Perylene and naphthalene diimide copolymers for all-polymer solar cells: Effect of perylene/naphthalene ratio

We report the synthesis of a series of copolymers, having 2,2′-bithiophene as electron-donating moiety, and perylene diimide (PDI) and/or naphthalene diimide (NDI) as electron-accepting moiety, and employed as non-fullerene acceptors in polymer solar cells (PSCs). All the copolymers show wide absorption varying from 300 to 850 nm in the visible and NIR spectrum. When changing the PDI/NDI ratio in the polymer backbone, The LUMO energy levels vary in the range of −3.90 to −3.80 eV and the HOMO energy levels vary in the range of −6.10 to −5.85 eV. Among PSCs based on PTB7-Th donor and these polymer acceptors, the devices based on PTB7-Th/NDI100 yield the best power conversion efficiency (PCE) of 4.67%, while the PTB7-Th/PDI100-based devices yield a PCE of 1.03%. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 682–689     

Recent development of perylene diimide-based small molecular non-fullerene acceptors in organic solar cells

This review summarizes the recent progress of perylene diimide (PDI) derivatives used as the acceptor materials in non-fullerene organic solar cells. The resulting structure-property correlations and design strategies of this type of acceptors are discussed and commented, which will help to constructing high-performance PDI-based acceptor materials in the future. The problems at present and the effort direction are also pointed out in this review.     

有机太阳能电池中基于苝二酰亚胺结构小分子受体进展

最近几年,有机太阳能电池中的非富勒烯小分子受体研究引起了人们的兴趣。其中,苝二酰亚胺(PDI)类分子因具有良好的电子传输能力,较强的电子亲和力,稳定的光、热、化学性能以及化学结构的可设计性带来的性能可调控性而得到广泛的关注。本文总结了近三年来在体异质结有机太阳能电池应用方面PDI小分子受体的研究进展,重点关注了PDI分子结构对其性能的影响,希望为以后PDI类受体分子的设计思路起到一定的启发作用。     

Ethynyl-linked perylene bisimide based electron acceptors for non-fullerene organic solar cells

Star-shaped electron acceptors based on perylene bisimide as end groups and spiro-aromatic core linked with ethynyl units were developed for nonfullerene solar cells. Ethynyl linkers are able to improve the planarity of conjugated backbone, resulting in enhanced electron mobility and power conversion efficiency in solar cells.     

Dimeric naphthalene diimide based small molecule acceptors: synthesis,characterization, and photovoltaic properties

Herein, we present two naphthalene diimide (NDI) dimer based small molecule acceptors, Bis-NDI-T-EG and Bis-NDI-BDT-EG, in which two NDI units are bridged, respectively, by a thiophene (T) or a benzodithiophene (BDT), and further symmetrically substituted by 2-methoxylethoxyl (EG), both through the bay-region. These two NDI dimers exhibit broad absorption in the visible region of 300–650 (800) nm and display a HOMO/LUMO energy level of −5.88 eV/−3.80 eV and −5.46 eV/−3.78 eV, respectively. When PBDTTT-C-T was chosen as the polymer donor, Bis-NDI-T-EG and Bis-NDI-BDT-EG exhibited efficiencies of 1.31% and 1.24%, respectively.     

A chlorinated non-fullerene acceptor for efficient polymer solar cells

After additive and thermal annealing treatment, the PM6:Y15 based device obtains a high power conversion efficiency of 14.13%.     

