Corrosion inhibitory action of Commiphora caudata extract on the mild steel corrosion in 1 M H2SO4 acid medium

Corrosion inhibitory action of Commiphora caudata extract on the mild steel corrosion in 1 M H₂SO₄ acid medium is investigated by weight loss and electrochemical studies. The weight loss method shows that the inhibition efficiency increases with the increase of inhibitor concentration, time, and temperature. The polarization studies reveal that the extract acts as a mixed type inhibitor. In electrochemical impedance measurement, the semicircle curves indicated that the charge transfer process controlled the corrosion of mild steel. Thermodynamic parameter such as free energy value was negative, that indicates spontaneous adsorption of inhibitor on mild steel surface. In the presence of inhibitor decreases the activation energy value which shows the chemical adsorption. The Commiphora caudata extract is found to obey Langmuir adsorption isotherm. Scanning electron microscopy, FTIR, and Quantum chemical studies confirmed that the mild steel protect from the corrosion by adsorption of the inhibitor molecules on surface of metal.     

Synthesis and Inhibition Effect of a Novel Tri-cationic Surfactant on Carbon Steel Corrosion in 0.5 M H2SO4 Solution

A novel Tri-cationic surfactant was synthesized, purified and characterized. The critical micelle concentration value of the prepared surfactant was determined by surface tension and conductivity measurements. The surface parameters were calculated by surface tension measurements. The relationship between the surface properties and the corrosion inhibition efficiency of the prepared surfactant was discussed. The inhibition effect of the novel Tri-cationic surfactant on carbon steel corrosion in 0.5 M H₂SO₄ was studied by potentiodynamic polarization, electrochemical impedance spectroscopy and weight loss techniques. Potentiodynamic polarization studies revealed that the inhibitor acted as a mixed-type inhibitor. The high inhibition efficiency was attributed to the blocking of active sites on the steel surface through the adsorption of inhibitor molecules. Inhibitor adsorption on the carbon steel surface was in accordance with the Langmuir adsorption isotherm model. Thermodynamic adsorption and kinetic parameters were obtained from weight losses at different temperatures (20–60 °C).     

Inhibition Effects of a Synthesized Novel 4-Aminoantipyrine Derivative on the Corrosion of Mild Steel in Hydrochloric Acid Solution together with Quantum Chemical Studies

1,5-Dimethyl-4-((2-methylbenzylidene)amino)-2-phenyl-1H-pyrazol-3(2H)-one (DMPO) was synthesized to be evaluated as a corrosion inhibitor. The corrosion inhibitory effects of DMPO on mild steel in 1.0 M HCl were investigated using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization, open circuit potential (OCP) and electrochemical frequency modulation (EFM). The results showed that DMPO inhibited mild steel corrosion in acid solution and indicated that the inhibition efficiency increased with increasing inhibitor concentration. Changes in the impedance parameters suggested an adsorption of DMPO onto the mild steel surface, leading to the formation of protective films. The novel synthesized corrosion inhibitor was characterized using UV-Vis, FT-IR and NMR spectral analyses. Electronic properties such as highest occupied molecular orbital energy, lowest unoccupied molecular orbital energy (EHOMO and ELUMO, respectively) and dipole moment (μ) were calculated and discussed. The results showed that the corrosion inhibition efficiency increased with an increase in the EHOMO values but with a decrease in the ELUMO value.     

The Oil from Mentha rotundifolia as Green Inhibitor of Carbon Steel Corrosion in Hydrochloric Acid

The corrosion inhibition potentials of Mentha rotundifolia oil on carbon steel in 1 M HCl was studied at different concentrations via gravimetric, electrochemical impedance spectroscopy (EIS) and potentiodynamic polarization techniques. Polarization curves reveal that Mentha rotundifolia oil is a mixed-type inhibitor. Changes in impedance parameters (charge transfer resistance R_t, and double-layer capacitance C_dl) were indicative of adsorption of Mentha rotundifolia on the metal surface, leading to the formation of a protective film. The effect of the temperature on the corrosion behavior with addition of the optimal concentration of Mentha rotundifolia oil was studied in the temperature range 308 and 338 K. Adsorption of oil on the carbon steel surface is found to obey the Langmuir adsorption isotherm. Attempts to explain the inhibitory action were carried out using density functional theory (DFT) at B3LYP/6-31G(d,p) level. Quantum chemical parameters most relevant to its potential action as corrosion inhibitor such as E_HOMO (highest occupied molecular orbital energy), E_LUMO (lowest unoccupied molecular orbital energy), energy gap (ΔE), and Mulliken charges have been calculated and discussed. The theoretical results were found to be consistent with the experimental data.     

