Utilization of a ZnS(en)0.5 photocatalyst hybridized with a CdS component for solar energy conversion to hydrogen

Photocatalytic solar energy conversion to chemical energy attracts great attention due to its high potential in harvesting renewable energy for the future. A ZnS(en)_0.5 photocatalyst hybridized with a CdS component was synthesized by solvothermal and precipitation methods to compare the effect of preparation methods on photocatalytic performance. The highest hydrogen production rate (559 μmol g^?1 h^?1) was achieved from a solvothermally synthesized ZnS(en)_0.5?CdS composite at 80 wt% of CdS content under standard 1-sun-irradiation condition (1000 W/m²). Photocatalytic hydrogen production rates from ZnS(en)_0.5?CdS photocatalysts were highly associated with degrees of charge separation, crystallinity, reduction power, and light absorption. By comparing two different routes for the synthesis of ZnS(en)_0.5?CdS photocatalysts, solvothermally-fabricated material was shown to have a higher photocatalytic activity compared with material fabricated by a precipitation method. This improvement may be due to its excellent crystalline and charge-separation characteristics.     

Nonepitaxial Gold‐Tipped ZnSe Hybrid Nanorods for Efficient Photocatalytic Hydrogen Production

For the first time, colloidal gold (Au)–ZnSe hybrid nanorods (NRs) with controlled size and location of Au domains are synthesized and used for hydrogen production by photocatalytic water splitting. Au tips are found to grow on the apices of ZnSe NRs nonepitaxially to form an interface with no preference of orientation between Au(111) and ZnSe(001). Density functional theory calculations reveal that the Au tips on ZnSe hybrid NRs gain enhanced adsorption of H compared to pristine Au, which favors the hydrogen evolution reaction. Photocatalytic tests reveal that the Au tips on ZnSe NRs effectively enhance the photocatalytic performance in hydrogen generation, in which the single Au‐tipped ZnSe hybrid NRs show the highest photocatalytic hydrogen production rate of 437.8 µmol h^?1 g^?1 in comparison with a rate of 51.5 µmol h^?1 g^?1 for pristine ZnSe NRs. An apparent quantum efficiency of 1.3% for hydrogen evolution reaction for single Au‐tipped ZnSe hybrid NRs is obtained, showing the potential application of this type of cadmium (Cd)‐free metal–semiconductor hybrid nanoparticles (NPs) in solar hydrogen production. This work opens an avenue toward Cd‐free hybrid NP‐based photocatalysis for clean fuel production.     

Low‐Energy Facets on CdS Allomorph Junctions with Optimal Phase Ratio to Boost Charge Directional Transfer for Photocatalytic H2 Fuel Evolution

Low‐energy facets on CdS allomorph junctions with optimal phase ratio are designed to boost charge directional transfer for photocatalytic H₂ fuel evolution. Fermi energy level difference between low‐energy facets as driving force promotes electrons directional transfer to hexagonal CdS(102) facet and holes to cubic CdS(111) facet. The optimal allomorphs CdS presents superior photocatalytic H₂ evolution rate of 32.95 mmol g^?1 h^?1 with release in a large amount of visible H₂ bubbles, which is much higher than single‐phase CdS with high‐energy facets and even supports noble metal photocatalysts. This scientific perspective on low‐energy facets of allomorph junctions with optimal phase ratio breaks the long‐held view of pursuing high‐energy crystal surfaces, which will break the understanding on surface structure crystal facet engineering of photocatalytic materials.     

Enhanced Photocatalytic H2‐Production Activity of CdS Quantum Dots Using Sn2+ as Cocatalyst under Visible Light Irradiation

Herein, oil‐soluble CdS quantum dots (QDs) are first prepared through a solvent‐thermal process. Then, oil‐soluble CdS QDs are changed into water‐soluble QDs via ligand exchange using mercaptopropionic acid as capping agent at pH 13. The photocatalytic performance is investigated under the visible light irradiation using glycerol as sacrificial agent and Sn²⁺ as cocatalyst. No H₂‐production activity is observed for oil‐soluble CdS QDs. Water‐soluble CdS QDs exhibit significantly enhanced hydrogen evolution rate. When the concentration of cocatalyst Sn²⁺ increases to 0.2 × 10^?3 m , the rate of hydrogen evolution reaches 1.61 mmol g^?1 h^?1, which is 24 times higher than that of the pristine water‐soluble CdS QDs. The enhanced H₂‐production efficiency is attributed to the adsorption of Sn²⁺ ions on the surface of CdS QDs that are further reduced to Sn atoms by photogenerated electrons. The in situ generated Sn atoms serve as photocatalytic cocatalyst for efficient hydrogen generation.     

