in the range of 375°–426°C in air and 357°–415°C in nitrogen. © 1999 John Wiley & Sons, Inc. J Appl Polym Sci 73: 279–286, 1999