智能包装系统用石墨烯基超级电容器的制备

目的 制备具有优异电化学性能的石墨烯/纳米纤维素/二氧化锰复合纤维水系超级电容器。方法 采用超声波分散处理制备氧化石墨烯/纳米纤维素/二氧化锰混合纺丝液;运用湿纺纺丝工艺制备氧化石墨烯/纳米纤维素/二氧化锰杂化纤维电极;通过氢碘酸还原和冷冻干燥处理构建具有多孔结构的石墨烯/纳 米纤维素/二氧化锰复合纤维电极;最后,将其组装成两电极水系超级电容器。结果 在石墨烯/纳米纤维素/二氧化锰复合纤维中,纳米纤维素的添加有效抑制了石墨烯片层的自聚集,并显著提升了复合纤维的亲水性和拉伸强度。二氧化锰的加入显著提升了纤维电极的电化学性能。得益于精心的实验设计,石墨烯/纳米纤维素/二氧化锰复合纤维的拉伸强度为338 MPa。组装后的水系超级电容器具有优异的电容性能和循环稳定性,在电流密度为0.1 mA/cm2时,面积电容为412.5 mF/cm2,循环1500次后,电容保持率为87%。结论 将切实可行的湿法纺丝策略与精心设计的电极结构相结合,制备的石墨烯/纳米纤维素/二氧化锰水系超级电容器为可穿戴便携式储能设备和智能包装能源供应系统的发展提供了良好的参考。     

纤维素纳米纤丝-还原氧化石墨烯/聚苯胺气凝胶柔性电极复合材料的制备与性能

利用高长径比的纤维素纳米纤丝（CNF）与片层结构的氧化石墨烯（GO）形成的CNF-GO复合水凝胶经抗坏血酸还原制备出CNF-还原氧化石墨烯（rGO）复合水凝胶材料。通过冷冻干燥法得到CNF-rGO复合气凝胶,并进一步通过苯胺单体在CNF-rGO复合气凝胶的孔道内原位聚合制备出CNF-rGO/聚苯胺（PANI）气凝胶柔性电极复合材料。研究了不同苯胺、CNF和GO的质量比对CNF-rGO/PANI气凝胶柔性电极复合材料的结构形貌和电化学性能的影响。结果表明,苯胺原位聚合后所得CNF-rGO/PANI复合气凝胶仍具有紧密的三维多孔网络结构。与rGO/PANI气凝胶电极复合材料相比,CNF-rGO/PANI气凝胶电极复合材料具有更理想的电容行为。当CNF与GO质量比为60∶40,PANI添加量为0.1 mol时,CNF-rGO/PANI气凝胶电极复合材料比电容可达85.9 Fg-1,且其电化学性能几乎不受弯曲程度的影响,展现出了良好的柔韧性和电化学性能。      

纳米纤维素/碳纤维-聚苯胺/碳纳米管电极的制备

目的以纳米纤维素/碳纤维复合膜为导电基底,制备纳米纤维素/碳纤维-聚苯胺/碳纳米管超级电容器电极。方法利用超声处理和真空抽滤制备纳米纤维素/碳纤维复合膜;利用原位聚合法制备聚苯胺和聚苯胺/碳纳米管复合材料;通过真空抽滤法制备纳米纤维素/碳纤维-聚苯胺电极和纳米纤维素/碳纤维-聚苯胺/碳纳米管电极。结果在纳米纤维素/碳纤维复合膜中,碳纤维形成了互穿导电网络结构,是良好的超级电容器电极导电基体;纳米纤维素/碳纤维-聚苯胺/碳纳米管电极具有良好的电化学性能,在扫描速率为5 mV/s的条件下,质量比电容为380.74 F/g,且在1000次循环测试后,电容保留率为88.05%。结论以纳米纤维素/碳纤维导电复合膜作为基体制备的纳米纤维素/碳纤维-聚苯胺/碳纳米管电极具有良好的电化学性能,可以作为超级电容器电极。     

以MoS2修饰的3D打印还原石墨烯气凝胶制备微型超级电容器电极(英文)

