Effect of TiO2 nanotubes with TiCl4 treatment on the photoelectrode of dye-sensitized solar cells

In this study, we used the electrochemical anodization to prepare TiO₂ nanotube arrays and applied them on the photoelectrode of dye-sensitized solar cells. In the field emission scanning electron microscopy analysis, the lengths of TiO₂ nanotube arrays prepared by electrochemical anodization can be obtained with approximately 10 to 30 μm. After titanium tetrachloride (TiCl₄) treatment, the walls of TiO₂ nanotubes were coated with TiO₂ nanoparticles. XRD patterns showed that the oxygen-annealed TiO₂ nanotubes have a better anatase phase. The conversion efficiency with different lengths of TiO₂ nanotube photoelectrodes is 3.21%, 4.35%, and 4.34% with 10, 20, and 30 μm, respectively. After TiCl₄ treatment, the efficiency of TiO₂ nanotube photoelectrode for dye-sensitized solar cell can be improved up to 6.58%. In the analysis of electrochemical impedance spectroscopy, the value of R_k (charge transfer resistance related to recombination of electrons) decreases from 26.1 to 17.4 Ω when TiO₂ nanotubes were treated with TiCl₄. These results indicate that TiO₂ nanotubes treated with TiCl₄ can increase the surface area of TiO₂ nanotubes, resulting in the increase of dye adsorption and have great help for the increase of the conversion efficiency of DSSCs.     

Fabrication of dye-sensitized solar cells using ordered and vertically oriented TiO2 nanotube arrays with open and closed ends

Highly ordered and vertically oriented TiO₂ nanotube arrays were prepared and applied to dye sensitized solar cell (DSSC) as working electrodes. The nanotube arrays were fabricated using atomic layer deposition and AAO template. The two types of nanotube's end, closed-end and open-end, were produced by reactive ion etching (RIE) process. The structure of nanotube arrays was characterized by FE-SEM, TEM, and XRD. DSSCs using the TiO₂ nanotube arrays as working electrodes were fabricated and characterized. The DSSCs prepared from the TiO₂ nanotubes with open end exhibited higher power conversion efficiency of 1.17% than that with closed end. This result is attributed to that the open-ended TiO₂ nanotubes provided larger surface area, leading to more amount of dye molecules to adsorb followed by the higher light absorption.     

Conversion enhancement of flexible dye-sensitized solar cells based on TiO2 nanotube arrays with TiO2 nanoparticles by electrophoretic deposition

We prepared highly ordered titanium dioxide nanotube arrays (TNAs) by anodizing Ti foils in F⁻ containing electrolyte. The thickness and dye loading amount of TNAs were 26 μm and 1.06 × 10⁻⁷ mol cm⁻², respectively. TiO₂ nanoparticles (TNPs) were electrophoretically deposited on the inner wall of nanotube to produce coated nanotube arrays (TNAP). The dye loading was increased to 1.56 × 10⁻⁷ mol cm⁻², and the electron transport rate improved. TNAs and TNAP were sensitized with ruthenium dye N3 to yield dye-sensitized TiO₂ nanotube solar cells. The power conversion efficiency of TNA-based dye-sensitized solar cells (DSSCs) was 4.28%, whereas the efficiency of TNAP-based DSSCs increased to 6.28% when illuminated from the counter electrode. The increase of power conversion efficiency of TNAP-based DSSCs is ascribed to the increased surface area of TNAs and the faster electron transport rate.     

TiO2 micro-flowers composed of nanotubes and their application to dye-sensitized solar cells

TiO₂ micro-flowers were made to bloom on Ti foil by the anodic oxidation of Ti-protruding dots with a cylindrical shape. Arrays of the Ti-protruding dots were prepared by photolithography, which consisted of coating the photoresists, attaching a patterned mask, illuminating with UV light, etching the Ti surface by reactive ion etching (RIE), and stripping the photoresist on the Ti foil. The procedure for the blooming of the TiO₂ micro-flowers was analyzed by field emission scanning electron microscopy (FESEM) as the anodizing time was increased. Photoelectrodes of dye-sensitized solar cells (DSCs) were fabricated using TiO₂ micro-flowers. Bare TiO₂ nanotube arrays were used for reference samples. The short-circuit current (J_sc) and the power conversion efficiency of the DSCs based on the TiO₂ micro-flowers were 4.340 mA/cm² and 1.517%, respectively. These values of DSCs based on TiO₂ micro-flowers were higher than those of bare samples. The TiO₂ micro-flowers had a larger surface area for dye adsorption compared to bare TiO₂ nanotube arrays, resulting in improved J_sc characteristics. The structure of the TiO₂ micro-flowers allowed it to adsorb dyes very effectively, also demonstrating the potential to achieve higher power conversion efficiency levels for DSCs compared to a bare TiO₂ nanotube array structure and the conventional TiO₂ nanoparticle structure.     

