Thermal and radiative characteristics of oxyfluoride glass singly doped with lanthanide ions

Rare earths-doped oxyfluoride glasses based on germanium oxide and lead fluoride were prepared from commercial raw materials. The glasses with general composition of 50GeO2-(50-x-y)PbO-yPbF2-xLnF3 (Ln=Pr3+-Yb3+), contained different concentrations of optically active dopants (x=0.2 mol.% and 2 mol.%) and PbF2 (y≤15 mol.%). The differential thermal analysis (DTA) was used to determine both thermal characteristic and thermal stability properties of the glasses in the function of the kind of dopant, its concentration, and a glass composition. Characteristic glass temperatures such as glass transition temperature (Tg), glass crystallization temperature (Tc) and temperature corresponding to the maximum of the crystallization rate (Tpc) were evaluated. On the basis of obtained results, the thermal stabilities of glasses under study were evaluated using various thermal stability criteria (Dietzel factor ?T, Saad-Poulain factors H' and S). It was found that the increase in rare earth fluoride contents influenced thermal characteristics when the characteristic temperatures of the individual glass was shifted towards higher values. The effect of the PbF2 content and the kind of rare earth impurity on the glass stability was observed. Absorption spectra of lanthanide-doped glasses were measured at room temperature and used to determine the phenomenological intensity parameters Ωt and next, to estimate radiative properties of lanthanide ions in this matrix. Radiative transition probabilities of luminescent states of Ln3+, branching ratios and radiative lifetimes were determined. The variation of the Ωt along the lanthanide series was presented and discussed.     

Process optimization of electroless copper plating and its influence on electrochemical properties of AB5-type hydrogen storage alloy

The amount of Cu coating by chemical plating was investigated based on quadratic regression orthogonal experimental design being adapted to the variation law of temperature,pH value and Ni2+concentration,and the relevant regression equation was expressed as y=2.1609+0.5295×10-3T2-0.0342P2-0.0265N2+0.0023TP+0.0020TH+0.0199PN-0.0959T+0.3814P-0.2073N.The results showed that the deposition rate augmented with the increasing in temperature,pH value and Ni2+concentration.The experimental parameters of the optimal coating were temperature 75 ℃,pH value 8.5 and Ni2+concentration 1.2 g/L.The electrochemical tests indicated that the cycle stability increased from 60.66% to 75.58%,indicating that the treated alloy exhibited better corrosion resistance.     

Effects of rare earth on inclusions and corrosion resistance of 10PCuRE weathering steel

The types,morphologies and distributions of nonmetallic inclusions in Cu-P weathering steels with and without rare earth were analyzed through a quantitative image analyzer,scanning electron microscopy(SEM)and energy dispersive spectroscopy(EDS)attached to SEM.Solid-soluble content of rare earth in the steels was analyzed by non-aqua electroanalysis and ICP.The results showed that rare earth modified the types and the morphologies of inclusions in the weathering steels.The small spherical rare earth oxysulfides and rare earth sulphides replaced the elongated MnS inclusions in the RE weathering steels.The rare earth inclusions dispersedly distributed and most inclusions were smaller than 2 μm in size.The optimum content of RE was 0.0065%-0.016% for 10PCuRE weathering steels containing about0.002% oxygen and 0.004% sulfur.Solid-soluble content of rare earth in steels was(14-20)x 10-6,which can act as a micro-alloying element.The corrosion resistance of 10PCuRE weathering steels and Q235 were studied by dry-wet cyclic immersion test.Their corrosion rates were obtained respectively.The polarization curves and pitting corrosion behaviors of weathering steels with and without rare earth were measured by electrochemical methods.The corrosion resistance of Cu-P weathering steels was improved by adding an appropriate amount of rare earth.Less and fewer rare earth inclusions largely decreased pitting susceptibility and rate of pit propagation.The pitting potential and the resistance against pitting corrosion of the RE weathering steel were significantly improved due to the modification of rare earth to inclusions.     

Lanthanide NIR luminescence for telecommunications, bioanalyses and solar energy conversion

Present-day advanced technologies heavily rely on the exciting magnetic and spectroscopic properties of lanthanide ions. In particular, their ability to generate well-characterized and intense near-infrared (NIR) luminescence is exploited in any modern fiber-optic telecommunication network. In this feature article, we first summarize the whereabouts underlying the design of highly luminescent NIR molecular edifices and materials. We then focus on describing the main trends in three applications related to this spectral range: telecommunications, biosciences, and solar energy conversion. In telecommunications, efforts concentrate presently on getting easily processable polymer-based waveguide amplifiers. Upconversion nanophosphors emitting in the visible after NIR excitation are now ubiquitous in many bioanalyses while their application to bio-imaging is still in its early stages; however, highly sensitive NIR-NIR systems start to be at hand for both in vitro and in vivo imaging, as well as dual probes combining magnetic resonance and optical imaging. Finally, both silicon-based and dye-sensitized solar cells benefit from the downconversion and upconversion capabilities of lanthanide ions to harvest UV and NIR solar light and to boost the overall quantum efficiency of these next-generation devices.     