All-polymer solar cells with perylenediimide polymer acceptors

Four polymers based on perylenediimide co-polymerized with thiophene, bithiophene, selenophone and thieno[3,2-b]thiophene were investigated as the acceptor materials in all-polymer solar cells. Two different donor polymers, poly[4,8-bis(5-(2-ethylhexyl)thiophen-2-yl)benzo[1,2-b;4,5-b′]dithiophene-2,6-diyl-alt-(4-(2-ethylhexyl)-3-fluorothieno[3,4-b]thiophene)-2-carboxylate-2,6-diyl](PTB7-Th) and poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3′′′-di(2-dodecyltetradecyl)-2,2′;5′,2″;5″,2′′′-quaterthiophen-5,5′′′-diyl)](Pff BT4T-2DT), with suitably complementary absorption spectra and energy levels were applied and examined. Among all different donor-acceptor pairs studied here, the combination of PTB7-Th:poly[N,N′-bis(1-hexylheptyl)-3,4,9,10-perylenediimide-1,6/1,7-diyl-alt-2,5-thiophene](PDI-Th) exhibited the best power conversion efficiency(PCE) of 5.13%, with open-circuit voltage(V_(oc)) = 0.79 V, short-circuit current density(J_(sc)) = 12.35 mA·cm~(-2) and fill-factor(FF) = 0.52. The polymer of PDI-Th acceptor used here had a regio-irregular backbone, conveniently prepared from a mixture of 1,6- and 1,7-dibromo-PDI. It is also noteworthy that neither additive nor posttreatment is required for obtaining such a cell performance.     

A chlorinated non-fullerene acceptor for efficient polymer solar cells

Improving the performance and reducing the manufacturing costs are the main directions for the development of organic solar cells in the future. Here, the strategy that uses chemical structure modification to optimize the photoelectric properties is reported. A new narrow bandgap (1.30 eV) chlorinated non-fullerene electron acceptor (Y15), based on benzo[d][1,2,3] triazole with two 3-undecyl-thieno[2′,3′:4,5] thieno[3,2-b] pyrrole fused -7-heterocyclic ring, with absorption edge extending to the near-infrared (NIR) region, namely A-DA'D-A type structure, is designed and synthesized. Its electrochemical and optoelectronic properties are systematically investigated. Benefitting from its NIR light harvesting, the fabricated photovoltaic devices based on Y15 deliver a high power conversion efficiency (PCE) of 14.13%, when blending with a wide bandgap polymer donor PM6. Our results show that the A-DA'D-A type molecular design and application of near-infrared electron acceptors have the potential to further improve the PCE of polymer solar cells (PSCs).     

Synthesis and characterization of arylenevinylenearylene–naphthalene diimide copolymers as acceptor in all–polymer solar cells

Two n‐type conjugated D‐A copolymers, P(TVT‐NDI) and P(FVF‐NDI) with thienylene‐vinylene‐thienylene (TVT) or furanylene‐vinylene‐furanylene (FVF) as donor (D) units and naphthalene diimide (NDI) as the acceptor (A) units, were synthesized by the Stille coupling copolymerization. The two polymers possess good solubility, high thermal stability, and broad absorption bands with absorption edges at 866 nm for P(TVT‐NDI) and 886 nm for P(FVF‐NDI) . The LUMO energy levels of P(TVT‐NDI) and P(FVF‐NDI) are ?3.80 eV and ?3.76 eV respectively, so the two polymers are suitable for the application as acceptor in blending with most polymer donor in PSCs based on the energy level matching point of view. All polymer solar cells (all‐PSCs) were fabricated with P(TVT‐NDI) or P(FVF‐NDI) as acceptor and medium bandgap polymer J51 as donor for investigating the photovoltaic performance of the two n‐type conjugated polymer acceptors. And higher power conversion efficiency of 6.43% for P(TVT‐NDI) and 5.21% for P(FVF‐NDI) was obtained. The results indicate that arylenevinylenearylene–naphthalene diimide copolymer are promising polymer acceptor for all–PSCs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55 , 1757–1764     

A new polymer acceptor containing naphthalene diimide and 1,3,4‐thiadiazole for all‐polymer solar cells

