Photocatalytic degradation of dyes and organic contaminants in water using nanocrystalline anatase and rutile TiO2

Nanocrystalline TiO₂ was synthesized by controlled hydrolysis of titanium tetraisopropoxide. The anatase phase was converted to rutile phase by thermal treatment at 1023 K for 11 h. The catalysts were characterized by X-ray diffraction (XRD), diffuse reflectance spectroscopy (DRS), Fourier-transform infrared absorption spectrophotometry (FT-IR) and N₂ adsorption (BET) at 77 K. This study compare the photocatalytic activity of the anatase and rutile phases of nanocrystalline TiO₂ for the degradation of acetophenone, nitrobenzene, methylene blue and malachite green present in aqueous solutions. The initial rate of degradation was calculated to compare the photocatalytic activity of anatase and rutile nanocrystalline TiO₂ for the degradation of different substances under ultraviolet light irradiation. The higher photocatalytic activity was obtained in anatase phase TiO₂ for the degradation of all substances as compared with rutile phase. It is concluded that the higher photocatalytic activity in anatase TiO₂ is due to parameters like band-gap, number of hydroxyl groups, surface area and porosity of the catalyst.     

Controllable synthesis and photocatalytic activities of water-soluble TiO2 nanoparticles

Water-soluble anatase, mixed-phase (anatase and rutile) and rutile TiO₂ nanoparticles (NPs) or nanorods were synthesized under mild solution conditions using polyethylene glycol 400 (PEG 400) as a stabilizer and HCl as a phase controlling reagent. The photocatalytic properties of these NPs with different crystal phases were evaluated by photocatalytic degradation experiments of methyl orange (MO). As-prepared pure anatase TiO₂ NPs show a higher photocatalytic activity than other samples and commercial P25, which may be related to the high crystallinity, the pure anatase phase, small size and the enhanced absorbability associated with the existence of PEG 400 on the NP surface.     

Solar photocatalytic degradation of methyl orange dye using TiO2 nanoparticles synthesised by sol–gel method in neutral medium

Anatase TiO₂ nanoparticles were synthesised by the sol–gel method in neutral medium, and its photocatalytic activity in the degradation of methyl orange dye under sunlight has been studied. The nanoparticles were characterised using high-resolution X-ray diffraction, high-resolution transmission electron microscopy, micro Raman analysis and diffuse reflectance spectroscopy. The blueshift and asymmetrical broadening associated with phonon confinement effect has been observed in the Raman spectra of pristine nanoparticles. The high temperature annealing of as prepared anatase samples resulted in the phase transformation in to rutile. The mixture of anatase and rutile TiO₂ nanoparticles exhibited faster photocatalytic activity in the degradation of methyl orange than the pristine anatase and rutile phases. The significant enhancement in the photocatalytic activity of mixed TiO₂ nanoparticles is due to the synergistic effects that consist of the antenna effect by the rutile phase and the activation effect by the anatase phase. Since method of preparation of the catalyst is comparatively simple and cost effective, and the energy source used is sunlight, the method can be easily implemented in waste water treatments.     

Synthesis of highly-active single-crystalline TiO2 nanorods and its application in environmental photocatalysis

Highly-active anatase TiO₂ nanorods have been successfully synthesized via a simple two-step method, hydrothermal treatment of anatase/rutile titanium dioxide nanoparticle powder in a composite-hydroxide eutectic system of 1:1 M KOH/NaOH, followed by acid post-treatment. The morphology and crystalline structure of the obtained nanorods were characterized using XRD, TEM, SEM/EDX and BET surface area analyzer. The obtained TiO₂ nanorods have a good crystallinity and a size distribution (about 4-16 nm); with the dimensions of 200-300 nm length and of 30-50 nm diameter. Compared with its precursor anatase/rutile TiO₂ nanoparticles and the titanate nanotubes, the pure anatase TiO₂ nanorods have a large specific surface area with a mesoporous structure. The photocatalytic performance of the prepared nanorods was tested in the degradation of the commercial Cibacrown Red (FN-R) textile dye, under UV irradiation. Single-crystalline anatase TiO₂ nanorods are more efficient for the dye removal.     

