Forms and solubility of plant nutrient elements in tropical plant waste biochars

Thailand is an agriculture‐based country which produces large amounts of agricultural waste. Making biochar from this waste can reduce pollution, decrease costs of production, and increase C sequestration. The agronomic benefits of biochar are partly derived from the available plant nutrients in biochar. This study investigated the fertilizer value of biochars manufactured by slow pyrolysis. Pyrolysis temperature and feedstock type affect nutrient concentrations and nutrient element speciation in biochar. The physio‐chemical, mineralogical and structural properties of biochars made from 14 agriculture wastes (soybean cake, corncob, lemon peel, sugar palm fibre, durian shell, tamarind wood, coconut fibre, coconut shell, bamboo wood, rice husk, eucalyptus wood, oil palm fruit, coffee waste, and bagasse) were investigated. The plant nutrients in biochar mostly occurred in crystalline minerals which were present on the surface and inside the cell structure of biochar. Most biochars examined in this research contained calcite (CaCO₃). The presence in biochars of several K‐minerals [archerite (KH₂PO₄), chlorocalcite (KCaCl₃), kalicinite (KHCO₃), pyrocoproite (K₂MgP₂O₇), struvite‐K (KMgPO₄ · 6 H₂O), and sylvite (KCl)] encourages the use of biochar as a K‐fertilizer. Fibre, fruit and wood biochars contained considerable amounts of K, Ca, and P. Sugar palm and coconut fibres also contained high level of Na in halite. This study recommends the utilization of biochars manufactured from sugar palm fibre, coconut fibre, durian shell, and oil palm fruit as fertilizers. With their appreciable contents of plant nutrients in highly to moderately soluble compounds these biochars should be effective fertilizers, especially for use by organic farmers who cannot use any chemical fertilizers.     

Impacts of biochar and processed poultry manure,applied to a calcareous soil,on the growth of bean and maize

Direct use of poultry manure on agricultural lands may cause environmental concerns, so there is a need to establish the suitability of the application of biochar derived from poultry manure for calcareous soil chemical properties and plant growth. The purpose of this study was to evaluate the effects of processed poultry manure (0, 5, 10 and 20 g/kg) and its biochar (0, 2.5, 5, 10 and 20 g/kg) on soil chemical properties of a calcareous soil and growth of bean (Phaseolus vulgaris) and maize (Zea mays) plants. In the incubation experiment, both processed poultry manure (PPM) and biochar decreased pH and the concentration of plant‐available Fe of soil but increased plant‐available P, Zn, Cu and Mn concentrations. PPM and biochar increased the concentrations of exchangeable cations (K, Ca and Mg) in soil. PPM and biochar applications increased the growth of maize and bean plants. PPM and biochar resulted in increased concentrations of N, P, K, Ca, Fe, Zn, Cu and Mn in bean plants. In maize plants, PPM and biochar applications increased the N, P, K, Zn, Cu and Mn but decreased the Ca and Mg concentrations. Results of this study reveal that poultry manure biochar can be used effectively for agricultural purposes.     

Negative priming of native soil organic carbon mineralization by oilseed biochars of contrasting quality

Oilseed‐derived biochar, a by‐product of pyrolysis for biodiesel production, is richer in aliphatic compounds than the commonly studied wood‐derived biochar, affecting both its mineralization in soil and its interaction with native soil organic carbon (nSOC). Here, we investigated the soil C sequestration potential of three different oilseed biochars derived from C₃ plant material: soyabean, castor bean and jatropha cake. The chemical composition of these biochars was determined by elemental analysis (CHN) and ¹³C NMR spectroscopy. The cumulative CO₂ efflux from 30‐day laboratory incubations of biochar mixed with a sandy soil containing nSOC from C₄ plants was measured as a proxy for mineralization rate. The relative contribution of each source to CO₂ production was calculated based on the ¹³C‐signatures of total CO₂ efflux and the source materials (soil and biochars). Our results showed that: (i) castor bean biochar contained relatively large amounts of aliphatic compounds, resulting in a greater mineralization rate than soyabean and jatropha biochars; (ii) CO₂ efflux from the soil‐biochar mixtures originated mostly from the biochars, suggesting that these biochars contain rapidly decomposable compounds; and (iii) all three oilseed biochars decelerated nSOC mineralization. This negative priming effect appeared to be caused by different factors. We conclude that oilseed biochars have the potential to increase soil C stocks directly and increase soil C sequestration indirectly in the short term through negative priming of nSOC mineralization.     