天铁热力风机升级改造方案设计

通过对天铁集团高炉现状、风机现状的分析,提出了对热力厂风机升级改造的规划,确定了实施方案.该方案实施后将彻底改变风机渐进式改造的现象,使新高炉的备用机组发挥更大的作用,可增加现有高炉的风压、风量,使现有高炉的产量、冶炼强度进一步提高.     

Evaluation of D113 cation exchange resin for the removal of Eu(Ⅲ) from aqueous solution

Batch adsorption experiments were conducted for the adsorption of Eu(Ⅲ) ions from aqueous solution by D113 resin. The results indicated that D113 resin could adsorb Eu(Ⅲ) ion effectively from aqueous solution. The adsorption was strongly dependent on pH of the medium with enhanced adsorption as the pH turned from 3.50 to 7.00 and the optimal adsorption condition was in HAc-NaAc medium with pH value of 6.50. The maximum uptake capacity of Eu(Ⅲ) ions was 290.9 mg/g D113 at 298 K, at an initial pH value of 6.50. The overall adsorption process was best described by Lagergren-first-order kinetics. When Freundlich and Langmuir isotherms were tested, the latter had a better fit with the experimental data. The thermodynamic parameters such as free energy (G) which were all negative, indicated that the adsorption of Eu(Ⅲ) ions onto D113 resin was spontaneous and the positive value of enthalpy (H) showed that the adsorption was endothermic in nature. Thomas model was applied to experimental column data to determine the characteristic parameters of column useful for process design. Furthermore, Eu(Ⅲ) could be eluted by using 3.0 mol/L HCl solution and the D113 resin could be regenerated and reused.     

Phase structure and temperature dependent luminescence properties of Sr2LiSiO4F: Eu2+ and Sr2MgSi2O7: Eu2+ phosphors

Green-emitting Sr2LiSiO4F:Eu2+ and blue-emitting Sr2MgSi2O7:Eu2+ phosphors were synthesized by the conventional high temperature solid-state route,respectively.Their structures and photoluminescenee properties were comparatively investigated.It was found that the mixture phases of Sr2MgSi2O7 and SrF2 were obtained when a part of Sr2+ in Sr2LiSiO4F was replaced by some amount of Mg2+ in order to design the possible SrMgLiSiO4F:Eu2+ phosphor.Based on the photoluminescence analysis,Sr2LiSiO4F:Eu2+ phosphor exhibited a green broad emission band of main peak at 513 nm under the excitation of 365 nm,while the Sr2MgSi2O7:Eu2+ and SrMgLiSiO4F:Eu2+ phosphor showed blue emission centered at 467 nm.The temperature dependent photoluminescence properties and room temperature decay time for the three kinds of phosphors were also discussed in this paper.     

Er3+-substituted W-type barium ferrite: preparation and electromagnetic properties

Er3+-substituted W-type barium ferrites Ba1-xErx(Zn0.3Co0.7)2Fe16O27(x=0.00,0.05,0.10,0.15,0.20)were synthesized by polymer adsorbent combustion method.Samples were characterized by X-ray diffraction analysis(XRD),X-ray fluorescence(XRF),scanning electron microscopy(SEM)and network analyzer to investigate the relationships among Er3+concentration,crystal structure,surface mcrphology and electromagnetic properties.All the XRD patterns showed pure phase of W-type barium ferrite when x≤0.15,while the impurity phase of ErFeO3 appeared when x=0.20.The pure W-type barium ferrite showed a hexagonal flake shape.In addition,the microwave electromagnetic properties of samples were analyzed in the frequency range of 2-18 GHz.It was indicated that the electromagnetic properties were significantly improved when Er3+doping content was 0.10.The reasons were also discussed using electromagnetic theory.The optimized ferrite exhibited excellent microwave absoption performance.The maximum of reflection loss(RL)reached about-27.4 dB and RL was below-10dB at the frequency range from 8.4 GHz to 18 GHz,when the thickness was 2.6 mm.     

Recent progress report on DNA B-Z transition modulated by rare earth-amino acid complex and Alzheimer's disease amyloid beta

Rare earth dements have unique physical, magnetic, luminescent and catalytic properties. They have been successfully used as medicine and probes in luminescent resonance energy transfer (LRET) for bioassays, as well as reagents for diagnosis in magnetic resonance imaging (MRI). In this progress report, we will focus on recent progress on how rare earth amino complexes bind to DNA and change DNA structure, especially on DNA B-Z transition induced by rare earth amino acid complex and its potential impact on Alzheimer's disease (AD).     

