Synthesis of meso‐Pyrrole‐Substituted 22‐Oxacorroles by a “3+2” Approach

Unsymmetrical 22‐oxacorrole containing two aryl groups and one pyrrole group at the meso position was synthesized by condensing one equivalent of 16‐oxatripyrrane with one equivalent of meso aryl dipyromethane under mild acid‐catalyzed conditions followed by oxidation with 2,3‐dichloro‐5,6‐dicyano‐1,4‐benzoquinone (DDQ). This [3+2] condensation approach was expected to yield meso‐free 25‐oxasmaragdyrin but unexpectedly afforded unsymmetrical meso‐pyrrole‐substituted 22‐oxacorrole. We demonstrated the versatility of the reaction by synthesizing four new meso‐pyrrole‐substituted 22‐oxacorroles. The reactivity of α‐position of meso‐pyrrole was tested by carrying out various functionalization reactions such as bromination, formylation, and nitration and obtained the functionalized meso‐pyrrole‐substituted 22‐oxacorroles in decent yields. The X‐ray structure obtained for one of the functionalized meso‐pyrrole substituted 22‐oxacorrole revealed that the macrocycle was nearly planar and the meso‐pyrrole was in the perpendicular orientation with respect to the macrocyclic plane. The meso‐pyrrole‐substituted 22‐oxacorroles absorb strongly in 400–700 nm region with one strong Soret band and four weak Q bands. The 22‐oxacorroles are strongly fluorescent and showed emission maxima at ≈650 nm with decent quantum yields and singlet‐state lifetimes. The 22‐oxacorroles are redox‐active and exhibited three irreversible oxidations and one or two reversible reduction(s). A preliminary biological study indicated that meso‐pyrrole corroles are biocompatible.     

Bispyrrolylbenzene Anion Receptor: From Supramolecular Switch to Molecular Logic Gate

We have designed anion receptor 4 based on a conformationally labile bispyrrolylbenzene framework, the conformation of which can be changed by appropriate anionic stimuli. In the absence of fluoride anion, the pyrrole moieties rotate freely at room temperature. However, when the concentration of fluoride anion exceeds 2 equivalents, the rotation of the pyrrole units slows down and the conformation of the receptor changes to anti‐anti. DFT calculations have shown that this change is due to binding of a third fluoride anion through C?H interaction. Anion receptor 4 can also serve as a molecular logic gate. Anionic inputs such as fluoride and dihydrogenphosphate allow the realization of INHIBIT and NAND logic gate functions with absorption and fluorescence as readouts, respectively.     

New photoluminescent conjugated polymers with 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (DPP) and 1,4‐phenylene units in the main chain

A series of π‐conjugated polymers and copolymers containing 1,4‐dioxo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole (also known as 2,5‐dihydro‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole‐1,4‐dione) (DPP) and 1,4‐phenylene units in the main chain is described. The polymers are synthesised using the palladium‐catalysed aryl‐aryl coupling reaction (Suzuki coupling) of 2,5‐dihexylbenzene‐1,4‐diboronic acid with 1,4‐dioxo‐2,5‐dihexyl‐3,6‐di(4‐bromophenyl)pyrrolo[3,4‐c]pyrrole and 1,4‐dibromo‐2,5‐dihexylbenzene in different molar ratios. Soluble hairy rod‐type polymers with molecular weights up to 21 000 are obtained. Polymer solutions in common organic solvents such as chloroform or xylene are of orange colour (λ_max = 488 nm) and show strong photoluminescence (λ_max = 544 nm). The photochemical stability is found to be higher than for corresponding saturated polymers containing isolated DPP units in the main chain. Good solubility and processability into thin films render the compounds suitable for electronic applications.     

Effects of ion pairing on the capillary electrophoretic separation and ultraviolet‐absorption detection of quaternary ammonium cations using meso‐octamethylcalix[4]pyrrole as the background electrolyte additive