Effect of Organic Residues and Their Derived Biochars on the Zinc and Copper Chemical Fractions and Some Chemical Properties of a Calcareous Soil

ABSTRACT

Addition of more resistant organic materials, such as biochars, to soils not only enhances soil C sequestration but also can also benefit soil fertility. The aim of this study was to investigate the effect of two organic materials (sheep manure and vermicompost) and their biochars produced at two pyrolysis temperatures (300 and 500°C) applied at 5% (w/w) on the chemical fractions of Zn and Cu and some chemical characteristics of an unpolluted, light textured calcareous soil. Addition of the raw organic materials and their-derived biochars significantly enhanced plant available K, P, and Zn but significantly decreased plant available Cu in the soil. Sheep manure biochar produced at 300°C was most effective at increasing plant available P (13-fold) and K (1.9 fold) likely due to formation of more soluble forms of P and K compared to raw material or biochar produced at higher temperature (500°C). Whereas, raw vermicompost and sheep manure were most effective at enhancing plant available Zn, by increasing water soluble and exchangeable Zn fraction likely due to organic complexation. All amendments, especially biochars produced at 300°C reduced water soluble and exchangeable Cu mainly attributed to increased soil P availability. The results of this study showed that in the short-term, addition of the low-temperature biochars was best for enhancing soil P and K availability, but concomitantly reduced Cu availability the most, whereas, addition of the raw organic materials was better for enhancing Zn availability compared to the biochars.     

Effect of low‐temperature biochar derived from pig manure and poultry litter on mobile and organic matter‐bound forms of Cu,Cd, Pb and Zn in sandy soil

Numerous studies conducted so far have shown that biochar has a significant effect on physical, chemical and biological properties of soils. Biochar can be used to alleviate the effects of soil contamination with organic and inorganic compounds, for instance, to reduce the mobility of heavy metals. The aim of the research was to evaluate the effect of pig manure and poultry litter, as well as biochars produced from these materials at a temperature of 300 °C on Cu, Cd, Pb and Zn contents in mobile and organic matter‐bound forms in soil. The research was conducted under laboratory conditions. The materials were introduced into sandy acid soil in doses of 0.5, 1.0 and 2.0% w/w. The application of pig manure‐derived biochar (BPM) and poultry litter‐derived biochar (BPL), depending on the amount added, reduced the mobility of copper from 28 to 69%, from 77 to 100% in the case of cadmium, from 94 to 99% in the case of lead, and from 15 to 97% in the case of zinc. The 2% amendment of pig manure (PM) and poultry litter (PL) caused an increase in the content of Cu extracted with NH₄NO₃ in comparison with the control treatment. A similar situation was observed in the case of zinc after the application of 0.5 and 1% amendments of pig manure (PM). Cu, Cd, Pb and Zn contents extracted with 0.025 mol C₁₀H₂₂N₄O₈ were higher than contents of these elements extracted with 1 m NH₄NO₃, mainly due to different extraction force of the extractants. The obtained results indicate that, compared with the content determined in soil from the control treatment, 1 and 2% amendments of both unconverted and thermally converted materials to the soil had a greater effect on contents of Cu, Pb and Zn in the organic matter‐bound fraction than the 0.5% amendment. The organic materials applied did not affect the content of cadmium in organic matter‐bound fraction.     

Effects of biochars derived from different feedstocks and pyrolysis temperatures on soil physical and hydraulic properties

Purpose

Biochar addition to soils potentially affects various soil properties, and these effects are dependent on biochars derived from different feedstock materials and pyrolysis processes. The objective of this study was to investigate the effects of amendment of different biochars on soil physical and hydraulic properties.

Materials and methods

Biochars were produced with dairy manure and woodchip at temperatures of 300, 500, and 700 °C, respectively. Each biochar was mixed at 5 % (w/w) with a forest soil, and the mixture was incubated for 180 days, during which soil physical and hydraulic properties were measured.

