Studies on the polyblends of poly(vinyl chloride) with various methacrylate copolymers,melt rheological properties. II

Studies have been made on the melt rheological properties of poly(vinyl chloride) (PVC) with copolymers of methyl methacrylate (MMA) and methyl acrylate (MA), ethyl acrylate (EA), butyl acrylate (BA), and 2-ethyl hexyl acrylate (EHA) at a blending ratio of 80:20. Effect of blend composition on shear stress–shear rate, melt viscosity, melt elasticity, and extrudate distortion have been studied. A significant decrease in the melt viscosity is observed on incorporation of low T_g, acrylate copolymers such as those with BA and EHA, thereby reducing the processing temperature. First normal stress and die swell ratio also decreases with an increase in the side chains of acrylate copolymer. PVC blended with P(MMA-co-BA) and P(MMA-co-EHA) is sensitive to both temperature and shear stress.     

Copolymerization of pentachlorophenyl acrylate with vinyl acetate and ethyl acrylate. Polymer-bound fungicides

Copolymers of pentachlorophenyl acrylate (M₁) with both vinyl acetate and ethyl acrylate were prepared (in benzene at 60°C initiated by t-butyl peroxypivalate) at a variety of M₁/M₂ ratios. The reactivity ratios for the vinyl acetate (M₂) copolymerizations were r₁ = 1.44 and r₂ = 0.039, while for ethyl acrylate copolymerizations r₁ = 0.21 and r₂ = 0.88. The glass transition temperatures were obtained as a function of the M₁/M₂ ratio. The values of T_g for the copolymers fell between those of poly(pentachlorophenyl acrylate) and either poly(vinyl acetate) or poly(ethyl acrylate). A series of bulk copolymers with low pentachlorophenyl acrylate content were studied as biocidal coatings using accelerated growth agar dish tests inoculated with Aspergillus sp., Pseudomonas sp., Alternaria sp., and Aureobasidium pullulans. The copolymers retarded or prevented growth but did not give a zone of inhibition around the coatings. Pentachlorophenol, when added to coating polymers, did exhibit a zone of inhibition due to migration of this biocide into the agar medium.     

Carbon black‐filled poly(ethylene‐co‐alkyl acrylate) composites: Calorimetric studies

The calorimetric characteristics of carbon black (CB)/poly(ethylene‐co‐alkyl acrylate) composites depend on both the CB and acrylate contents. An increase of the acrylate content in the pure copolymers tends to decrease all the crystalline characteristics: T_c,n, the nonisothermal crystallization temperature; T_m, the melting temperature, and ΔH_m, the melting enthalpy. CB modifies the crystallization kinetics of poly(ethylene‐co‐ethyl acrylate) (EEA) alone and in blends with poly(ethylene‐co‐24% w/w methyl acrylate) (24EMA) and poly(ethylene‐co‐35% w/w methyl acrylate) (35EMA). In the presence of CB, T_c,n, the nonisothermal crystallization temperature of EEA, increases and t_1/2, the half‐crystallization time, decreases for a given isothermal crystallization temperature, T_c,i. The thermograms obtained during the melting of EEA after isothermal crystallization show multiple endotherms, suggesting that crystalline‐phase segregation has occurred. The existence of different crystalline species can be explained by the presence of fractions of different acrylate content in the copolymers as shown by SEC. Therefore, CB does not seem to have much effect on the subsequent melting temperature of EEA, T_m,s. CB also induces a lower melting enthalpy, Δ H_m, in the blends. This decrease of ΔH_m appears to be constant whatever the compound, but when reported to the melting enthalpy of the polymer without CB, δΔH_m/ΔH_m increases with the acrylate content. A slight increase of the amorphous phase stiffness after CB introduction is noticed: The T_g of EEA/24EMA and EEA/35EMA blends increases by several degrees. Therefore, plotting ΔH_m versus ΔC_p shows that for the same ΔH_m the ΔC_p is lower in CB‐filled samples, suggesting there is some kind of rigid amorphous phase not contributing to the glass transition. We propose to explain the CB activity during the crystallization process by the existence of molecular interactions between CB and acrylate groups rather than by a pure nucleating effect. Thus, the increase of T_c,n and the decrease of ΔH_m could be explained by the fact that CB separates acrylate‐rich chains from the crystallization medium, accelerating the crystallization of the acrylate‐poor chains. During such a crystallization process, CB may be preferentially localized in the more polar amorphous phase and scattered between the two crystalline phases of EEA and EXA. These blends of poly(ethylene‐co‐alkyl acrylate) copolymers with CB provide interesting materials with adjustable properties depending on the acrylate and CB contents and on the thermomechanical treatments. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 79: 779–793, 2001     

