Photopolymerization of acrylate derivatives initiated by hexaarylbiimidazole with ether groups

A novel hexaarylbiimidazole derivative 2,2′‐bis‐(2‐chlorophenyl)‐4,4′,5,5′‐tetra‐[3‐(2‐hydroxyl‐3‐ethylene glycol monoethylene ether‐propane‐1‐oxy)‐phenyl]‐1,2′‐biimidazole (BCTE‐HABI) was synthesized from 3,3′‐dihydroxyl benzil. Ultraviolet spectra, fluorescence spectra, ESR measurements, photo‐dilatometer experiments and photo‐DSC measurements indicated its good UV‐visible absorption ability, high photolysis efficiency and efficient photo‐initiation for acrylates. Copyright © 2006 Society of Chemical Industry     

新型光致变色材料的合成研究

以联苯甲酰、邻氯苯甲醛为原料 ,经过环合、氧化合成了光致变色化合物 2 ,2′ 二邻氯苯基 4 ,4′ ,5 ,5′ 四苯基 1,2′ 二咪唑。讨论了多种因素对氧化反应收率的影响 ,其最佳工艺条件为 :以乙二醇一乙醚为分散剂 ,单体 2 邻氯苯基 4 ,5 二苯基咪唑与氧化剂K3 [Fe(CN) 6]的物质的量比为 1∶2 ,反应温度 2 0～ 2 5℃ ,反应时间 5h ,总收率为 84 .9%。     

Resistive switching characteristics of polyimides derived from 2,2′‐aryl substituents tetracarboxylic dianhydrides

2,2′‐Position aryl‐substituted tetracarboxylic dianhydrides including 2,2′‐bis(biphenyl)‐4,4′,5,5′‐biphenyl tetracarboxylic dianhydride and 2,2′‐bis[4‐(naphthalen‐1‐yl)phenyl)]‐4,4′,5,5′‐biphenyl tetracarboxylic dianhydride were synthesized. A new series of aromatic polyimides (PIs) were synthesized via a two‐step procedure from 3,3′,4,4′‐biphenyl tetracarboxylic dianhydride and the newly synthesized tetracarboxylic dianhydrides monomers reacting with 2,2′‐bis[4′‐(3″,4″,5″‐trifluorophenyl)phenyl]‐4,4′‐biphenyl diamine. The resulting polymers exhibited excellent organosolubility and thermal properties associated with T_g at 264 °C and high initial thermal decomposition temperatures (T_5%) exceeding 500 °C in argon. Moreover, the fabricated sandwich structured memory devices of Al/PI‐a/ITO was determined to present a flash‐type memory behaviour, while Al/PI‐b/ITO and Al/PI‐c/ITO exhibited write‐once read‐many‐times memory capability with different threshold voltages. In addition, Al/polymer/ITO devices showed high stability under a constant stress or continuous read pulse voltage of ? 1.0 V. Copyright © 2011 Society of Chemical Industry     