A n‐type conjugated polymer containing naphthalene diimide (NDI) and 1,3,4‐thiadiazole (TZ) moieties, named PNTZ, has been synthesized and applied for all‐polymer solar cells (all‐PSCs). By the incorporation of TZ unit into the polymer main chains, the lowest unoccupied molecular orbital level of this polymer has been adjusted effectively. In addition, the electron‐acceptor PNTZ shows a broad absorption spectrum in the range of 300–700 nm, and possesses complementary absorption spectrum with the electron‐donor PTB7‐Th. On the basis of PNTZ as the acceptor and PTB7‐Th as the donor, the all‐PSCs are fabricated. After optimization, the well blend morphologies with a continuous D/A interpenetrating network are observed and the best all‐PSC device exhibits a power conversion efficiency of 4.35% with a high short‐circuit current density of 13.26 mA cm^?2. This research demonstrates that the TZ‐containing polymer PNTZ is a promising non‐fullerene acceptor for high efficiency all‐PSCs. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55 , 990–996     

Ternary organic solar cells based on polymer donor,polymer acceptor and PCBM components

In this work,ternary organic solar cells(OSCs)combining a fullerene derivative PC71BM with a nonfullerene acceptor N2200-F blended with a polymer donor PM6 were reported.Compared with the binary systems,the highest power conversion efficiency(PCE)of 8.11%was achieved in ternary solar cells with 30 wt%N2200-F content,mainly due to the improved short-circuit current density(Jsc)and fill factor(FF).Further studies showed that the improved Jsc could attribute to the complementary abso rption of the two acceptors and the enhanced FF was originated from the higher hole mobility and the fine-tuned morphology in the ternary system.These results demonstrate that the combination of fullere ne and nonfullerene acceptors in ternary organic solar cells is a promising approach to achieve high-performance OSCs.     

非富勒烯型聚合物太阳电池取得超过11%的光伏效率

非富勒烯型聚合物太阳电池,由于其非富勒烯类受体材料可易于通过分子设计获得与聚合物给体材料互补的光吸收、匹配的电子能级从而有可能获得更高的效率,而受到了越来越多的关注.最近的研究发现,采用非富勒烯型受体材料与一种新型中等带隙聚合物给体材料可实现创纪录的11.2%的能量转换效率.这一成果预示非富勒烯受体将成为聚合物太阳电池研究下一波的新热点,并有可能成为这一类太阳电池新的突破口.     

Additive-free non-fullerene organic solar cells with random copolymers as donors over 9% power conversion efficiency

The PBDB-TBT1:ITIC-based device obtains PCE of 9.09%, and is insensitive to additive and thermal annealing, and forms microstructural morphology.     

Side chain engineering of naphthalene diimide–bithiophene‐based polymer acceptors in all‐polymer solar cells

Two novel polymeric acceptors based on naphthalene diimide (NDI) and 2.2′‐bithiophene, named as P(NDI2THD‐T2) and P(NDI2TOD‐T2), were designed and synthesized for all polymer solar cells application. The structural and electronic properties of the two acceptors were modulated through side‐chain engineering of the NDI units. The optoelectronic properties of the polymers and the morphologies of the blend films composed of the polymer acceptors and a donor polymer PTB7‐Th were systemically investigated. With thiophene groups introduced into the side chains of the NDI units, both polymers showed wider absorption from 350 nm to 900 nm, compared with the reference polymer acceptor of N2200. No redshift of absorption spectra from solutions to films indicated reduced aggregation of the polymers due to the steric hindrance effect of thiophene rings in the side chains. The photovoltaic performance were characterized for devices in a configuration of ITO/PEDOT:PSS/PTB7‐Th:acceptors/2,9‐bis(3‐(dimethylamino)propyl)anthra[2,1,9‐def:6,5,10‐def]diisoquinoline‐1,3,8,10(2H,9H)‐tetraone (PDIN)/Al. With the addition of diphenyl ether as an additive, the power conversion efficiencies (PCEs) of 2.73% and 4.75% for P(NDI2THD‐T2) and P(NDI2TOD‐T2) based devices were achieved, respectively. The latter showed improved J_sc, Fill Factor (FF), and PCE compared with N2200 based devices. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 3679–3689     

Recent developments of di-amide/imide-containing small molecular non-fullerene acceptors for organic solar cells

Non-fullerene organic solar cells have received increasing attentions in these years, and great progresses have been made since 2013. Among them, aromatic di-amide/imide-containing frameworks have shown promising applications. The outstanding properties of them are highly associated with their unique electronic and structural features, such as strong electron-withdrawing nature, broad absorption in UV-visible region, tunable HOMO/LUMO energy levels, easy modifications, and excellent chemical, thermal and photochemical stabilities. In this review, we give an overview of recent developments of aromatic diamide/imide-containing small molecules used as electron acceptors for organic solar cells.     

