Preparation and characterization of polystyrene–poly(ethylene oxide) amphiphilic block copolymers via atom transfer radical polymerization: Potential application as paper coating materials

Poly(ethylene oxide) (PEO) monochloro macroinitiators or PEO telechelic macroinitiators (Cl‐PEO‐Cl) were prepared from monohydroxyfunctional or dihydroxyfunctional PEO and 2‐chloro propionyl chloride. These macroinitiators were applied to the atom transfer radical polymerization of styrene (S). The polymerization was carried out in bulk at 140°C and catalyzed by Copper(I) chloride (CuCl) in the presence of 2,2′‐bipyridine (bipy) ligand (CuCl/bipy). The amphiphilic copolymers were either A‐B diblock or A‐B‐A triblock type, where A block is polystyrene (PS) and B block is PEO. The living nature of the polymerizations leads to block copolymers with narrow molecular weight distribution (1.072 < M_w/M_n < 1.392) for most of the macroinitiators synthesized. The macroinitiator itself and the corresponding block copolymers were characterized by FTIR, ¹H NMR, and SEC analysis. By adjusting the content of the PEO blocks it was possible to prepare water‐soluble/dispersible block copolymers. The obtained block copolymers were used to control paper surface characteristics by surface treatment with small amount of chemicals. The printability of the treated paper was evaluated with polarity factors, liquid absorption measurements, and felt pen tests. The adsorption of such copolymers at the solid/liquid interface is relevant to the wetting and spreading of liquids on hydrophobic/hydrophilic surfaces. From our study, it is observed that the chain length of the hydrophilic block and the amount of hydrophobic block play an important role in modification of the paper surface. Among all of block copolymers synthesized, the PS‐b‐PEO‐b‐PS containing 10 wt % PS was found to retard water absorption considerably. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 102: 4304–4313, 2006     

Synthesis of polyethylene oxide end‐capped with perfluoroalkyl groups/polystyrene prototype brushes

Polystyrene (PS)/poly(ethylene oxide) (PEO) prototype brushes were prepared by alternating free‐radical copolymerization of methacryloyl‐terminated PS and α‐vinylbenzyl‐ω‐hydroxy or α‐vinylbenzyl‐ω‐perfluoroalkyl (R_f) PEO macromonomers with the addition of Lewis acid (SnCl₄). It was found from their dilute‐solution properties that PS/PEO end‐capped with R_f (PBR_f), and PS/PEO having OH groups at terminal ends (PBOH) prototype brushes formed a single molecule in benzene and aggregates in chloroform, respectively. However, the brush PBOH formed a single molecule in N,N‐dimethylformamide. Such aggregation behaviors seemed to be caused by the interaction between hydroxy groups of PEO chain ends. The brush PBOH was also converted into PBR_f‐type brush by chemical modification, using corresponding acid chloride. The substitution of R_f groups was ～70% due to slipping of terminal hydroxy groups into PEO internal domains. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 772–778, 2006     

Synthesis and characterization of copolymers with the same proportions of polystyrene and poly(ethylene oxide) compositions but different connection sequence by the efficient Williamson reaction

The AB type diblock PS‐b‐PEO and ABA type triblock PS‐b‐PEO‐b‐PS copolymers containing the same proportions of polystyrene (PS) and poly(ethylene oxide) (PEO) but different connection sequence were synthesized and investigated. Using the sequential living anionic polymerization and ring‐opening polymerization mechanisms, diblock PS‐b‐PEO copolymers with one hydroxyl group at the PEO end were obtained. Then, using the classic and efficient Williamson reaction (realized in a ‘click’ style), triblock PS‐b‐PEO‐b‐PS copolymers were achieved by a coupling reaction between hydroxyl groups at the PEO end of PS‐b‐PEO. The PS‐b‐PEO and PS‐b‐PEO‐b‐PS copolymers were well characterized by ¹H NMR spectra and SEC measurements. The critical micelle concentration (CMC) and thermal behaviors were also investigated by steady‐state fluorescence spectra and DSC, respectively. The results showed that, because the PEO segment in triblock PS‐b‐PEO‐b‐PS was more restricted than that in diblock PS‐b‐PEO copolymer, the former PS‐b‐PEO‐b‐PS copolymer always gave higher CMC values and lower crystallization temperature (T_c), melting temperature (T_m) and degree of crystallinity (X_c) parameters. © 2015 Society of Chemical Industry     