Recent Developments in Enantioselective Metal‐Catalyzed Domino Reactions

Since the first definition of domino reactions by Tietze in 1993, an explosive number of these fascinating reactions has been developed, allowing the easily building of complex chiral molecular architectures from simple materials to be achieved in a single step. Even more interesting, the possibility to join two or more reactions in one asymmetric domino process catalyzed by chiral metal catalysts has rapidly become one challenging goal for chemists, due to economical advantages, such as avoiding costly protecting groups and time‐consuming purification procedures after each step. The explosive development of enantioselective metal‐catalyzed domino including multicomponent reactions is a consequence of the considerable impact of the advent of asymmetric transition metal catalysis. This review aims to update the last developments of enantioselective one‐, two‐ and multicomponent domino reactions mediated by chiral metal catalysts, covering the literature since the beginning of 2006. Abbreviations: Ac: acetyl; AQN: anthraquinone; Ar: aryl; bdpp: 2,4‐bis(diphenylphosphino)pentane; BINAP: 2,2′‐bis(diphenylphosphino)‐1,1′‐binaphthyl; BINEPINE: phenylbinaphthophosphepine; BINIM: binapthyldiimine; BINOL: 1,1′‐bi‐2‐naphthol; BIPHEP: 2,2′‐bis(diphenylphosphino)‐1,1′‐biphenyl; Bn: benzyl; Boc: tert‐butoxycarbonyl; Box: bisoxazoline; BOXAX: 2,2′‐bis(oxazolyl)‐1,1′‐binaphthyl; BPTV: N‐benzene‐fused phthaloyl‐valine; Bu: butyl; Bz: benzoyl; Cat: catechol; Chiraphos: 2,3‐bis(diphenylphosphine)butane; cod: cyclooctadiene; Cy: cyclohexyl; DABCO: 1,4‐diazabicyclo[2.2.2]octane; dba: (E,E)‐dibenzylideneacetone; DBU: 1,8‐diazabicyclo[5.4.0]undec‐7‐ene; DCE: dichloroethane; de: diastereomeric excess; DHQ: hydroquinine; DHQD: dihydroquinidine; DIFLUORPHOS: 5,5′‐bis(diphenylphosphino)‐2,2,2′,2′‐tetrafluoro‐4,4′‐bi‐1,3‐benzodioxole; DIPEA: diisopropylethylamine; DMF: dimethylformamide; DMSO: dimethyl sulfoxide; DOSP: N‐p‐dodecylbenzenesulfonylprolinate; DPEN: 1,2‐diphenylethylenediamine; dtb: di‐tert‐butyl; dtbm: di‐tert‐butylmethoxy; E: electrophile; ee: enantiomeric excess; Et: ethyl; FBIP: ferrocene bis‐imidazoline bis‐palladacycle; Fc: ferrocenyl; FOXAP: ferrocenyloxazolinylphosphine; Hex: hexyl; HFIP: hexafluoroisopropyl alcohol; HMPA: hexamethylphosphoramide; iPr‐DuPhos: 1,2‐bis(2,5‐diisopropylphospholano)benzene; Josiphos: 1‐[2‐(diphenylphosphino)ferrocenyl]ethyldicyclohexylphosphine ethanol adduct; L: ligand; MCPBA: 3‐chloroperoxybenzoic acid; Me: methyl; Me‐DuPhos: 1,2‐bis(2,5‐dimethylphospholano)benzene; MEDAM: bis(dimethylanisyl)methyl; MOM: methoxymethyl; Naph: naphthyl; NMI: N‐methylimidazole; MWI: microwave irradiation; Norphos: 2,3‐bis(diphenylphosphino)‐bicyclo[2.2.1]hept‐5‐ene; Ns: nosyl (4‐nitrobenzene sulfonyl); Nu: nucleophile; Oct: octyl; Pent: pentyl; Ph: phenyl; PHAL: 1,4‐phthalazinediyl; Pin: pinacolato; PINAP: 4‐[2‐(diphenylphosphino)‐1‐naphthalenyl]‐N‐[1‐phenylethyl]‐1‐phthalazinamine; Pr: propyl; Py: pyridyl; PYBOX: 2,6‐bis(2‐oxazolyl)pyridine; QUINAP: 1‐(2‐diphenylphosphino‐1‐naphthyl)isoquinoline; QUOX: quinoline‐oxazoline; Segphos: 5,5′‐bis(diphenylphosphino)‐4,4′‐bi‐1,3‐benzodioxole; Solphos: 7,7′‐bis(diphenylphosphino)‐3,3′,4,4′‐tetrahydro‐4,4′‐dimethyl‐8,8′‐bis‐2H‐1,4‐benzoxazine; SPRIX: spirobis(isoxazoline); SYNPHOS: 6,6′‐bis(diphenylphosphino)‐2,2′,3,3′‐tetrahydro‐5,5′‐bi‐1,4‐benzodioxin; Taniaphos: [2‐diphenylphosphinoferrocenyl](N,N‐dimethylamino)(2‐diphenylphosphinophenyl)methane; TBS: tert‐butyldimethylsilyl; TC: thiophene carboxylate; TCPTTL: N‐tetrachlorophthaloyl‐tert‐leucinate; TEA: triethylamine; Tf: trifluoromethanesulfonyl; TFA: trifluoroacetic acid; THF: tetrahydrofuran; TMS: trimethylsilyl; Tol: tolyl; Ts: 4‐toluenesulfonyl (tosyl); C₃‐Tunephos: 1,13‐bis(diphenylphosphino)‐7,8‐dihydro‐6H‐dibenzo[f,h][1,5]dioxonin; VAPOL: 2,2′‐diphenyl‐[3,3′‐biphenanthrene]‐4,4′‐diol     