Microstructures and Photocatalytic Properties of S Doped Nanocrystalline TiO2 Films

The nanocrystalline S doped titanium dioxide films were successfully prepared by the improved sol-gel process. Here TiO(C₄H₉O)₄ and CS(NH₂)₂ were used as precursors of titania and sulfur, respectively. The as-prepared specimens were characterized using x-ray diffraction (XRD), x-ray energy dispersive spectroscopy (EDS), high-resolution field emission scanning electron microscopy (FE-SEM), Brunauer-Emmett-Teller (BET) surface area, and ultraviolet-visible diffuse reflectance spectroscopy. The photocatalytic activities of the films were evaluated by degradation of organic dyes in aqueous solution. The results of XRD, FE-SEM, and BET analyses indicated that the TiO₂ films were composed of nanoparticles. S doping could obviously not only suppress the formation of brookite phase but also inhibit the transformation of anatase to rutile at high temperature. Compared with pure TiO₂ film, S doped TiO₂ film exhibited excellent photocatalytic activity. It is believed that the surface microstructure of the modified films is responsible for improving the photocatalytic activity.     

Synthesis and photocatalytic activity of nanocrystalline TiO2-SrO composite powders under visible light irradiation

Nano-sized homogeneously distributed TiO₂-20, -40, -60 wt.% SrO composite powders were successfully synthesized by a sol-gel method. The as-received amorphous TiO₂—20 wt.% SrO composite powders were crystallized with anatase TiO₂ at around 750 °C. As calcination temperatures increased, the anatase TiO₂ crystalline phase was transformed to rutile TiO₂ at about 900 °C, whereas nano-sized, squarish SrTiO₃ phase was detected. The peaks obtained after calcining at 1050 °C mainly exhibited the rutile TiO₂ and SrTiO₃ phases. However, a small number of SrO₂ peaks were also detected. For the comparison of photocatalytic activity depending on light sources, TiO₂-SrO composite powders were tested in phenol degradation. TiO₂-60 wt.% SrO composite powder showed good visible light photoactivity for the photo-oxidation of phenol.     

Heat treatment of nanometer anatase powder and its photocatalytic activity for degradation of acid red B dye under visible light irradiation

The phase transformation of nanometer TiO₂ powder from anatase to rutile was realized by heat treatment, and a new nanometer TiO₂ photocatalyst that could be excited by visible light was obtained. The heat-treated TiO₂ powder at different transition stage was characterized by powder x-ray diffraction, transmission electron microscopy, and Fourier transform infrared spectroscopy. The test of photocatalytic activity of the heat-treated TiO₂ powder was carried out by the photocatalytic degradation of acid red B dye in aqueous solution under visible light irradiation. The nanometer anatase TiO₂ heat-treated at 500°C for 30 min exhibited much higher activity than those of pure anatase and mechanically mixed (anatase and rutile) TiO₂. The remarkable improvement of photocatalytic activity was mainly illustrated by the special interphase between rutile and anatase, which not only restrains the recombination of photogenerated electron-hole pairs but also reduces the adsorbability of nanometer anatase TiO₂ powder to a certain extent. More significantly, the anticipatory interlaced energy level of heat-treated TiO₂ particles is convenient for capturing photons of low energy and thus achieves the intention of using visible light. The text was submitted by the authors in English.     

TiO2 nanorod films grown on Si wafers by a nanodot-assisted hydrothermal growth

We report the controlled hydrothermal growth of rutile TiO₂ nanorods on Si wafers by using an anatase TiO₂ nanodot film as an assisted growth layer. The anatase nanodot film was prepared on the wafer by phase-separation-induced self-assembly and subsequent heat-treatment at 500 °C. The nanodots on the wafer were then subjected to hydrothermal treatment to induce the growth of rutile TiO₂ nanorod films. The size and dispersion density of the resulting TiO₂ nanorods could be varied by adjusting the Ti ion concentration in the growth solution. The TiO₂ nanorods were of the rutile phase and grew in the [001] direction. The growth mechanism reveals that the growth of the rutile nanorods was wholly dependent on the existence of rutile TiO₂ seeds, which could be formed by the dissolution-reprecipitation of the anatase nanodots during hydrothermal treatment or under the high-temperature conditions of the subsequent heat-treatment of the as-prepared nanodots. In controlling the rutile nanorod growth, the anatase nanodots show more efficiency than a dense anatase film. Preliminary evaluations of the rutile nanorod films have demonstrated that the wettability changed from highly hydrophobic to superhydrophilic and that the photocatalytic activity was enhanced with increasing nanorod dispersion density.     