Synthesis and properties of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers

A series of well‐defined and property‐controlled polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐polystyrene (PS) triblock copolymers were synthesized by atom‐transfer radical polymerization, using 2‐bromo‐propionate‐end‐group PEO 2000 as macroinitiatators. The structure of triblock copolymers was confirmed by ¹H‐NMR and GPC. The relationship between some properties and molecular weight of copolymers was studied. It was found that glass‐transition temperature (T_g) of copolymers gradually rose and crystallinity of copolymers regularly dropped when molecular weight of copolymers increased. The copolymers showed to be amphiphilic. Stable emulsions could form in water layer of copolymer–toluene–water system and the emulsifying abilities of copolymers slightly decreased when molecular weight of copolymers increased. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 101: 727–730, 2006     

Synthesis and gelation of novel fluoroalkyl end‐capped N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide copolymers containing triol segments—Interaction of these fluorinated gels with various hydrophilic compounds

Fluoroalkyl end‐capped N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide (DOBAA) copolymers containing triol segments were prepared by the reactions of fluoroalkanoyl peroxide with the corresponding monomer and N‐tris(hydroxymethyl)methylacrylamide (NAT). These obtained fluorinated copolymers [R_F‐(DOBAA)_x‐(NAT)_y‐R_F] were found to cause gelation in water, dimethyl sulfoxide, and N,N‐dimethylformamide under the non‐crosslinked conditions, although the corresponding nonfluorinated DOBAA–NAT copolymer [‐(DOBAA)_x‐(NAT)_y‐] could cause no gelation in these solvents. This gelation is governed by the synergistic interaction of strong aggregations of end‐capped fluoroalkyl segments and intermolecular hydrogen bonding between triol segments. We also studied the uptake and release of a variety of hydrophilic compounds such as methylene blue, methyl orange, 4‐hydroxyazobenzene‐4′‐sulfonic acid sodium salt, 2,4‐dihydroxyazobenzene‐4′‐sulfonic acid sodium salt, acriflavine hydrochloride, acridine hydrochloride, lucigenin, and fluorescein by this fluorinated copolymer gel and fluoroalkyl end‐capped NAT homopolymer gel [R_F‐(NAT)_n‐RF] for comparison. It was demonstrated that the uptake and release ratios of these hydrophilic compounds by R_F‐(DOBAA)_x‐(NAT)_y‐R_F gel become generally lower than those of R_F‐(NAT)_n‐R_F gel. Interestingly, R_F‐(DOBAA)_x‐(NAT)_y‐R_F gel has no releasing power toward methylene blue, acridine hydrochloride, lucigenin, and fluorescein, although R_F‐(NAT)_n‐R_F gel has a good releasing power toward these compounds. Additionally, R_F‐(DOBAA)_x‐(NAT)_y‐R_F gel was applied to the controlled release of anticancer drugs such as methotrexate (MTX), and the releasing ratios of MTX became higher with increasing pH values (from pH 4.3 to 9.1). © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 88:3212–3217, 2003     

Poly(ethylene oxide)‐block‐polystyrene copolymers obtained by radical polymerization involving chain‐transfer processes

Poly(ethylene oxide)‐block‐polystyrene (PEO–PSt) block copolymers were prepared by radical polymerization of styrene in the presence of iodoacetate—terminated PEO (PEO‐I) as a macromolecular chain‐transfer agent. PEO‐I was synthesized by successively converting the OH end‐group of α‐methoxy ω‐hydroxy PEO to chloroacetate and then to the iodoacetate. The chain‐transfer constant of PEO‐I was estimated from the rate of consumption of the transfer agent versus the rate of consumption of the monomer (C_{tr, PEO‐I} = 0.23). Due to the involvement of degenerative transfer, styrene polymerization in the presence of PEO‐I displayed some of the characteristics of a controlled/‘living’ process, namely an increase in the molecular weight and decrease of polydispersity with monomer conversion. However, because of the slow consumption of PEO‐I due to its low chain‐transfer constant, this process was not a fully controlled one, as indicated by the polydispersity being higher than in a controlled polymerization process (1.65 versus < 1.5). The formation of PEO–PSt block copolymers was confirmed by the use of size‐exclusion chromatography and ¹H NMR spectroscopy. Copyright © 2004 Society of Chemical Industry     