Bishydrazinium and Diammonium Salts of 4,4′,5,5′‐Tetranitro‐2,2′‐biimidazolate (TNBI): Synthesis and Properties

The diammonium ( 1 ) and bishydrazinium ( 2 ) salts of 4,4′,5,5′‐tetranitro‐2,2′‐biimidazolate (TNBI) were synthesized and their physical properties as well as predicted explosive performance characteristics are described. These dianionic salts are easily formed in good yields by reaction of TNBI with aqueous solutions of the cationic species. TNBI is synthesized from 2,2′‐biimidazole, which is ultimately synthesized by the condensation of aqueous glyoxal with ammonium acetate. The compounds were characterized by NMR spectroscopy, vibrational (FT‐IR and Raman) spectroscopy, elemental analysis, thermal analysis (DSC, VTS and calorimetry), and small scale safety testing (impact, friction, ESD). The measured densities and heats of formation are reported. The materials show promise for use in IM explosive and propellant formulations due to the combination of their calculated performances, thermal stability and insensitivity to stimuli.     

Palladium(II) Complexes of C2‐Bridged Chiral Diphosphines: Application to Enantioselective Carbonyl‐Ene Reactions

(11bR,11′bR)‐4,4′‐(1,2‐Phenylene)bis[4,5‐dihydro‐3H‐dinaphtho[2,1‐c:1′,2′‐e]phosphepin] [abbreviated as (R)‐BINAPHANE], (3R,3′R,4S,4′S,11bS,11′bS)‐4,4′‐bis(1,1‐dimethylethyl)‐4,4′,5,5′‐tetrahydro‐3,3′‐bi‐3H‐dinaphtho[2,1‐c:1′,2′‐e]phosphepin [(S)‐BINAPINE], (1S,1′S,2R,2′R)‐1,1′‐bis(1,1‐dimethylethyl)‐2,2′‐biphospholane [(S,S,R,R)‐TANGPHOS] and (2R,2′R,5R,5′R)‐1,1′‐(1,2‐phenylene)bis[2,5‐bis(1‐methylethyl)phospholane] [(R,R)‐i‐Pr‐DUPHOS] are C₂‐bridged chiral diphosphines that form stable complexes with palladium(II) and platinum(II) containing a five‐membered chelate ring. The Pd(II)‐BINAPHANE catalyst displayed good to excellent enantioselectivities with ee values as high as 99.0% albeit in low yields for the carbonyl‐ene reaction between phenylglyoxal and alkenes. Its Pt(II) counterpart afforded improved yields while retaining satisfactory enantioselectivity. For the carbonyl‐ene reaction between ethyl trifluoropyruvate and alkenes, the Pd(II)‐BINAPHANE catalyst afforded both good yields and extremely high enantioselectivities with ees as high as 99.6%. A comparative study on the Pd(II) catalysts of the four C₂‐bridged chiral diphosphines revealed that Pd(II)‐BINAPHANE afforded the best enantioselectivity. The ee values derived from Pd(II)‐BINAPHANE are much higher than those derived from the other three Pd(II) catalysts. A comparison of the catalyst structures shows that the Pd(II)‐BINAPHANE catalyst is the only one that has two bulky (R)‐binaphthyl groups close to the reaction site. Hence it creates a deep chiral space that can efficiently control the reaction behavior in the carbonyl‐ene reactions resulting in excellent enantioselectivity.     