Results and discussion

Results showed that the biochar addition significantly enhanced the formation of soil macroaggregates at the early incubation time. The biochar application significantly reduced soil bulk density, increased the amount of soil organic matter, and stimulated microbial activity at the early incubation stage. Saturated hydraulic conductivities of the soil with biochars, especially produced at high pyrolysis temperature, were higher than those without biochars on the sampling days. The treatments with woodchip biochars resulted in higher saturated hydraulic conductivities than the dairy manure biochar treatments. Biochar applications improved water retention capacity, with stronger effects by biochars produced at higher pyrolysis temperatures. At the same suction, the soil with woodchip biochars possessed higher water content than that with the dairy manure biochars.

Conclusions

Biochar addition significantly affected the soil physical and hydraulic properties. The effects were different with biochars derived from different feedstock materials and pyrolysis temperatures.     

Comparison of Wet-Digestion and Dry-Ashing Methods for Total Elemental Analysis of Biochar

Total elemental analyses of biochars presents challenges during digestion because of biochars' high chemical recalcitrance and widely varied composition. Three biochars were chosen with contrasting properties: corn stover pyrolyzed at 300 °C, oak wood at 600 °C, and poultry manure with sawdust at 600 °C. Recovery of phosphorus (P), potassium (K), sulfur (S), calcium (Ca), magnesium (Mg), and zinc (Zn) from poultry manure biochar was 10 to 100 times less with published wet- or dry-digestion methods than when using improved methods. The published dry-digestion method returned significantly (P < 0.05) more sodium (Na), suggesting contamination from borosilicate glassware. A modified dry-ashing (MDA) method was the most precise method, demonstrating a relative standard deviation within 3.7% of the most precise method for recovery of P, K, S, Ca, Mg, and Zn from both corn and oak biochars. The MDA method is comparatively safe and effective for preparing biochar for elemental analysis.     

Sorption of copper (II) and sulphate to different biochars before and after composting with farmyard manure

Biochar application has been suggested for reducing toxic levels of metals in contaminated soils and enhancing nutrient retention in agro‐ecosystems. We studied sorption of copper (Cu(II)) and sulphate‐sulphur (SO₄‐S) to charcoal, gasification coke and flash‐pyrolysis biochar in order to relate sorption to char properties. Furthermore, we investigated the effect of composting of charcoal and gasification coke on sorptive properties. Langmuir sorption affinity coefficients for Cu(II) for non‐composted biochars increased in the order flash‐pyrolysis char < charcoal < gasification coke. The sorption capacity for Cu(II) of the chars decreased in the order gasification coke (629 mg kg^?1) > flash‐pyrolysis char (196 mg kg^?1) > charcoal (56 mg kg^?1). Composting significantly increased the sorption affinity coefficient approximately by a factor of 5 for charcoal (up to 1.1 l mg^?1) and by a factor of 3–4 for gasification coke (up to 3.2 l mg^?1). Whereas Cu(II) sorption to gasification coke (composted or not) was largely irreversible, sorption to flash‐pyrolysis char and charcoal showed higher reversibility. Relationships between Cu(II) sorption and biochar properties such as cation exchange capacity, specific surface area or aromaticity suggest that sorption was largely determined by complexation with organic matter. Sorption of SO₄‐S was negligible by non‐composted and composted biochars. Composted gasification coke might be suited to reducing toxic Cu(II) concentrations in contaminated soils. Composted charcoal can potentially improve Cu(II) retention in a plant available form in acidic, sandy soils with small organic matter contents. Transient effects of biochars on soil pH can over‐ride the influence of sorption to biochars on concentrations of trace elements in soil solution and their availability to plants.     

Influence of Pyrolysis Temperatures on FTIR Analysis,Nutrient Bioavailability,and Agricultural use of Poultry Manure Biochars

This study was conducted to investigate the effect of pyrolysis temperature on chemical properties of poultry manure (PM) biochar over the range of 200–500°C. Chemical properties of biochar produced at 200°C were almost the same as PM, but significant changes were observed in higher-temperature-produced biochars. According to elemental and fourier transformation infrared analyses, the degree of carbonization in biochar was accelerated with increasing pyrolysis temperature. Biochar yield decreased, while its pH, cation exchange capacity, and P, K, Fe, Mn, Zn, and Cu contents increased with increasing pyrolysis temperature. The biochar produced at 400°C or 500°C was highly alkaline. Also, due to high electrical conductivity, these types of biochars may not be suitable for salt-sensitive crops. It was concluded that the pyrolysis temperature of more than 300°C reduces the quality of PM biochar for use in calcareous soils, although it may be suitable for acidic soils or environmental application.     