Synthesis and characterization of polystyrene‐b‐poly(ethylene oxide)‐b‐polystyrene triblock copolymers by atom‐transfer radical polymerization

Well‐defined polystyrene (PS)‐b‐poly(ethylene oxide) (PEO)‐b‐PS triblock copolymers were synthesized by atom‐transfer radical polymerization (ATRP), using C—X‐end‐group PEO as macroinitiators. The triblock copolymers were characterized by infrared spectroscopy, nuclear magnetic resonance spectroscopy, and gel permeation chromatography. The experimental results showed that the polymerization was controlled/living. It was found that when the number‐average molecular weight of the macroinititors increased from 2000 to 10,000, the molecular weight distribution of the triblock copolymers decreased roughly from 1.49 to 1.07 and the rate of polymerization became much slower. The possible polymerization mechanism is discussed. According to the Cu content measured with atomic absorption spectrometry, the removal of catalysts, with CHCl₃ as the solvent and kaolin as the in situ absorption agent, was effective. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 2882–2888, 2000     

Efficient preparation of novel fluoroalkyl end‐capped oligomers/titanium dioxide nanocomposites

Novel fluoroalky end‐capped oligomers/titanium dioxide nanocomposites were prepared by the hydrolysis of titanium isopropoxide in the presence of fluoroalkyl end‐capped N‐(1,1‐dimethyl‐3‐oxobutyl)acrylamide oligomer [R_F‐(DOBAA)_n‐R_F], fluoroalkyl end‐capped N,N‐dimethylacrylamide oligomer [R_F‐(DMAA)_n‐R_F], and fluoroalkyl end‐capped acrylic acid oligomer [R_F‐(ACA)_n‐R_F] in tetrahydrofuran under mild conditions. In these fluorinated oligomers, R_F‐(ACA)_n‐R_F oligomer is more effective for the preparation of the corresponding oligomers/titanium dioxide nanocomposites, and this oligomer can afford the expected fluorinated titanium dioxide nanocomposites in higher isolated yields. In addition, R_F‐(ACA)_n‐R_F/titanium dioxide composites are nanometer size‐controlled very fine nanoparticles (14–48 nm), and exhibited a good dispersibility not only in water but also in traditional organic solvents. Fluoroalkyl end‐capped oligomers/titanium dioxide nanocomposites were also applied to the surface modification of the common organic polymers such as poly(methyl methacrylate) to exhibit a good oleophobic and hydrophilic characteristics on the surface. POLYM. COMPOS., 2009. © 2008 Society of Plastics Engineers.     

Preparation and applications of novel fluoroalkyl end‐capped sulfonic acid oligomers–silica gel polymer hybrids