Oxygen‐Vacancy‐Introduced BaSnO3−δ Photoanodes with Tunable Band Structures for Efficient Solar‐Driven Water Splitting

To achieve excellent photoelectrochemical water‐splitting activity, photoanode materials with high light absorption and good charge‐separation efficiency are essential. One effective strategy for the production of materials satisfying these requirements is to adjust their band structure and corresponding bandgap energy by introducing oxygen vacancies. A simple chemical reduction method that can systematically generate oxygen vacancies in barium stannate (BaSnO₃ (BSO)) crystal is introduced, which thus allows for precise control of the bandgap energy. A BSO photoanode with optimum oxygen‐vacancy concentration (8.7%) exhibits high light‐absorption and good charge‐separation capabilities. After deposition of FeOOH/NiOOH oxygen evolution cocatalysts on its surface, this photoanode shows a remarkable photocurrent density of 7.32 mA cm^?2 at a potential of 1.23 V versus a reversible hydrogen electrode under AM1.5G simulated sunlight. Moreover, a tandem device constructed with a perovskite solar cell exhibits an operating photocurrent density of 6.84 mA cm^?2 and stable gas production with an average solar‐to‐hydrogen conversion efficiency of 7.92% for 100 h, thus functioning as an outstanding unbiased water‐splitting system.     

Constructing Built‐in Electric Field in Ultrathin Graphitic Carbon Nitride Nanosheets by N and O Codoping for Enhanced Photocatalytic Hydrogen Evolution Activity

Codoping of N and O in ultrathin graphitic carbon nitride (g‐C₃N₄) nanosheets leads to an inner electric field. This field restrains the recombination of photogenerated carriers and, thus, enhances hydrogen evolution. The layered structure of codoped g‐C₃N₄ nanosheets (N‐O‐CNNS) not only provides abundant sites of contact with the reaction medium, but also decreases the distance over which the photogenerated electron–hole pairs are transported to the reaction interface. Quantum confinement in the ultrathin structure results in an increased bandgap and makes the photocatalytic reaction more favorable than bulk g‐C₃N₄. Under visible light irradiation, N‐O‐CNNS with 3 wt% Pt achieves a hydrogen evolution rate of 9.2 mmol g^?1 h^?1 and a value of 46.9 mmol g^?1 h^?1 under AM1.5 with 5 wt% Pt. Thus, this work paves the way for designing efficient nanostructures with increased separation/transfer efficiency of photogenerated carriers and, hence, increased photocatalytic activities.     

Cobalt Phosphide Modified Titanium Oxide Nanophotocatalysts with Significantly Enhanced Photocatalytic Hydrogen Evolution from Water Splitting

Production of hydrogen from photocatalytic water splitting holds promise as an alternative energy source with superiority of cleanliness, environment friendliness, low price, and sustainability. Perfectly constructing the noble‐metal‐free and stable hybrid structure photocatalyst is quite essential; herein, for the first time the authors aim to use cobalt phosphide as the cocatalyst on titanium oxide to form a novel hybrid structure to enhance the utilization of the photoexcited electrons in redox reactions for improved photocatalytic H₂ evolution activity. Thus, the achieved significantly increased photocatalytic H₂‐evolution rate on the optimized CoP/TiO₂ (8350 µmol h^?1 g^?1) is 11 times higher than that of the pristine TiO₂. Moreover, this work is expected to spur more insight into synthesizing such novel photofunctional systems, achieving high photocatalytic H₂ evolution activity and sufficient stability for solar‐to‐chemical conversion and utilization.     