Functionalization of lignin: Synthesis of lignophenol‐graft‐poly(2‐ethyl‐2‐oxazoline) and its application to polymer blends with commodity polymers

Lignophenol (LP)‐graft‐poly(2‐ethyl‐2‐oxazoline) (POZO) was prepared to reuse lignin, an industrial waste material, and to produce novel LP‐based polymer blends with poly(vinyl chloride) (PVC), poly(bisphenol A carbonate) (PC), polyvinylpyrrolidone (PVP), and polystyrene (PSt) as commodity polymers. The resulting graft polymer was soluble in various types of organic solvents such as chloroform, THF, acetone, and methanol, unlike LP. The miscibility of LP‐graft‐POZO with commodity polymers was measured by differential scanning calorimetry (DSC) to determine the glass transition temperatures (T_g). In the cases of the blends of LP‐graft‐POZO with PVC, PC, and PVP, the T_g values decreased during the second scan. Moreover, in the cases of the blends with PVC and PVP, the T_g values were not detected during the third scan. Therefore, it was inferred that LP‐graft‐POZO was miscible with PVC, PC, and PVP while forming single phases; in particular, the blends of LP‐graft‐POZO with PVC and PVP exhibited a secondary miscibility because the T_g values were not detected. Furthermore, the blend of LP‐graft‐POZO with PC exhibited better thermostability than LP and LP‐graft‐POZO. These results indicated that LP blended with POZO could be used as a polymer additive and as an adhesive to combine different polymers, organic–inorganic polymers, etc. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2012     

Compatibilizing effects of poly(styrene-graft-ethylene oxide) in blends of polystyrene and butyl acrylate polymers

The compatibilizing effect of poly(styrene-graft-ethylene oxide) in polystyrene (PS) blends with poly(n-butyl acrylate) (PBA) and poly(n-butyl acrylate-co-acrylic acid) (PBAAA) was investigated. No significant effects of the graft copolymer on the domain size were found in the PBA blends. By functionalizing PBA with acrylic acid, the average size of the polyacrylate domains was reduced considerably by the graft copolymer. Thermal and dynamic mechanical analysis of the PS/PBAAA blends revealed that the PBAAA glass transition temperature (T_g) decreased with increasing graft copolymer content. The effect of the graft copolymer in the PS/PBAAA blends can be explained by interactions across the interface due to the formation of hydrogen bonds between the poly(ethylene oxide) (PEO) side chains in the graft copolymer and the acrylic acid segments in the PBAAA phase. Hydrogen bonding was confirmed by IR analysis of binary blends of PEO and PBAAA. Partial miscibility in the PEO/PBAAA blends was indicated by a PEO melting point depression and by a T_g reduction of the PBAAA phase. The thermal properties of the PEO/PBA blends indicated only very limited miscibility. © 1996 John Wiley & Sons, Inc.     

