Extraction of toluene from aliphatic compounds using an ionic liquid as solvent: Influence of the alkane on the (liquid + liquid) equilibrium

In this paper, the feasibility of using 1-ethyl-3-methylimidazolium ethylsulfate ionic liquid, [EMim][ESO₄], as solvent for the extraction of toluene from aliphatic compounds (hexane, heptane, octane, or nonane) was analyzed. (Liquid + liquid) equilibrium (LLE) data for the ternary systems {alkane (1) + toluene (2) + [EMim][ESO₄] (3)} were measured at T = 298.15 K and atmospheric pressure. Selectivity and solute distribution ratio were calculated from the experimental LLE data, and the obtained values were compared to those previously reported using other ionic liquids and sulfolane. The degree of consistency of the experimental LLE data was ascertained using the Othmer–Tobias equation. Finally, the experimental LLE data were satisfactorily correlated with NRTL and UNIQUAC models.     

Separation of aromatic hydrocarbons from alkanes using ammonium ionic liquid C2NTf2 at T = 298.15 K

(Liquid + liquid) equilibrium data are presented for four ternary systems of an alkane, or aromatic compound and ethyl(2-hydroxyethyl)dimethylammonium bis{(trifluomethyl)sulfonyl}imide (C₂NTf₂) at 298.15 K: [hexane + benzene + C₂NTf₂], [hexane + p-xylene + C₂NTf₂], and [hexane, or octane + m-xylene + C₂NTf₂]. The separation of aromatic hydrocarbons (benzene, or p-xylene, or m-xylene) from aliphatic hydrocarbons (hexane, or octane) is investigated by extraction with the ammonium ionic liquid. Selectivities and distribution ratios are discussed for these mixtures at constant temperature. The data were analysed and compared to those previously reported for other ionic liquids and especially for the system {hexane + benzene + [EMIM][NTf₂]}. The nonrandom two liquid NRTL model was successfully used to correlate the experimental tie-lines and to calculate the phase compositions of the ternary systems.     

Separation of toluene from alkanes using 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid at T = 298.15 K and atmospheric pressure

In this paper, the separation of toluene from aliphatic hydrocarbons (heptane, or octane, or nonane) was analyzed by solvent extraction with 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid, [EMpy][ESO₄]. Liquid?liquid equilibrium (LLE) data for the ternary systems {heptane (1) + toluene (2) + [EMpy][ESO₄] (3)}, {octane (1) + toluene (2) + [EMpy][ESO₄] (3)}, and {nonane (1) + toluene (2) + [EMpy][ESO₄] (3)} were obtained by measurements at T = 298.15 K and atmospheric pressure. The selectivity, % removal of aromatic, and solute distribution ratio, obtained from experimental equilibrium results, were used to determine the ability of [EMpy][ESO₄] as a solvent. The degree of consistency of the experimental LLE values was ascertained using the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were correlated with the NRTL model. Finally, the results obtained were compared with other ionic liquids and other solvents.     

Quaternary (liquid + liquid) equilibrium data for the extraction of toluene from alkanes using the ionic liquid [EMim][MSO4]

(Liquid + liquid) equilibrium (LLE) studies for the extraction of aromatics from alkanes present in the petroleum fractions are important to develop theoretical/semiempirical (liquid + liquid) equilibrium models, which are used in the design of extraction processes. In this work, the ionic liquid 1-ethyl-3-methylimidazolium methylsulfate, [EMim][MSO₄], was evaluated as potential solvent for the separation of toluene from heptane and cyclohexane. The LLE data for the quaternary system {heptane (1) + cyclohexane (2) + toluene (3) + [EMim][MSO₄] (4)} were experimentally determined at T = 298.15 K and atmospheric pressure. Moreover, the LLE data for the ternary systems {heptane or cyclohexane (1) + toluene (2) + [EMim][MSO₄] (3)} were also determined. Solute distribution ratios and selectivities were calculated and analysed in order to evaluate the capability of the ionic liquid to accomplish the separation target. A comparison between the solute distribution ratios and selectivities for the quaternary and the ternary systems was also made. Finally, the experimental tie-line data were correlated with the NRTL model.     