微型超级电容器(MSCs)具有高的功率密度和卓越的循环性能,广泛的潜在应用,因而受到诸多关注。然而,制备具有高表面电容和能量密度的MSCs电极仍然存在挑战。本研究使用还原石墨烯气凝胶(GA)和二硫化钼(MoS₂)作为材料,结合3D打印和表面修饰方法成功构建了具有超高表面电容和能量密度的MSCs电极。通过3D打印技术,获得具有稳定宏观结构和GA交联微孔结构的电极。此外,采用溶液法在3D打印电极表面加载MoS₂纳米片,进一步提高了材料的电化学性能。具体而言,电极的表面电容达3.99 F cm^-2,功率密度为194μW cm^-2,能量密度为1 997 mWh cm^-2,表现出卓越的电化学性能和循环稳定性。这项研究为制备具有高表面电容和高能量密度的微型超级电容器电极提供了一种简单高效的方法,在MSCs电极领域具有重要的参考意义。     

一种新型氧化还原活性凝胶电解质在超级电容器中的应用

以2-巯基吡啶(PySH)为氧化还原活性介质,以聚乙烯醇(PVA)为聚合物基体,采用溶液共混法制备了PVA-H2SO4-PySH凝胶电解质,研究了Py-SH添加量对凝胶电解质离子电导率的影响,并组装了活性炭电极超级电容器,利用循环伏安、恒流充放电、交流阻抗谱和自放电等测试对超级电容器电化学性能进行了表征。结果表明,PySH的引入提高了凝胶电解质的离子电导率,同时也改善了超级电容器的电化学性能,在相同电流密度下,超级电容器电极比电容由137F/g提高为394F/g,能量密度由3.6Wh/kg提高到12.4Wh/kg,经过3000次充放电循环后比电容保持率为89%。     

一种新型氧化还原活性凝胶电解质在超级电容器中的应用

以2-巯基吡啶(PySH)为氧化还原活性介质,以聚乙烯醇(PVA)为聚合物基体,采用溶液共混法制备了PVA-H2SO4-PySH凝胶电解质,研究了PySH添加量对凝胶电解质离子电导率的影响,并组装了活性炭电极超级电容器,利用循环伏安、恒流充放电、交流阻抗谱和自放电等测试对超级电容器电化学性能进行了表征。结果表明,PySH的引入提高了凝胶电解质的离子电导率,同时也改善了超级电容器的电化学性能,在相同电流密度下,超级电容器电极比电容由137F/g提高为394F/g,能量密度由3.6Wh/kg提高到12.4Wh/kg,经过3000次充放电循环后比电容保持率为89%。     

纳米纤维素/碳纳米管/纳米银线柔性电极的制备

目的以竹粉为原料制备纳米纤维素,并将其作为基底材料制备纳米纤维素/碳纳米管/纳米银线复合电极,应用于柔性超级电容器。方法采用化学机械处理法,将竹粉通过化学处理以及研磨、超声等处理,制备成纳米纤维素悬浮液;分别将多壁碳纳米管和纳米银线超声分散于溶剂中;最后,通过层层自组装制备纳米纤维素/碳纳米管/纳米银线复合电极,同时,作为对照组,制备纳米纤维素/碳纳米管复合电极。结果纳米纤维素纤丝的直径大约为30~100 nm,相互之间缠绕成网状结构,是很好的支撑材料,纳米纤维素/碳纳米管/纳米银线复合电极具有很好的成膜性和电化学性能,在扫描速率为30 m V/s时,面积比电容达到77.95 m F/cm~2。结论以纳米纤维素为基底,通过层层自组装方法制备的纳米纤维素/碳纳米管/纳米银线复合电极具有较好的电化学性能,可作为柔性超级电容器的电极。     

还原氧化石墨烯/Mn_3O_4纳米复合材料的合成及其在超级电容器中的应用

以改进的Hummers法所制氧化石墨烯/硫酸锰(GO/MnSO4)悬浊液为原料,原位合成GO/MnO2复合物,再经低温热处理制备还原氧化石墨烯/Mn3O4(rGO/Mn3O4)纳米复合材料。通过改变GO/MnSO4悬浊液中MnSO4的质量含量实现rGO/Mn3O4复合物中Mn3O4质量分数的可控调变。该法充分利用氧化石墨烯原液中的锰离子,可节省原料,同时可避免氧化石墨烯繁琐的分离过程并简化实验步骤。所得复合材料作为超级电容器电极材料展现良好的电化学电容性能,在饱和K2SO4电解质溶液和50 mA·g-1的电流密度下,Mn3O4质量含量为88%时其比电容达284 F·g-1。     

