Nucleotide binding and phosphorylation in microtubule assembly in vitro.

Two non-hydrolyzable analogs of GTP, guanylyl-β,γ-methylene diphosphonate and guanylyl imidodiphosphate, have been found to induce rapid and efficient microtubule assembly in vitro by binding at the exchangeable site (E-site) on tubulin. Characterization of microtubule polymerization by several criteria, including polymerization kinetics, nucleotide binding to depolymerized and polymerized microtubules, and microtubule stability, reveals strong similarities between microtubule assembly induced by GTP and non-hydrolyzable GTP analogs. Nucleoside triphosphates which bind weakly or not at all to tubulin, such as ATP, UTP and CTP, are shown to induce microtubule assembly by means of a nucleoside diphosphate kinase (NDP-kinase, EC 2.7.4.6.) activity which is not intrinsic to tubulin. The NDP-kinase mediates microtubule polymerization by phosphorylating tubulin-bound GDP in situ at the E-site. Although hydrolysis of exchangeably bound GTP occurs, it is found to be uncoupled from the polymerization reaction. The non-exchangeable nucleotide binding site on tubulin (N-site) is not directly involved in microtubule assembly in vitro. The N-site is shown to contain almost exclusively GTP which is not hydrolyzed during microtubule assembly. A scheme is presented in which GTP acts as an allosteric effector at the E-site during microtubule assembly in vitro.     

Dephosphorylation of tubulin-bound guanosine triphosphate during microtubule assembly.

1. Tubulin purified from porcine brain in the presence of GTP contained 0.16 mole of GDP and 0.73 mole of GTP per 60,000 g of protein. 2. Microtubules reconstituted from the purified tubulin contained 0.43 mole of GDP and 0.41 mole of GTP per 60,000 g of protein. Guanine nucleotide bound to the exchangeable site of tubulin was converted to GDP during microtubule assembly, while GTP at the non-exchangeable site remained intact. 3. Guanine nucleotide which had been bound to the exchangeable site of tubulin before microtubule assembly was also exchangeable during disassembly.     

Tubulin exchanges divalent cations at both guanine nucleotide-binding sites

The tubulin heterodimer binds a molecule of GTP at the nonexchangeable nucleotide-binding site (N-site) and either GDP or GTP at the exchangeable nucleotide-binding site (E-site). Mg2+ is known to be tightly linked to the binding of GTP at the E-site (Correia, J. J., Baty, L. T., and Williams, R. C., Jr. (1987) J. Biol. Chem. 262, 17278-17284). Measurements of the exchange of Mn2+ for bound Mg2+ (as monitored by atomic absorption and EPR) demonstrate that tubulin which has GDP at the E-site possesses one high affinity metal-binding site and that tubulin which has GTP at the E-site possesses two such sites. The apparent association constants are 0.7-1.1 x 10(6) M-1 for Mg2+ and approximately 4.1-4.9 x 10(7) M-1 for Mn2+. Divalent cations do bind to GDP at the E-site, but with much lower affinity (2.0-2.3 x 10(3) M-1 for Mg2+ and 3.9-6.6 x 10(3) M-1 for Mn2+). These data suggest that divalent cations are involved in GTP binding to both the N- and E-sites of tubulin. The N-site metal exchanges slowly (kapp = 0.020 min-1), suggesting a mechanism involving protein "breathing" or heterodimer dissociation. The N-site metal exchange rate is independent of the concentration of protein and metal, an observation consistent with the possibility that a dynamic breathing process is the rate-limiting step. The exchange of Mn2+ for Mg2+ has no effect on the secondary structure of tubulin at 4 degrees C or on the ability of tubulin to form microtubules. These results have important consequences for the interpretation of distance measurements within the tubulin dimer using paramagnetic ions. They are also relevant to the detailed mechanism of divalent cation release from microtubules after GTP hydrolysis.     