Designing relevant biochars as soil amendments using lignocellulosic-based and manure-based feedstocks

Purpose

Biochars are a by-product of the biofuel processing of lignocellulosic and manure feedstocks. Because biochars contain an assemblage of organic and inorganic compounds, they can be used as an amendment for C sequestration and soil quality improvement. However, not all biochars are viable soil amendments; this is because their physical and chemical properties vary due to feedstock elemental composition, biofuel processing, and particle size differences. Biochar could deliver a more effective service as a soil amendment if its chemistry was designed ex ante with characteristics that target specific soil quality issues. In this study, we demonstrate how biochars can be designed with relevant properties as successful soil amendments through feedstock selection, pyrolysis conditions, and particle size choices.

Materials and methods

Biochars were produced by pyrolysis of parent lignocellulosic feedstock sources—peanut hull (PH; Archis hypogaea), pecan shell (PS; Carya illinoensis), switchgrass (SG; Panicum virgatum), pine chips (PC; Pinus taeda), hardwood wastes (wood), and poultry litter manure (PL; Gallus domesticus), as well as blends of these feedstocks at temperatures ranging from 250 to 700 °C. Additionally, blended feedstocks were made into pellets (>2 mm) prior to pyrolysis at 350 °C. Dust-sized (<0.42 mm) biochar was obtained through grinding of pelletized biochars. After chemical characterization, the biochars were evaluated as fertility amendments in a Norfolk soil (fine-loamy, kaolinitic, thermic, Typic Kandiudult) during two different pot incubation experiments.

Results and discussion

PL biochars were alkaline and enriched in N and P, whereas biochar from lignocellulosic feedstocks exhibited mixed pH and nutrient contents. Blending PL with PC resulted in lower biochar pH values and nutrient contents. In pot experiment 1, most biochars significantly (P?<?0.05) raised soil pH, soil organic carbon, cation exchange capacity, and Mehlich 1 extractable P and K. PL biochar added at 20 g?kg^?1 resulted in excessive soil P concentrations (393 to 714 mg?kg^?1) and leachate enriched with dissolved phosphorus (DP, 22 to 70 mg?L^?1). In pot experiment 2, blended and pelletized PL with PC feedstock reduced soil pH and extractable soil P and K concentrations compared to pot experiment 1. Water leachate DP concentrations were significantly (P?<?0.05) reduced by pelletized biochar blends.

Conclusions

Short-term laboratory pot experiments revealed that biochars can have different impacts at modifying soil quality characteristics. Keying on these results allowed for creating designer biochars to address specific soil quality limitations. In the process of manufacturing designer biochars, first, it is important to know what soil quality characteristics are in need of change. Second, choices between feedstocks, blends of these feedstocks, and their accompanying particle sizes can be made prior to pyrolysis to create biochars tailored for addressing specific soil quality improvements. Utilization of these principles should allow for effective service of the designed biochar as a soil amendment while minimizing unwanted ex facto soil quality changes and environmental effects.     

Effect of phosphorus‐enriched biochar and poultry manure on growth and mineral composition of lettuce (Lactuca sativa L. cv.) grown in alkaline soil

The use of pyrolysis products of manures gives positive effects on soil fertility, crop productivity and soil carbon sequestration. However, effects depend on soil characteristics, plant species and the raw material from which the biochar is derived, and some negative effects of biochar have been reported. The objective of this study was to evaluate the effectiveness of poultry manure (PM)‐derived biochar on the growth, and P, N, K, Ca, Mg, Fe, Zn, Cu and Mn concentration of lettuce (Lactuca sativa L.) plant. The treatments as follows: control, 20 g/kg poultry manure (PM), 20 g/kg phosphorus‐enriched poultry manure (PM+P), 10 g/kg Biochar (B), 10 g/kg Biochar+P (B+P). Application of biochar and PM significantly increased lettuce growth, and P‐enriched forms of PM and biochar gave the higher growth. PM has no significant effect on the N concentrations but biochar and, P‐enriched PM and biochar treatments significantly increased N concentrations. Phosphorus concentration of the lettuce leaves significantly increased by PM and biochar treatments. Plant K concentrations were also increased by PM and biochar, and their P‐enriched forms. Leaf Ca and Mg concentrations were lower in Biochar and B+P treatments than that of PM and PM+P treatments. Compared to control and PM treatments, biochar applications reduced Fe, Zn, Mn and Cu concentrations of the lettuce plants. The results of this study indicated that application of biochar to alkaline soil is beneficial for crop growth and N, P and K nutrition, but it certainly reduced Fe, Cu, Zn and Mn nutrition of lettuce.     