From UV to Near‐Infrared Light‐Responsive Metal–Organic Framework Composites: Plasmon and Upconversion Enhanced Photocatalysis

The exploitation of photocatalysts that harvest solar spectrum as broad as possible remains a high‐priority target yet grand challenge. In this work, for the first time, metal–organic framework (MOF) composites are rationally fabricated to achieve broadband spectral response from UV to near‐infrared (NIR) region. In the core–shell structured upconversion nanoparticles (UCNPs)‐Pt@MOF/Au composites, the MOF is responsive to UV and a bit visible light, the plasmonic Au nanoparticles (NPs) accept visible light, whereas the UCNPs absorb NIR light to emit UV and visible light that are harvested by the MOF and Au once again. Moreover, the MOF not only facilitates the generation of “bare and clean” Au NPs on its surface and realizes the spatial separation for the Au and Pt NPs, but also provides necessary access for catalytic substrates/products to Pt active sites. As a result, the optimized composite exhibits excellent photocatalytic hydrogen production activity (280 µmol g^?1 h^?1) under simulated solar light, and the involved mechanism of photocatalytic H₂ production under UV, visible, and NIR irradiation is elucidated. Reportedly, this is an extremely rare study on photocatalytic H₂ production by light harvesting in all UV, visible, and NIR regions.     

A Self‐Assembled DNA Origami‐Gold Nanorod Complex for Cancer Theranostics

A self‐assembled DNA origami (DO)‐gold nanorod (GNR) complex, which is a dual‐functional nanotheranostics constructed by decorating GNRs onto the surface of DNA origami, is demonstrated. After 24 h incubation of two structured DO‐GNR complexes with human MCF7 breast cancer cells, significant enhancement of cell uptake is achieved compared to bare GNRs by two‐photon luminescence imaging. Particularly, the triangle shaped DO‐GNR complex exhibits optimal cellular accumulation. Compared to GNRs, improved photothermolysis against tumor cells is accomplished for the triangle DO‐GNR complex by two‐photon laser or NIR laser irradiation. Moreover, the DO‐GNR complex exhibits enhanced antitumor efficacy compared with bare GNRs in nude mice bearing breast tumor xenografts. The results demonstrate that the DO‐GNR complex can achieve optimal two‐photon cell imaging and photothermal effect, suggesting a promising candidate for cancer diagnosis and therapy both in vitro and in vivo.     

A Hierarchical Z‐Scheme CdS–WO3 Photocatalyst with Enhanced CO2 Reduction Activity

The development of an artificial photosynthetic system is a promising strategy to convert solar energy into chemical fuels. Here, a direct Z‐scheme CdS–WO₃ photocatalyst without an electron mediator is fabricated by imitating natural photosynthesis of green plants. Photocatalytic activities of as‐prepared samples are evaluated on the basis of photocatalytic CO₂ reduction to form CH₄ under visible light irradiation. These Z‐scheme‐heterostructured samples show a higher photocatalytic CO₂ reduction than single‐phase photocatalysts. An optimized CdS–WO₃ heterostructure sample exhibits the highest CH₄ production rate of 1.02 μmol h^?1 g^?1 with 5 mol% CdS content, which exceeds the rates observed in single‐phase WO₃ and CdS samples for approximately 100 and ten times under the same reaction condition, respectively. The enhanced photocatalytic activity could be attributed to the formation of a hierarchical direct Z‐scheme CdS–WO₃ photocatalyst, resulting in an efficient spatial separation of photo‐induced electron–hole pairs. Reduction and oxidation catalytic centers are maintained in two different regions to minimize undesirable back reactions of the photocatalytic products. The introduction of CdS can enhance CO₂ molecule adsorption, thereby accelerating photocatalytic CO₂ reduction to CH₄. This study provides novel insights into the design and fabrication of high‐performance artificial Z‐scheme photocatalysts to perform photocatalytic CO₂ reduction.     

Superior Photocatalytic H2 Production with Cocatalytic Co/Ni Species Anchored on Sulfide Semiconductor