Ternary (liquid + liquid) equilibria of the azeotrope (ethyl acetate + 2-propanol) with different ionic liquids at T = 298.15 K

Experimental (liquid + liquid) equilibria involving ionic liquids {1,3-dimethylimidazolium methyl sulfate (MMIM MeSO₄)}, {2-propanol + ethyl acetate + 1-butyl-3-methylimidazolium hexafluorophosphate (BMIM PF₆)} and {2-propanol + ethyl acetate + 1-hexyl-3-methylimidazolium hexafluorophosphate (HMIM PF₆)} were carried out to separate the azeotropic mixture ethyl acetate and 2-propanol. Selectivity and distribution ratio values, derived from the tie-lines data, were presented in order to analyze the best separation solvent in a liquid extraction process. Experimental (liquid + liquid) equilibria data were compared with the correlated values obtained by means of the NRTL, Othmer-Tobias and Hand equations. These equations were verified to accurately correlate the experimental data.     

Liquid + liquid equilibria for the quaternary systems of (water + acetic acid + mixed solvent) at 298.2 K and atmospheric pressure

Liquid–liquid equilibrium (LLE) data for the quaternary systems of [water + acetic acid + mixed solvent (dipropyl ether + diisopropyl ether)] were measured at 298.2 K and atmospheric pressure, using various compositions of mixed solvent. Binodal curves and tie-lines for the quaternary systems have been determined in order to investigate the effect of solvent mixture, dipropyl ether (DPE) and diisopropyl ether (IPE), on extracting acetic acid from aqueous solution. A comparison of the extracting capabilities of the mixed solvents was made with respect to distribution coefficients, separation factors, and solvent free selectivity bases. Reliability of the data was confirmed by using the Othmer–Tobias and Hand plots. The tie-lines were also correlated using the UNIFAC model. The average root-mean-square deviations between the observed and calculated mass fractions for the studied systems were in the range of 10–14%.     

Application of [EMpy][ESO4] ionic liquid as solvent for the liquid extraction of xylenes from hexane

Liquid–liquid equilibrium (LLE) data for the ternary systems {hexane + o-xylene + 1-ethyl-3-methylpyridinium ethylsulfate}, {hexane + p-xylene + 1-ethyl-3-methylpyridinium ethylsulfate}, and {hexane + m-xylene + 1-ethyl-3-methylpyridinium ethylsulfate} were determined at T = 298.15 K and atmospheric pressure. Selectivity, percent removal of aromatic, and solute distribution ratio, derived from the experimental equilibrium data, were used to determine if this ionic liquid can be used as a potential extracting solvent for the separation of xylenes from hexane. The consistency of tie-line data was ascertained by applying the Othmer–Tobias equation. The phase diagrams for the ternary systems are shown, and the tie-lines correlated with the NRTL model have been compared with the experimental data.     

Separation of benzene from alkanes using 1-ethyl-3-methylpyridinium ethylsulfate ionic liquid at several temperatures and atmospheric pressure: Effect of the size of the aliphatic hydrocarbons

The ionic liquid 1-ethyl-3-methylpyridinium ethylsulfate, [EMpy][ESO₄], was studied for the separation of benzene from aliphatic hydrocarbons (octane or nonane) by solvent extraction through the determination of the (liquid + liquid) equilibrium (LLE) of the ternary systems: {octane (1) + benzene (2) + [EMpy][ESO₄] (3)} and {nonane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15 and 298.15) K and atmospheric pressure. Binodal curves were determined using the “cloud point” method, and tie-line compositions were obtained by density measurements. The values of selectivity and distribution coefficient, derived from the tie-line data, were used to decide if this ionic liquid can be used as potential solvent for the separation of benzene from aliphatic hydrocarbons using liquid extraction. These results were analyzed and compared to those previously reported for the systems {hexane + benzene + [EMpy][ESO₄]} and {heptane + benzene + [EMpy][ESO₄]}. The experimental results show that this ionic liquid is suitable for the extraction of benzene from mixtures containing octane and nonane. The consistency of tie-line data was ascertained by applying the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were well correlated with the NRTL model. No literature data were found for the mixtures discussed in this paper.     

(Liquid + liquid) equilibria of the (water + acetic acid + dibasic esters mixture) system

(Liquid + liquid) equilibrium (LLE) data for the {water + acetic acid + dibasic esters mixture (dimethyl adipate + dimethyl glutarate + dimethyl succinate)} system have been determined experimentally at T = (298.2, 308.2, and 318.2) K. Complete phase diagrams were obtained by determining solubility curve and tie-line data. The reliability of the experimental tie-line data was confirmed by using the Othmer-Tobias correlation. The UNIFAC model was used to predict the phase equilibrium in the system using the interaction parameters determined from experimental data between CH₂, CH₃COO, CH₃, COOH, and H₂O functional groups. Distribution coefficients and separation factors were compared with previous studies.     