Processability and characterization of poly(vinyl chloride)‐b‐poly(n‐butyl acrylate)‐b‐poly(vinyl chloride) prepared by living radical polymerization of vinyl chloride. Comparison with a flexible commercial resin formulation prepared with PVC and dioctyl phthalate

This work reports the synthesis and processing of a new flexible material based on PVC produced by living radical polymerization. The synthesis was carried out in a two‐step process. In the first step the macroinitiator α, ω‐di(iodo)poly(butyl acrylate) [α, ω‐di(iodo)PBA] was synthesized in water by single electron transfer/degenerative chain transfer mediated living radical polymerization (SET‐DTLRP) catalyzed by Na₂S₂O₄. In the second step this macroinitiator was reinitiated by SET‐DTLRP of vinyl chloride (VC), thereby leading to the formation of the block copolymer poly(vinyl chloride)‐b‐poly(butyl acrylate)‐b‐poly(vinyl chloride) [PVC‐b‐PBA‐b‐PVC]. This new material was processed on a laboratory scale. The DMTA traces showed only a single glass transition temperature, thus indicating that no phase segregation was present. The copolymers were studied with regard to their processing, miscibility, and mechanical properties. The first comparison with commercial formulations made with PVC and dioctyl phthalate (DOP) is presented. J. VINYL ADDIT. TECHNOL., 12:156–165, 2006. © 2006 Society of Plastics Engineers     

Effect of chain rigidity on block copolymer micelle formation and dissolution as observed by 1H-NMR spectroscopy

Amphiphilic copolymers poly(methyl methacrylate-b-acrylic acid), poly(methyl methacrylate-b-methacrylic acid), poly(methyl acrylate-b-acrylic acid) and poly(methyl acrylate-b-methacrylic acid) were prepared by reversible addition fragmentation chain-transfer (RAFT) polymerization. The hydrophilic polyacid blocks were either synthesized directly or formed by the hydrolysis of poly(tert-butyl acrylate) or poly(tert-butyl methacrylate) blocks. The hydrophobic blocks consisted of either the more rigid, high glass transition temperature (T _g ) poly(methyl methacrylate) or more flexible, low T _g poly(methyl acrylate) material. The hydrophilic blocks were either poly(methacrylic acid) (rigid, high T _g ) or poly(acrylic acid) (flexible, low T _g ). The micellization behavior of the polymers was studied by proton nuclear magnetic resonance (¹H-NMR) spectroscopy in mixtures of 1,4-dioxane-d₈ and D₂O. All four polymers were soluble in neat dioxane. In solutions of higher water content, the polymers with the more rigid hydrophobic blocks formed into micelles as was evidenced by broadening of the resonances resulting from the protons in those blocks. At moderate water concentration (25–50%), dissolution of the micelles was observed upon heating the solution. No micellization was observed in polymers containing the less rigid poly(methyl acrylate) hydrophobic block regardless of the identity of the hydrophilic block. As further evidence of micellization formation and dissolution, the spin-lattice (T ₁) and spin-spin (T ₂) relaxation times of protons in the hydrophobic and hydrophilic blocks were measured. Significant differences in the relaxation times as functions of temperature and solvent concentration were observed between the hydrophilic and hydrophobic blocks of the micelle-forming polymers.     

Dynamic mechanical properties of poly(vinyl chloride) and polyurethane carboxylate blends

The miscibility of thermoplastic polyurethane elastomers (TPUs) with poly(vinyl chloride) (PVC) was studied. PVC blends with TPUs, prepared from 4,4-diphenylmethane diisocyanate as diisocyanate, hydroxy-terminated poly(butylene adipate) (PBA) as the soft segment, and dimethylolpropionic acid as the chain extender carrying a latent anionic site for neutralization by triethylamine, showed a single glass transition temperature (T_g), irrespective of neutralization of latent anionic sites of TPU. But in neutralized TPU/PVC blends, limited intimate segmental mixing was perceived from the mechanical properties observed. When hydroxy-terminated poly(propylene glycol) was used as the soft segment instead of hydroxy-terminated PBA, PVC/TPU blends showed two separate T_g's of PVC and TPU, irrespective of neutralization. © 1994 John Wiley & Sons, Inc.     