Combustion Properties of Amino‐Substituted Guanidinium 4,4′,5,5′‐Tetranitro‐2,2′‐biimidazolate(N4BIM) Salts

This paper describes the combustion properties of the amino‐substituted guanidinium 4,4′,5,5′‐tetranitro‐2,2′‐biimidazolate (N4BIM) series, including the bis‐mono, di and triaminoguanidinium salts. These salts are of interest as propellant ingredient additives, and in particular, the bis‐triaminoguanidinium salt of N4BIM displays excellent burn rate and combustion behavior. Our combustion studies have shown that TAGN4‐BIM displays a fast burning rate and has the lowest pressure dependence exponent yet measured for a triaminoguanidinium salt.     

Synthesis and characterization of organosoluble and transparent polyimides derived from trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride

A novel dianhydride, trans‐1,2‐bis(3,4‐dicarboxyphenoxy)cyclohexane dianhydride (1,2‐CHDPA), was prepared through aromatic nucleophilic substitution reaction of 4‐nitrophthalonitrile with trans‐cyclohexane‐1,2‐diol followed by hydrolysis and dehydration. A series of polyimides (PIs) were synthesized from one‐step polycondensation of 1,2‐CHDPA with several aromatic diamines, such as 2,2′‐bis(trifluoromethyl)biphenyl‐4,4′‐diamine (TFDB), bis(4‐amino‐2‐trifluoromethylphenyl)ether (TFODA), 4,4′‐diaminodiphenyl ether (ODA), 1,4‐bis(4‐aminophenoxy)benzene (TPEQ), 4,4′‐(1,3‐phenylenedioxy)dianiline (TPER), 2,2′‐bis[4‐(3‐aminodiphenoxy)phenyl]sulfone (m‐BAPS), and 2,2′‐bis[4‐(4‐amino‐2‐trifluoromethylphenoxy)phenyl]sulfone (6F‐BAPS). The glass transition temperatures (T_gs) of the polymers were higher than 198°C, and the 5% weight loss temperatures (T_d5%s) were in the range of 424–445°C in nitrogen and 415–430°C in air, respectively. All the PIs were endowed with high solubility in common organic solvents and could be cast into tough and flexible films, which exhibited good mechanical properties with tensile strengths of 76–105 MPa, elongations at break of 4.7–7.6%, and tensile moduli of 1.9–2.6 GPa. In particular, the PI films showed excellent optical transparency in the visible region with the cut‐off wavelengths of 369–375 nm owing to the introduction of trans‐1,2‐cyclohexane moiety into the main chain. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42317.     

Organosoluble polyimides derived from asymmetric 2‐substituted‐and 2,2′,6‐trisubstituted‐4,4′‐oxydianilines

We report a new method for the preparation of asymmetric diamines using 4,4′‐oxydianiline (4,4′‐ODA) as the starting material. By controlling the equivalents of bromination agent, N‐bromosuccinimide, we were able to attach bromide and phenyl substituents at the 2‐ or 2,2′,6‐positions of 4,4′‐ODA. Thus, four new asymmetric aromatic diamines, 2‐bromo‐4,4′‐oxydianiline (6), 2,2′,6‐tribromo‐4,4′‐oxydianiline (7), 2‐phenyl‐4,4′‐oxydianiline (8) and 2,2′,6‐triphenyl‐4,4′‐oxydianiline (9), were synthesized by this method. Their structural asymmetry was confirmed using ¹H NMR spectroscopy. Asymmetric polyimides (PI10–PI13) were prepared from these diamines and three different dianhydrides (pyromellitic dianhydride (PMDA), 3,3′,4,4′‐biphenyltetracarboxylic dianhydride and 2,2‐bis(3,4‐dicarboxyphenyl)hexafluoropropane dianhydride) in refluxing m‐cresol. The formed polyimides, except PI10a derived from 6 and PMDA, were all soluble in m‐cresol without premature precipitation during polymerization. These polyimides with inherent viscosity of 0.41–0.96 dL g^?1, measured at a concentration of 0.5 g dL^?1 in N‐methyl‐2‐pyrrolidone at 30 °C, can form tough and flexible films. Because of the structural asymmetry, they also exhibited enhanced solubility in organic solvents. Especially, polyimides PI11a and PI13a derived from 7 and 9 with rigid PMDA were soluble in various organic solvents at room temperature. The structural asymmetry of the prepared polyimides was also evidenced from ¹H NMR spectroscopy. In the ¹H NMR spectrum of PI11a, the protons of pyromellitic moiety appeared in an area ratio of 1:2:1 at three different chemical shifts, which were assigned to head‐to‐head, head‐to‐tail and tail‐to‐tail configurations, respectively. These polyimides also exhibited good thermal stability. Their glass transition temperatures ranged from 297 to 344 °C measured using thermal mechanical analysis. © 2013 Society of Chemical Industry     