Adsorption and corrosion inhibition behaviour of N-(phenylcarbamothioyl)benzamide on mild steel in acidic medium

Corrosion inhibition property of N-(phenylcarbamothioyl)benzamide (PCB) on mild steel in 1.0 M HCl solution has been investigated using chemical (weight loss method) and electrochemical techniques (potentiodynamic polarization and AC impedance spectroscopy). The inhibition efficiencies obtained from all the methods are in good agreement. The thiourea derivative is found to inhibit both anodic and cathodic corrosion as evaluated by electrochemical studies. The inhibitor is adsorbed on the mild steel surface according to Langmuir adsorption isotherm. The adsorption mechanism of inhibition was supported by spectroscopic (UV-visible, FT-IR, XPS), and surface analysis (SEM-EDS) and adsorption isotherms. The thermodynamic parameter values of free energy of adsorption (ΔG_ads) reveals that inhibitor was adsorbed on the mild steel surface via both physisorption and chemisorption mechanism.     

Effect of degree of hydrolysis of polyvinyl alcohol on the corrosion inhibition of steel: theoretical and experimental studies

Two grades of polyvinyl alcohol (PVA) namely partially hydrolyzed (designated as PVA-I) and fully hydrolyzed (designated as PVA-II) were studied with the aim of determining the influence of PVA degree of hydrolysis on the corrosion inhibition effect of mild steel in HCl medium. The investigation was carried out using weight loss, electrochemical impedance spectroscopy, potentiodynamic polarization (PDP), and linear polarization resistance techniques. Results obtained indicate that the two grades of PVA inhibited the acid-induced corrosion of mild steel. Inhibition efficiency increased with increase in the PVAs concentration but decreased with increase in temperature. Results from all the techniques employed were in close agreement and revealed that corrosion inhibition effect followed the order PVA-I > PVA-II. PDP data show that both grades of PVA act as a mixed-type inhibitor. Impedance spectra show a high frequency capacitive loop related to the charge-transfer process of the metal corrosion and the double-layer behavior. Corrosion inhibition by the PVAs is assumed to occur by virtue of adsorption of PVA molecules on the mild steel surface which can be approximated by Langmuir adsorption isotherm model. Quantum-chemical calculations and molecular dynamic simulation approaches were also employed in the study and they have provided useful insights into the active centers of the two grades of PVA as well as the nature of interaction between the mild steel surface and the PVAs.     

Corrosion inhibition of mild steel in sulphuric acid using a bicyclic thiadiazolidine

The inhibitory effect of 3a,6a-diphenyltetrahydro-1H-imidazo [4,5-c] [1, 2, 5] thiadiazole-5(3H)-thione 2,2-dioxide (TTU) on the corrosion behaviour of mild steel in 0.5 M H₂SO₄, at (30 ± 0.5) °C was studied by gravimetric, potentiodynamic polarization, electrochemical impedance spectroscopy, and scanning electron microscopy measurements. The effect of inhibitor concentration on the corrosion rate, surface coverage and inhibition efficiency is investigated. Results show that TTU exerts a strong inhibiting effect on mild steel corrosion and acts as a cathodic-type inhibitor. TTU does not affect the mechanism of the cathodic reaction while the anodic reaction mechanism changes upon addition of the inhibitor. Possible mechanistic pathways for the inhibition process are proposed. The inhibition efficiency of TTU may be due to either the adsorption of inhibitor molecules building a protective film or the formation of an insoluble complex of the inhibitor with metal cations. TTU adsorption obeys the Langmuir model.     

THE ROLE OF PHOSPHONATE DERIVATIVES ON THE CORROSION INHIBITION OF STEEL IN HCL MEDIA

The inhibition of corrosion of steel by two P-containing compounds, sodium methyldodecyl phosphonate and sodium methyl (11-smethacryloyloxyundecyl) phosphonate, in hydrochloric acid has been investigated at various temperatures using electrochemical techniques (impedance spectroscopy (EIS), potentiodynamic polarization) and weight loss measurements. Inhibition efficiency (E%) increased with phosphonate concentration. Adsorption of inhibitors on the steel surface in 1 M HCl follows the Langmuir isotherm model. EIS measurements showed that the dissolution process of steel occurred under activation control. Polarization curves indicated that inhibitors tested acted as cathodic inhibitors. The temperature effect on the corrosion behavior of steel in 1 M HCl without and with the inhibitor was studied in the temperature range from 313 to 353 K. The adsorption free energy and activation parameters for the steel dissolution reaction in the presence of phosphonates were determined.     

A Corrosion Inhibition Study of a Novel Synthesized Gemini Nonionic Surfactant for Carbon Steel in 1 M HCl Solution

In this study, a gemini nonionic surfactant was synthesized as a corrosion inhibitor for carbon steel in 1 M HCl. Surface properties of the synthesized gemini nonionic surfactant were determined by using surface tension. The results showed that the gemini nonionic surfactant has good surface active properties. The corrosion inhibition effect of the synthesized inhibitor on carbon steel was evaluated by using electrochemical impedance spectroscopy (EIS), potentiodynamic polarization and weight loss methods. The characterization of the film formed on the steel surface was carried out by scanning electron microscope (SEM) methods. The inhibitor molecules were adsorbed physically onto a carbon steel surface according to the Langmuir adsorption isotherm. The results revealed that the inhibitor acted as a mixed-type inhibitor. It was found that the inhibition efficiency increases with an increase in inhibitor concentration and decreases with increasing temperature. Thermodynamic parameters were calculated to elucidate the inhibitive mechanism.     