Synthesis and properties of poly(vinyl chloride-g-2-methyl-2-oxazoline)

Summary Poly(vinyl chloride-g-2-methyl-2-oxazoline) copolymers were prepared by grafting from the allyl chloride sites of PVC with KI or AgOSO₃CF₃ as coinitiators. Use of AgOSO₃CF₃ led to higher grafting efficiencies and higher contents of poly(2-methyl-2-oxazoline) in the graft copolymers. DTA analyses of the P(VC-g-Me-Oxz) identified the thermal transitions of this copolymer; TGA analyses showed that the graft copolymers were less thermally stable than the constituent homopolymers. Unlike blends of P(Me-Oxz) and PVC, the graft copolymers could be molded easily; the graft materials exhibited greater flexural moduli but lower HDT's than PVC.     

Comparison of thermomechanical properties of statistical, gradient and block copolymers of isobornyl acrylate and n-butyl acrylate with various acrylate homopolymers

Well-defined statistical, gradient and block copolymers consisting of isobornyl acrylate (IBA) and n-butyl acrylate (nBA) were synthesized via atom transfer radical polymerization (ATRP). To investigate structure-property correlation, copolymers were prepared with systematically varied molecular weights and compositions. Thermomechanical properties of synthesized materials were analyzed via differential scanning calorimetry (DSC), dynamic mechanical analyses (DMA) and small-angle X-ray scattering (SAXS). Glass transition temperature (T_g) of the resulting statistical poly(isobornyl acrylate-co-n-butyl acrylate) (P(IBA-co-nBA)) copolymers was tuned by changing the monomer feed. This way, it was possible to generate materials which can mimic thermal behavior of several homopolymers, such as poly(t-butyl acrylate) (PtBA), poly(methyl acrylate) (PMA), poly(ethyl acrylate) (PEA) and poly(n-propyl acrylate) (PPA). Although statistical copolymers had the same thermal properties as their homopolymer equivalents, DMA measurements revealed that they are much softer materials. While statistical copolymers showed a single T_g, block copolymers showed two T_gs and DSC thermogram for the gradient copolymer indicated a single, but very broad, glass transition. The mechanical properties of block and gradient copolymers were compared to the statistical copolymers with the same IBA/nBA composition.     

Dielectric properties of copolymers based on cyano monomers and methyl α‐acetoxyacrylate

With the aim of developing dielectric polymers containing CN groups with strong dipole moment, alternating and statistical copolymers of the cyano monomers vinylidene cyanide (VCN), acrylonitrile and methacrylonitrile with methyl α‐acetoxyacrylate (MAA) were synthesized and characterized. The copolymer's composition and microstructure were analysed by NMR spectroscopy, SEC and elemental analysis. The reactivity ratios calculated from the Q–e Alfrey–Price parameters for these copolymers indicated the alternating and statistical structures confirmed by NMR analysis. The copolymers have glass transition temperatures T_g in the range 83–146 °C and are stable up to 230 °C. The thermal stability of the copolymers depends on the nature of the cyano monomers. Their molecular dynamics were investigated by dielectric relaxation spectroscopy. We revealed a weak relaxation β at sub‐T_g temperature for poly(VCN‐co‐MAA) usually originating from molecular motions that are restricted to the scale of a few bond lengths. Strong α‐relaxation processes occurred above T_g for these copolymers. This primary relaxation was associated with cooperative movements of the polar groups (CN) at the time of mobility of the principal chains. The activation energy of the α‐relaxation process was also calculated. The values of the dielectric increment Δε for these copolymers were determined by Cole–Cole plots and indicated that the copolymers exhibit interesting dielectric properties compared with similar cyano materials. The polarity–permittivity relationship was also established. © 2012 Society of Chemical Industry     

Physical properties of poly(vinyl chloride)–grafted N‐isopropylacrylamide graft copolymers and corresponding polyblends