Fluoroalkyl end‐capped 2‐methacryloxyethanesulfonic acid homo‐oligomer [R_F–(MES)_n–R_F] and 2‐methacryloxyethanesulfonic acid–N,N‐dimethylacrylamide co‐oligomers [R_F–(MES)_x–(DMAA)_y–R_F] reacted with tetraethoxysilane (TEOS) under acidic conditions to afford R_F–(MES)_n–R_F homo‐oligomer–SiO₂ polymer hybrid and R_F–(MES)_x–(DMAA)_y–R_F co‐oligomer–SiO₂ polymer hybrid, respectively. Thermogravimetric–mass spectra showed that the thermal stability of R_F–(MES)_n–R_F homo‐oligomer–SiO₂ polymer hybrid was superior to that of traditionally well‐known perfluorinated ion exchange polymers such as Nafion 112 (TR). The sol solutions of the fluorinated co‐oligomer–SiO₂ polymer hybrid were applied to the surface modification of glass to exhibit not only a strong oleophobicity imparted by fluorine but also a good hydrophilicity on the glass surface. On the other hand, R_F–(MES)_x–(DMAA)_y–R_F co‐oligomer reacted with TEOS in the presence of a variety of silica nanoparticles (mean diameters: 11–95 nm) under alkaline conditions to afford fluoroalkyl end‐capped oligomers–silica nanoparticles (mean diameters: 32–173 nm) with a good dispersibility and stability in methanol. Similarly, a variety of fluorinated oligomers containing sulfo groups–silica nanoparticles were prepared by the homo‐ and co‐oligomerizations of fluoroalkanoyl peroxides with 2‐methacryloxyethane sulfonic acid (MES) and comonomers such as N,N‐dimethylacrylamide (DMAA) and acryloylmorpholine (ACMO) in the presence of silica nanoparticles. Interestingly, these isolated fluorinated particle powders were found to afford nanometer size‐controlled colloidal particles with a good redispersibility and stability in aqueous and organic media such as methanol. These fluorinated nanoparticles containing sulfo groups were also applied to an excellent heterogeneous catalyst for Bronsted acid‐catalyzed transformations. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 103: 110–117, 2007     

Investigation of the nanocellular foaming of polystyrene in supercritical CO2 by adding a CO2‐philic perfluorinated block copolymer

Nanocellular foaming of polystyrene (PS) and a polystyrene copolymer (PS‐b‐PFDA) with fluorinated block (1,1,2,2‐tetrahydroperfluorodecyl acrylate block, PFDA) was studied in supercritical CO₂ (scCO₂) via a one‐step foaming batch process. Atom Transfer Radical Polymerization (ATRP) was used to synthesize all the polymers. Neat PS and PS‐b‐PFDA copolymer samples were produced by extrusion and solid thick plaques were shaped in a hot‐press, and then subsequently foamed in a single‐step foaming process using scCO₂ to analyze the effect of the addition of the fluorinated block copolymer in the foaming behaviour of neat PS. Samples were saturated under high pressures of CO₂ (30 MPa) at low temperatures (e.g., 0°C) followed by a depressurization at a rate of 5 MPa/min. Foamed materials of neat PS and PS‐b‐PFDA copolymer were produced in the same conditions showing that the presence of high CO₂‐philic perfluoro blocks, in the form of submicrometric separated domains in the PS matrix, acts as nucleating agents during the foaming process. The preponderance of the fluorinated blocks in the foaming behavior is evidenced, leading to PS‐b‐PFDA nanocellular foams with cell sizes in the order of 100 nm, and bulk densities about 0.7 g/cm³. The use of fluorinated blocks improve drastically the foam morphology, leading to ultramicro cellular and possibly nanocellular foams with a great homogeneity of the porous structure directly related to the dispersion of highly CO₂‐philic fluorinated blocks in the PS matrix. © 2012 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Hyperbranched–linear–hyperbranched ABA‐type block copolymers based on poly(ethylene oxide) and polyglycerol

BACKGROUND: Until recently, hyperbranched polymers were thought to be ill‐defined materials that were not useful as building blocks for well‐defined complex polymer architectures. It is a current challenge to develop strategies that offer rapid access to well‐defined hyperbranched block copolymers. RESULTS: A convenient three‐step protocol for the synthesis of double‐hydrophilic hyperbranched–linear–hyperbranched ABA‐type triblock copolymers based on poly(ethylene oxide) (PEO) and hyperbranched polyglycerol (hbPG) is presented. The Bola‐type polymers exhibiting an aliphatic polyether structure were prepared from a linear (lin) linPG‐b‐PEO‐b‐linPG precursor triblock. The materials exhibit low polydispersities (M_w/M_n) in the range 1.19–1.45. The molecular weights of the block copolymers range from 6300 to 26 200 g mol^?1, varying in the length of both the linear PEO chain as well as the hbPG segments. Detailed characterization of the thermal properties using differential scanning calorimetry demonstrates nanophase segregation of the blocks. CONCLUSION: The first example of well‐defined ABA hyperbranched–linear–hyperbranched triblock copolymers with PEO middle block and hbPG A‐blocks is presented. The biocompatible nature of the aliphatic polyether blocks renders these materials interesting for biomedical purposes. These new materials are also intriguing with respect to their supramolecular order and biomineralization properties. Copyright © 2009 Society of Chemical Industry     