三维石墨烯的可压缩性能及在超级电容器中的应用

以氧化石墨烯为原料,通过水热反应和高温焙烧过程制备了三维石墨烯柱状体材料。采用机械力学测试方法分析三维石墨烯的可压缩性能,将其作为超级电容器的电极材料测试其电化学性能。结果表明,三维石墨烯呈多孔网状结构,具有良好的可压缩性能和机械性能。电极片厚度为2 mm,铝塑外包尺寸为5 cm×6 cm的对称超级电容器在电流密度为0.1 A/g下比电容为175 F/g,在电流密度为1 A/g下充放电循环10 000次后比电容保持率为81.9%。在加载不同大小压力压缩状态下,其保持了良好的电容性能。     

微波辅助制备石墨烯/裂解碳三维复合气凝胶及其在超级电容器中的应用研究

采用微波辅助的方法制备了氧化石墨烯/多巴胺复合三维凝胶结构,经过高温煅烧后得到具有丰富孔道结构的石墨烯/裂解碳三维复合凝胶结构。通过电镜发现经过微波辅助得到的三维凝胶结构中具有大量的三维连续孔道结构,为电解液在电极材料中的传递提供了丰富的路径,经过电容测试发现该结构具有优异的电化学超级电容器性能。     

High-performance asymmetric supercapacitors based on reduced graphene oxide/polyaniline composite electrodes with sandwich-like structure

The sandwich-like structure of reduced graphene oxide/polyaniline(RGO/PANI) hybrid electrode was prepared by electrochemical deposition. Both the voltage windows and electrolytes for electrochemical deposition of PANI and RGO were optimized. In the composites, PANI nanofibers were anchored on the surface of the RGO sheets, which avoids the re-stacking of neighboring sheets. The RGO/PANI composite electrode shows a high specific capacitance of 466 F/g at 2 m A/cm~2 than that of previously reported RGO/PANI composites. Asymmetric flexible supercapacitors applying RGO/PANI as positive electrode and carbon fiber cloth as negative electrode can be cycled reversibly in the high-voltage region of 0–1.6 V and displays intriguing performance with a maximum specific capacitance of 35.5 m F cm~(-2). Also, it delivers a high energy density of 45.5 m W h cm~(-2) at power density of 1250 m W cm~(-2). Furthermore, the asymmetric device exhibits an excellent long cycle life with 97.6% initial capacitance retention after 5000 cycles.Such composite electrode has a great potential for applications in flexible electronics, roll-up display,and wearable devices.     

Ni2CoS4/还原氧化石墨烯/多孔还原氧化石墨烯的制备及其在超级电容器中的应用

采用水热法制备Ni_2CoS_4活性材料,通过物理过程和水热反应将其与氧化石墨烯(GO)、水热多孔氧化石墨烯(HHGO)复合得到Ni_2CoS_4/还原氧化石墨烯/多孔还原氧化石墨烯(Ni_2CoS_4/RGO/HRGO)复合电极材料。采用X射线衍射仪(XRD)、扫描电子显微镜(SEM)、循环伏安测试、恒流充放电测试和交流阻抗测试等,对复合材料的形貌结构、电化学性能进行了表征。研究结果表明:在1 A/g的电流密度下,其比电容为1 684 F/g,在5 A/g的电流密度下循环2 000次后,其比电容保持率为91.8%。Ni_2CoS_4/RGO/HRGO优良的电化学行为归因于这种复合结构使电解液对电极材料的润湿程度提高,进而提高了离子和电荷的传输速率,同时也缓解石墨烯、Ni_2CoS_4的团聚和循环过程中的体积变化。因此,Ni_2CoS_4/RGO/HRGO是一种有良好应用前景的高性能超级电容器电极材料。     