The effect of the H2 flow rate on the structure and optical properties of TiO2 films deposited by inductively coupled plasma assisted chemical vapor deposition

The optical and photocatalytic properties of TiO₂ are closely related to crystalline structures, such as rutile and anatase. In this paper, TiO₂ films were produced by inductively coupled plasma (ICP) assisted chemical vapor deposition (CVD) without extra heating of the substrate, and the effect of H₂ addition on the structure and optical properties of the films was investigated. After increasing the partial pressure of H₂, the structure of the TiO₂ films changed from anatase to rutile, which usually appears at high temperatures (> 600 °C). The light transmittance decreased with increasing the H₂ flow rate due to the increased surface roughness. The photocatalytic activity of the anatase TiO₂ film was better than that of the rutile TiO₂ film.     

Study on crystallinity and morphology controlling of titania using acrylamide gel method and their photocatalytic properties

In this study, polyacrylamide gel method was used for preparation of pure and mixed phase TiO₂ nanoparticles. The influence of synthesis conditions on the physicochemical properties of products was investigated. It was found that the type of acid, which was used for acidifying the precursor solution together with calcination temperature can affect the phase structure, crystalline size, morphology and thereby photocatalytic activity of obtained TiO₂ nanoparticles. Different trends were observed during the phase transformation, particle growth, shift in energy of band gap with the change in tensile strain to compressive strain of the prepared TiO₂ nanomaterial. X-ray diffraction (XRD) showed that prepared nanocrystals, which were calcined at 450 °C have pure anatase and anatase–rutile mixed structures. The prepared samples having crystallite size between 5 nm and 60 nm were observed at different calcination temperatures. In addition, the photocatalytic activities of the prepared samples were evaluated by monitoring the degradation of Cresol Red (CR). The results show that the photocatalyst (TEC_I), exhibits the highest photocatalytic efficiency where 94.7% of CR can be decomposed after UV exposure for 75 min.     

Synthesis of Mixed-Phase TiO2 Powders in Salt Matrix and Their Photocatalytic Activity

Three mixed-phase TiO₂ powders, containing ～80 volume % anatase and ～20 volume % rutile, were prepared from amorphous titanium hydroxide and three different salt matrices—pure sodium chloride, pure Na₂CO₃, and pure disodium hydrogen phosphate (DSP). Amorphous titanium hydroxide and salt mixtures were heat treated at 875°C in a rapid thermal annealing system for different times, according to the time–temperature phase transformation graphs. Time-dependent UV degradation of aqueous solutions of methylene blue dye (15 ppm) in the presence of mixed-phase powders was used to monitor the activity of the catalysts. Microstructural study of the powders by scanning electron microscope and transmission electron microscope combined with phase analysis by XRD and optical absorbance by UV-absorption spectroscopy indicated that the higher photocatalytic activity of the powder obtained from pure DSP salt could be explained by its smaller rutile particle size and anatase–rutile interparticle bonding.     

Kinetic analysis on photocatalytic degradation of gaseous acetaldehyde,ammonia and hydrogen sulfide on nanosized porous TiO2 films

The characteristics of the UV illumination-assisted degradation of gaseous acetaldehyde, hydrogen sulfide, and ammonia on highly active nanostructured-anatase and rutile films were investigated. It was found that the anatase film showed a higher photocatalytic activity than the counterpart did, however, the magnitude of difference in the photocatalytic activity of both films decreased in the order ammonia > acetaldehyde > hydrogen sulfide. To elucidate the reasons for the observation, the adsorption characteristics and the kinetics of photocatalytic degradation of the three reactants on both films were analyzed. The adsorption analysis examined using a simple Langmuir isotherm, showed that adsorbability on both films decreased in the order ammonia > acetaldehyde > hydrogen sulfide, which can be explained in terms of the decreasing electron-donor capacity. Acetaldehyde and ammonia adsorbed more strongly and with higher coverage on anatase film (1.2 and 5.6 molecules/nm², respectively) than on rutile (0.6 and 4.7 molecules/nm², respectively). Conversely, hydrogen sulfide molecules adsorbed more strongly on rutile film (0.7 molecules/nm²) than on anatase (0.4 molecules/nm²). Exposure to UV light illumination brought about the photocatalytic oxidation of the three gases in contact with both TiO₂ films, and the decrease in concentration were measured, and their kinetics are analyzed in terms of the Langmuir–Hinshelwood kinetic model. From the kinetic analysis, it was found that the anatase film showed the photocatalytic activities that were factors of ～8 and ～5 higher than the rutile film for the degradation of gaseous ammonia and acetaldehyde, respectively. However, the activity was only a factor of ～1.5 higher for the photodegradation of hydrogen sulfide. These observations are systematically explained by the charge separation efficiency and the adsorption characteristics of each catalyst as well as by the physical and electrochemical properties of each reactant.     