Equilibrium studies of a fluorescent paclitaxel derivative binding to microtubules

A fluorescent derivative of paclitaxel, 3'-N-m-aminobenzamido-3'-N-debenzamidopaclitaxel (N-AB-PT), has been prepared in order to probe paclitaxel-microtubule interactions. Fluorescence spectroscopy was used to quantitatively assess the association of N-AB-PT with microtubules. N-AB-PT was found equipotent with paclitaxel in promoting microtubule polymerization. Paclitaxel and N-AB-PT underwent rapid exchange with each other on microtubules assembled from GTP-, GDP-, and GMPCPP-tubulin. The equilibrium binding parameters for N-AB-PT to microtubules assembled from GTP-tubulin were derived through fluorescence titration. N-AB-PT bound to two types of sites on microtubules (K(d1) = 61 +/- 7.0 nM and K(d2) = 3.3 +/- 0.54 microM). The stoichiometry of each site was less than one ligand per tubulin dimer in the microtubule (n(1) = 0.81 +/- 0.03 and n(2) = 0.44 +/- 0.02). The binding experiments were repeated after exchanging the GTP for GDP or for GMPCPP. It was found that N-AB-PT bound to a single site on microtubules assembled from GDP-tubulin with a dissociation constant of 2.5 +/- 0.29 microM, and that N-AB-PT bound to a single site on microtubules assembled from GMPCPP-tubulin with a dissociation constant of 15 +/- 4.0 nM. It therefore appears that microtubules contain two types of binding sites for paclitaxel and that the binding site affinity for paclitaxel depends on the nucleotide content of tubulin. It has been established that paclitaxel binding does not inhibit GTP hydrolysis and microtubules assembled from GTP-tubulin in the presence of paclitaxel contain almost exclusively GDP at the E-site. We propose that although all the subunits of the microtubule at steady state are the same "GDP-tubulin-paclitaxel", they are formed through two paths: paclitaxel binding to a tubulin subunit before its E-site GTP hydrolysis is of high affinity, and paclitaxel binding to a tubulin subunit containing hydrolyzed GDP at its E-site is of low affinity.     

GTP analogues interact with the tubulin exchangeable site during assembly and upon binding

The question of whether nonhydrolyzable nucleotide analogues and other nucleoside triphosphates support tubulin assembly was addressed. Tubulin which contained residual GTP at the exchangeable site polymerized in the absence of added GTP in the presence of DMSO or glycerol. After maximum absorbance was reached, disassembly occurred at a slow rate. When 0.5 mM GMPPCP, GMPPNP, or ATP was included in the assembly reaction, disassembly did not occur, and about 0.1 mol of these nucleotides per mole of tubulin was incorporated into the protein. When 5 mM nucleotide was used or alkaline phosphatase was included in the case of the nonhydrolyzable analogues, a greater amount of assembly occurred and about 0.7-0.8 mol of analogue was incorporated. The products of the assembly reaction were cold-labile microtubules and protofilament ribbons. After cold-depolymerization of the microtubules and ribbons, a second cycle of assembly produced some microtubules, but cold-stable amorphous polymers were the major product. In addition, when GTP at the exchangeable site was first removed by a cycle of assembly, followed by depolymerization, assembly in the presence of GMPPCP, GMPPNP, or ATP produced a mixture of microtubules and cold-stable polymers, both of which contained bound analogue. Incorporation of GMPPCP, GMPPNP, or ATP into polymerized tubulin always occurred at the expense of GDP at the exchangeable site, the content of which decreased correspondingly. Incubation of tubulin with 5 mM GMPPCP, GMPPNP, or ATP under nonassembly conditions also displaced GDP.(ABSTRACT TRUNCATED AT 250 WORDS)     

Tubulin-associated nucleoside diphosphokinase.

Microtubule protein, prepared by cycles of polymerisation and dissociation, contained a nucleoside diphosphokinase (NDP kinase) activity (EC 2.7.4.6). This activity was not intrinsic to the tubulin dimer or the so-called microtubule-associated proteins. The NDP kinase had the following properties. (1) The enzyme existed in a low-molecular-weight form and in association with the complex of microtubule-associated proteins and tubulin (i.e. multimeric tubulin). (2) The low-molecular-weight species was also formed by dissociation of multimeric tubulin by salt or by removal of microtubule-associated proteins on phosphocellulose. (3) GDP bound to the exchangeable site of multimeric tubulin and also GDP derived from the E site of the tubulin dimer was a substrate for the NDP kinase. (4) The NDP kinase showed a 7-fold increase in activity during ATP-dependent microtubule assembly. On the basis of these properties, it is proposed that microtubule protein contains an NDP kinase specifically associated with tubulin and its functions.     