Liquid–liquid equilibrium and interfacial tension of the ternary system heptane + thiophene + 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide

The liquid–liquid equilibrium (LLE) of the ternary system comprising heptane, thiophene and the ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)imide ([C₂mim][NTf₂]) was determined at 25 °C and atmospheric pressure, for preliminary evaluation of the potential of this ionic liquid as solvent for the desulfurisation of transportation fuels. Classical parameters such as solute distribution ratio and selectivity were calculated from the LLE data and subsequently analysed. The LLE data were also correlated by means of the ‘Non-Random Two-Liquid’ (NRTL) equation. Besides the LLE, another critical property for the design of extraction processes, namely the interfacial tension, was determined in parallel, throughout the immiscibility domain of the ternary system. For the first time, the LLE and the interfacial tension of a ternary system involving an ionic liquid are jointly reported.     

Liquid–liquid equilibria for ternary systems of {cyclohexane + aromatic compounds + 1-ethyl-3-methylpyridinium ethylsulfate}

Liquid–liquid equilibrium (LLE) data for the ternary systems {cyclohexane + benzene + 1-ethyl-3-methylpyridinium ethylsulfate}, {cyclohexane + toluene + 1-ethyl-3-methylpyridinium ethylsulfate}, and {cyclohexane + ethylbenzene + 1-ethyl-3-methylpyridinium ethylsulfate} were determined at T = 298.15 K and atmospheric pressure. Selectivity, percent removal of aromatic, and solute distribution ratio, derived from the equilibrium data, were used to determine if this ionic liquid can be used as a potential solvent for the separation of aromatic compounds from cyclohexane. The phase diagrams for the ternary systems are shown, and the tie-lines correlated with NRTL model have been compared with the experimental data.     

Phase equilibria of liquid (water + butyric acid + oleyl alcohol) ternary system

(Liquid + liquid) equilibrium (LLE) data for the ternary system of (water + butyric acid + oleyl alcohol) at T = (298.15, 308.15, and 318.15) K are reported. Complete phase diagrams were obtained by determining solubility and the tie-line data. The reliability of the experimental tie lines was confirmed by using Othmer-Tobias correlation. The UNIFAC method was used to predict the phase equilibrium data. The phase diagrams for the ternary mixtures including both the experimental and correlated tie lines are presented. Distribution coefficients and separation factors were evaluated for the immiscibility region. A comparison of the solvent extracting capability was made with respect to distribution coefficients, separation factors, and solvent-free selectivity bases for T = (298.15, 308.15, and 318.15) K. It is concluded that oleyl alcohol may serve as an adequate solvent to extract butyric acid from its dilute aqueous solutions.     

Liquid-liquid equilibria of water + 3-hydroxy-2-butanone + ethyl ethanoate

(Liquid-liquid) equilibrium (LLE) data of the solubility curves and tie-line compositions have been determined for mixtures of (water + 3-hydroxy-2-butanone + ethyl ethanoate) at 298.15 K, 308.15 K and 318.15 K and 101.3 kPa. Distribution coefficients and separation factors have been evaluated for the immiscibility region. The reliability of the experimental tie-lines has been confirmed by using Othmer-Tobias correlation. The LLE data of the ternary systems have been predicted by UNIFAC method.     

(Liquid + liquid) equilibria of (water + propionic acid + alcohol) ternary systems

(Liquid + liquid) equilibrium (LLE) data of the solubility (binodal) curves and tie-line end composition were examined for mixtures of {water (1) + propionic acid (2) + octanol or nonanol or decanol or dodecanol (3)} at T = 298.15 K and 101.3 ± 0.7 kPa. The reliability of the experimental tie-line data was confirmed by using the Othmer-Tobias correlation. The LLE data of the ternary systems were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated for the immiscibility region.     

(Liquid + liquid) equilibria of (water + propionic acid + cyclohexanone) at several temperatures

(Liquid + liquid) equilibrium (LLE) data for (water + propionic acid + cyclohexanone) were measured under atmospheric pressure and at T = (293.2, 298.2 and 303.2) K. Phase diagrams were obtained by determining solubility and tie-line data. The LLE data of the ternary systems were predicted by UNIFAC method. Distribution coefficients and separation factors were evaluated over the immiscibility regions.     