Preparation and photocatalytic activity of TiO2 powders from titanium citrate complex using two-step hydrothermal treatments

White, almost carbon-free TiO₂ powders were prepared from a titanium citrate complex ((NH₄)₄[Ti₂(C₆H₄O₇)₂(O₂)₂]·4H₂O) using a two-step hydrothermal treatment. The product yield, carbon contamination, and crystalline phase of TiO₂ depended on both the temperature and pH value for each treatment. Titanium was precipitated as a solid phase (H₂Ti₂O₅·H₂O) using the first hydrothermal treatment in the basic condition (pH = 12) at temperatures less than 150 °C. Then white rutile or anatase powder was crystallized using the second hydrothermal treatment at 200 °C. By changing the pH condition of the second hydrothermal treatment, rutile and anatase were synthesized selectively. The photocatalytic decomposition activity of obtained rutile powder for gaseous 2-propanol under visible light was increased by Cu-grafting.     

Synthesis and photocatalytic oxidation properties of titania hollow spheres

The hollow spheres of anatase TiO₂ with higher photocatalytic activity have been fabricated by spherical CaCO₃ nanoparticles as a template, and titanium sulfate (Ti(SO₄)₂) as a precursor, and the CaCO₃ templates were dissolved subsequently in dilute HNO₃ solution. The TiO₂ hollow spheres samples were characterized by X-ray diffraction (XRD), transmission electron microscopy (TEM), and N₂ adsorption-desorption isotherms. The characterization results indicate that as prepared TiO₂ hollow spheres sample was transformed to anatase phase in calcined at 400 °C, and the anatase TiO₂ hollow spheres have a higher specific surface area and show much better photocatalytic activity than commercial P25 in the photodegradation of Rhodamine B under the UV irradiation.     

Solar photocatalytic degradation of rhodamine B by heat-treated nanometer anatase TiO<Subscript>2</Subscript> powder

The partial phase transformation of nanometer TiO₂ powder from anatase to rutile was realized by heat-treatment, and then a novel photocatalyst which could utilize solarlight was obtained. The heat-treated nanometer TiO₂ powders at different transition stage were characterized by XRD, TEM and UV-vis spectra. In addition, the photocatalytic activity of heat-treated nanometer TiO₂ powder was tested out through the degradation of Rhodamine B dye in aqueous solution under solarlight irradiation. The results reveal that the nanometer anatase TiO₂ powder heat-treated at 500°C for 80 min exhibites the highest photocatalytic activity. That is, Rhodamine B dye can effectively degraded under solarlight irradiation in the presence of heat-treated nanometer TiO₂ powder.     

Detection of reactive oxygen species (ROS) generated by TiO2(R), TiO2(R/A) and TiO2(A) under ultrasonic and solar light irradiation and application in degradation of organic dyes

In the present work, the rutile, anatase and mixed (rutile and anatase) crystal phase TiO₂ powders were irradiated by ultrasound and solar light, respectively, and the generation of reactive oxygen species (ROS) were detected through the oxidation reaction from 1,5-diphenyl carbazide (DPCI) to 1,5-diphenyl carbazone (DPCO). The DPCO can be extracted by the mixed solvent of benzene and carbon tetrachloride and the extract liquors display an obvious absorption peak around 563 nm. In addition, the influences of (ultrasonic or solar light) irradiation time, TiO₂ addition amount and DPCI concentration on the quantities of generated ROS were also reviewed. The kinds of generated ROS were determined by using several radical scavengers. At last, the researches on the sonocatalytic and photocatalytic degradation of several organic dyes were also performed. It is wished that this paper might offer some important subjects for broadening the applications of sonocatalytic and photocatalytic technologies.     