Assembly of pure tubulin in the absence of free GTP: effect of magnesium, glycerol, ATP, and the nonhydrolyzable GTP analogues

We describe in vitro microtubule assembly that exhibits, in bulk solution, behavior consistent with the GTP cap model of dynamic instability. Microtubules assembled from pure tubulin in the absence of free nucleotides could undergo one cycle of assembly, but could not sustain an assembly plateau. After the initial peak of assembly was reached and bound E-site GTP hydrolyzed to GDP, the microtubules gradually disassembled. We studied buffer conditions that maximized this disassembly while still allowing robust assembly to take place. While both glycerol and glutamate increased the rate of initial assembly and then slowed disassembly, magnesium promoted initial assembly and, surprisingly, enhanced disassembly. After cooling, a second cycle of assembly was unsuccessful unless GTP or the hydrolyzable GTP analogue GMPCPOP was readded. The nonhydrolyzable GTP analogues GMPPNP and GMPPCP could not support the second assembly cycle in the absence of E-site GTP. Analysis using HPLC found no evidence that GMPPNP, GMPPCP, or ATP could bind to free tubulin, and these nucleotides did not compete with GTP for the E-site. We have, however, demonstrated that the nonhydrolyzable GTP analogues and ATP do have an important effect on microtubule assembly. GMPPNP, GMPPCP, and ATP could each enhance the rate of assembly and stabilize the plateau of assembled microtubules against disassembly, while not binding appreciably to free tubulin. We conclude that these nucleotides, as well as GTP itself, enhance assembly by binding to a site on microtubules that is not present on free, unpolymerized tubulin. We estimate the affinity (KD) of the polymeric site for nucleotide triphosphates to be approximately 10(-4)M.     

Evidence for a distinct ligand binding site on tubulin discovered through inhibition by GDP of paclitaxel-induced tubulin assembly in the absence of exogenous GTP

GDP inhibits paclitaxel-induced tubulin assembly without GTP when the tubulin bears GDP in the exchangeable site (E-site). Initially, we thought inhibition was mediated through the E-site, since small amounts of GTP or Mg²⁺, which favors GTP binding to the E-site, reduced inhibition by GDP. We thought trace GTP released from the nonexchangeable site (N-site) by tubulin denaturation was required for polymer nucleation, but microtubule length was unaffected by GDP. Further, enhancing polymer nucleation reduced inhibition by GDP. Other mechanisms involving the E-site were eliminated experimentally. Upon finding that ATP weakly inhibited paclitaxel-induced assembly, we concluded that another ligand binding site was responsible for these inhibitory effects, and we found that GDP was not binding at the taxoid, colchicine, or vinca sites. There may therefore be a lower affinity site on tubulin to which GDP can bind distinct from the E- and N-sites, possibly on α-tubulin, based on molecular modeling studies.     

Influence of Mg2+ and inorganic phosphates on the assembly of tubulin depleted of its exchangeable guanine nucleotide.

After the removal of the exchangeable guanine nucleotides by chromatography on phenyl-Sepharose [Hanssens, I., Baert, J., and Van Cauwelaert, F. (1990) Biochemistry 29, 5160-5165] tubulin polymerizations with GTP, GDP, tripolyphosphate, pyrophosphate or orthophosphate as possible stimulants are compared. It is demonstrated that, besides GTP and pyrophosphate, also tripolyphosphate stimulates the assembly into microtubules at high concentrations (4.65 mM) of Mg2+. The influence of Mg2+ is more pronounced in combination with pyrophosphate and tripolyphosphate than with GTP. The microtubules assembled in combination with Mg2+ and tripolyphosphate or pyrophosphate are short, suggesting that especially the nucleation step of microtubule assembly is favoured.     