Five quaternary ammonium cations, including tetramethylammonium, tetraethylammonium, hexadecyltrimethylammonium, benzyltrimethylammonium, and 1‐butyl‐3‐methylimidazolium, have been separated by capillary electrophoresis. A direct ultraviolet method has been achieved when tetrabutylammonium fluoride was the background electrolyte and meso‐octamethylcalix[4]pyrrole was the background electrolyte additive. The ultraviolet spectra of meso‐octamethylcalix[4]pyrrole and cation mixtures showed that redshifts can be attributed to the size of cations, and the maximum absorption wavelength shifted from 218 to 230 nm when tetrabutylammonium cation was substituted with tetramethylammonium cation or tetraethylammonium cation. Conductivity measurements were performed to evaluate the ion‐pairing effect of tetrabutylammonium fluoride in a mixture of acetonitrile/ethanol (80:20, v/v), and the ion‐pairing formation constant, K_ip, was calculated (K_ip = 14.8 ± 0.3 L/mol) using the Fuoss extended model. Ion pairing also occurs between cations of the analytes and counterion, a fluoride complex of meso‐octamethylcalix[4]pyrrole. The tetramethylammonium cations associate more strongly with this counterion than the tetraethylammonium cation that contributes to the change of selectivity in capillary electrophoresis separation. The effective mobilities of the cations with trimethyl groups, such as tetramethylammonium cation, benzyltrimethylammonium cation, and hexadecyltrimethylammonium cation, decreased faster than others with the increase of meso‐octamethylcalix[4]pyrrole concentration, highlighting the fact that the ion‐pairing effect played an important role in this method.     

Pyrrolo[3,2‐b]pyrroles—From Unprecedented Solvatofluorochromism to Two‐Photon Absorption

A combined experimental and theoretical study of the two‐photon absorption (2PA) properties of a series of quadrupolar molecules possessing a highly electron‐rich heterocyclic core, pyrrolo[3,2‐b]pyrrole, is presented. In agreement with quantum‐chemical calculations, large 2PA cross‐section values, σ_2PA≈10²–10³ GM (1 GM=10⁵⁰ cm⁴ s photon^?1), are observed at wavelengths of 650–700 nm, which correspond to the two‐photon allowed but one‐photon forbidden transitions. The calculations also predict that increased planarity of this molecule through removal of two N‐substituents leads to further increase in the σ_2PA values. Surprisingly, the most quadrupolar pyrrolo[3,2‐b]pyrrole derivative, containing two 4‐nitrophenyl substituents at positions 2 and 5, demonstrates a very strong solvatofluorochromic effect, with a fluorescence quantum yield as high as 0.96 in cyclohexane, whereas the fluorescence vanishes in DMSO.     

Synthesis and two‐photon absorption properties of hyperbranched diketo‐pyrrolo‐pyrrole polymer with triphenylamine as the core

A novel hyperbranched polyyne (hb‐ DPP ) with triphenylamine as the core, 2,5‐dioctylpyrrolo [3,4‐c]pyrrole‐1,4 (2H,5H)‐dione ( DPP ) as the connecting unit has been designed and synthesized by Glaser‐Hay oxidative coupling reaction, which was characterized by IR, NMR, UV‐vis, FL, and GPC. The polymer exhibits high molecular weight (M_w up to ～6.55 × 10⁴ Da) and is readily soluble in common organic solvents such as toluene, chloroform, tetrahydrofuran, N,N‐dimethyl formamide and so on. The one‐ and two‐photon absorption (TPA) properties have been investigated. The TPA cross section of the polymer was measured by open‐aperture Z‐scan experiment using 140 femtosecond (fs) pulse, and the TPA cross section for hb‐ DPP was determined to be 579 GM per repeating unit at wavelength of 800 nm. In tetrahydrofuran, hb‐ DPP exhibits intense frequency up‐converted fluorescence with the peak located at 584 nm under the excitation of 800 nm fs pulses. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4400–4408, 2009     

Self‐assembled anionic micellar template for polypyrrole,polyaniline, and their random copolymer nanomaterials

We report an anionic surfactant approach for size and shape control in polyaniline, polypyrrole, and their polyaniline‐co‐polypyrrole random copolymer nanomaterials. A renewable resource azobenzenesulfonic acid anionic surfactant was developed for template‐assisted synthesis of these classes of nanomaterials. The surfactant exists as 4.3 nm micelle in water and self‐organizes with pyrrole to produce spherical aggregates. The sizes of the spherical aggregates were controlled by water dilution and subsequent oxidation of these templates, produced polypyrrole nanospheres of 0.5 μM to 50 nm dimensions. The anionic surfactant interacts differently with aniline and forms cylindrical aggregates, which exclusively produce nanofibers of ∼180 nm in diameter with length up to 3–5 μM. The template selectivity of surfactant toward aniline and pyrrole was used to tune the nanostructure of the aniline‐pyrrole random copolymers from nanofiber‐to‐nanorod‐to‐nanospheres. Dynamic light scattering technique and electron microscopes were used to study the mechanistic aspects of the template‐assisted polymerization. The four probe conductivity of the copolymers showed a nonlinear trend and the conductivity passes through minimum at 60–80% of pyrrole in the feed. The amphiphilic dopant effectively penetrates into the crystal lattices of the polymer chain and induces high solid state ordering in the homopolymer nanomaterials. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 830–846, 2009     