Effects of biochars produced from different feedstocks on soil properties and sunflower growth

The use of biochar as a soil amendment is gaining interest to mitigate climate change and improve soil fertility and crop productivity. However, studies to date show a great variability in the results depending on raw materials and pyrolysis conditions, soil characteristics, and plant species. In this study, we evaluated the effects of biochars produced from five agricultural and forestry wastes on the properties of an organic‐C‐poor, slightly acidic, and loamy sand soil and on sunflower (Helianthus annuus L.) growth. The addition of biochar, especially at high application rates, decreased soil bulk density and increased soil field capacity, which should impact positively on plant growth and water economy. Furthermore, biochar addition to soil increased dissolved organic C (wheat‐straw and olive‐tree‐pruning biochars), available P (wheat‐straw biochar), and seed germination, and decreased soil nitrate concentration in all cases. The effects of biochar addition on plant dry biomass were greatly dependent upon the biochar‐application rate and biochar type, mainly associated to its nutrient content due to the low fertility of the soil used. As a result, the addition of ash‐rich biochars (produced from wheat straw and olive‐tree pruning) increased total plant dry biomass. On the other hand, the addition of biochar increased the leaf biomass allocation and decreased the stem biomass allocation. Therefore, biochar can improve soil properties and increase crop production with a consequent benefit to agriculture. However, the use of biochar as an amendment to agricultural soils should take into account its high heterogeneity, particularly in terms of nutrient availability.     

Biochars influence sweet‐potato yield and nutrient uptake in tropical Papua New Guinea

Currently, the biomass of an invasive and obnoxious weed, kunai grass (Imperata cylindrica), is uncontrollably burnt in Papua New Guinea in subsistence farming systems resulting in unwarranted negative environmental consequences. We explored the possibility of sustainable utilization of biochar produced from the weed biomass along with a standard feedstock‐rice husk (Oryza sativa). Biochars were produced with lab‐scale pyrolysis at 550°C, characterized for chemical properties and plant nutrient composition. Further, agronomic efficacy of soil incorporation of biochars (5 t ha^?1) or co‐applied with mineral fertilizers (100, 11, and 62 kg ha^?1 N, P, K, respectively) was tested for sweet potato (Ipomoea batatas L. Lam) in a field experiment. The two biochars differed significantly (P < 5%) with respect to recovery from the feedstocks, chemical characters and nutrient composition. Kunai grass biochar was poorer in nutrients (< 1%) with distinctly alkaline pH and higher electrical conductivity. Biochar amendment to soil showed significant (P < 5%) improvement of soil moisture, while co‐application of biochars along with mineral fertilizers showed soil moisture decrease. Biochar amendment improved the growth parameters and total tuber yield of sweet potato by about 20%, while co‐application with mineral fertilizers augmented total tuber yield by 100% and above‐ground biomass yields by > 75%. Besides, improving agronomic performance of sweet potato crop, co‐application of biochars with mineral fertilizers enhanced uptake of N, P, K, Ca, Mg, and S. Production and utilization of biochar in sweet‐potato production could offer an efficient means of disposing biomass of kunai grass with concomitant productivity improvement in Papua New Guinea.     

Effect of synthetic nano-hydroxyapatite as an alternative phosphorus source on growth and phosphorus nutrition of lettuce (Lactuca sativa L.) plant

Phosphorus (P) is one of the least available mineral nutrients to the plants in calcareous and alkaline soils. In this study, we investigated the synthesis, characterization and use of synthetic nano-hydroxyapatite (NHA), P uptake by plants as well as its residual effects. Soluble P source (H₃PO₄) was also included as treatment for comparison. NHA prepared by wet chemical techniques, characterized by Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM) and elemental dispersive X-ray (EDX) analysis. NHA and H₃PO₄ were applied at a rate of 200 mg kg^?1 to find out their effects on phosphorus nutrition and growth of lettuce on the low and high calcareous soil. In addition to this, residual effects of NHA and H₃PO₄ were also determined for lettuce plants grown after first lettuce plants in the both soil. Dry weights of the first and second lettuce plants grown in low and high calcareous soil were significantly increased by applied phosphorus regardless of the source. NHA seems to be more effective than that of ordinary phosphorus source (H₃PO₄-P) on growth and P concentration of the lettuce plants. The promising results of this study needs to be supported with long term field studies regarding the uptake, translocation and interactions of nano-P with the other elements.     