Activity coefficients of NaCl in the NaCl + NaBF4 + H2O ternary system at 298.15 K

The activity coefficients of sodium chloride in the NaCl + NaBF₄ + H₂O ternary system were experimentally determined at 298.15 K, at ionic strengths of 0.3. 0.5, 1, 2 and 3 mol kg⁻¹ from emf from the bi-ISE cell without liquid junction:

ISE-Na|NaCl(m_A), NaBF₄(m_B)|ISE-Cl

Measurement and correlation of liquid–liquid equilibria for ternary systems {cyclooctane + aromatic hydrocarbon + 1-ethyl-3-methylpyridinium ethylsulfate} at T = 298.15 K and atmospheric pressure

This work reports liquid–liquid equilibrium (LLE) results for the ternary systems {cyclooctane + benzene + 1-ethyl-3-methylpyridinium ethylsulfate}, {cyclooctane + toluene + 1-ethyl-3-methylpyridinium ethylsulfate}, and {cyclooctane + ethylbenzene + 1-ethyl-3-methylpyridinium ethylsulfate} at T = 298.15 K and under atmospheric pressure. The selectivity, percent removal of aromatic, and distribution coefficient ratio, derived from the tie-line data, were calculated to determine if this ionic liquid is a good solvent for the extraction of aromatics from cyclooctane. The phase diagrams for the ternary systems are shown, and the tie-lines correlated with the NRTL model have been compared with the experimental data. The consistency of the experimental LLE data was ascertained using the Othmer–Tobias and Hand equations. No data for mixtures presented here have been found in the literature.     

Liquid-liquid equilibria of (water + butyric acid + diethyl succinate or diethyl glutarate or diethyl adipate) ternary systems

Liquid-liquid equilibrium (LLE) data of the solubility (binodal) curves and tie-line end compositions were examined for mixtures of {(water (1) + butyric acid (2) + diethyl succinate or diethyl glutarate or diethyl adipate (3)} at 298.2 K and 101.3 ± 0.7 kPa. The relative mutual solubility of butyric acid is higher in the diethyl succinate or diethyl glutarate or diethyl adipate layers than water layers. The consistency of the experimental tie-lines was determined through the Othmer-Tobias correlation equation. The LLE data were correlated with NRTL model, indicating the reliability of the NRTL equations for these ternary systems. The best results were achieved with the NRTL equation, using non-randomness parameter (α = 0.3) for the correlation. Distribution coefficients and separation factors were measured to evaluate the extracting capability of the solvents.     

(Liquid + liquid) equilibria for ternary mixtures of (alkane + benzene + [EMpy] [ESO4]) at several temperatures and atmospheric pressure

In this work, the separation of benzene from aliphatic hydrocarbons (hexane, or heptane) is investigated by extraction with 1-ethyl-3-methylpyridinium ethylsulphate ionic liquid, [EMpy][ESO₄]. (Liquid + liquid) equilibria (LLE) data are determined for the ternary systems: {hexane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15, 293.15, 298.15, and 303.15) K and {heptane (1) + benzene (2) + [EMpy][ESO₄] (3)} at T = (283.15 and 298.15) K and atmospheric pressure. The selectivity and distribution coefficient, derived from the tie line data, were used to determine whether the ionic liquid is a good solvent for the extraction of aromatic from aliphatic compounds. The consistency of the tie line data was ascertained by applying the Othmer–Tobias and Hand equations. The experimental results for the ternary systems were well correlated with the NRTL equation. A study of the temperature effect and the influence of the chain length of the alkanes were realized. The results obtained were compared with other ionic liquids. There are no literature data for the mixtures discussed in this paper.     

Phase equilibria in ternary aqueous mixtures of 1,3-butanediol with 2-ethyl-1-hexanol at T = (298.2, 303.2 and 308.2) K

Experimental tie-line data for ternary system of (water + 1,3-butanediol (1,3-BD) + 2-ethyl-1-hexanol (2EH)) were determined at T = (298.2, 303.2 and 308.2) K under atmospheric conditions. This ternary system exhibits type-1 behavior of LLE. The experimental ternary LLE data were correlated using the NRTL model, and the binary interaction parameters were obtained. The average root-mean-square deviation between the observed and calculated mole fractions was 1.38%. Distribution coefficient and separation factor were measured to evaluate the extracting capability of the solvent. The separation factor values for the solvent used in this work were then compared with literature values obtained in our previous works for other butanediols.