Synthesis and characterization of L‐leucine containing chiral vinyl monomer and its polymer,poly(2‐(methacryloyloxyamino)‐4‐methyl pentanoic acid)

A chiral monomer containing L ‐leucine as a pendant group was synthesized from methacryloyl chloride and L ‐leucine in presence of sodium hydroxide at 4 °C. The monomer was polymerized by free radical polymerization in propan‐2‐ol at 60 °C using 2,2′‐azobis isobutyronitrile (AIBN) as an initiator under nitrogen atmosphere. The polymer, poly(2‐(Methacryloyloxyamino)‐4‐methyl pentanoic acid) is thus obtained. The molecular weight of the polymer was determined to be: M_w is 6.9 × 10³ and M_n is 5.6 × 10³. The optical rotation of both chiral monomer and its polymer varies with the solvent polarity. The amplification of optical rotation due to transformation of monomer to polymer is associated with the ordered conformation of chiral monomer unit in the polymeric chain due to some secondary interactions like H‐bonding. The synthesized monomer and polymer exhibit intense Cotton effect at 220 nm. The conformation of the chain segments is sensitive to external stimuli, particularly the pH of the medium. In alkaline medium, the ordered chain conformation is destroyed resulting disordered random coils. The ordered coiling conformation is more firmly present on addition of HCl. The polymer exhibits swelling‐deswelling characteristics with the change of pH of the medium, which is reversible. The Cotton effect decreases linearly with the increase of temperature which is reversible on cooling. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 2228–2242, 2009     

Phthalimide as a chromophoric tag in the circular dichroism determination of absolute configuration of α-aminoacid amides and dipeptides. A case of a dipeptide isostructurality

Both N-phthaloyl aminoacid amides and methyl amides as well as N-phthaloyl dipeptide methyl esters give Cotton effects of opposite signs at around 220 and 240 nm. The signs of these Cotton effects are directly correlated with the absolute configuration of the N-phthaloyl substituted stereogenic center: for -configuration the Cotton effect at 240 nm is positive and the Cotton effect at 220 is negative. The X-ray analysis shows that the diastereomeric , and , N-phthaloyl alanylvaline methyl esters form isostructural orthorombic crystals due to the conformational flexibility of the molecules and a similar space requirements of the methoxycarbonyl and isopropyl groups.     

In situ polymerization and morphology of polypyrrole obtained in water‐soluble polymer templates

Several water‐soluble polymers were used as templates for the in situ polymerization of pyrrole to determine their effect on the generation of nanosized polypyrrole (PPy) particles. The polymers used include: polyvinyl alcohol (PVA), polyethylene oxide (PEO), poly(vinyl butyral), polystyrene sulfonic acid, poly(ethylene‐alt‐maleic anhydride) (PEMA), poly(octadecene‐alt‐maleic anhydride), poly(N‐vinyl pyrrolidone), poly(vinyl butyral‐co‐vinyl alcohol‐co‐vinyl acetate), poly(N‐isopropyl acrylamide), poly(ethylene oxide‐block‐propylene oxide), hydroxypropyl methyl cellulose, and guar gum. The oxidative polymerization of pyrrole was carried out with FeCl₃ as an oxidant. The morphology of PPy particles obtained after drying the resulting aqueous dispersions was examined by optical microscopy, and selected samples were further analyzed via atomic force microscopy. Among the template polymers, PVA was the most efficient in generating stable dispersions of PPy nanospheres in water, followed by PEO and PEMA. The average size of PPy nanospheres was in the range of 160 nm and found to depend on the molecular weight and concentration of PVA. Model reactions and kinetics of the polymerization reaction of pyrrole in PVA were carried out by hydrogen ¹H NMR spectroscopy using ammonium persulfate as an oxidant. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Two modes of asymmetric polymerization of phenylacetylenes having an L‐amino alcohol residue and two hydroxy groups