Enhancement of the photoelectric performance of dye-sensitized solar cells using Ag-doped TiO<Subscript>2</Subscript> nanofibers in a TiO<Subscript>2</Subscript> film as electrode

For high solar conversion efficiency of dye-sensitized solar cells [DSSCs], TiO₂ nanofiber [TN] and Ag-doped TiO₂ nanofiber [ATN] have been extended to be included in TiO₂ films to increase the amount of dye loading for a higher short-circuit current. The ATN was used on affected DSSCs to increase the open circuit voltage. This process had enhanced the exit in dye molecules which were rapidly split into electrons, and the DSSCs with ATN stop the recombination of the electronic process. The conversion efficiency of TiO₂ photoelectrode-based DSSCs was 4.74%; it was increased to 6.13% after adding 5 wt.% ATN into TiO₂ films. The electron lifetime of DSSCs with ATN increased from 0.29 to 0.34 s and that electron recombination was reduced.     

Quasi solid state dye-sensitized solar cells with modified TiO2 photoelectrodes and triphenylamine-based dye

Quasi solid state dye-sensitized solar cells (DSSCs) have been fabricated with organic sol or TiCl₄ modified TiO₂ and porous TiO₂ photoanode and a triphenylamine-based dye (TPAR3) used as photosensitizer. Dark current measurements suggested that both modified TiO₂ photoelectrodes had significantly reduced the recombination rate of photoelectrons due to the reduced bare FTO surface in comparison to porous photoelectrode. The DSSC based on modified TiO₂ photoelectrodes showed improved photovoltaic parameters compared to the porous TiO₂ photoelectrode. The overall power conversion efficiency (PCE) is 3.27%, 4.73% and 6.8% for porous, TiCl₄ modified and sol modified TiO₂ photoelectrodes, respectively. The improved PCE with modified TiO₂ electrodes was attributed to the formation of a compact layer. This effectively improves adherence of TiO₂ to FTO surface, providing a larger TiO₂/FTO contact area and reducing the electron recombination by blocking the direct contact between redox electrolyte and the conductive FTO surface and enhances the electron collection efficiency.     

Dye-sensitized solar cells based on double-layered TiO2 composite films and enhanced photovoltaic performance

Dye-sensitized solar cells (DSSCs) are fabricated based on double-layered composite films of TiO₂ nanoparticles and hollow spheres. The photoelectric conversion performances of DSSCs based on nanoparticles/nanoparticles (PP), hollow spheres/hollow spheres (HH), hollow spheres/nanoparticles (HP), and nanoparticles/hollow spheres (PH) double-layered films are investigated, and their photo-electric conversion efficiencies are 4.33, 4.72, 4.93 and 5.28%, respectively. The enhanced performance of TiO₂ nanoparticles/hollow spheres double-layered composite film solar cells can be attributed to the combined effect of following factors. The light scattering of overlayer hollow spheres enhances harvesting light of the DSSCs and the underlayer TiO₂ nanoparticle layer ensures good electronic contact between film electrode and the F-doped tin oxide (FTO) glass substrate. Furthermore, the high surface areas and pore volume of TiO₂ hollow spheres are respectively beneficial to adsorption of dye molecules and transfer of electrolyte solution.     

Enhancing the performance of dye-sensitized solar cells based on an organic dye by incorporating TiO2 nanotube in a TiO2 nanoparticle film

The photoelectrochemical properties of a high molar extinction coefficient charge transfer organic dye containing thienylfluorene segment called FL, and the effect of incorporating TiO₂ nanotube (TiNT) in TiO₂ nanoparticle film along with the above dye on the photovoltaic performance of dye-sensitized solar cells (DSSCs) were investigated. The influence of soaking time of the TiO₂ electrode in dye solution and the effect of varying its concentration, on the solar cell efficiency was also studied. Cyclic voltammetric (CV) analysis revealed the linear relationship between the anodic peak current and the scan rate, indicating a surface-confined diffusion process.The surface morphology of TiNT was characterized using SEM, TEM and XRD. The open-circuit voltage (V_OC) of the DSSC increased with the increase in the wt% of TiNT and shows optimal value at about 5 wt%, which is correlated with the suppression of the electron recombination as found out from the electron lifetime studies.The electrochemical impedance spectroscopy (EIS) technique was employed to quantify the charge transport resistance (R_ct) and electron lifetime under different ratios of the TiNT/nanoparticle. The electron lifetimes of the DSSCs based on FL and N3 dye were very close to one another and the DSSC based on the FL showed respectable photovoltaic performance of ca. 7.8% under the light intensity of 100 mW cm⁻² (AM 1.5G).     

