用基于M-SST模型的DES数值模拟喷流流场

脱体涡数值模拟方法(dettached eddy simulation,DES)是把雷诺平均Navier-Stokes方程(RANS)方法及大涡模拟方法(LES)结合起来模拟有脱体涡的湍流流场的数值模拟方法,其主要思想是在物面附近解雷诺平均Navier-Stokes方程、在其他区域采用Smagorinski大涡模拟方法。本文在剪切应力传输(SST)湍流模型的基础上用DES及混合非结构网格数值模拟具有横向喷流的湍流流场,算法采用Osher逆风格式,利用该套程序(包括网格生成及算法),对导弹在不同马赫数下的喷流流场进行了数值模拟,并与同时开展的实验研究的结果进行了对比,结果表明用该方法处理这类问题是较准确的。     

A multiscale approach to hybrid RANS/LES wall modeling within a high-order discontinuous Galerkin scheme using function enrichment

We present a novel approach to hybrid Reynolds-averaged Navier-Stokes (RANS)/ large eddy simulation (LES) wall modeling based on function enrichment, which overcomes the common problem of the RANS-LES transition and enables coarse meshes near the boundary. While the concept of function enrichment as an efficient discretization technique for turbulent boundary layers has been proposed in an earlier article by Krank & Wall (A new approach to wall modeling in LES of incompressible flow via function enrichment. J Comput Phys. 2016;316:94-116), the contribution of this work is a rigorous derivation of a new multiscale turbulence modeling approach and a corresponding discontinuous Galerkin discretization scheme. In the near-wall area, the Navier-Stokes equations are explicitly solved for an LES and a RANS component in one single equation. This is done by providing the Galerkin method with an independent set of shape functions for each of these two methods; the standard high-order polynomial basis resolves turbulent eddies, where the mesh is sufficiently fine and the enrichment automatically computes the ensemble-averaged flow if the LES mesh is too coarse. As a result of the derivation, the RANS model is applied solely to the RANS degrees of freedom, which effectively prevents the typical issue of a log-layer mismatch in attached boundary layers. As the full Navier-Stokes equations are solved in the boundary layer, spatial refinement gradually yields wall-resolved LES with exact boundary conditions. Numerical tests show the outstanding characteristics of the wall model regarding grid independence, superiority compared to equilibrium wall models in separated flows, and achieve a speed-up by two orders of magnitude compared to wall-resolved LES.     

Investigation of a Dynamic Hybrid RANS/LES Modelling Methodology for Finite-Volume CFD Simulations

This paper investigates a recently proposed dynamic hybrid RANS-LES framework using a general-purpose finite-volume flow solver. The new method is highly generalized, allowing coupling of any selected RANS model with any selected LES model and containing no explicit grid dependence in its formulation. Selected results are presented for three test cases: two-dimensional channel flow, backward facing step, and a nozzle flow relevant to biomedical applications. Comparison with experimental and DNS data, and with other hybrid RANS-LES approaches, highlights the advantages of the new method and suggests that further investigation is warranted.     

An advanced switching parameter for a hybrid LES/RANS model considering the characteristics of near-wall turbulent length scales

In this study, we proposed an idea for an advanced switching parameter used in a hybrid approach connecting large eddy simulation (LES) with Reynolds-averaged Navier–Stokes modeling [the hybrid LES/RANS (HLR) model]. Although the HLR model is promising way to predict engineering turbulent flows, an important problem is that RANS is always adopted in the near-wall region, even if the grid resolution is fine enough for LES. To overcome this difficulty, the switching parameter proposed here introduced knowledge of the Kolmogorov microscale that is thought to be reasonable for representing the near-wall turbulence. This parameter enabled the present HLR model to be smoothly replaced by a full LES if a grid resolution was fine enough in the near-wall region. To confirm model performance, the present HLR model was applied to numerical simulations of a periodic hill flow as well as fundamental plane channel flows. The model generally provided reasonable predictions for these test cases that include complex turbulence with massive flow separation.     