Preparation and characterization of Co-doped TiO2 materials for solar light induced current and photocatalytic applications

Different amounts of Co-doped TiO₂ powders and thin films were prepared by following a conventional co-precipitation and sol–gel dip coating technique, respectively. The synthesized powders and thin films were subjected to thermal treatments from 400 to 800 °C and were thoroughly investigated by means of X-ray diffraction, X-ray photoelectron spectroscopy, energy dispersive analysis with X-rays, FT-infrared, FT-Raman, diffuse reflectance spectroscopy, ultraviolet–visible spectroscopy, BET surface area, zeta potential, flat band potential measurements, band-gap energy, etc. The photocatalytic ability of the powders was evaluated by methylene blue (MB) degradation studies. The thin films were characterized by photocurrent and ultraviolet–visible (UV–Vis) spectroscopy techniques. The characterization results suggest that the Co-doped TiO₂ powders synthesized in this study consist mainly anatase phase, and possess reasonably high specific surface area, low band gap energy and flat band potentials amenable to water oxidation in photoelectrochemical (PEC) cells. The photocatalytic degradation of MB over Co-doped TiO₂ powders followed the Langmuir–Hinshelwood first order reaction rate relationship. The 0.1 wt.% Co-doped TiO₂ composition provided the higher photocurrent, n-type semi-conducting behavior and higher photocatalytic activity among various Co-doped TiO₂ compositions and pure TiO₂ investigated.     

Preparation and photocatalytic activity of anatase TiO2 nanocrystallites with high thermal stability

Anatase TiO₂ nanocrystallites were prepared from TiCl₄ with addition of aqueous ammonia by changing Ti(OH)₄ hydrogel into its corresponding alcogel followed by supercritical drying in ethanol medium. The as-prepared TiO₂ was characterized by XRD, TG and BET. The results show that the prepared anatase TiO₂ has remarkable high thermal stability. The anatase structure of the prepared TiO₂ is maintained even after calcination up to temperatures as high as 800 °C. The photocatalytic activity of the prepared TiO₂ calcined at 800 °C in degradation of reactive brilliant red X-3B is comparable to commercially available nanosized P25 TiO₂.     

Photocatalytic properties of porous TiO2/Ag thin films

In this study, nanocrystalline TiO₂/Ag composite thin films were prepared by a sol-gel spin-coating technique. By introducing polystyrene (PS) spheres into the precursor solution, porous TiO₂/Ag thin films were prepared after calcination at a temperature of 500 °C for 4 h. Three different sizes (50, 200, and 400 nm) of PS spheres were used to prepare porous TiO₂ films. The as-prepared TiO₂ and TiO₂/Ag thin films were characterized by X-ray diffractometry (XRD) and by scanning electron microscopy to reveal structural and morphological differences. In addition, the photocatalytic properties of these films were investigated by degrading methylene blue under UV irradiation.When PS spheres of different sizes were introduced after calcination, the as-prepared TiO₂ films exhibited different porous structures. XRD results showed that all TiO₂/Ag films exhibited a major anatase phase. The photodegradation of porous TiO₂ thin films prepared with 200 nm PS spheres and doped with 1 mol% Ag exhibited the best photocatalytic efficiency where ∼ 100% methylene blue was decomposed within 8 h under UV exposure.     

In-situ preparation of TiO2/SnO2 nanocrystalline sol for photocatalysis

A novel preparation method to synthesize TiO₂/SnO₂ nanocrystalline sol under mild conditions was presented. Ti(OC₄H₉)₄ used as a precursor was hydrolyzed in the rutile SnO₂ nanocrystalline sol, and in-situ formed TiO₂/SnO₂ nanocrystalline sol. The crystal structure, morphology and photocatalysis performance of samples were investigated. The results show that the additional rutile SnO₂ nano grains serve as heterogeneous crystal nucleus and exhibite the inducing effect on TiO₂ grains growth, thus leading to the changes in crystalline phase and particle morphology. In addition, the photoluminescence (PL) spectra analysis indicates that TiO₂/SnO₂ composite structure induces a better charge separation, and thus the photocatalytic activity of TiO₂/SnO₂ sol is increased significantly compared with TiO₂ sol.