Downsizing transition metal‐based cocatalysts on semiconductors to promote photocatalytic efficiency is important for research and industrial applications. This study presents a novel and facile strategy for anchoring well‐dispersed metal species on CdS surface through controlled decarboxylation of the ethylenediaminetetraacetate (EDTA) ligand in the metal–EDTA (M–EDTA) complex and CdS mixture precursor to function as a cocatalyst in the photocatalytic H₂ evolution. Microstructure characterization and performance evaluation reveal that under visible light the resulting pentacoordinated Co(II) and hexacoordinated Ni(II) on CdS exhibits a high activity of 3.1 mmol h^?1 (with turnover frequency (TOF) of 626 h^?1 and apparent quantum efficiency (AQE) of 56.2% at 420 nm) and 4.3 mmol h^?1 (with TOF of 864 h^?1 and AQE of 67.5% at 420 nm), respectively, toward cocatalytic hydrogen evolution, and the cocatalytic activity of such a hexacoordinated Ni(II) even exceeds that of platinum. Further mechanistic study and theoretical modeling indicate that the fully utilized Co(II)/Ni(II) active sites, efficient charge transfer, and favorable kinetics guarantee the efficient activities. This work introduces a promising precursor, i.e., M–EDTA for planting well‐dispersed transition metal species on the sulfide supports by a facile wet‐chemistry approach, providing new opportunities for photocatalytic H₂ production at the atomic/molecular scale.     

Nanoconfined Nickel@Carbon Core–Shell Cocatalyst Promoting Highly Efficient Visible‐Light Photocatalytic H2 Production

The realization of large‐scale solar hydrogen (H₂) production relies on the development of high‐performance and low‐cost photocatalysts driven by sunlight. Recently, cocatalysts have demonstrated immense potential in enhancing the activity and stability of photocatalysts. Hence, the rational design of highly active and inexpensive cocatalysts is of great significance. Here, a facile method is reported to synthesize Ni@C core–shell nanoparticles as a highly active cocatalyst. After merging Ni@C cocatalyst with CdS nanorod (NR), a tremendously enhanced visible‐light photocatalytic H₂‐production performance of 76.1 mmol g^?1 h^?1 is achieved, accompanied with an outstanding quantum efficiency of 31.2% at 420 nm. The state‐of‐art characterizations (e.g., synchrotron‐based X‐ray absorption near edge structure) and theoretical calculations strongly support the presence of pronounced nanoconfinement effect in Ni@C core–shell nanoparticles, which leads to controlled Ni core size, intimate interfacial contact and rapid charge transfer, optimized electronic structure, and protection against chemical corrosion. Hence, the combination of nanoconfined Ni@C with CdS nanorod leads to significantly improved photocatalytic activity and stability. This work not only for the first time demonstrates the great potential of using highly active and inexpensive Ni@C core–shell structure to replace expensive Pt in photocatalysis but also opens new avenues for synthesizing cocatalyst/photocatalyst hybridized systems with excellent performance by introducing nanoconfinement effect.     

Dielectric‐Screening Reduction‐Induced Large Transport Gap in Suspended Sub‐10 nm Graphene Nanoribbon Functional Devices

The predicted quasiparticle energy gap of more than 1 eV in sub‐6 nm graphene nanoribbons (GNRs) is elusive, as it is strongly suppressed by the substrate dielectric screening. The number of techniques that can produce suspended high‐quality and electrically contacted GNRs is small. The helium ion beam milling technique is capable of achieving sub‐5 nm patterning; however, the functional device fabrication and the electrical characteristics are not yet reported. Here, the electrical transport measurement of suspended ≈6 nm wide mono‐ and bilayer GNR functional devices is reported, which are obtained through sub‐nanometer resolution helium ion beam milling with controlled total helium ion budget. The transport gap opening of 0.16–0.8 eV is observed at room temperature. The measured transport gap of the different edge orientated GNRs is in good agreement with first‐principles simulation results. The enhanced electron–electron interaction and reduced dielectric screening in the suspended quasi‐1D GNRs and anti‐ferromagnetic coupling between opposite edges in the zigzag GNRs substantiate the observed large transport gap.     

Creating Graphitic Carbon Nitride Based Donor‐π–Acceptor‐π–Donor Structured Catalysts for Highly Photocatalytic Hydrogen Evolution