Implementation and Evaluation of an Embedded LES-RANS Solver

In the current work, we present the development and application of an embedded large-eddy simulation (LES) - Reynolds-averaged Navier Stokes (RANS) solver. The novelty of the present work lies in fully embedding the LES region inside a global RANS region through an explicit coupling at the arbitrary mesh interfaces, exchanging flow and turbulence quantities. In particular, a digital filter method (DFM) extracting mean flow, turbulent kinetic energy and Reynolds stress profiles from the RANS region is used to provide meaningful turbulent fluctuations to the LES region. The framework is developed in the open-source computational fluid dynamics software OpenFOAM. The embedding approach is developed and validated by simulating a spatially developing turbulent channel flow. Thereafter, flow over a surface mounted spanwise-periodic vertical fence is simulated to demonstrate the importance of the DFM and the effect of the location of the RANS-LES interface. Mean and second-order statistics are compared with direct numerical simulation (DNS) data from the literature. Results indicate that feeding synthetic turbulence at the LES interface is essential to achieve good agreement for the mean flow quantities. However, in order to obtain a good match for the Reynolds stresses, the LES interface needs to be placed sufficiently far upstream, which in the present case was six spoiler heights before the fence. Further, a realistic spoiler configuration with finite-width in the spanwise direction and inclined at 30 degrees was simulated using the embedding approach. As opposed to the vertical fence case this is a genuinely (statistically) three-dimensional case and a very good match with mean and second-order statistics was obtained with the experimental data. Finally, in order to test the present solver for high sub-sonic speed flows the flow over an open cavity was simulated. A good match with reference data is obtained for mean and turbulence profile comparisons. Tones in the pressure spectra were predicted reasonably well and an overall sound pressure level with a maximum deviation of 2.6 d B was obtained with the present solver when compared with the experimental data.     

Hybrid URANS/LES Turbulence Simulation of Vortex Shedding Behind a Triangular Flameholder

In this study a detached eddy simulation (DES) model, which belongs to the group of hybrid URANS/LES turbulence models, is used for the simulation of vortex shedding behind a triangular obstacle. In the near wall region or in regions where the grid resolution is not sufficiently fine to resolve smaller structures, the two-equation RANS shear-stress transport (SST) model is used. In the other regions with higher grid resolution a LES model, which uses a transport equation for the turbulent subgrid energy, is applied. The DES model is first investigated for two standard test cases, namely decaying homogeneous isotropic turbulence and the backward facing step, respectively. For the decaying homogeneous isotropic turbulence test case the evolution of the energy spectra in wavenumber space for different times are studied for both the DES and a Smagorinsky type LES model. Different grid resolutions are analyzed with a special emphasis on the modeling constant connecting the filter length scale to the grid size. The results are compared to experimental data. The backward facing step test case is used to study the model behavior for a case with a transition region between a RANS modeling approach close to the wall and LES based modeling in the intense shear flow region. The final application is the simulation of the vortex shedding behind a triangular obstacle. First, the influence of the inlet condition formulation is studied in detail as they can have a significant influence especially for LES based models. Detailed comparisons between simulation and experiment for the flow structure past the obstacle and statistical quantities such as the shedding frequency are shown. Finally the additional temporal and spatial information provided by the DES model is used to show the predicted anisotropy of turbulence.     

Experiences with two detached eddy simulation approaches through use of a high-order finite volume solver

In the present study, two advanced detached eddy simulation (DES) approaches, shear-layer-adapted delayed DES and zonal DES in mode II, which are known to help transition from RANS to LES mode, are employed in various flow problems in conjunction with a high-order finite volume solver. The numerical scheme, being only applicable on structured grids, has low-dissipation and low-dispersion features. Such features benefit mostly in the LES mode, minimizing the interference of numerical diffusion with subgrid eddy viscosity. First, corresponding subgrid models are validated via decaying homogeneous turbulence benchmark case. Then, a channel flow problem is chosen to examine these models in attached flow situations. Finally, flow around an airfoil at low Reynolds number is solved using the shear-layer-adapted delayed DES approach only, in an aim to obtain trailing-edge noise spectrum at an observer location. Despite some log-layer mismatch over turbulent boundary layers, which is typical of most DES methods, the combined application of high-resolution numerical method and advanced DES approaches, which are implemented on a stabilized Spalart-Allmaras turbulence model, shows merit in resolution of turbulence in regions of interest.     