The physical properties of poly(vinyl chloride) (PVC) and poly(N‐isopropylacrylamide) [poly(NIPAAm)] blend systems, and their corresponding graft copolymers such as PVC‐g‐NIPAAm, were investigated in this work. The compatible range for PVC–poly(NIPAAm) blend systems is less than 15 wt % poly(NIPAAm). The water absorbencies for the grafted films increase with increase in graft percentage. The water absorbencies for the blend systems increase with increase in poly(NIPAAm) content within the compatible range for the blends, but the absorbencies decrease when the amount of poly(NIPAAm) is more than the compatible range in the blend system. The tensile strengths for the graft copolymers are larger than the corresponding blends. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 76: 170–178, 2000     

Graft copolymers of polysaccharides with thermoplastic polymers. A new type of filled plastic

A series of starch graft copolymers and one cellulose graft copolymer were prepared containing 40-50 percent synthetic polymer. The monomers used (styrene, methyl methacrylate, methyl acrylate, and butyl acrylate) were chosen to give grafted synthetic polymers with varying glass transition temperatures (T_g). These graft copolymers were extruded, in the absence of any added thermoplastic homopolymer, to give strong, continuous polysaccharide-filled plastics which are biodegradable and which exhibit little or no die swell. Properties of plastics varied with the T_g of the thermoplastic portion. Starch-g-polystyrene and starch-g-poly(methyl methacrylate) were hard and brittle, while graft copolymers prepared from methyl and butyl acrylate were more flexible and leathery. The graft Uopolymers with lower T_g grafts required less torque and could be extruded at lower temperatures. In the methyl acrylate series, a graft copolymer prepared from gelatinized starch was more easily extruded than one prepared from granular starch, and addition of water produced a water-filled extrudate of excellent quality. The surprising feature of these results is that the matrix polymers, starch and cellulose, are rigid, nonsoftening materials. Grafting of a thermoplastic polymer to these matrix polymers would not be expected to give an extrudable product. The results are explained as powder flow followed by fusion or sintering of the graft polymers under the temperature and pressure conditions in the die.     

Studies of crosslinked styrene–alkyl acrylate copolymers for oil absorbency application. I. Synthesis and characterization

The prepolymers for a novel oil absorbent were synthesized by copolymerizing styrene with 2‐ethylhexyl acrylate (EHA), lauryl acrylate (LA), lauryl methacrylate (LMA), and stearyl acrylate (SA). Suspension polymerization was carried out using benzoyl peroxide (BPO) as an initiator with a varying monomer feed ratio, and the copolymers were characterized by FTIR, ¹H‐NMR, DSC, and a solubility test. The copolymers were random copolymers with a single phase, and their compositions were similar to those in the monomer feed. The T_g of the copolymer could be controlled by varying the styrene/acrylate ratio. Acrylates introduced the crosslinking to linear polymers as a side reaction. Crosslinked copolymers were synthesized by adding divinylbenzene (DVB) as a crosslinking agent. At a low degree of crosslinking (0.5 wt % DVB), the T_g of the crosslinked copolymers was lower than or similar to that of the uncrosslinked ones. At a high degree of crosslinking, the T_g increased with increasing crosslinking density. © 2000 John Wiley & Sons, Inc. J Appl Polym Sci 77: 903–913, 2000     

