共查询到19条相似文献,搜索用时 218 毫秒
1.
近年来,有机-无机复合保温材料作为新型保温材料在建筑市场中迅速发展。本文重点概述了水泥基有机-无机复合保温材料和石膏基有机-无机复合保温材料的应用现状。并指出了该类材料目前面临的问题,提出未来发展方向。 相似文献
2.
3.
以经过改性废旧EPS(聚苯乙烯)颗粒为保温骨料,以石膏-矿渣胶凝材料为无机粘结材料,制备出具有一定的强度、造价低廉、利废节能且具有良好保温性能的EPS-石膏-矿渣墙体保温材料,并研究了聚苯乙烯颗粒含量与该复合材料各项性能的关系.结果表明,对EPS颗粒进行改性处理,其作用效果明显,能显著改善EPS-石膏-矿渣墙体保温材料的各项性能,提高材料的强度和软化系数;随着EPS颗粒含量的增加,材料的强度迅速降低,密度下降,导热系数随之减小,而软化系数略有提高. 相似文献
4.
为了进一步提高磷石膏的综合利用率,本文采用单因素试验,研究了α-烯基磺酸钠(AOS)、动物蛋白、十二烷基硫酸钠(K12)质量比为1∶1∶1的复合发泡剂稀释化对磷石膏基发泡建筑石膏孔隙率及孔隙结构的影响,并研究了孔隙率与强度、导热系数之间存在的关系。研究结果表明,当表观密度在600~800 kg/m3时,磷石膏基发泡建筑石膏的热工性能要优于其他四组泡沫保温材料,当表观密度大于900 kg/m3时,抗压强度要远远高于其他石膏基泡沫材料,导热系数与孔隙率之间的关系符合Maxwell-Euchen1模型,而抗压强度与孔隙率之间的关系更符合Hasselmann方程。本研究可为磷石膏基发泡建筑石膏生产提供数据支撑。 相似文献
5.
6.
《广东化工》2021,(16)
随着人们节能环保意识的提升,建筑节能问题逐渐引起了人们的关注。墙体保温技术是建筑节能中应用较为广泛的技术之一,墙体保温经历了外墙内保温、夹芯层保温、外墙外保温等发展历程。其中外墙外保温因其节能效果好等特点而被大力推广应用。鉴于目前推广应用的有机、无机外墙外保温材料各自存在保温性能差、阻燃性能不佳和结构强度低等问题,对于阻燃性好、安全性高的有机/无机复合墙体保温材料的研究逐渐引起了研究者们的兴趣。本文综述了用于墙体保温的有机/无机复合保温材料的研究进展。重点介绍有机泡沫基复合保温材料和胶凝材料基复合保温材料。有机泡沫,包括聚氨酯、酚醛树脂、聚苯乙烯泡沫;无机胶凝材料,包括水泥、石膏。有机泡沫基复合材料旨在提高材料的阻燃性能、结构强度及韧性等;胶凝材料基复合材料则考察材料的保温性能、防水性能及材料成本等。最后,对有机/无机复合保温材料的发展趋势作出了展望。 相似文献
7.
8.
9.
10.
在近日举行的2013中国国际新材料展览会上,聚氨酯保温材料企业及设备企业占了半壁江山。展会负责人介绍,"今年聚氨酯保温材料的消耗量明显增长,在国家大力推动绿色节能建筑建设的背景下,聚氨酯保温材料的发展前景十分广阔。"据了解,建筑用硬泡聚氨酯保温材料传热系数为0.017-0.024,与其他保温材料相比,传热系数优势显著前景广泛 相似文献
11.
玻璃纤维增强石膏砌块的研究与应用 总被引:1,自引:0,他引:1
介绍石膏砌块作为一种新型轻质的内墙体材料所体现出的尺寸精确、装配简便、施工快捷、施工后墙体可直接刮漆、隔音效果好等优点,分析了玻璃纤维在石膏砌块收缩过程中,在墙体抗拉过程中的阻裂作用,并介绍了玻璃纤维在石膏砌块生产中的应用。 相似文献
12.
Lightweight cold-formed steel (CFS) construction solutions are increasingly adopted in low and mid-rise buildings. Many different materials are used to construct CFS wall systems, without a full understanding of their thermal properties. For many of these materials, only ambient temperature thermal properties are available from their manufacturers. This creates difficulty in classifying the materials for use at elevated temperatures. In this study, a series of elevated temperature thermal property tests to measure specific heat, thermal conductivity, and mass loss was conducted for a range building materials from wallboards, insulation, and phase-change materials (PCMs), used in Australia and several other countries. Simultaneous Thermal Analyser and Laser Flash Apparatus were used to determine the elevated temperature thermal properties of the selected materials, gypsum plasterboard, PCM incorporated gypsum plasterboard, magnesium sulphate board, fibre cement board, cellulose insulation, vacuum insulation panel, microencapsulated paraffin PCM, and bio-based PCM. Their elevated temperature thermal properties are presented in this article, which also includes analyses of their chemical composition and associated chemical reactions at elevated temperatures. These results can be used in the selection of suitable energy-efficient and fire-resistive materials, and in heat transfer modeling to identify wall configurations with increased fire resistance and energy efficiency. 相似文献
13.