High-efficiency dye-sensitized solar cells based on robust and both-end-open TiO2 nanotube membranes

In the present work, dye-sensitized solar cells (DSSCs) were fabricated by incorporating transparent electrodes of ordered free-standing TiO₂ nanotube (TNT) arrays with both ends open transferred onto fluorine-doped tin oxide (FTO) conductive glass. The high-quality TiO₂ membranes used here were obtained by a self-detaching technique, with the superiorities of facile but reliable procedures. Afterwards, these TNT membranes can be easily transferred to FTO glass substrates by TiO₂ nanoparticle paste without any crack. Compared with those DSSCs consisting of the bottom-closed membranes or attached to Ti substrate, the carefully assembled and front-side illuminated DSSCs showed an enhanced solar energy conversion efficiency as high as 5.32% of 24-μm-thick TiO₂ nanotube membranes without further treatments. These results reveal that by facilitating high-quality membrane synthesis, this kind of DSSCs assembly with optimized tube configuration can have a fascinating future.     

Optimization of the dye-sensitized solar cell performance by mechanical compression

In this study, the P25 titanium dioxide (TiO₂) nanoparticle (NP) thin film was coated on the fluorine-doped tin oxide (FTO) glass substrate by a doctor blade method. The film then compressed mechanically to be the photoanode of dye-sensitized solar cells (DSSCs). Various compression pressures on TiO₂ NP film were tested to optimize the performance of DSSCs. The mechanical compression reduces TiO₂ inter-particle distance improving the electron transport efficiency. The UV–vis spectrophotometer and electrochemical impedance spectroscopy (EIS) were employed to quantify the light-harvesting efficiency and the charge transport impedance at various interfaces in DSSC, respectively. The incident photon-to-current conversion efficiency was also monitored. The results show that when the DSSC fabricated by the TiO₂ NP thin film compressed at pressure of 279 kg/cm², the minimum resistance of 9.38 Ω at dye/TiO₂ NP/electrolyte interfaces, the maximum short-circuit photocurrent density of 15.11 mA/cm², and the photoelectric conversion efficiency of 5.94% were observed. Compared to the DSSC fabricated by the non-compression of TiO₂ NP thin film, the overall conversion efficiency is improved over 19.5%. The study proves that under suitable compression pressure the performance of DSSC can be optimized.     

Ga-doped ZnO transparent electrodes with TiO<Subscript>2</Subscript> blocking layer/nanoparticles for dye-sensitized solar cells

Ga-doped ZnO [GZO] thin films were employed for the transparent electrodes in dye-sensitized solar cells [DSSCs]. The electrical property of the deposited GZO films was as good as that of commercially used fluorine-doped tin oxide [FTO]. In order to protect the GZO and enhance the photovoltaic properties, a TiO₂ blocking layer was deposited on the GZO surface. Then, TiO₂ nanoparticles were coated on the blocking layer, and dye was attached for the fabrication of DSSCs. The fabricated DSSCs with the GZO/TiO₂ glasses showed an enhanced conversion efficiency of 4.02% compared to the devices with the normal GZO glasses (3.36%). Furthermore, they showed better characteristics even than those using the FTO glasses, which can be attributed to the reduced charge recombination and series resistance.     

Two novel hierarchical homogeneous nanoarchitectures of TiO<Subscript>2</Subscript> nanorods branched and P25-coated TiO<Subscript>2</Subscript> nanotube arrays and their photocurrent performances

We report here for the first time the synthesis of two novel hierarchical homogeneous nanoarchitectures of TiO₂ nanorods branched TiO₂ nanotube arrays (BTs) and P25-coated TiO₂ nanotube arrays (PCTs) using two-step method including electrochemical anodization and hydrothermal modification process. Then the photocurrent densities versus applied potentials of BTs, PCTs, and pure TiO₂ nanotube arrays (TNTAs) were investigated as well. Interestingly, at -0.11 V and under the same illumination condition, the photocurrent densities of BTs and PCTs show more than 1.5 and 1 times higher than that of pure TNTAs, respectively, which can be mainly attributed to significant improvement of the light-absorbing and charge-harvesting efficiency resulting from both larger and rougher surface areas of BTs and PCTs. Furthermore, these dramatic improvements suggest that BTs and PCTs will achieve better photoelectric conversion efficiency and become the promising candidates for applications in DSSCs, sensors, and photocatalysis.     