2,2′,6,6′-Tetrabromo-3,3′,5,5′-tetramethyl-4,4′-biphenol (TTB)–flame retardant copolycarbonates and copolyesters

2,2′,6,6′-Tetrabromo-3,3′,5,5′-tetramethyl-4,4′-biphenol (TTB) is a new flame retardant monomer possessing a high degree of chemical and thermal stability. This brominated biphenol can be directly incorporated as a comonomer in condensation polymerizations. An example is the preparation of copolycarbonates of TTB and 2,2-(4-hydroxyphenyl)propane (BPA) via the aqueous caustic phosgenation method. The reaction of TTB with either ethylene oxide or ethylene chlorohydrin affords 4,4′-bis(2-hydroxyethoxy)-2,2′,6,6′-tetrabromo-3,3′,5,5′-tetramethylbiphenyl (TTB-Diol). This diol is melt polymerized into a series of terephthalate copolymers with 1,4 butanediol. The above copolymers possess flame retardancy, thermal stability, and good mechanical properties. These high-bromine-content copolymers are blended with nonhalogen-containing polymers to afford blends with specific degrees of flame resistance.     

Dehydration of ethanol/water mixtures by pervaporation using soluble polyimide membranes

A series of soluble polyimides derived from 3,3′,4,4′‐benzhydrol tetracarboxylic dianhydride (BHTDA) with various diamines such as 1,4‐bis(4‐aminophenoxy)‐2‐tert‐butylbenzene (BATB), 1,4‐bis(4‐aminophenoxy)‐2,5‐di‐tert‐butylbenzene (BADTB), and 2,2′‐dimethyl‐4,4′‐ bis(4‐aminophenoxy)biphenyl (DBAPB) were investigated for pervaporation separation of ethanol/water mixtures. Diamine structure effect on the pervaporation of 90 wt% aqueous ethanol solution through the BHTDA‐based polyimide membranes was studied. The separation factor ranked in the following order: BHTDA–DBAPB > BHTDA–BATB > BHTDA–BADTB. The increase in molecular volume for the substituted group in the polymer backbone increased the permeation rate. As the feed ethanol concentration increased, the permeation rate increased, while the water concentration in the permeate decreased for all polyimide membranes. The optimum pervaporation performance was obtained by the BHTDA–DBAPB membrane with a 90 wt% aqueous ethanol solution, giving a separation factor of 141, permeation rate of 255 g m^?2 h^?1 and 36 000 pervaporation separation index (PSI) value. Copyright © 2006 Society of Chemical Industry     

Meta-bromobiphenol epoxy resins: Applications in electronic packaging and printed circuit board

Novel 2,2′,6,6′-tetrabromo-3,3′,5,5′-tetramethyl-4,4′-biphenol (TBTMBP), and its epoxy derivatives, were synthesized to incorporate the stable meta-brominated phenol moiety into epoxy resin systems. In electronic encapsulation and laminate applications, epoxy systems derived from TBTMBP have exhibited superior hydrolytic and thermal stability as compared with the conventional ortho-brominated epoxy resins. These properties have resulted in an extended device life for semiconductors and a high T_g with excellent blister resistance for the printed circuit board, while meeting flame retardancy requirements as well.     