Conjugated polymers with tailored donor–acceptor units have recently attracted considerable attention in organic photovoltaic devices due to the controlled optical bandgap and retained favorable separation of charge carriers. Inspired by these advantages, an effective strategy is presented to solve the main obstructions of graphitic carbon nitride (g‐C₃N₄) photocatalyst for solar energy conversion, that is, inefficient visible light response and insufficient separation of photogenerated electrons and holes. Donor‐π–acceptor‐π–donor polymers are prepared by incorporating 4,4′‐(benzoc 1,2,5 thiadiazole‐4,7‐diyl) dianiline (BD) into the g‐C₃N₄ framework (UCN‐BD). Benefiting from the visible light band tail caused by the extended π conjugation, UCN‐BD possesses expanded visible light absorption range. More importantly, the BD monomer also acts as an electron acceptor, which endows UCN‐BD with a high degree of intramolecular charge transfer. With this unique molecular structure, the optimized UCN‐BD sample exhibits a superior performance for photocatalytic hydrogen evolution upon visible light illumination (3428 µmol h^?1 g^?1), which is nearly six times of that of the pristine g‐C₃N₄. In addition, the photocatalytic property remains stable for six cycles in 3 d. This work provides an insight into the synthesis of g‐C₃N₄‐based D‐π–A‐π–D systems with highly visible light response and long lifetime of intramolecular charge carriers for solar fuel production.     

Nanogap Engineered Plasmon‐Enhancement in Photocatalytic Solar Hydrogen Conversion

Graphitic carbon nitride modified with plasmonic Ag@SiO₂ core–shell nanoparticles (g‐C₃N₄/Ag@SiO₂) are proposed for enhanced photocatalytic solar hydrogen evolution under visible light. Nanosized gaps between the plasmonic Ag nanoparticles (NPs) and g‐C₃N₄ are created and precisely modulated to be 8, 12, 17, and 21 nm by coating SiO₂ shells on the Ag NPs. The optimized photocatalytic hydrogen production activity for g‐C₃N₄/Ag@SiO₂ is achieved with a nanogap of 12 nm (11.4 μmol h⁻¹) to be more than twice as high as that of pure g‐C₃N₄ (5.6 μmol h⁻¹). The plasmon resonance energy transfer (PRET) effect of Ag NPs is innovatively proved from a physical view on polymer semiconductors for photoredox catalysis. The PRET effect favors the charge carrier separation by inducing electron–hole pairs efficiently formed in the near‐surface region of g‐C₃N₄. Furthermore, via engineering the width of the nanogap, the PRET and energy‐loss Förster resonance energy transfer processes are perfectly balanced, resulting in considerable enhancement of photocatalytic hydrogen production activity over the g‐C₃N₄/Ag@SiO₂ plasmonic photocatalyst.     

Boosting Zn‐Ion Energy Storage Capability of Hierarchically Porous Carbon by Promoting Chemical Adsorption

The construction of advanced Zn‐ion hybrid supercapacitors (ZHSCs) with high energy density is promising but still challenging, especially at high current densities. In this work, a high‐energy and ultrastable aqueous ZHSC is demonstrated by introducing N dopants into a hierarchically porous carbon cathode for the purpose of enhancing its chemical adsorption of Zn ions. Experimental results and theoretical simulations reveal that N doping not only significantly facilitates the chemical adsorption process of Zn ions, but also greatly increases its conductivity, surface wettability, and active sites. Consequently, the as‐fabricated aqueous ZHSC based on this N‐doped porous carbon cathode displays an exceptionally high energy density of 107.3 Wh kg^?1 at a high current density of 4.2 A g^?1, a superb power density of 24.9 kW kg^?1, and an ultralong‐term lifespan (99.7% retention after 20 000 cycles), substantially superior to state‐of‐the‐art ZHSCs. Particularly, such a cathode also leads to a quasi‐solid‐state device with satisfactory energy storage performance, delivering a remarkable energy density of 91.8 Wh kg^?1. The boosted energy storage strategy by tuning the chemical adsorption capability is also applicable to other carbon materials.     

Dibenzothiophene‐S,S‐Dioxide‐Based Conjugated Polymers: Highly Efficient Photocatalyts for Hydrogen Production from Water under Visible Light

Three dibenzothiophene‐S,S‐dioxide‐based alternating copolymers were synthesized by facile Suzuki polymerization for visible light–responsive hydrogen production from water (> 420 nm). Without addition of any cocatalyst, FluPh2‐SO showed a photocatalytic efficiency of 3.48 mmol h^?1 g?¹, while a larger hydrogen evolution rate (HER) of 4.74 mmol h^?1 g^?1 was achieved for Py‐SO, which was ascribed to the improved coplanarity of the polymer that facilitated both intermolecular packing and charge transport. To minimize the possible steric hindrance of FluPh2‐SO by replacing 9,9′‐diphenylfluorene with fluorene, Flu‐SO exhibited a more red‐shifted absorption than FluPh2‐SO and yielded the highest HER of 5.04 mmol h^?1 g^?1. This work highlights the potential of dibenzothiophene‐S,S‐dioxide as a versatile building block and the rational design strategy for achieving high photocatalytic efficiency.     