Four novel chiral phenylacetylenes having an L ‐amino alcohol residue and two hydroxymethyl groups were synthesized and polymerized by an achiral catalyst ((nbd)Rh⁺[η⁶‐(C₆H₅)B^?(C₆H₅)₃]) or a chiral catalytic system ([Rh(nbd)Cl]₂/(S)‐ or (R)‐phenylethylamine ((S)‐ or (R)‐PEA)). The two resulting polymers having an L ‐valinol or L ‐phenylalaninol residue showed Cotton effects at wavelengths around 430 nm. This observation indicated that they had an excess of one‐handed helical backbones. Positive and negative Cotton effects were observed only for the polymers having an L ‐valinol residue produced by using (R)‐ and (S)‐PEA as a cocatalyst, respectively, although the monomer had the same chirality. Even when the achiral catalyst was used, the two resulting polymers having an L ‐valinol or L ‐phenylalaninol residue showed Cotton effects despite the long distance between the chiral groups and the main chain. We have found the first example of a new type of chiral monomer, that is, a chiral phenylacetylene monomer having an L ‐amino alcohol residue and two hydroxy groups that was suitable for both modes of asymmetric polymerization, that is, the helix‐sense‐selective polymerization ( HSSP ) with the chiral catalytic system and the asymmetric‐induced polymerization ( AIP ) with the achiral catalyst. The other two monomers having L ‐alaninol and L ‐tyrosinol were found to be unsuitable to neither HSSP nor AIP because of their polymers' low solubility. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Synthesis of three new 1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl) pyrrole‐based donor polymers and their bulk heterojunction solar cell applications

A series of three new 1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole‐based polymers such as poly[1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole] ( PTPT ), poly[1,4‐(2,5‐bis(octyloxy)phenylene)‐alt‐5,5'‐(1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole)] ( PPTPT ), and poly[2,5‐(3‐octylthiophene)‐alt‐5,5'‐(1‐(2,6‐diisopropylphenyl)‐2,5‐di(2‐thienyl)pyrrole)] ( PTTPT ) were synthesized and characterized. The new polymers were readily soluble in common organic solvents and the thermogravimetric analysis showed that the three polymers are thermally stable with the 5% degradation temperature >379 °C. The absorption maxima of the polymers were 478, 483, and 485 nm in thin film and the optical band gaps calculated from the onset wavelength of the optical absorption were 2.15, 2.20, and 2.13 eV, respectively. Each of the polymers was investigated as an electron donor blending with PC₇₀BM as an electron acceptor in bulk heterojunction (BHJ) solar cells. BHJ solar cells were fabricated in ITO/PEDOT:PSS/polymer:PC₇₀BM/TiO_x/Al configurations. The BHJ solar cell with PPTPT :PC₇₀BM (1:5 wt %) showed the power conversion efficiency (PCE) of 1.35% (J_sc = 7.41 mA/cm², V_oc = 0.56 V, FF = 33%), measured using AM 1.5G solar simulator at 100 mW/cm² light illumination. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

BOIMPYs: Rapid Access to a Family of Red‐Emissive Fluorophores and NIR Dyes

A fundamental, highly fluorescent, and easily accessible scaffold derived from the BODIPY core is reported. The use of benzimidazole as a bridging ligand at the meso position enables the binding of two BF₂ units to provide sufficient rigidity and enhanced electron‐withdrawing strength. Absorption and emission events thus take place in the red (λ≈600 nm); the fluorescence quantum yields can reach unity (0.96) and show little dependence on solvent polarity. The synthetic route was shortened to two steps starting from commercially available precursors while the preparation is modular and tolerates various pyrrole and benzimidazole moieties. Fluoride replacement by propynyl groups, various halogenations, as well as Knoevenagel‐type condensations were applied to extend the versatility of these new photostable fluorophores, which we termed BOIMPYs.     

Synthesis and characterization of new sulfone‐derivatized phenylenevinylene‐based conjugated copolymers with evolving energy levels and gaps

A new series of stable, processable, and chain end functionalizable sulfone‐derivatized phenylenevinylene‐based conjugated polymers (SFPVs) containing different donor type comonomers have been synthesized and characterized. The polymer main chains are consisted of a sulfone‐phenylene electron accepting unit coupled with an electron donating unit which is derived from one of the dialdehyde comonomers based on benzene, thiophene, and pyrrole (with or without alkoxy side chains). The optical energy gaps (E_g) of the new polymers (in solvent) are in a range of 1.9–2.3 eV, with the lowest energy gap obtained from the polymer containing pyrrole as the donor unit. By using a combination of strong donor unit (such as pyrrole) and a relatively weak but stable acceptor unit (sulfone‐substituted benzene), E_g of the conjugated polymers can be tailored to below 2 eV, while the vinylene bonds on the polymer main chain are still chemically stable to survive strong basic conditions as compared with the S,S‐dioxo‐thiophene‐based PTV polymers developed earlier for potential supra‐molecular block copolymer systems. The lowest energy gap P(Pyrrole‐SFPV) exhibited 10 times better photoelectric power conversion efficiency than P(TV‐SFPV). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Brønsted acid catalyzed cyclization of hydroxylated enynes: a concise synthesis of five-membered heterocycles