Catalytic Non‐Enzymatic Kinetic Resolution

While tremendous advances have been made in asymmetric synthesis, the resolution of racemates is still the most important industrial approach to the synthesis of chiral compounds. The use of enzymes for the kinetic resolution (KR) of racemic substrates to afford enantiopure compounds in high enantioselectivity and good yield has long been a popular strategy in synthesis. However, transition metal‐mediated and more recently organocatalyzed KRs have gained popularity within the synthetic community over the last two decades due to the progress made in the development of chiral catalysts for asymmetric reactions. Many catalytic non‐enzymatic procedures have been developed providing high enantioselectivity and yield for both products and recovered starting materials. Indeed, the non‐enzymatic KR of racemic compounds based on the use of a chiral catalyst is presently an area of great importance in asymmetric organic synthesis. The goal of this review is to provide an update on the principal developments of catalytic non‐enzymatic KR covering the literature since 2004. This review is subdivided into seven sections, according to the different types of compounds that have been resolved through catalytic non‐enzymatic KR, such as alcohols, epoxides, amines, alkenes, carbonyl derivatives, sulfur compounds and ferrocenes. Abbreviations: Ac: acetyl; acac: acetylacetone; AQN: anthraquinone; Ar: aryl; Atm: atmosphere; BINAM: 1,1′‐binaphthalenyl‐2,2′‐diamine; BINAP: 2,2′‐bis(diphenylphosphanyl)‐1,1′‐binaphthyl; BINEPINE: phenylbinaphthophosphepine; BINOL: 1,1′‐bi‐2‐naphthol; Bmim: 1‐butyl‐3‐methylimidazolium; Bn: benzyl; Boc: tert‐butoxycarbonyl; Box: bisoxazoline; BSA: bis(trimethylsilyl)acetamide; Bu: butyl; Bz: benzoyl; c: cyclo; CBS: Corey–Bakshi–Shibata; Cbz: benzyloxycarbonyl; COD: cyclooctadiene; COE: cyclooctene; Cy: cyclohexyl; Dba: (E,E)‐dibenzylideneacetone; DBU: 1,8‐diazabicyclo[5.4.0]undec‐7‐ene; DCC: N,N′‐dicyclohexylcarbodiimide; de: diastereomeric excess; DEAD: diethyl azodicarboxylate; Dec: decanyl; DHQD: dihydroquinidine; Difluorphos: 5,5′‐bis(diphenylphosphino)‐2,2,2′,2′‐tetrafluoro‐4,4′‐bi‐1,3‐benzodioxole; DIPEA: diisopropylethylamine: DKR: dynamic kinetic resolution; DMAP: 4‐dimethylaminopyridine; DMSO: dimethyl sulfoxide; DNA: deoxyribonucleic acid; DOSP: N‐(dodecylbenzenesulfonyl)prolinate; DTBM: di‐tert‐butylmethoxy; ee: enantiomeric excess; Et: ethyl; equiv.: equivalent; Fu: furyl; Hex: hexyl; HIV: human immunodeficiency virus; HMDS: hexamethyldisilazide; KR: kinetic resolution; L: ligand; LDA: lithium diisopropylamide; MAO: methylaluminoxane; Me: methyl; Ms: mesyl; MTBE: methyl tert‐butyl ether; Naph: naphthyl; nbd: norbornadiene; NBS: N‐bromosuccinimide; NIS: N‐iodosuccinimide; Pent: pentyl; Ph: phenyl; Piv: pivaloyl; PMB: p‐methoxybenzoyl; Pr: propyl Py: pyridyl; r.t.: room temperature; s: selectivity factor; Segphos: 5,5′‐bis(diphenylphosphino)‐4,4′‐bi‐1,3‐benzodioxole; (S,S′,R,R′)‐Tangphos: (1S,1S′,2R,2R′)‐1,1′‐di‐tert‐butyl‐(2,2′)‐diphospholane; TBS: tert‐butyldimethylsilyl; TBDPS: tert‐butyldiphenylsilyl; TCCA: trichloroisocyanuric acid ; TEA: triethylamine; TEMPO: tetramethylpentahydropyridine oxide; THF: tetrahydrofuran; Thio: thiophene; Tf: trifluoromethanesulfonyl; TMS: trimethylsilyl; Tol: tolyl; Ts: 4‐toluenesulfonyl (tosyl)     