The recent progress of wide bandgap donor polymers towards non-fullerene organic solar cells

The recent progress of wide bandgap (WBG) donor polymers for non-fullerene polymer solar cells (NF-PSCs) were reviewed in detail, which was classified by D-type and D-A type molecular backbones to discuss the related structure-property correlations and put forward an outlook for future innovations.     

Graphene-based materials for polymer solar cells

Due to the remarkable electronic, optical, thermal, and mechanical properties, graphene-based materials have shown great potential in a wide range of technique applications. Particularly, the high transparency, conductivity, flexibility, and abundance make graphene materials highly attractive for polymer solar cells (PSCs). Graphene-based materials have been regarded as one promising candidate used in various parts in PSCs not only as electrodes, but also as interfacial layers and active layers with an aim to boost the power conversion efficiency of the devices. In this review, we summarize the recent progress about the design and synthesis of graphene-based materials for efficient PSCs along with the related challenges and future perspectives.     

骨架非稠合的电子受体在聚合物太阳能电池中的应用

Non-fullerene electron acceptors have attracted enormous attention of the research community owing to their advantages of optoelectronic and chemical tunabilities for promoting high-performance polymer solar cells (PSCs). Among them, fused-ring electron acceptors (FREAs) are the most popular ones with the good structural planarity and rigidity, which successfully boost the power conversion efficiencies (PCEs) of PSCs to over 14%. In considering the cost-control of future scale-up applications, it is also worthwhile to explore novel structures that are easy to synthesize and still maintain the advantages of FREAs. In this work, we design and synthesize a new electron acceptor with an unfused backbone, 5, 5'-((2, 5-bis((2-hexyldecyl)oxy)-1, 4-phenylene)bis(thiophene-2-yl))bis(methanylylidene)) bis(3-oxo-2, 3-dihydro-1H-indene-2, 1-diylidene))dimal-ononitrile (ICTP), which contains two thiophenes and one alkoxy benzene as the core and 2-(3-oxo-2, 3-dihydroinden-1-ylidene) malononitrile (IC) as the terminal groups. The synthetic route to ICTP involves only three steps, with high yields. Density functional theory calculations indicate that the non-covalent interactions, O…H and O…S, help reinforce the space conformation between the central core and the terminals. ICTP shows broad and strong absorption in the long-wavelength range between 500 and 760 nm. The highest occupied molecular orbital and lowest unoccupied molecular orbital levels of ICTP were measured to be -5.56 and -3.84 eV by cyclic voltammetry. The suitable absorption and energy levels make ICTP a good acceptor candidate for medium bandgap polymer donors. The best devices based on PBDB-T:ICTP showed a PCE of 4.43%, with an open circuit voltage (V_OC) of 0.97 V, a short circuit current density (J_SC) of 8.29 mA∙cm^-2, and a fill factor (FF) of 0.55, after adding 1% 1, 8-diiodooctane (DIO) as the solvent additive. Atomic force microscopy revealed that DIO could ameliorate the strong aggregation in the blended film and lead to a smoother film surface. The hole and electron mobilities of the optimized device were measured to be 9.64 and 2.03 × 10^-5 cm²∙V^-1∙s^-1, respectively, by the space-charge-limited current method. The relatively low mobilities might be responsible for the moderate PCE. Further studies can be performed to enlarge the conjugation length by including more aromatic rings. This study provides a simple strategy to design non-fullerene acceptors and a valuable reference for the future development of PSCs.