Influence of nitrogen fertilizer forms and crop straw biochars on soil exchange properties and maize growth on an acidic Ultisol

Effects of repeated application of urea (UN) and calcium nitrate (CN) singly and together with crop straw biochars on soil acidity and maize growth were investigated with greenhouse pot experiments for two consecutive seasons. Canola straw biochar (CB), peanut straw biochar (PB) and wheat straw biochar (WB) were applied at 1% of dried soil weight in the first season. N fertilizers were applied at 200 mg N kg^?1. In UN treatments, an initial rise in pH was subjected to proton consumption through urea hydrolysis, afterwards nitrification of NH₄⁺ caused drastic reductions in pH as single UN had soil pH of 3.70, even lower than control (4.27) after the 2nd crop season. Post-harvest soil analyses indicated that soil pH, soil exchangeable acidity, NH₄⁺, NO₃^? and total base cations showed highly significant variation under N and biochar types (P < 0.05). Articulated growth of plants under combined application with biochars was expressed by 22.7%, 22.5%, and 35.7% higher root and 25.6%, 23.8%, and 35.9% higher shoot biomass by CB, PB and WB combined with CN over UN, respectively. Therefore, CN combined with biochars is a better choice to correct soil acidity and improve maize growth than UN combined with biochars.     

A new 3D conceptual structure modeling of biochars by molecular mechanic and molecular dynamic simulation

Purpose

The combination of analytical chemistry and simulation methods provides more complete information about biochars.

Materials and methods

The biochars prepared by pyrolysis of the crop straw at 300 and 500 °C were investigated by elemental analysis, pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS) and solid-state ¹³C nuclear magnetic resonance (NMR) spectrometry to build the 2D structural models of biochars. The most stable and balanced 3D conformations were gained by optimizing in the optimized potential for liquid simulation (OPLS) force field of molecular mechanic and molecular dynamic simulation of HyperChem® software.

Results and discussion

There were few O-containing and N-containing compounds in biochars. According to the results of Py-GC-MS, 41 and 28 pyrolysis products were identified for the building of the conceptual models of 300 and 500 °C biochars. Solid-state ¹³C NMR data also demonstrated that there were very high values of unsaturated C in biochars. The agreement between elemental concentration and chemical functional groups of two simulated models and experimental biochars was successfully achieved. Quantitative structure activity relationship (QSAR) properties were calculated and indicated the correlation of molecular structures with properties such as surface area, volume, polarizability, refractivity, and hydration energy.

Conclusions

The conceptual structural models of corn straw biochars produced at 300 and 500 °C were C₇₈H₆₈N₂O₂₅ and C₅₉H₂₉NO₁₀, respectively. The simulation results showed that the 3D structure of the 300 °C biochar with ?4 charges and the nonprotonated 3D structure of the 500 °C biochar were the most stable. Deprotonation reaction is an endothermic process.

     

Sorption of Phosphorus from Swine,Dairy, and Poultry Manures

In most phosphorus (P) sorption studies, P is added as an inorganic salt to a predefined background solution such as calcium chloride (CaCl₂) or potassium chloride (KCl); however, in many regions, the application of P to agricultural fields is in the form of animal manure. The purpose of this study, therefore, was to compare the sorption behavior of dissolved reactive P (DRP) in monopotassium phosphate (KH₂PO₄)–amended CaCl₂ and KCl solutions with sorption behavior of DRP in three different animal manure extracts. Phosphorus single‐point isotherms (PSI) were conducted on eight soils with the following solutions: KH₂PO₄‐amended 0.01 M CaCl₂ solution, KH₂PO₄‐amended 0.03 M KCl solution, water‐extracted dairy manure, water‐extracted poultry litter, and swine lagoon effluent. The PSI values for the dairy manure extract were significantly lower than the CaCl₂ solution for all eight soils and lower than the KCl solution for six soils. The PSI values were significantly higher, on the other hand, for poultry litter extract and swine effluent than the inorganic solutions in four and five of the soils, respectively. Our observations that the sorption of DRP in manure solutions differs significantly from that of KH₂PO₄‐amended CaCl₂ and KCl solutions indicates that manure application rates based on sorption data collected from inorganic P salt experiments may be inaccurate.     