Bioremediation of DDT‐contaminated soil: enhancement by seaweed addition

DDT [1,1,1‐trichloro‐2,2‐bis (p‐chlorophenyl) ethane] is a major environmental pollutant and economical methods to remove DDT from the environment are required. In this work we used seaweed (dried and ground) to enhance DDT transformation in waterlogged soils. Initial daily rates of DDT biodegradation increased in the following order relating to the percentage by weight of added seaweed to soil 0.5 > 1 > 0 > 3 > 5 > 13 (w/w). The actual percentages of DDT biodegradation occurring within 6 weeks were 80, 64, 60, 50, 40 and 34 respectively. During soil incubation DDD [1,1,1‐trichloro‐2,2‐bis (p‐chlorophenyl) ethane] was the major metabolite found with small amounts of DDE [1,1,1‐trichloro‐2,2‐bis (p‐chlorophenyl) ethane] produced. The maximum amount of 4,4′‐dichlorobenzophenone (DBP) (2.5%) produced was found in soil amended with 0.5% (w/w) seaweed, indicating that further degradation of DDD occurred. High levels of dissolved organic carbon (DOC), between 309 and 509 mg kg^?1 soil, were present in soil amended with 3–13% (w/w) seaweed immediately after seaweed addition. It is possible that the high levels of DOC in soils amended with larger amounts of seaweed significantly retarded DDT biodegradation, possibly due to binding of DDT to DOC and subsequently decreasing the bioavailability of DDT to soil microbes. Copyright © 2004 Society of Chemical Industry     

The Use of an Unusual Rearrangement Sequence for the Syntheses of 3‐(1‐Aminoalkylidene)‐3H‐thiophen‐2‐ones and two Examples of their Surprising Electrophilic‐Induced Dimerization Reactions

The reaction of 2‐amino‐3‐carbomethoxythiophene ( 1a ) and 2‐amino‐3‐carboethoxy‐4,5‐dimethylthiophene ( 1b ) with methyl‐ or ethylmagnesium chloride leads to new 3‐(1‐aminoalkylidene)‐3H‐thiophen‐2‐ones 4a—d in good yields (60—87%). Treatment of the compounds 4a and 4c with catalytic amounts of p‐TsOH in boiling CHCl₃ afforded the (±)‐4,4′‐bis‐(1‐aminoalkylidene)‐3′,4′‐4H,2′H‐[2,3′]bithiophenyl‐5,5′‐diones 9a and 9b as new interesting heterocycles in preparatively useful yields (60/mdash;65%).     

Synthesis and properties of new aromatic polyimides based on 2,2′‐dibromo‐4,4′,5,5′‐benzophenone tetracarboxylic dianhydride

New polyimides with enhanced thermal stability and high solubility were synthesized in common organic solvents from a new dianhydride, 2,2′‐dibromo‐4,4′,5,5′‐benzophenone tetracarboxylic dianhydride (DBBTDA). DBBTDA was used as monomer to synthesize polyimides by using various aromatic diamines. The polymers were characterized by IR and NMR spectroscopy and elemental analysis. These polyimides had good inherent viscosities in N‐methyl‐2‐pyrrolidinone (NMP) and also high solubility and excellent thermo‐oxidative stability, with 5 % weight loss in the range 433 to 597 °C. Copyright © 2004 Society of Chemical Industry     