石墨烯包覆分子筛复合电极材料的制备及其性能研究

以4A分子筛(4A)和改进Hummers法制备的氧化石墨烯凝胶(GO)为原料, 按一定质量比进行混合超声分散, 以混合分散液为前驱体煅烧制备了氧化还原石墨烯(RGO)包覆的三维复合4A/RGO电极材料。采用X射线衍射(XRD)、拉曼光谱(Raman)、孔径分析、扫描电子显微镜(SEM)和电化学测试等方法研究了复合材料的结构、形貌及超级电容性能。测试结果表明, 4A均匀地穿插在RGO片层中, 阻止了RGO片层之间相互堆积, 而RGO片层之间相互链接, 形成三维空间导电网络, 提高了复合电极材料的导电性。当GO与4A质量比为1:6时, 复合材料在4 A/g电流密度下比电容可达450 F/g, 在此电流密度下循环800次后, 其比容量保持率为85.7%, 表现出良好的倍率性能和循环稳定性。该4A/RGO复合电极材料超级电容性能优于纯4A或RGO, 可归因于4A和RGO之间的协同效应。     

A facile preparation of graphene/reduced graphene oxide/Ni(OH)2 two dimension nanocomposites for high performance supercapacitors

A Ni(OH)₂ composite with good electrochemical performances was prepared by a facile method. Ni(OH)₂ was homogeneously grown on the hydrophilic graphene/graphene oxide (G/GO) nanosheets, which can be prepared in large scale in my lab. Then G/GO/Ni(OH)₂ was reduced by L-Ascorbic acid to obtain G/RGO/Ni(OH)₂. Caused by the synergy effects among the components, the G/RGO/Ni(OH)₂ electrode showed good electrochemical properties. The G/RGO/Ni(OH)₂ electrode possessed a specific capacitance as high as 1510 F g⁻¹ at 2 A g⁻¹ and even 890 F g⁻¹ at 40 A g⁻¹. An asymmetric supercapacitor device consisting of G/RGO/Ni(OH)₂ and reduced graphene oxide (RGO) was installed and displayed a high energy density of 44.9 W h kg⁻¹ at the power energy density of 400.1 W kg⁻¹. It was verified that the G/GO nanosheets are ideal supporting material in supercapacitor.     

Characterization and mechanical properties of electrospun cellulose acetate/graphene oxide composite nanofibers

Graphene oxide incorporated cellulose acetate composite nanofibers were prepared via an electrospinning technique. The weight percentage of graphene oxide varied from 0.05 to 1.5 wt.% in the polymer solution. The morphologies and crystal structures of the resultant composite nanofibers were investigated by scanning electron microscopy and X-ray diffraction. The specific interaction was demonstrated by Fourier-transform infrared spectroscopy. Tensile test was performed to measure the mechanical properties of the prepared cellulose acetate/graphene oxide composite nanofibers. 1.5 wt.% cellulose acetate/graphene oxide composite nanofibers showed the highest tensile strength and Young's modulus.     

Hierarchical architecture of ultrashort carbon nanotubes/polyaniline nanocables coated on graphene sheets for advanced supercapacitors

Multilayer super-short carbon nanotubes (SSCNTs) could be prepared by tailoring raw multiwalled carbon nanotubes (MWCNTs) with mechanical-stirring and ultrasonic oxidation-cut method. The SSCNTs/polyaniline/reduced graphene oxide (SSCNTs/PANI/RGO) ternary hybrid composite was fabricated by reducing SSCNTs/PANI/GO precursor prepared by self-assembly from the complex dispersion of graphene oxide (GO) and the as-prepared SSCNTs/PANI nanocables, followed by redoping and reoxidation of the reduced PANI to restore the conducting structure of PANI in the ternary composite. The microscope images indicated that SSCNTs/PANI nanocables could uniformly distribute in the conductive network of graphene sheets and prevent the agglomeration of graphene. Such the hierarchical structure perfectly facilitates the contact between PANI for faradaic energy storage and electrolyte ions, and efficiently utilizes the double-layer capacitance of SSCNTs and graphene sheets at the electrode–electrolyte interfaces. The maximum specific capacitance of the SSCNTs/PANI/RGO composite achieved 845 F g^?1, which was much higher than that of pure PANI and SSCNTs/PANI nanocables. Moreover, the ternary composite also showed the good cycling stability, retaining about 96% of its initial capacitance after 1000 cycles because of the synergistic effect and conductive network of SSCNTs/PANI nanocables and graphene sheets. Therefore, the combined effects between SSCNTs/PANI nanocables and graphene sheets taking advantage of both charging and faradaic processes could readily explain the excellent electrochemical performance for supercapacitors.