Viscoelastic properties of branched polyacrylate melts

The viscoelastic properties of poly(n‐butyl acrylate), poly(ethyl acrylate) and poly(methyl acrylate) melts have been studied using samples that varied in both molar mass and the mol% branched repeat units, these properties having been previously determined by gel permeation chromatography and ¹³C NMR spectroscopy, respectively. Poly(n‐butyl acrylate) was studied most extensively using seven samples; one sample of poly(n‐butyl acrylate), two samples of poly(ethyl acrylate) and one sample of poly(methyl acrylate) were used to study the effect of side‐group size. Storage and loss moduli were measured over a range of frequency (1 × 10^?3 to 1 × 10² rad s^?1) at temperatures from T_g + 20 °C to T_g + 155 °C and then shifted to form master curves at T_g + 74 °C through use of standard superposition procedures. The plateau regions were not distinct due to the broad molar mass distributions of the polyacrylates. Hence, the upper and lower limits of shear storage modulus from the nominal ‘plateau’ region of the curves for the seven poly(n‐butyl acrylate) samples were used to calculate the chain molar mass between entanglements, M_e, which gave the range 13.0 kg mol^?1 < M_e < 65.0 kg mol^?1. The Graessley–Edwards dimensionless interaction density and dimensionless contour length concentration were calculated for poly(n‐butyl acrylate) using the mean value of plateau modulus (1.2 × 10⁵ Pa) and three different methods for estimation of the Kuhn length; the data fitted closely to the Graessley–Edwards universal plot. The Williams–Landel–Ferry C₁ and C₂ parameters were determined for each of the polyacrylates; the data for the poly(n‐butyl acrylate) samples indicate an overall reduction in C₁ and C₂ as the degree of branching increases. Although the values of C₁ and C₂ were different for poly(n‐butyl acrylate), poly(ethyl acrylate) and poly(methyl acrylate), there is no trend for variation with structure. Thus the viscoelastic properties of the polyacrylate melts are similar to those for other polymer melts and, for the samples investigated, the effect of molar mass appears to dominate the effect of branching. © 2001 Society of Chemical Industry     

Aminolysis reaction of poly(N-4-methylphenylitaconimide) and its graft copolymerization

Polyitaconimide and copolymers of itaconimide were transformed to macromolecules having diamido pendent groups via an aminolysis reaction. The polymers obtained were cast into films, which were then graft copolymerized with acrylamide (AAM) using ceric ion as an initiator. Radical homopolymerization and copolymerization of N-4-methylphenylitaconimide with methyl acrylate or ethyl acrylate were carried out at 60°C in benzene; high molecular weight polymer and copolymers (M?_n = 10⁴–10⁵) were obtained. The resulting polymer and copolymers were reacted with n-butylamine in order to produce polymers possessing a pendent 4-tolylcarbamoyl group (4-CH₃C₆H₄NHCO-), which can significantly promote the acrylamide (AAM) graft copolymerization initiated with ceric ion. Transparent films of the polymers were graft copolymerized with AAM in the presence of ceric ion at 45°C. The formation of graft polymers was verified by water absorption percentage, XPS and SEM.     

Morphologies and dynamic mechanical properties of core‐shell emulsifier‐free latexes and their copolymers for P(BA/MMA)/P(MMA/BA) and P(BA/MMA)/PSt systems in the presence of AHPS

Different poly(methyl methacrylate/n‐butyl acrylate)/poly(n‐butyl acrylate/methyl methacrylate) [P(BA/MMA)/P(MMA/BA)] and poly(n‐butyl acrylate/methyl methacrylate)/polystyrene [P(BA/MMA)/PSt] core‐shell structured latexes were prepared by emulsifier‐free emulsion polymerization in the presence of hydrophilic monomer 3‐allyloxy‐2‐hydroxyl‐propanesulfonic salt (AHPS). The particle morphologies of the final latexes and dynamic mechanical properties of the copolymers from final latexes were investigated in detail. With the addition of AHPS, a latex of stable and high‐solid content (60 wt %) was prepared. The diameters of the latex particles are ～0.26 μm for the P(BA/MMA)/P(MMA/BA) system and 0.22–0.24 μm for the P(BA/MMA)/PSt system. All copolymers from the final latexes are two‐phase structure polymers, shown as two glass transition temperatures (T_gs) on dynamic mechanical analysis spectra. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 86: 3078–3084, 2002     

The effect of crystallites on the rheological properties of microphase‐separated PVC‐PBA‐PVC triblock copolymers obtained by single electron transfer‐degenerative chain transfer living radical polymerization