An Attempt to Combine Large Eddy Simulation with the k-ε Model in a Channel-Flow Calculation

Large eddy simulation (LES) is combined with the Reynolds-averaged Navier–Stokes (RANS) equation in a turbulent channel-flow calculation. A one-equation subgrid-scale model is solved in a three-dimensional grid in the near-wall region whereas the standard k–ε model is solved in a one-dimensional grid in the outer region away from the wall. The two grid systems are overlapped to connect the two models smoothly. A turbulent channel flow is calculated at Reynolds numbers higher than typical LES and several statistical quantities are examined. The mean velocity profile is in good agreement with the logarithmic law. The profile of the turbulent kinetic energy in the near-wall region is smoothly connected with that of the turbulent energy for the k–ε model in the outer region. Turbulence statistics show that the solution in the near-wall region is as accurate as a usual LES. The present approach is different from wall modeling in LES that uses a RANS model near the wall. The former is not as efficient as the latter for calculating high-Reynolds-number flows. Nevertheless, the present method of combining the two models is expected to pave the way for constructing a unified turbulence model that is useful for many purposes including wall modeling. Received 11 June 1999 and accepted 15 December 2000     

Prediction of separation flows around a 6：1 prolate spheroid using RANS/LES hybrid approaches

This paper presents hybrid Reynolds-averaged Navier–Stokes (RANS) and large-eddy-simulation (LES) methods for the separated flows at high angles of attack around a 6:1 prolate spheroid. The RANS/LES hybrid methods studied in this work include the detached eddy simulation (DES) based on Spalart–Allmaras (S–A), Menter’s k–ω shear-stress-transport (SST) and k–ω with weakly nonlinear eddy viscosity formulation (Wilcox–Durbin+, WD+) models and the zonal-RANS/LES methods based on the SST and WD+ models. The switch from RANS near the wall to LES in the core flow region is smooth through the implementation of a flow-dependent blending function for the zonal hybrid method. All the hybrid methods are designed to have a RANS mode for the attached flows and have a LES behavior for the separated flows. The main objective of this paper is to apply the hybrid methods for the high Reynolds number separated flows around prolate spheroid at high-incidences. A fourth-order central scheme with fourth-order artificial viscosity is applied for spatial differencing. The fully implicit lower–upper symmetric-Gauss–Seidel with pseudo time sub-iteration is taken as the temporal differentiation. Comparisons with available measurements are carried out for pressure distribution, skin friction, and profiles of velocity, etc. Reasonable agreement with the experiments, accounting for the effect on grids and fundamental turbulence models, is obtained for the separation flows. The project supported by the National Natural Science Foundation of China (10502030 and 90505005).     

基于卡门尺度和滤波方法的SST方程改进

基于滤波方法和卡门尺度对原始剪切应力输运(shear stress transport, SST)湍流模型进行了改进,提出了一种卡门尺度修正的滤波SST 方法. 湍流多尺度效应必须在分离流场模拟中给予反映,该方法减弱了雷诺平均(Reynolds averaged Navier-Stokes, RANS)方法时间平均特性对于流场脉动量的压迫作用,在流场中引入了大涡模拟(large eddy simulation, LES)方法的亚格子模型,形成一种新型的脱体涡模拟方法(detached eddy simulation,DES)方法;同时,为了降低原始DES方法在网格加密过程中产生网格诱发的雷诺应力损耗,利用卡门尺度对滤波因子进行修正. 平板边界层算例中,卡门尺度对于RANS方法的跟随性远远强于DES方法,在边界层内的速度型和RANS方法吻合很好,而DES方法在加密过程中速度型的鲁棒性较差,说明卡门尺度在有效地保护了边界层内使用RANS求解,降低速度型偏离对数率现象的产生;HGR-01翼型算例证明BY-SST方法可以有效的避免网格诱导分离现象的产生;证明BY-SST方法在分离流动中的精度高于DES方法.     

Improvement of double-buffer problem in LES–RANS interface region by introducing an anisotropy-resolving subgrid-scale model

The “double-buffer problem” has been regarded as a crucial concern for the strategy behind the hybrid large eddy simulation (LES)/Reynolds-averaged Navier–Stokes (RANS) model (or HLR model, for short). Such models are likely to show unphysical mean-velocity distributions in the LES–RANS interface region, where “super-streak structures” also appear that look like low-speed streaks generated in the near-wall region of wall turbulence. To overcome this difficulty, the stochastic backscatter model, in which the vortex structures in the interface region are divided into smaller scales, holds promise due to the effect of random source term imposed in the momentum equation. Although this method is effective, several parameters must be prescribed and their specification process is arbitrary and ambiguous. An alternative advanced HLR model has been proposed, in which an anisotropy-resolving subgrid-scale (SGS) model was adopted in the LES region as well as a one-equation nonlinear eddy viscosity model in the RANS region. Previous investigations indicated that this HLR model did not exhibit or, at least, largely reduced the “double-buffer problem” in the mean-velocity distribution, with no special treatment being applied. The main purpose of the present study is to reveal why this HLR model improves the predictive performance in the LES–RANS interface region. Specifically, we focus on the role of the extra anisotropic term introduced in the SGS model, finding that it plays an important role in enhancing vortex structures in the interface region, leading to a considerable improvement in model performance.     