A mild and direct pathway for the formation of five‐membered heterocyclic compounds from hydroxylated enynes has been developed. In this reaction, hydroxylated enynes were selectively transformed into five‐membered heterocyclic compounds 2 , with an allene moiety at the 3‐position, in the presence of F₃CSO₃H (0.1 mol %). When R¹, R²=Ph, diphenylvinyl‐2,3‐dihydro‐1H‐pyrrole ( 2 y ) was obtained. With HSbF₆ (5 mol %) as the catalyst, polycyclic skeletons 3 and 4 with adjacent stereocenters were obtained. When R¹=H and R²=styrene, 1,3‐dienyl‐2,5‐dihydro‐1H‐pyrrole ( 6 as ) was formed. This Brønsted acid catalyzed domino process involves the formation of an allene carbocation intermediate, which can be readily trapped by olefins to give various novel five‐membered heterocyclic skeletons.     

Shock tube pyrolysis of pyrrole and kinetic modeling

The kinetics of pyrolysis of pyrrole dilute in argon have been studied in a single pulse shock tube, using capillary column GC, together with GC/MS and FTIR for product identification, over the temperature range 1200–1700 K, total pressures of 7.5–13.5 atm and nominal mixture compositions of pyrrole of 5000 and 700 ppm (nominal concentrations of 5 × 10^?7 and 7 × 10^?8 mol cm^?3). Time-resolved measurements of the rate of disappearance of pyrrole behind reflected shock waves have been made by absorption spectroscopy at 230 nm, corresponding to the lowest ¹π* ← ¹π transition of pyrrole at pressures of 20 atm and mixture compositions between 1000–2000 ppm pyrrole (1.7–3.0 × 10^?7 mol cm^?3) over the temperature range of 1300 to 1700 K. At the lower end of the studied temperature range, the isomers of pyrrole, allyl cyanide and cis- and trans-crotononitrile, were the principal products, together with hydrogen cyanide and propyne/allene. At elevated temperatures, acetylene, acetonitrile, cyanoacetylene, and hydrogen became important products. The rate of overall disappearance of pyrrole, as measured by absorption spectrometry, was found to be first order in pyrrole concentration, with a rate constant k_dis(pyrrole) = 10^14.1±0.7 exp(?74.1 ± 3.0 kcal mol^?1/RT) s^?1 between 1350–1600 K and at a pressure of 20 atm. First order dependence of pyrrole decomposition and major product formation was also observed in the single pulse experiments over the range of mixture compositions studied. A 75-step reaction model is presented and shown to substantially fit the observed temperature profiles of the major product species and the reactant profile. In the model the initiation reaction is postulated to be the reversible formation of pyrrolenine, (2H-pyrrole). Pyrrolenine can undergo ring scission at the C2? N bond forming a biradical which can rearrange to form allyl cyanide and crotononitrile or undergo decomposition to form HCN and C₃H₄ or acetylene and a precursor of acetonitrile. The model predicts an overall rate of disappearance of pyrrole in agreement with the experimental measurements.     

Ferroelectric switching and electrochemistry of pyrrole substituted trialkylbenzene‐1,3,5‐tricarboxamides

We explore a new approach to organic ferroelectric diodes using a benzene‐tricarboxamide (BTA) core connected with C10 alkyl chains to pyrrole groups, which can be polymerized to provide a semiconducting ferroelectric material. The compound possesses a columnar hexagonal liquid crystalline (LC) phase and exhibits ferroelectric switching. At low switching frequencies, an additional process occurs, which leads to a high hysteretic charge density of up to ～1000 mC/m². Based on its slow rate, the formation of gas bubbles, and the emergence of characteristic polypyrrole absorption bands in the UV–Vis–NIR, the additional process is identified as the oxidative polymerization of pyrrole groups, enabled by the presence of amide groups. Polymerization of the pyrrole groups, which is essential to obtain semiconductivity, is limited to thin layers at the electrodes, amounting to ～17 nm after cycling for 21 h. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 673–683     