The author has developed a series of computer models to predict the fire resistance of wood‐framed walls and floors. The models utilize two‐dimensional heat‐conduction equations and thermo‐physical property data to describe heat transfer through the assemblies. The model for wall assemblies WALL2D, the basic version of the wall model, has already been published in Fire and Materials. Recently, WALL2D has been extended to WALL2DN to analyse heat transfer through insulated walls and walls that experience openings at the joints between adjacent sheets of gypsum board. Since gypsum board shrinks at high temperatures, the joints between adjacent sheets of gypsum board open. Hot fire gases, thereby, enter the openings and heat the edge of the gypsum board and wood studs. The new model WALL2DN simulates the joint opening and describes the resultant effect of openings. The model also calculates heat transfer through insulation in the stud cavity and depicts the effect of insulation on the fire resistance of non‐load bearing wall assemblies. Insulation selected in WALL2DN is glass‐fibre insulation, rock‐fibre insulation, polystyrene foam and polyurethane foam. When walls are exposed to fire, the insulation in the cavity shrinks (and/or melts) and an empty space appears at the interface between insulation and gypsum board. The model simulates this shrinking behaviour of insulation in the cavity. Finally, the model was validated by comparing the predicted results to those from full‐scale standard fire‐endurance tests. Copyright © 2003 John Wiley & Sons, Ltd. 相似文献
14.
15.
基于聚苯乙烯泡沫塑料保温材料的应用和研究,综述了保温材料的研究现状,从影响保温材料保温性能的三大因素——耐火性能、导热率、吸水率进行具体分析;然后基于聚苯乙烯泡沫塑料保温材料的研究现状,概述了聚苯乙烯泡沫塑料的优势,并分析了其耐火性能和保温性能,发现聚苯乙烯泡沫塑料在保温方面效果显著;聚苯乙烯泡沫塑料保温材料可以应用于外墙外保温构造、内墙内保温构造、屋面工程保温构造。 相似文献
16.
航天飞机及高超飞行器热防护材料是关系航天飞机及高超飞行器安全的关键之一。刚性高效隔热材料具有耐高温和稳定性好等优点,成为航天飞机和高超声速飞行器高温区和大面积区域所用的重要的热防护结构材料。本文回顾了刚性高效隔热材料在高超声速飞行器热防护系统中的应用,综述美国刚性隔热材料技术研究进展与应用现状,介绍了刚性隔热材料在美国航天飞机及飞行器中的应用,特别是新型的防热-隔热一体化陶瓷瓦的应用。此外,概括了国内刚性隔热材料的研究情况,最后展望了应用于高超声速飞行器中的隔热材料未来发展。 相似文献
17.
以相变储能脱硫石膏保温砂浆为内墙保温层兼找平层,以调温调湿抗菌柔性腻子为找平层,以调温调湿抗菌内墙涂料为装饰面层,形成的内墙保温-装饰一体化系统,具有保温隔热、调温控温、吸湿放湿、抗菌防霉、隔音降噪、祛除异味、利于保健等多种功能。 相似文献
18.
针对传统有机外墙保温材料易燃的缺陷,结合无机保温材料在导热和容重方面的优势,提出制备一种新型的阻燃外墙外保温材料。为验证该材料的最佳试验配比,采用正交试验方法,以轻质骨料、化学外加剂和粉煤灰、玻化微珠等作为原材料,以JG/T 158-2013作为标准,通过导热系数、抗压强度、干密度测试等方法对制备的保温材料性能进行测试。通过测试结果表明:当标准材料中轻质骨料10.5%、粉煤灰22%、硅灰16%、纤维0.25%的时候,制备的保温材料导热系数、抗压强度、容重分别为0.053 W/(m·K)、0.052 MPa、216 kg/m3,符合试验标准。通过干湿循环试验,对材料微观结构进行观察,发现试验前后材料为出现裂痕,由此说明在干湿交替下仍可保持较高强度。由此,通过上述的试验表明,制备的外墙外保温材料可行。 相似文献
19.
辊道窑是陶瓷工业的新型窑炉,其具有很多优点。有利于实现烧成工序的机械化与自动化,是快速烧成较理想的窑炉,但由于辊子长度的限制。窑墙结构较薄;但无论窑炉多先进,耗热大还是陶瓷窑炉的重要课题。笔者曾对窑墙散热计算时发现。在不改变耐火材料及保温材料的厚度及种类。只改变耐火材料及保温材料的砌筑方法,得到不同保温性能,从而可进一步探讨改进辊道窑窑墙结构的方案。 相似文献