Photoelectrocatalytic properties of Ag nanoparticles loaded TiO2 nanotube arrays prepared by pulse current deposition

A pulse current deposition technique was adopted to construct highly dispersed Ag nanoparticles on TiO₂ nanotube arrays which were prepared by the electrochemical anodization. The morphology, crystallinity, elemental composition, and UV-vis absorption of Ag/TiO₂ nanotube arrays were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), X-ray diffraction (XRD), and diffuse reflectance spectra (DRS). In particular, the photoelectrochemical properties and photoelectrocatalytic activity under UV light irradiation and the photocatalytic activity under visible light irradiation for newly synthesized Ag/TiO₂ nanotube arrays were investigated. The maximum incident photon to charge carrier efficiency (IPCE) value of Ag/TiO₂ nanotube arrays was 51%, much higher than that of pure TiO₂ nanotube arrays. Ag/TiO₂ nanotube arrays exhibited higher photocatalytic activities than the pure TiO₂ nanotube arrays under both UV and visible light irradiation. The photoelectrocatalytic activity of Ag/TiO₂ nanotube arrays under UV light irradiation was 1.6-fold enhancement compared with pure TiO₂ nanotube arrays. This approach can be used in synthesizing various metal-loaded nanotube arrays materials.     

Enhanced efficiency in dye-sensitized solar cells based on TiO2 nanocrystal/nanotube double-layered films

A new bilayer-structured film with TiO₂ nanocrystals as underlayer and TiO₂ nanotubes as overlayer was fabricated. The resultant double-layer TiO₂ (DL-TiO₂) film could significantly improve the efficiency of dye-sensitized solar cells (DSSCs) owing to its synergic effects, i.e. effective dye adsorption mainly originated from TiO₂ nanocrystal layer and rapid electron transport in one-dimensional TiO₂ nanotube layer. The overall energy-conversion efficiency (η) of 6.15% was achieved by the formation of DL-TiO₂ film, which is 44.7% higher than that formed by pure nanocrystalline TiO₂ (NC-TiO₂) film and far larger than that formed by nanotube TiO₂ (NT-TiO₂) film (η = 0.37%). The charge recombination behavior of cells was investigated by electrochemical impedance spectra, and the results showed that DL-TiO₂ film-based cell possessed the lowest transfer resistance and the longest electron lifetime. The incident-photon-to-current efficiency spectra indicated that the broad bands covered almost the entire visible spectrum from 400 to 700 nm with the maxima of 57.3%, 40.3%, and 2.2% at a wavelength of ∼530 nm for DL-TiO₂-, NC-TiO₂-, and NT-TiO₂-based solar cells, respectively. It is expected that the double-layer film electrode can be extended to other composite films with different layer structures and morphologies for enhancing the efficiencies of DSSCs.     

Enhanced power conversion efficiency in dye-sensitized solar cells with TiO2 aggregates/nanocrystallites mixed photoelectrodes

Photoelectrodes of mixed microsized TiO₂ aggregates and individually dispersed TiO₂ nanocrystallites with different ratios were fabricated and studied for improved power conversion efficiency in dye-sensitized solar cells (DSCs). TiO₂ aggregates/nanocrystallites composites possess several advantages for high performance of DSCs, including the light scattering by the microsized TiO₂ aggregates and the high surface area of nanocrystallites both in aggregates and individually dispersed. A high power conversion efficiency of 7.59% was achieved with mixed TiO₂ aggregates/nanocrystallites photoelectrode using conventional dye N3, without applying anti-reflection coating, back-scattering layer, or chemical treatment. The electron transport properties of DSCs with mixed photoelectrodes were investigated by electrochemical impedance spectra, and the results showed that such a photoelectrode with mixed aggregates and nanocrystallites possess better connectivity for efficient electron transport.     

Effect of compressed TiO2 nanoparticle thin film thickness on the performance of dye-sensitized solar cells

In this study, dye-sensitized solar cells (DSSCs) were fabricated using nanocrystalline titanium dioxide (TiO₂) nanoparticles as photoanode. Photoanode thin films were prepared by doctor blading method with 420 kg/cm² of mechanical compression process and heat treatment in the air at 500°C for 30 min. The optimal thickness of the TiO₂ NP photoanode is 26.6 μm with an efficiency of 9.01% under AM 1.5G illumination at 100 mW/cm². The efficiency is around two times higher than that of conventional DSSCs with an uncompressed photoanode. The open-circuit voltage of DSSCs decreases as the thickness increases. One DSSC (sample D) has the highest conversion efficiency while it has the maximum short-circuit current density. The results indicate that the short-circuit current density is a compromise between two conflict factors: enlargement of the surface area by increasing photoanode thickness and extension of the electron diffusion length to the electrode as the thickness increases.     