Large Eddy and Reynolds-Averaged Navier - Stokes Simulations of Turbulent Flow Over an Airfoil

A Large Eddy Simulation (LES) of turbulent flow over an airfoil near stall is performed. Results of the LES are compared with those of Reynolds-Averaged Navier-Stokes (RANS) simulations using two well-known turbulence models, namely the Baldwin-Lomax model and the Spalart-Allmaras model. The subgrid scale model used for the LES is the filtered structure function model. All simulations are performed using the same structured multi-block code. In order to reduce the CPU time, an implicit time stepping method is used for the LES. The purpose of this study is to show the possibilities and limitations of LES of complex flows associated with aeronautical applications using state of the art simulation techniques. Typical flow features are captured by the LES such as the adverse-pressure gradient and flow retardation. Visualization of instantaneous flow fields shows the typical streaky structures in the near-wall region.     

High‐order detached eddy simulation,zonal LES and URANS of cavity and labyrinth seal flows

Hybrid numerical large eddy simulation (NLES), detached eddy simulation (DES) and URANS methods are assessed on a cavity and a labyrinth seal geometry. A high sixth‐order discretization scheme is used and is validated using the test case of a two‐dimensional vortex. The hybrid approach adopts a new blending function. For the URANS simulations, the flow within the cavity remains steady, and the results show significant variation between models. Surprisingly, low levels of resolved turbulence are observed in the cavity for the DES simulation, and the cavity shear layer remains two dimensional. The hybrid RANS–NLES approach does not suffer from this trait. For the labyrinth seal, both the URANS and DES approaches give low levels of resolved turbulence. The zonal Hamilton–Jacobi approach on the other had given significantly more resolved content. Both DES and hybrid RANS–NLES give good agreement with the experimentally measured velocity profiles. Again, there is significant variation between the URANS models, and swirl velocities are overpredicted. Copyright © 2013 John Wiley & Sons, Ltd.     

Application of an Explicit Algebraic Reynolds Stress Model within a Hybrid LES–RANS Method

Large-eddy simulations (LES) still suffer from extremely large resources required for the resolution of the near-wall region, especially for high-Re flows. That is the main motivation for setting up hybrid LES–RANS methods. Meanwhile a variety of different hybrid concepts were proposed mostly relying on linear eddy-viscosity models. In the present study a hybrid approach based on an explicit algebraic Reynolds stress model (EARSM) is suggested. The model is applied in the RANS mode with the aim of accounting for the Reynolds stress anisotropy emerging especially in the near-wall region. For the implementation into a CFD code this anisotropy-resolving closure can be formally expressed in terms of a non-linear eddy-viscosity model (NLEVM). Its extra computational effort is small, still requiring solely the solution of one additional transport equation for the turbulent kinetic energy. In addition to this EARSM approach, a linear eddy-viscosity model (LEVM) is used in order to verify and emphasize the advantages of the non-linear model. In the present formulation the predefinition of RANS and LES regions is avoided and a gradual transition between both methods is assured. A dynamic interface criterion is suggested which relies on the modeled turbulent kinetic energy and the wall distance and thus automatically accounts for the characteristic properties of the flow. Furthermore, an enhanced version guaranteeing a sharp interface is proposed. The interface behavior is thoroughly investigated and it is shown how the method reacts on dynamic variations of the flow field. Both model variants, i.e. LEVM and EARSM, have been tested on the basis of the standard plane channel flow and even more detailed on the flow over a periodic arrangement of hills using fine and coarse grids.     