Nonaqueous emulsion copolymerization of ethyl methacrylate/lauryl methacrylate in propylene glycol. I. Evaluation of stabilizing efficiency for PEO‐PS‐PEO triblock copolymers

Sixteen poly(ethylene oxide)–polystyrene–poly(ethylene oxide) (PEO‐PS‐PEO) triblock copolymers were synthesized by anionic polymerization. They were characterized by gel permeation chromatography and proton NMR. The molecular weight of these 16 PEO‐PS‐PEO triblock copolymers ranged from 5100 to 13,300. The polystyrene (PS) block length was between 13 and 41. The PEO block length was between 41 and 106. The polydispersity index for these PEO‐PS‐PEO triblock copolymers were 1.05 ± 0.02. When using these stabilizers in the emulsion copolymerization of ethyl methacrylate and lauryl methacylate in propylene glycol, only a narrow window of stability was observed. Stable latexes were formed only when the molecular weights of the PEO blocks were within the range of 5300–7700 and the molecular weights of the PS blocks were 2000–4000. The stabilizer ability for these triblock copolymers was correlated with their molecular weight and conformation in propylene glycol. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 80: 1951–1962, 2001     

Crystallization behavior of dry‐brush PEO‐PS block copolymer and PEO homopolymer blend

The crystallization behavior of semicrystalline PEO homopolymer/triblock PS‐PEO‐PS copolymer blend system, which exhibited “Dry‐Brush” in the melt. A symmetric polystyrene–poly(ethylene oxide)–polystyrene triblock copolymer was blended with PEO homopolymer (h‐PEO) having the same molecular weight as that of the PEO block in the copolymer. Considering the composition of the blend (W_ps ≥ 0.8), PEO spheres were formed in the blend. Because of the dry‐brush phase behavior of this blend, h‐PEO added was localized in the PEO microdomains, which increases the domain size without changing the microdomain morphology. The crystallization of PEO block was confined within the microdomains and the crystallization temperature was about 60°C lower than normal. Self‐seeding tests were performed to clarify the nucleation mechanism of the blend. Because the droplets size varies greatly, multicrystallization peaks were witnessed in the self‐seeding process. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 2007     

New fluorinated polysiloxanes containing an ester function in the spacer—II. Surface tension studies

The surface tensions of fluorinated polysiloxanes prepared by hydrosilylation of unsaturated perfluoroalkyl esters derived from undecylenic acid [CH₂?CH? (CH₂)₈? COO? CH₂? CH₂? R_F, with R_F = C₆F₁₃, C₈F₁₇, and C₈F₁₇? (CH₂)₁₀COO? CH₂? CH₂? CH?CH₂] by methylhydrodimethylsiloxane copolymers of various Si? H contents have been measured. The critical surface tensions, γ_c, and the solid surface tensions, γ^D_s, were deduced from n-alkane and water contact angle data. They decrease as the perfluoroalkyl graft content of the copolymers increases. Some of them, which are in the range of the lowest surface tension fluoro polymers known, are observed when the fluorinated segments are self-organized at the interface, i.e. when the polymers are mesomorphous or crystalline at room temperature.     

Reactions of copper ions with amines in the presence of self‐assembled fluorinated oligomeric aggregates

Copper acetylacetonate reacted with N,N‐diethylmethylamine and 4,4′‐thiobis(6‐t‐butyl‐o‐cresol) in the presence of self‐assembled fluorinated oligmeric aggregates formed by fluoroalkyl end‐capped 2‐[3‐(2H‐benzotriazol‐2‐yl)‐4‐hydroxyphenyl]ethyl methacrylate–N,N‐dimethylacrylamide cooligomer [R_F–(BTRI)_x–(DMAA)_y–R_F; R_F = CF(CF₃)OCF₂CF(CF₃)OC₃F₇] to afford stable fluorinated aggregates–copper ions nanocomposites. These fluorinated oligomeric aggregates–copper ions nanocomposites thus obtained were applied to the dispersion of copper ions nanocomposites above the traditional organic polymeric materials such as poly(methyl methacrylate) (PMMA) surface. On the other hand, copper (II) chloride reacted with hydrazine hydrate in the presence of fluorinated oligomeric aggregates formed by fluoroalkyl end‐capped N,N‐dimethylacrylamide homooligomer to afford stable copper nanoparticles. © 2006 Wiley Periodicals, Inc. J Appl Polym Sci 100: 1328–1334, 2006     