3,5‐Dihydro‐2H‐thieno[2,3‐c]pyrrole 1,1‐Dioxide – A New Simple Pyrrole Unit. Preliminary Communication

2,3‐Dihydrothiophene 1,1‐dioxide (‘2‐sulfolene’) reacted with tosylmethyl isocyanide (TsMIC) in the presence of a base to give the hitherto unknown 3,5‐dihydro‐2H‐thieno[2,3‐c]pyrrole 1,1‐dioxide (‘β′‐sulfolenopyrrole’) from the expected cyclocondensation. A serendipitous formation of this β′‐sulfolenopyrrole was found earlier, when we investigated synthetic routes to a 3,5‐dihydro‐1H‐thieno[3,4‐c]pyrrole 2,2‐dioxide (a ‘β″‐sulfolenopyrrole’) from TsMIC and 2,5‐dihydrothiophene 1,1‐dioxide (‘3‐sulfolene’). Here, we present the synthesis and characterization of β′‐sulfolenopyrrole. The X‐ray crystal‐structure analyses of β′‐sulfolenopyrrole and the isomeric β″‐sulfolenopyrrole are also reported here. This β′‐sulfolenopyrrole is a new type of a functionalized pyrrole, which is likely to be of interest for pharmaceutical purposes.     

Design and synthesis of dithieno[3,2‐b:2′3′‐d]pyrrole‐based conjugated polymers for photovoltaic applications: consensus between low bandgap and low HOMO energy level

A strategy of the fine‐tuning of the degree of intrachain charge transfer and aromaticity of polymer backbone was adopted to design and synthesize new polymers applicable in photovoltaics. Three conjugated polymers P1 , P2 , and P3 were synthesized by alternating the electron‐donating dithieno[3,2‐b:2′3′‐d]pyrrole (D) and three different electron‐accepting (A) segments ( P1 : N‐(2‐ethylhexyl)phthalimide; P2 : 1,4‐diketo‐3,6‐diphenylpyrrolo[3,4‐c]pyrrole; and P3 : thiophene‐3‐hexyl formate) in the polymer main chain. Among the three polymers, P2 possessed the broadest absorption band ranging from 300 to 760 nm, the lowest bandgap (1.63 eV), and enough low HOMO energy level (?5.27 eV) because of the strong intrachain charge transfer from D to A units and the appropriate extent of quinoid state in the main chain of P2 , which was convinced by the theoretical simulation of molecular geometry and front orbits. Photovoltaic study of solar cells based on the blends of P1 – P3 and [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester (PCBM) demonstrated that P2 :PCBM exhibited the best performance: a power conversion efficiency of 1.22% with a high open‐circuit voltage (V_OC) of 0.70 V and a large short‐circuit current (I_SC) of 5.02 mA/cm² were achieved. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis and characterization of highly conjugated side‐group‐substituted benzo[1,2‐b:4,5‐b′]dithiophene‐based copolymer for use in organic solar cells

A new donor–acceptor (D–A) conjugated copolymer based on benzo[1,2‐b:4,5‐b′]dithiophene (BDT) and thieno[3,4‐c]pyrrole‐4,6‐dione (TPD) was synthesized via a Stille cross‐coupling reaction. A highly conjugated thiophene‐based side group, tris(thienylenevinylene) (TTV), was incorporated into each BDT unit to generate the two‐dimensional D–A copolymer (PBDT‐TTV). An alkoxy‐substituted BDT‐based TPD copolymer (PBDT‐OR) was synthesized using the same polymerization method for comparison. PBDT‐TTV thin films produced two distinct absorption peaks. The shorter wavelength absorption (458 nm) was attributed to the BDT units containing the TTV group, and the longer wavelength band (567–616 nm) was attributed to intramolecular charge transfer between the BDT donor and the TPD acceptor. The highest occupied molecular orbital energy levels of PBDT‐OR and PBDT‐TTV were calculated to be −5.53 and −5.61 eV, respectively. PBDT‐TTV thin films harvested a broad solar spectrum covering the range 300–700 nm. A comparison with the PBDT‐OR films revealed stronger interchain π–π interactions in the PBDT‐TTV films and, thus, a higher hole mobility. A polymer solar cell device prepared using PBDT‐TTV as the active layer was found to exhibit a higher power conversion efficiency than a device prepared using PBDT‐OR under AM 1.5 G (100 mW/cm²) conditions. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 653–660