Numerical Simulation on Inclusion and Bubble Entrapment in Solidified Shell in Model Experiment and in Mold of Continuous Caster With DC Magnetic Field

A model experiment investigating entrapment of inclusions and bubbles on the solidified shell was performed using molten steel,and the conditions for inclusion and bubble entrapment and mechanism of entrapment were studied.The results were applied to the flow behavior in the casting mold of a continuous caster.At the solid-liquid interface,entrapment of inclusions is greatly reduced by the existence of a low velocity flow,e.g.,0.05m/s.The above-mentioned interfacial flow velocity dependency of inclusion entrapment is considered to be largely influenced by changes in the thickness of the concentration boundary layer,which depend on the interfacial flow velocity.Specifically,bubbles and inclusions which enter the concentration boundary layer are drawn to the solid-liquid interface by a suction force which is several orders larger than the Saffman’s force.In addition to the above-mentioned suction force,the so-called cleaning effect is determined by fluid-dynamic forces such as drag force,etc.which act on particles,and furthermore,by resident time of particles at the solid-liquid interface,which depends on the solidification rate.In a FC mold with a 2-stage electromagnetic brake,flotation of bubbles entrained in the jet flow from the nozzle is accelerated with the large DC magnetic field.This is attributed to the braking effect of the DC field on the nozzle jet and the upward flow by the buoyancy of the bubbles.As a result,the interfacial flow velocity can be normalized by increasing the strength of the magnetic field,and entrapment of large bubbles and inclusions can be reduced.     

China's Major Non-ferrous Metals Imports & Exports

正~~     

Zinc Production by Province in 2014

正~~     

80% of Chinese Firms Purchasing Overseas Mines Ended up in the Red

<正>Minmetals Resources acquired the world’s largest copper mine under construction for USD5.85 billion.One after another,listed companies Jien Nickle,China Molybdenum and Chihong Zinc and Germanium raised money to get involved in overseas mining projects…SOEs and private enterprises are engaged in a frenzy of overseas mine purchasing.A reporter with Economic     

Copper Processing Profit Dropped Sharply,Copper Consumption Will Face Impact in the Second Half of the Year

正Judging from China’s copper consumption field,the biggest consumption unit is electric power,which accounts for 47%of total consumption;it is followed by light industry sector,including household electrical appliance,machinery,durable goods and hardware etc,which accounts for 22%of total consumption;followed by transportation field,     

Central Geological Prospecting Fund Newly Added 16.47 Million Tonnes of Bauxite in 2013

正In 2013,the Central Geological Prospecting Fund(CGPF)Project newly discovered 15 ore fields,including 3 large above ore fields,and 5medium sized ore fields.The reporter learned from the recently published"Annual Report of Central Geological Prospecting Fund Project(2013)"that,from 2006 to 2013 the CGPF     

Manufacturers of Copper Tube for Central Air Conditioner Use Face Mounting Pressure in the Final Quarter of the Year

正This year,the investment growth rate of real estate industry continued to slow down,sold area of commercial housing also dropped significantly,which brought huge pressure to the domestic air conditioning manufactures.In the first half of the year,by relying on high growth in national financial expenditure,along with investment in public infrastructure     

Xinjiang Ranks No.1 in Production of Primary Aluminum in China

正Kang Yi,Honorary Chairman of China Nonferrous Metals Industry Association,said recently at the Forum on Development of the Non-ferrous Metals Industry in Central and Western China held in Zhengzhou that,as more and more electrolytic aluminum factories in Xinjiang came into operation,the electrolytic aluminum output of Xinjiang had reached2,275,000 tons in the first 7 months this year,     

Shenhuo Coal Industry and Electricity Power Completed800,000 t/a Aluminum Project in Xinjiang

正"Xinjiang project has been completed according to schedule,but total completion and total start of production are two different concepts,after completion it still needs a gradual process of reaching production target."On the morning of November 3,Shenhuo Coal Industry and Electricity Power told investors the above statement on the investor interaction platform.     

Guangdong Metal Transaction Center has Become the Second Largest Precious Metal Transaction Platform Nationwide

正The reporter learned from Guangdong Province Precious Metal Transaction Center that in 2013the Center maintained healthy development momentum,and had become the second largest precious metal transaction platform in China in terms of market size;currently Guangdong is quickening steps of financial innovation for the Center,aiming to build a transaction center with international core competitiveness.     

Seven Rare Earth Projects Involving Close to 3 Billion Yuan Investment Landed In the HighTech Zone

正On May 22,Baotou Rare Earth Industry Cooperation Consultation MeetingProject Agreement-signing Ceremony was held in Ningbo,nearly 40 enterprises from Ningbo,Guangdong,Hunan,and Shanxi participated in project consultation.After multi-lateral communication,agreements were signed for a total of 7 rare earth projects successfully.