Hybrid LES–RANS technique based on a one-equation near-wall model

In order to reduce the high computational effort of wall-resolved large-eddy simulations (LES), the present paper suggests a hybrid LES–RANS approach which splits up the simulation into a near-wall RANS part and an outer LES part. Generally, RANS is adequate for attached boundary layers requiring reasonable CPU-time and memory, where LES can also be applied but demands extremely large resources. Contrarily, RANS often fails in flows with massive separation or large-scale vortical structures. Here, LES is without a doubt the best choice. The basic concept of hybrid methods is to combine the advantages of both approaches yielding a prediction method, which, on the one hand, assures reliable results for complex turbulent flows, including large-scale flow phenomena and massive separation, but, on the other hand, consumes much fewer resources than LES, especially for high Reynolds number flows encountered in technical applications. In the present study, a non-zonal hybrid technique is considered (according to the signification retained by the authors concerning the terms zonal and non-zonal), which leads to an approach where the suitable simulation technique is chosen more or less automatically. For this purpose the hybrid approach proposed relies on a unique modeling concept. In the LES mode a subgrid-scale model based on a one-equation model for the subgrid-scale turbulent kinetic energy is applied, where the length scale is defined by the filter width. For the viscosity-affected near-wall RANS mode the one-equation model proposed by Rodi et al. (J Fluids Eng 115:196–205, 1993) is used, which is based on the wall-normal velocity fluctuations as the velocity scale and algebraic relations for the length scales. Although the idea of combined LES–RANS methods is not new, a variety of open questions still has to be answered. This includes, in particular, the demand for appropriate coupling techniques between LES and RANS, adaptive control mechanisms, and proper subgrid-scale and RANS models. Here, in addition to the study on the behavior of the suggested hybrid LES–RANS approach, special emphasis is put on the investigation of suitable interface criteria and the adjustment of the RANS model. To investigate these issues, two different test cases are considered. Besides the standard plane channel flow test case, the flow over a periodic arrangement of hills is studied in detail. This test case includes a pressure-induced flow separation and subsequent reattachment. In comparison with a wall-resolved LES prediction encouraging results are achieved.      

Hybrid RANS/LES computations of plane impinging jets with DES and PANS models

The qualities of a DES (Detached Eddy Simulation) and a PANS (Partially-Averaged Navier–Stokes) hybrid RANS/LES model, both based on the k–ω RANS turbulence model of Wilcox (2008, “Formulation of the k–ω turbulence model revisited” AIAA J., 46: 2823–2838), are analysed for simulation of plane impinging jets at a high nozzle-plate distance (H/B = 10, Re = 13,500; H is nozzle-plate distance, B is slot width; Reynolds number based on slot width and maximum velocity at nozzle exit) and a low nozzle-plate distance (H/B = 4, Re = 20,000). The mean velocity field, fluctuating velocity components, Reynolds stresses and skin friction at the impingement plate are compared with experimental data and LES (Large Eddy Simulation) results. The k–ω DES model is a double substitution type, following Davidson and Peng (2003, “Hybrid LES–RANS modelling: a one-equation SGS model combined with a k–ω model for predicting recirculating flows” Int. J. Numer. Meth. Fluids, 43: 1003–1018). This means that the turbulent length scale is replaced by the grid size in the destruction term of the k-equation and in the eddy viscosity formula. The k–ω PANS model is derived following Girimaji (2006, “Partially-Averaged Navier–Stokes model for turbulence: a Reynolds-Averaged Navier–Stokes to Direct Numerical Simulation bridging method” J. Appl. Mech., 73: 413–421). The turbulent length scale in the PANS model is constructed from the total turbulent kinetic energy and the sub-filter dissipation rate. Both hybrid models change between RANS (Reynolds-Averaged Navier–Stokes) and LES based on the cube root of the cell volume. The hybrid techniques, in contrast to RANS, are able to reproduce the turbulent flow dynamics in the shear layers of the impacting jet. The change from RANS to LES is much slower however for the PANS model than for the DES model on fine enough grids. This delays the break-up process of the vortices generated in the shear layers with as a consequence that the DES model produces better results than the PANS model.     