Efficiency above 6% in poly(3‐hexylthiophene):phenyl‐C‐butyric acid methyl ester photovoltaics via simultaneous addition of poly(3‐hexylthiophene) based grafted graphene nanosheets and hydrophobic block copolymers

A combination of reduced graphene oxide (rGO) nanosheets grafted with regioregular poly(3‐hexylthiophene) (P3HT) (rGO‐g‐P3HT) and P3HT‐b‐polystyrene (PS) block copolymers was utilized to modify the morphology of P3HT:[6,6]‐phenyl‐C71‐butyric acid methyl ester (PC71BM) active layers in photovoltaic devices. Efficiencies greater than 6% were acquired after a mild thermal annealing. To this end, the assembling of P3HT homopolymers and P3HT‐b‐PS block copolymers onto rGO‐g‐P3HT nanosheets was investigated, showing that the copolymers were assembled from the P3HT side onto the rGO‐g‐P3HT nanosheets. Assembling of P3HT‐b‐PS block copolymers onto the rGO‐g‐P3HT nanosheets developed the net hole and electron highways for charge transport, thereby in addition to photoluminescence quenching the charge mobility (μ_h and μ_e) values increased considerably. The best charge mobilities were acquired for the P3HT₅₀₀₀₀:PC71BM:rGO‐g‐P3HT₅₀₀₀₀:P3HT₇₀₀₀‐b‐PS₁₀₀₀ system (μ_h = 1.9 × 10^?5 cm² V^–1 s^–1 and μ_e = 0.8 × 10^?4 cm² V^–1 s^–1). Thermal annealing conducted at 120 °C also further increased the hole and electron mobilities to 9.8 × 10^?4 and 2.7 × 10^?3 cm² V^–1 s^–1, respectively. The thermal annealing acted as a driving force for better assembly of the P3HT‐b‐PS copolymers onto the rGO‐g‐P3HT nanosheets. This phenomenon improved the short circuit current density, fill factor, open circuit voltage and power conversion efficiency parameters from 11.13 mA cm^?2, 0.63 V, 62% and 4.35% to 12.98 mA cm^?2, 0.69 V, 68% and 6.09%, respectively. © 2019 Society of Chemical Industry     

The study of poly(styrene‐co‐p‐(hexafluoro‐2‐hydroxylisopropyl)‐α‐methylstyrene)/poly(ethylene oxide) blends

Different hydroxyl content poly(styrene‐co‐p‐(hexafluoro‐2‐hydroxylisopropyl)‐α‐methylstyene) [PS(OH)‐X] copolymers were synthesized and blends with 2,2,6,6‐tetramrthyl‐piperdine‐1‐oxyl end spin‐labeled PEO [SLPEO] were prepared. The miscibility behavior of all the blends was predicted by comparing the critical miscible polymer–polymer interaction parameter (χ_crit) with the polymer–polymer interaction parameter (χ). The micro heterogeneity, chain motion, and hydrogen bonding interaction of the blends were investigated by the ESR spin label method. Two spectral components with different rates of motion were observed in the ESR composite spectra of all the blends, indicating the existence of microheterogeneity at the molecular level. According to the variations of ESR spectral parameters T_a, T_d, ΔT, T_50G and τ_c, with the increasing hydroxyl content in blends, it was shown that the extent of miscibility was progressively enhanced due to the controllable hydrogen bonding interaction between the hydroxyl in PS(OH) and the ether oxygen in PEO. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 2312–2317, 2004     

Synthesis of poly(fluorinated styrene)‐block‐poly(ethylene oxide) amphiphilic copolymers via atom transfer radical polymerization: potential application as paper coating materials