Neurotubule assembly at substoichiometric nucleotide levels using a GTP regenerating system

Tubulin derived from cold depolymerized bovine microtubules has been gel filtered to obtain a tubulin preparation with only 3% of the tubulin dimers containing exchangeable [³H]-guanine nucleotide. In the presence of acetyl-P and bacterial acetate kinase, this preparation polymerizes to form microtubules which are morphologically indistinguishable from microtubules formed in the presence of excess GTP. The extent of microtubule formation at substoichiometric nucleotide levels using the GTP regenerating system exceeds the extent of assembly obtained with excess GTP. It is concluded that the exchangeable guanine nucleotide site can be virtually unoccupied in intact neurotubules and this finding indicates that GDP can “catalyze” tubule assembly in the presence of a GTP regenerating system.     

Incorporation of GDP-tubulin during elongation of microtubules in vitro

Removal of GDP from tubulin E-site is not obligatory for the in vitro assembly of microtubule protein in 0.5 mM GMPPCP. This assembly, which is significantly enhanced by glycerol, produces microtubules of normal morphology and with normal composition of microtubule-associated proteins (MAPs). [3H]-GDP initially present at the E-site is shown to be incorporated directly into microtubules during assembly; this incorporation, maximally 60% of the assembled polymer, is dependent upon MAPs. These results are consistent with oligomeric species composed principally of GDP-tubulin plus MAPs, being incorporated directly into microtubules. The finding that stoichiometric GTP-tubulin formation is not an essential prerequisite for microtubule assembly may have important implications for the energetics of microtubule formation.     

Effects of pH on tubulin-nucleotide interactions

Significant GTP-independent, temperature-dependent turbidity development occurs with purified tubulin stored in the absence of unbound nucleotide, and this can be minimized with a higher reaction pH. Since microtubule assembly is optimal at lower pH values, we examined pH effects on tubulin-nucleotide interactions. While the lowest concentration of GTP required for assembly changed little, GDP was more inhibitory at higher pH values. The amounts of exogenous GTP bound to tubulin at all pH values were similar, but the amounts of exogenous GDP bound and endogenous GDP (i.e., GDP originally bound in the exchangeable site) retained by tubulin rose as reaction pH increased. Endogenous GDP was more efficiently displaced by exogenous GTP than GDP at all pH values, but displacement by GTP was 10-15% greater at pH 6 than at pH 7. Dissociation constants for GDP and GTP were about 1.0 microM at pH 6 and 0.02 microM at pH 7. A small increase in the affinity of GDP relative to that of GTP occurs at pH 7 as compared to pH 6, together with a 50-fold absolute increase in the affinity of both nucleotides for tubulin at pH 7. The time courses of microtubule assembly and GTP hydrolysis were compared at pH 6 and pH 7. At pH 6, the two reactions were simultaneous in onset and initially stoichiometric. At pH 7, although the reactions began simultaneously, hydrolysis seemed to lag substantially behind assembly. Unhydrolyzed radiolabeled GTP was not incorporated into microtubules, however, indicating that GTP hydrolysis is actually closely coupled to assembly. The apparent lag in hydrolysis probably results from a methodological artifact rather than incorporation of GTP into the microtubule with delayed hydrolysis.     

Stoichiometry and role of GTP hydrolysis in bovine neurotubule assembly

A method is given for preparing tubulin with 1 mol of exchangeably bound [gamma-32P]GTP/mol of 6 S dimer. Bovine tubulin is shown to hydrolyze 1 mol of GTP/mol of 6 S dimer added to assembling microtubules at 37 degrees. Hydrolysis and assembly occur at the same rate and to the same extent. When microtubule-associated proteins (MAPs) are removed, both hydrolysis and assembly fail to occur. Readdition of the MAPs restores both activities. Tubulin with exchangeable GDP will co-assemble with GTP.tubulin even at equimolar levels. Exchangeability is demonstrated by pulse-chase experiments with GDP or GTP. GDP is also a potent inhibitor of assembly under these conditions, and the rate of assembly is reduced by 50% at 10 micron GDP. One mole of inorganic phosphate is released to the solvent per mole of exchangeable GTP hydrolyzed. An assembly mechanism is proposed in which exchangeable GTP is hydrolyzed without intermediate transphosphorylation of nonexchangeable GDP.     