Interlayer Hydrogen‐Bonded Metal Porphyrin Frameworks/MXene Hybrid Film with High Capacitance for Flexible All‐Solid‐State Supercapacitors

2D metal‐porphyrin frameworks (MPFs) are attractive for advanced energy storage devices. However, the inferior conductivity and low structural stability of MPFs seriously limit their application as flexible free‐standing electrodes with high performance. Here, for the first time, an interlayer hydrogen‐bonded MXene/MPFs film is proposed to overcome these disadvantages by intercalation of highly conductive MXene nanosheets into MPFs nanosheets via a vacuum‐assisted filtration technology. The alternant insertion of MXene and MPFs affords 3D interconnected “MPFs‐to‐MXene‐to‐MPFs” conductive networks to accelerate the ionic/electronic transport rates. Meanwhile, the interlayer hydrogen bonds (F···H? O and O···H? O) contribute a high chemical stability due to a favorable tolerance to volume change caused by phase separation and structural collapse during the charge/discharge process. The synergistic effect makes MXene/MPFs film deliver a capacitance of 326.1 F g^?1 at 0.1 A g^?1, 1.64 F cm^?2 at 1 mA cm^?2, 694.2 F cm^?3 at 1 mA cm^?3 and a durability of about 30 000 cycles. The flexible symmetric supercapacitor shows an areal capacitance of 408 mF cm^?2, areal energy density of 20.4 µW h cm^?2, and capacitance retention of 95.9% after 7000 cycles. This work paves an avenue for the further exploration of 2D MOFs in flexible energy storage devices.     

Polyaniline Derived N‐Doped Carbon‐Coated Cobalt Phosphide Nanoparticles Deposited on N‐Doped Graphene as an Efficient Electrocatalyst for Hydrogen Evolution Reaction

The development of highly efficient and durable non‐noble metal electrocatalysts for the hydrogen evolution reaction (HER) is significant for clean and renewable energy research. This work reports the synthesis of N‐doped graphene nanosheets supported N‐doped carbon coated cobalt phosphide (CoP) nanoparticles via a pyrolysis and a subsequent phosphating process by using polyaniline. The obtained electrocatalyst exhibits excellent electrochemical activity for HER with a small overpotential of ?135 mV at 10 mA cm^?2 and a low Tafel slope of 59.3 mV dec^?1 in 0.5 m H₂SO₄. Additionally, the encapsulation of N‐doped carbon shell prevents CoP nanoparticles from corrosion, exhibiting good stability after 14 h operation. Moreover, the as‐prepared electrocatalyst also shows outstanding activity and stability in basic and neutral electrolytes.     

Enhanced Solar‐to‐Hydrogen Generation with Broadband Epsilon‐Near‐Zero Nanostructured Photocatalysts

The direct conversion of solar energy into fuels or feedstock is an attractive approach to address increasing demand of renewable energy sources. Photocatalytic systems relying on the direct photoexcitation of metals have been explored to this end, a strategy that exploits the decay of plasmonic resonances into hot carriers. An efficient hot carrier generation and collection requires, ideally, their generation to be enclosed within few tens of nanometers at the metal interface, but it is challenging to achieve this across the broadband solar spectrum. Here the authors demonstrate a new photocatalyst for hydrogen evolution based on metal epsilon‐near‐zero metamaterials. The authors have designed these to achieve broadband strong light confinement at the metal interface across the entire solar spectrum. Using electron energy loss spectroscopy, the authors prove that hot carriers are generated in a broadband fashion within 10 nm in this system. The resulting photocatalyst achieves a hydrogen production rate of 9.5 µmol h^?1 cm^?2 that exceeds, by a factor of 3.2, that of the best previously reported plasmonic‐based photocatalysts for the dissociation of H₂ with 50 h stable operation.