BACKGROUND: The surface of a substrate which comprises a fibrous material is brought into contact with a type of amphiphilic block copolymer which comprises hydrophilic/hydrophobic polymeric blocks. These amphiphilic copolymers have been synthesized by atom transfer radical polymerization (ATRP) technique. The atom transfer radical polymerization of poly(2,3,4,5,6‐pentafluorostyrene)‐block‐poly(ethylene oxide) (PFS‐b‐PEO) copolymers (di‐ and triblock structures) with various ranges of PEO molecular weights was initiated by a PEO chloro‐telechelic macroinitiator. The polymerization, carried out in bulk and catalysed by copper(I) chloride in the presence of 2,2′‐bipyridine ligand, led to A–B–A amphiphilic triblock and A–B amphiphilic diblock structures. RESULTS: With most of the macroinitiators, the living nature of the polymerizations led to block copolymers with narrow molecular weight distributions (1.09 < M_w/M_n < 1.33) and well‐controlled molecular structures. These block copolymers turned out to be water‐soluble through adjustment of the PEO block content (>90 wt%). Of all the block copolymers synthesized, PFS‐b‐PEO(10k)‐b‐PFS containing 10 wt% PFS was found to retard water absorption considerably. CONCLUSION: The printability of paper treated with the copolymers was evaluated with contact angle measurements and felt pen tests. The adsorption of such copolymers at the solid/liquid interface is relevant to the wetting and spreading of liquids on hydrophobic/hydrophilic surfaces. Copyright © 2009 Society of Chemical Industry     

Preparation and characterization of amphiphilic block copolymer of polyacrylonitrile‐block‐poly(ethylene oxide)

The synthesis of polyacrylonitrile‐block‐poly(ethylene oxide) (PAN‐b‐PEO) diblock copolymers is conducted by sequential initiation and Ce(IV) redox polymerization using amino‐alcohol as the parent compound. In the first step, amino‐alcohol potassium with a protected amine group initiates the polymerization of ethylene oxide (EO) to yield poly(ethylene oxide) (PEO) with an amine end group (PEO‐NH₂), which is used to synthesize a PAN‐b‐PEO diblock copolymer with Ce(IV) that takes place in the redox initiation system. A PAN‐poly(ethylene glycol)‐PAN (PAN‐PEG‐PAN) triblock copolymer is prepared by the same redox system consisting of ceric ions and PEG in an aqueous medium. The structure of the copolymer is characterized in detail by GPC, IR, ¹H‐NMR, DSC, and X‐ray diffraction. The propagation of the PAN chain is dependent on the molecular weight and concentration of the PEO prepolymer. The crystallization of the PAN and PEO block is discussed. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 89: 1753–1759, 2003     

The preparation and characterization of high‐performance and thermally stable electroluminescent poly(p‐phenylene‐vinylene‐b‐oligoethylene oxide)

Two luminescent block copolymers (PPVPEO₂₀₀ and PPVPEO₆₀₀), composed of poly(p‐phenylene‐vinylene) (PPV) segments with three phenylene vinylene units and poly(ethylene oxide) (PEO) segments with molecular weight of 200 and 600, respectively, have been successfully synthesized. The structures of the copolymers were verified using FTIR, ¹H‐NMR, and elemental analysis. Single‐layer polymer light‐emitting electrochemical cells (LEC) devices fabricated on the bases of thin films of PPVPEO₆₀₀ and on the bases of thin films of blends of PPVPEO₂₀₀ with additional PEO both demonstrated good electroluminescent (EL) performance with the onset voltage of 2.6 V and EL efficiency of 0.64 cd/A and 0.68 cd/A at 3.2 V, respectively. Thermal analysis shows that the decomposition temperature of PPVPEO₆₀₀ is about 305°C, which is higher than that of PPVPEO₂₀₀ and PEO. AFM studies of PPVPEO₆₀₀ thin films exhibits that the block copolymer self‐assembles to form nanoscale network structures with pseudo‐cross‐linking points, thus accounting for its high thermal stability and good EL performance. © 2007 Wiley Periodicals, Inc. J Appl Polym Sci 104: 1118–1125, 2007