Evidence that the tightly bound magnesium in tubulin is associated with the N-site GTP

In an attempt to determine whether the tightly bound Mg2+ found in purified tubulin in associated with the N-site GTP or the E-site GDP or GTP, we removed the E-site nucleotide by several means: (i) alkaline phosphatase treatment; (ii) displacement using excess GMPPCP; and (iii) polymerizing tubulin in the presence of alkaline phosphatase and non-hydrolyzable analogues. The Mg2+ content remained equal to about 1 mol/mol tubulin under conditions where denaturation did not occur. Moreover, the Mg/GTP ratio always remained equal to 1. These results indicate that the Mg2+ is associated with the N-site GTP.     

Direct incorporation of guanosine 5'-diphosphate into microtubules without guanosine 5'-triphosphate hydrolysis

Using highly purified calf brain tubulin bearing [8-14C]guanosine 5'-diphosphate (GDP) in the exchangeable nucleotide site and heat-treated microtubule-associated proteins (both components containing negligible amounts of nucleoside diphosphate kinase and nonspecific phosphatase activities), we have found that a significant proportion of exchangeable-site GDP in microtubules can be incorporated directly during guanosine 5'-triphosphate (GTP) dependent polymerization of tubulin, without an initial exchange of GDP for GTP and subsequent GTP hydrolysis during assembly. The precise amount of GDP incorporated directly into microtubules is highly dependent on specific reaction conditions, being favored by high tubulin concentrations, low GTP and Mg2+ concentrations, and exogenous GDP in the reaction mixture. Minimum effects were observed with changes in reaction pH or temperature, changes in concentration of microtubule-associated proteins, alteration of the sulfonate buffer, or the presence of a calcium chelator in the reaction mixture. Under conditions most favorable for direct GDP incorporation, about one-third of the GDP in microtubules is incorporated directly (without GTP hydrolysis) and two-thirds is incorporated hydrolytically (as a consequence of GTP hydrolysis). Direct incorporation of GDP occurs in a constant proportion throughout elongation, and the amount of direct incorporation probably reflects the rapid equilibration of GDP and GTP at the exchangeable site that occurs before the onset of assembly.     

Binding of guanine nucleotides and Mg2+ to tubulin with a nucleotide-depleted exchangeable site

Binding of GTP and GDP to tubulin in the presence or absence of Mg2+ was measured following depletion of the exchangeable site--(E-site) nucleotide. The E-site nucleotide was displaced with a large molar excess of the nonhydrolyzable GTP analogue, GMPPCP, followed by the removal of the analogue. Using a micropartition assay, the equilibrium constant measured in 0.1 M 1.4-piperazinediethanesulfonic acid (Pipes), pH 6.9, 1 mM ethylene glycol bis(beta-aminoethyl ether) N,N,N',N'-tetraacetic acid, 1 mM dithiothreitol, and 1 mM MgSO4 at 4 degrees C was 9.1 x 10(6) M-1 for GTP and 4.4 x 10(6) M-1 for GDP. Removal of Mg2+ reduced the binding affinity of GTP by 160-fold while the affinity of GDP remained essentially unchanged. Similar values were obtained if 0.1 M Tris, pH 7.0, was used instead of Pipes. Binding of Mg2+ to tubulin containing GTP, GDP, or no nucleotide at the E-site was also examined by the micropartition method. Tubulin-GTP contained one high affinity Mg2+ site (K alpha = 1.2 x 10(6) M-1) in addition to the one occupied by Mg2+ as tubulin is isolated, while only weak Mg2+ binding to tubulin-GDP and to tubulin with a vacant E-site (K alpha = 10(3) M-1) was observed. It is suggested that Mg2+ binds to the beta and gamma phosphates of GTP, and only to the beta phosphate of GDP, as shown for the H. ras p21 protein.     