Highly trans‐1,4‐specific polymerization of 1,3‐butadiene catalyzed by [2,6‐bis{(4S)‐ (−)‐isopropyl‐2‐oxazolin‐2‐yl}pyridine] chromium complex activated with modified methylaluminoxane

Chromium complexes with N,N,N‐tridentate ligands, LCrCl₃ (L = 2,6‐bis{(4S)‐(?)‐isopropyl‐2‐oxazolin‐2‐yl}pyridine ( 1 ), 2,2′:6′,2″‐terpyridine ( 2 ), and 4,4′,4″‐tri‐tert‐butyl‐2,2′:6′,2″‐terpyridine ( 3 )), were prepared. The structures of 1 and 2 were determined by X‐ray crystallography. Upon activation with modified methylaluminoxane (MMAO), 1 catalyzed the polymerization of 1,3‐butadiene, while 2 and 3 was inactive. The obtained poly(1,3‐butadiene) obtained with 1 ‐MMAO was found to have completely trans‐1,4 structure. The 1 ‐MMAO system also showed catalytic activity for the polymerization of isoprene to give polyisoprene with trans‐1,4 (68%) and cis‐1,4 (32%) structure. Copyright © 2011 Society of Chemical Industry     

Synthesis and Energetic Properties of 4,4′,5,5′‐Tetranitro‐2,2′‐biimidazolate(N4BIM) Salts

This paper describes the synthesis and characterization of several salts of 4,4′,5,5′‐tetranitro‐2,2′‐biimidazolate (N4BIM). Each of the salts were characterized chemically, thermally, morphologically, as well as with respect to destructive stimuli (impact, electrostatic discharge, friction, thermal). These salts show promise as propellant ingredient additives, and in particular, the bis‐triaminoguanidinium salt of N4BIM displays excellent burn rate and combustion behavior. Our combustion studies have shown that TAGN4BIM displays a fast burning rate and has the lowest pressure dependence exponent yet measured for a triaminoguanidinium salt.     

3,3′,5,5′-四氯-2,2′,4,4′,6,6′-六硝基草酰苯胺的合成

在碱性介质中,草酰氯与间二氯苯胺反应得到3,3′,5,5′-四氯草酰苯胺(Ⅰ),收率78%。Ⅰ在50℃于浓硫酸〔w(H2SO4)=98%〕-发烟硝酸〔w(HNO3)=98%〕中硝化2 h,得到3,3′,5,5′-四氯-2,2′,6,6′-四硝基草酰苯胺(Ⅱ),收率82%。Ⅱ在100℃于发烟硫酸〔w(SO3)=20%〕-发烟硝酸〔w(HNO3)=98%)中硝化8 h,得到目标化合物3,3′,5,5′-四氯-2,2′,4,4′,6,6′-六硝基草酰苯胺(Ⅲ),收率为94.7%。三步总收率为60.6%。通过红外光谱、核磁共振、质谱及元素分析确定了三种化合物的结构。     

Film studies of certain new aromatic–aliphatic polyamides

Two new aromatic–aliphatic polyamides containing azo linkage in the main chain based on 2,2′‐dimethyl‐4,4′‐diaminoazobenzene and adipic/2‐chloro‐5‐methyl‐1,2‐dioic acid (α‐chloro‐δ‐methyl adipic acid) were synthesized and analyzed by thermogravimetry and films were cast. Also three polymers obtained from condensation of 4,4′‐azodibenzoic acid/adipic acid and 2,2′‐bis [4‐(p‐amino phenoxy) phenyl] propane/4,4′‐diaminoazobenzene were studied in terms of mechanical and morphological properties. Film studies were carried out interms of tensile property, scanning electron microscope, dielectric, microwave, and X‐ray diffraction pattern. Thermal studies have been done using thermogravimetric analysis, differential thermal analysis, and pyrolysis‐mass spectral data. The results were correlated with structure and orientation of the molecules. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1305–1316, 2004