Effects of Soil Application of Different Biochars on Selected Soil Chemical Properties

An incubation study was conducted to determine if biochars created using different feedstocks and under different reactor conditions would differentially influence specific soil chemical properties. A Nicollet surface soil (fine-loamy, mixed, superactive, mesic Aquic Hapludoll) was mixed with 17 different biochars and a nitrogen fertilizer (urea). The biochars were created with different feedstocks and different reactor conditions. Soil tests for total nitrogen (N), total organic carbon (C), ammonium N (NH₄ ⁺-N), and nitrate N (NO₃ ^?-N) were run. Results show that the feedstock used to create the biochar influenced how it affected the specific soil chemical properties measured. Results also suggest that the conditions within the reactor influence how the biochar will affect the soil chemical properties measured.     

Corn growth and nitrogen nutrition after additions of biochars with varying properties to a temperate soil

The effects of biochar properties on crop growth are little understood. Therefore, biochar was produced from eight feedstocks and pyrolyzed at four temperatures (300°C, 400°C, 500°C, 600°C) using slow pyrolysis. Corn was grown for 46 days in a greenhouse pot trial on a temperate and moderately fertile Alfisol amended with the biochar at application rates of 0.0%, 0.2%, 0.5%, 2.0%, and 7.0% (w/w) (equivalent to 0.0, 2.6, 6.5, 26, and 91 t biochar ha⁻¹) and full recommended fertilization. Animal manure biochars increased biomass by up to 43% and corn stover biochar by up to 30%, while food waste biochar decreased biomass by up to 92% in relation to similarly fertilized controls (all P < 0.05). Increasing the pyrolysis temperature from 300°C to 600°C decreased the negative effect of food waste as well as paper sludge biochars. On average, plant growth was the highest with additions of biochar produced at a pyrolysis temperature of 500°C (P < 0.05), but feedstock type caused eight times more variation in growth than pyrolysis temperature. Biochar application rates above 2.0% (w/w) (equivalent to 26 t ha⁻¹) did generally not improve corn growth and rather decreased growth when biochars produced from dairy manure, paper sludge, or food waste were applied. Crop N uptake was 15% greater than the fully fertilized control (P < 0.05, average at 300°C) at a biochar application rate of 0.2% but decreased with greater application to 16% below the N uptake of the control at an application rate of 7%. Volatile matter or ash content in biochar did not correlate with crop growth or N uptake (P > 0.05), and greater pH had only a weak positive relationship with growth at intermediate application rates. Greater nutrient contents (N, P, K, Mg) improved growth at low application rates of 0.2% and 0.5%, but Na reduced growth at high application rates of 2.0% and 7.0% in the studied fertile Alfisol.     

Effects of biochars and hydrochars produced from lignocellulosic and animal manure on fertility of a Mollisol and Entisol

Biochar and hydrochars (HC) are emerging soil fertility amendments; however, their ability to improve fertility levels in soils possessing vastly different pedogenic characteristics has not been well investigated. In this study, several plant and manure biochars and two blended HC applied at 3.84 g/kg (ca.10 t/ha) were incubated in pots containing a highly fertile‐Mollisol (Waukegan series; Sandy‐skeletal, mixed, superactive, mesic Typic Hapludoll) and an infertile Entisol (Margate series; Siliceous, hyperthermic, Mollic Psammaquent). During the 124–125 day laboratory incubations, pots were leached four times with deionized H₂O with the leachates analysed for the concentrations of dissolved phosphorus (DP) and potassium (DK). After the incubations, both soils were analysed for fertility characteristics (i.e. pH, cation‐exchange capacity (CEC), and extractable P and K). In both soils after biochar additions, there were mixed pH and CEC responses. Both the Mollisol and Entisol treated with swine solid biochar had greater plant extractable P and K contents, which was reflective of the elevated P and K contents in the swine solid biochar. However, most biochars and HC additions to the Mollisol and Entisol had minimal impact on soil fertility characteristics indicating a low direct fertilization potential. These nutrient contents could be altered through feedstock blending to target a particular fertilizer requirement.