Mechanism of the microtubule GTPase reaction

The rate of GTP hydrolysis by microtubules has been measured at tubulin subunit concentrations where microtubules undergo net disassembly. This was made possible by using microtubules stabilized against disassembly by reaction with ethylene glycol bis-(succinimidylsuccinate) (EGS) as sites for the addition of tubulin-GTP subunits. The tubulin subunit concentration was varied from 25 to 90% of the steady state concentration, and there was no net elongation of stabilized microtubule seeds. The GTPase rate with EGS microtubules was linearly proportional to the tubulin-GTP subunit concentration when this concentration was varied by dilution and by using GDP to compete with GTP for the tubulin E-site. The linear dependence of the rate is consistent with a GTP mechanism in which hydrolysis is coupled to the tubulin-GTP subunit addition to microtubule ends. It is inconsistent with reaction schemes in which: microtubules are capped by a single tubulin-GTP subunit, which hydrolyzes GTP when a tubulin-GTP subunit adds to the end; hydrolysis occurs primarily in subunits at the interface of a tubulin-GTP cap and the tubulin-GDP microtubule core; hydrolysis is not coupled to subunit addition and occurs randomly in subunits in a tubulin-GTP cap. It was also found that GDP inhibition of the microtubule GTPase rate results from GDP competition for GTP at the tubulin subunit E-site. There is no additional effect of GDP on the GTPase rate resulting from exchange into tubulin subunits at microtubule ends.     

Binding of glycerol by microtubule protein.

When microtubules are purified by polymerization and depolymerization in a buffer containing glycerol, some glycerol becomes bound to the microtubule protein and is not removable by gel filtration or by prolonged dialysis. Both 6s tubulin and larger aggregates containing tubulin and accessory proteins bind glycerol. The 6s fraction has associated with it about 5 moles of glycerol per mole of tubulin dimer; 3 moles are exchangeable upon polymerization-depolymerization and 2 moles are not. The aggregate fraction has associated with it about 22 moles of glycerol per mole of tubulin dimer; approximately 11 moles are exchangeable and 11 moles are not.     

Promotion of tubulin assembly by poorly soluble taxol analogs

Promotion or inhibition of tubulin assembly into microtubules is the standard in vitro assay for evaluating potential antimicrotubule agents. Many agents to be tested are poorly soluble in aqueous solution and require a cosolvent such as dimethyl sulfoxide (DMSO). However, DMSO itself can promote tubulin assembly, and its inclusion in assays for compounds that induce tubulin assembly complicates interpretation of the results. Substituting GDP for GTP in the exchangeable nucleotide binding site of tubulin produces a less active form of the protein, tubulin-GDP. Here it is shown that tubulin-GDP can be assembled into normal microtubules in DMSO concentrations up to 15% (v/v), and polymerization assays performed under these conditions can be compared with assays run under more standard conditions. Assays for measuring the effective concentration of a ligand for promotion of tubulin assembly (EC(50)), measuring the concentration for inhibition of tubulin assembly (IC(50)) by a colchicine site ligand, and measuring tubulin critical concentrations in the presence of poorly soluble taxol derivatives are illustrated.     

Role of GTP hydrolysis in microtubule dynamics: information from a slowly hydrolyzable analogue, GMPCPP.

The role of GTP hydrolysis in microtubule dynamics has been reinvestigated using an analogue of GTP, guanylyl-(alpha, beta)-methylene-diphosphonate (GMPCPP). This analogue binds to the tubulin exchangeable nucleotide binding site (E-site) with an affinity four to eightfold lower than GTP and promotes the polymerization of normal microtubules. The polymerization rate of microtubules with GMPCPP-tubulin is very similar to that of GTP-tubulin. However, in contrast to microtubules polymerized with GTP, GMPCPP-microtubules do not depolymerize rapidly after isothermal dilution. The depolymerization rate of GMPCPP-microtubules is 0.1 s-1 compared with 500 s-1 for GDP-microtubules. GMPCPP also completely suppresses dynamic instability. Contrary to previous work, we find that the beta--gamma bond of GMPCPP is hydrolyzed extremely slowly after incorporation into the microtubule lattice, with a rate constant of 4 x 10(-7) s-1. Because GMPCPP hydrolysis is negligible over the course of a polymerization experiment, it can be used to test the role of hydrolysis in microtubule dynamics. Our results provide strong new evidence for the idea that GTP hydrolysis by tubulin is not required for normal polymerization but is essential for depolymerization and thus for dynamic instability. Because GMPCPP strongly promotes spontaneous nucleation of microtubules, we propose that GTP hydrolysis by tubulin also plays the important biological role of inhibiting spontaneous microtubule nucleation.