Linear and nonlinear rheological properties of poly(vinyl chloride) (PVC)‐poly(n‐butyl acrylate)‐PVC triblocks of different compositions, obtained by single electron transfer‐degenerative chain transfer living radical polymerization, are investigated, focusing on the effect of crystallites. Dynamic mechanical thermal analysis results show the existence of two glass transition temperatures, denoting microphase segregation. However, rather than phase separation, it is the presence of two types of crystals that melt at T_m1 = 127 ± 0.8°C and T_m2 = 185 ± 2°C, respectively, the factor that determines the rheological response of the copolymers. To the difference with PVC homopolymers, extrusion flow measurements at very low temperatures (T = 100°C) are possible with the copolymers. A change in the viscosity‐temperature dependence is observed below and above the lowest melting temperature. Notwithstanding the microphase separation and the presence of crystallites, experiments carried out in conditions similar to industrial processing reveal a remarkable viscosity reduction for our copolymers with respect to PVC obtained by single electron transfer‐degenerative chain transfer living radical polymerization, conventional PVC, and PVC/[diethyl‐(2‐ethylhexyl) phthalate] compounds. Extrudates free of surface instabilities are obtained at low extrusion temperatures, such as 90–100°C. J. VINYL ADDIT. TECHNOL., 21:24–32, 2015. © 2014 Society of Plastics Engineers     

Preparation and characterization of polyaniline N‐grafted with poly(ethyl acrylate) synthesized via atom transfer radical polymerization

Polyaniline (PANI) N‐grafted with poly(ethyl acrylate) (PEA) was synthesized by the grafting of bromo‐terminated poly (ethyl acrylate) (PEA‐Br) onto the leucoemeraldine form of PANI. PEA‐Br was synthesized by the atom transfer radical polymerization of ethyl acrylate in the presence of methyl‐2‐bromopropionate and copper(I) chloride/bipyridine as the initiator and catalyst systems, respectively. The leucoemeraldine form of PANI was deprotonated by butyl lithium and then reacted with PEA‐Br to prepare PEA‐g‐PANI graft copolymers containing different amounts of PEA via an N‐grafting reaction. The graft copolymers were characterized by Fourier transform infrared spectroscopy, elemental analysis, and thermogravimetric analysis. Solubility testing showed that the solubility of PANI in chloroform was increased by the grafting of PEA onto PANI. The morphology of the PEA‐g‐PANI graft copolymer films was observed by scanning electron microscopy to be homogeneous. The electrical conductivity of the graft copolymers was measured by the four‐probe method. The results show that the conductivity of the PANI decreased significantly with increasing grafting density of PEA onto the PANI backbone up to 7 wt % and then remained almost constant with further increases in the grafting percentage of PEA. © 2012 Wiley Periodicals, Inc. J. Appl. Polym. Sci., 2013     

Novel Poly(linolenic acid) Graft Copolymers: Synthesis,Characterization and Electrical Properties

A poly(linolenic acid)‐g‐poly(tert‐butyl acrylate) graft copolymer was synthesized from polymeric linolenic acid peroxide possessing peroxide groups in the main chain by free radical polymerization of tert‐butyl acrylate. Graft copolymers having structures of poly(linolenic acid)‐g‐poly(caprolactone)‐g‐poly(tert‐butyl acrylate) were synthesized from polymeric linolenic acid, possessing peroxide groups on the main chain by the combination of free radical polymerization of tert‐butyl acrylate and ring‐opening polymerization of ε‐caprolactone in one‐pot. The obtained graft copolymers were characterized by proton nuclear magnetic resonance, gel permeation chromatography, thermal gravimetric analysis, differential scanning calorimetry, and scanning electron microscopy techniques. Furthermore, Au/n‐Si diodes were fabricated with and without poly(linolenic acid)‐g‐poly(caprolactone)‐g‐poly(tert‐butyl acrylate)‐4 to form a new interfacial polymeric layer for the purpose of investigating this polymer's conformity in electronic applications. Some main electrical characteristics of these diodes were investigated using experimental current–voltage measurements in the dark and at room temperature.