Synthesis and electrochemical properties of CeO2 nanoparticle modified TiO2 nanotube arrays

In this paper, a cerium dioxide (CeO₂) modified titanium dioxide (TiO₂) nanotube array film was fabricated by electrodeposition of CeO₂ nanoparticles onto an anodized TiO₂ nanotube array. The structural investigation by X-ray diffraction, scanning electron microscopy and transmission electron microscopy indicated that the CeO₂ nanoparticles grew uniformly on the walls of the TiO₂ nanotubes. The composite was composed of cubic-phase CeO₂ crystallites and anatase-phase TiO₂ after annealing at 450 °C. The cyclic voltammetry and chronoamperometric charge/discharge measurement results indicated that the CeO₂ modification obviously increased the charge storage capacity of the TiO₂ nanotubes. The charge transfer process at the surface, that is, the pseudocapacitance, was the dominate mechanism of the charge storage in CeO₂-modified TiO₂ nanotubes. The greater number of surface active sites resulting from uniform application of the CeO₂ nanoparticles to the well-aligned TiO₂ nanotubes contributed to the enhancement of the charge storage density.     

Faradaic impedance to analyze charge recombination in photoelectrode of dye-sensitized solar cell

Charge transfer on the photoelectrode of dye sensitized solar cell (DSC) is composed of the various processes as follows: photoexcitation of electron in the dye; electron injection from the excited dye into the conduction band of oxide semiconductor; electron diffusion in the oxide semiconductor, reaction between oxidized dye and iodide ions (I⁻); and charge recombination. The charge recombination is one of the main factors that limit the efficiency of photoelectric conversion at photoelectrode. It is well known that 4-tert-butyl pyridine (TBP) is the useful additive in order to suppress the charge recombination. The authors fabricated the DSC with two photoelectrode materials such as titanium dioxide (TiO₂) and zinc oxide (ZnO), and analyzed the charge recombination by using electrochemical impedance spectroscopy. Theoretical equation of Faradaic impedance was derived from the reaction model of photoelectorde, and the charge transfer resistance of the photoelectrode was defined from the Faradaic impedance. In addition, the influence of the charge recombination on the impedance spectrum of the photoelectrode was discussed by the comparison between simulated and experimental results.     

Self-organized vanadium and nitrogen co-doped titania nanotube arrays with enhanced photocatalytic reduction of CO2 into CH4

Self-organized V-N co-doped TiO₂ nanotube arrays (TNAs) with various doping amount were synthesized by anodizing in association with hydrothermal treatment. Impacts of V-N co-doping on the morphologies, phase structures, and photoelectrochemical properties of the TNAs films were thoroughly investigated. The co-doped TiO₂ photocatalysts show remarkably enhanced photocatalytic activity for the CO₂ photoreduction to methane under ultraviolet illumination. The mechanism of the enhanced photocatalytic activity is discussed in detail.     

Capability of coupled CdSe/TiO2 heterogeneous structure for photocatalytic degradation and photoconductivity

Highly ordered TiO₂ nanotube arrays (TiO₂-NTAs), with a uniform tube size on titanium substrate, were obtained by means of reoxidation and annealing. A composite structure, CdSe quantum dots@TiO₂ nanotube arrays (CdSe QDs@TiO₂-NTAs), was fabricated by assembling CdSe quantum dots into TiO₂-NTAs via cyclic voltammetry electrochemical deposition. The X-ray diffractometer (XRD), field-emission scanning electron microscope (SEM), and transmission electron microscope (TEM) were carried out for the determination of the composition and structure of the tubular layers. Optical properties were investigated by ultraviolet-visible spectrophotometer (UV-Vis). Photocurrent response under visible light illumination and photocatalytic activity of samples by degradation of methyl orange were measured. The results demonstrated that the photo absorption of the composite film shifted to the visible region, and the photocurrent intensity was greatly enhanced due to the assembly of CdSe QDs. Especially, photocurrent achieved a maximum of 1.853 μA/cm² after five voltammetry cycles of all samples. After irradiation under ultra violet-visible light for 2 h, the degradation rate of composition to methyl orange (MO) reached 88.20%, demonstrating that the CdSe QDs@TiO₂-NTAs exhibited higher photocatalytic activity.