LES and DES Investigations of Turbulent Flow over a Sphere at Re = 10,000

Large Eddy Simulation (LES) using a dynamic Smagorinsky type subgridstress (SGS) model and Detached Eddy Simulation (DES) are applied toprediction and investigation of the flow around a sphere at a Reynoldsnumber of 10⁴ in the subcritical regime. In this regime the boundarylayers at separation are laminar, and transition to turbulence occursfarther downstream in the separated shear layers via Kelvin–Helmholtz(K–H) instabilities. The dynamic eddy viscosity model of Germano et al.(Physics of Fluids 3 (1991) 1760–1765) is used in the LES, while the current implementation of the DESemploys a formulation based on the Spalart–Allmaras (S–A) model. DES isa hybrid approach in which the closure is a modification to theproduction/destruction term of the original Reynolds-AveragedNavier–Stokes (RANS) model, reducing to RANS in the attached regions,and to LES away from the wall. In the present work where we simulate theflow over a sphere in the subcritical regime in which the boundarylayers at separation are laminar, DES can be viewed as LES with adifferent SGS model. Effects of the discretization scheme used toapproximate the convective terms are considered, along with sensitivityof predictions to changes in the additional model coefficient, C _DES, in the DES formulation. DES and LES yield similar predictions of the wakestructure, large-scale vortex shedding and the Strouhal numberassociated with the low frequency mode in the wake. Predictions ofquantities such as the drag coefficient, wake frequencies, position oflaminar separation on the sphere, and the mean pressure andskin-friction distributions along the sphere are in good agreement withthe measurements of Achenbach (Journal of Fluid Mechanics 54 (1972) 565–575). Predictions of the primaryReynolds shear stress, turbulent kinetic energy, eddy viscosity, andturbulent dissipation for the two models are also similar. In addition,both models successfully resolve the formation of the vortex tubes inthe detached shear layers along with the value of the Strouhal numberassociated with the high frequency instability mode, provided that thelevel of numerical dissipation introduced by the discretization schemeremains sufficiently low. Flow physics investigations are focused onunderstanding the wake structure in the subcritical regime.     

Hybrid LES-RANS using synthesized turbulent fluctuations for forcing in the interface region

The main bottleneck in using Large Eddy Simulations at high Reynolds number is the requirement of very fine meshes near walls. One of the main reasons why hybrid LES-RANS was invented was to eliminate this limitation. In this method unsteady RANS (URANS) is used near walls and LES is used away from walls. The present paper evaluates a method for improving standard LES-RANS. The improvement consists of adding instantaneous turbulent fluctuations (forcing conditions) at the matching plane between the LES and URANS regions in order to trigger the equations to resolve turbulence. The turbulent fluctuations are taken from synthesized homogeneous turbulence assuming a modified von Kármán spectrum. Both isotropic and non-isotropic fluctuations are evaluated. The new approach is applied to fully developed channel flow and it is shown that the imposed fluctuations considerably improve the predictions. It is found that increasing the prescribed turbulent length scale of the synthesized turbulence provides excellent agreement with the classical log-law.     

Detached eddy simulation of cyclic large scale fluctuations in a simplified engine setup

Computational Fluid Dynamics using RANS-based modelling approaches have become an important tool in the internal combustion engine development and optimization process. However, these models cannot resolve cycle to cycle variations, which are an important aspect in the design of new combustion systems. In this study the feasibility of using a Detached Eddy Simulation (DES) SST model, which is a hybrid RANS/LES model, to predict cycle to cycle variations is investigated. In the near wall region or in regions where the grid resolution is not sufficiently fine to resolve smaller structures, the two-equation RANS SST model is used. In the other regions with higher grid resolution an LES model is applied. The case considered is a geometrically simplified engine, for which detailed experimental data for the ensemble averaged and single cycle velocity field are available from Boreé et al. [Boreé, J., Maurel, S., Bazile, R., 2002. Disruption of a compressed vortex, Physics of Fluids 14 (7), 2543–2556]. The fluid flow shows a strong tumbling motion, which is a major characteristic for modern turbo-charged, direct-injection gasoline engines. The general flow structure is analyzed first and the extent of the LES region and the amount of resolved fluctuations are discussed. Multiple consecutive cycles are computed and turbulent statistics of DES SST, URANS and the measured velocity field are compared for different piston positions. Cycle to cycle variations of the velocity field are analyzed for both computation and experiment with a special emphasis on the useability of the DES SST model to predict cyclic variations.     

Unsteady CFD simulations of a pump in part load conditions using scale-adaptive simulation

The scope of this work is to demonstrate the applicability of an eddy resolving turbulence model in a turbomachinery configuration. The model combines the Large Eddy Simulation (LES) and the Reynolds Averaged Navier Stokes (RANS) approach. The point of interest of the present investigation is the unsteady rotating stall phenomenon occurring at low part load conditions. Since RANS turbulence models often fail to predict separation correctly, a LES like model is expected to give superior results. In this investigation the scale-adaptive simulation (SAS) model is used. This model avoids the grid dependence appearing in the Detached Eddy Simulation (DES) modelling strategy. The simulations are validated with transient measurement data. The present results demonstrate, that both models are able to predict the major stall frequency at part load. Results are similar for URANS and SAS, with advantages in predicting minor stall frequencies for the turbulence resolving model.