THE EFFECT OF ENVIRONMENTALLY BENIGN FRUIT EXTRACT OF SHAHJAN (MORINGA OLEIFERA) ON THE CORROSION OF MILD STEEL IN HYDROCHLORIC ACID SOLUTION

The inhibition of the corrosion of mild steel in hydrochloric acid solution by the fruit extract of shahjan (Moringa oleifera) was studied using weight loss, electrochemical impedance spectroscopy (EIS), linear polarization, and potentiodynamic polarization techniques (Tafel). Inhibition was found to increase with increasing concentration of the extract. The effect of temperature, immersion time, and acid concentration on the corrosion behavior of mild steel in hydrochloric acid solutions with addition of extract was also studied. The inhibition occurred via adsorption of the inhibitor molecules on the mild steel surface obeying the Langmuir adsorption isotherm. Thermodynamic activation parameters such as activation energy, enthalpy (ΔH*), and entropy (ΔS*) of activation for corrosion process were calculated and discussed. The results obtained show that both chemical and physical adsorption of inhibitor molecules occur simultaneously and the fruit extract of shahjan (Moringa oleifera) could serve as an effective inhibitor of the corrosion of mild steel in hydrochloric acid media.     

CHAMOMILE (Matricaria recutita) EXTRACT AS A CORROSION INHIBITOR FOR MILD STEEL IN HYDROCHLORIC ACID SOLUTION

The corrosion inhibition of mild steel in hydrochloric acid solution by chamomile (Matricaria recutita) extract (CE) was investigated through electrochemical (polarization, EIS) and surface analysis (optical microscopy/AFM/SEM) techniques. The effects of inhibitor concentration, temperature, and pH were evaluated. Thermodynamic parameters were calculated and adsorption studies were carried out. Finally, the surface morphology was investigated. The electrochemical studies showed that CE acts as a mixed-type corrosion inhibitor with predominantly anodic behavior. CE was adsorbed physically on the metal surface and obeyed the Langmuir adsorption isotherm. It impeded the corrosion processes by changing the activation energy. In the presence of CE, the metal surface was more uniform than the surface in the absence of inhibitor. Maximum inhibition efficiency (IE) was 93.28%, which was obtained at 22°C in 7.2 g/L of inhibitor in 1 M HCl solution.     

INVESTIGATION OF ADSORPTION AND INHIBITIVE PROPERTIES OF SOME DIAMINE COMPOUNDS ON MILD STEEL CORROSION IN HYDROCHLORIC ACID SOLUTION

In this work, the adsorption and corrosion inhibition effect of two new synthesized compounds on mild steel in 6 M hydrochloric acid was studied by electrochemical impedance spectroscopy, Tafel polarization, weight loss, quantum, and atomic force microscopy methods. The obtained results show that these compounds are efficient corrosion inhibitors for mild steel in hydrochloric acid media. Electrochemical impedance spectroscopy shows that inhibition efficiency increases with increase of concentration of both inhibitors. These molecules obey the Langmuir adsorption isotherm. Some samples of mild steel were examined by atomic force microscopy. Quantum chemical calculations were further applied to reveal the adsorption structure and explain the experimental results.     

Corrosion inhibition of carbon steel by N,N′-Dimethylaminoethanol in simulated concrete pore solution contaminated with NaCl

The inhibition behavior of N,N′-Dimethylaminoethanol (DMEA) as an organic corrosion inhibitor for carbon steel in simulated concrete pore solution contaminated with chloride ions encountered in the Mediterranean seawater (0.5 mol L^?1), at different temperatures, was investigated by means of weight loss, potentiodynamic polarization and electrochemical impedance spectroscopy (EIS) techniques. The results obtained confirm that DMEA is an efficient corrosion inhibitor over the whole range of temperatures studied; it can significantly reduce the corrosion rate of carbon steel. The inhibition efficiency (IE%) increases as the DMEA concentration rises; it reaches its maximum average value of 80% at about 0.125 mol L^?1. The corrosion inhibition of carbon steel by DMEA occurs through chemisorption of inhibitor molecules on the active sites, according to the Langmuir isotherm; this leads to the formation of a passive layer on the metal surface which separates the metal from direct contact with the corrosive medium and hence keeps the interface in a passive state. Furthermore, the activation parameters of corrosion processes were determined and discussed.     

Polygonatum odaratum extract as an eco-friendly inhibitor for aluminum corrosion in acidic medium

The corrosion of aluminum specimens in Polygonatum odaratum (P. odaratum) extract was studied using weight loss measurements, potentiodynamic polarization, electrochemical impedance spectroscopy, scanning electron microscopy (SEM), and electron dispersive X-ray spectroscopy (EDX) techniques. The inhibition efficiency of the aluminum specimens in the presence of inhibitor from P. odaratum plant extract at 303–333 ± 1 K was evaluated with the weight loss technique. The results indicate the inhibition efficiency of P. odaratum plant extract increased with increased concentration of the inhibitor and decreased temperature in an acidic medium. The corrosion inhibition properties of the P. odaratum plant extract for aluminum specimen corrosion in 1 M HCl were analyzed using polarization studies and electrochemical impedance studies, which clearly showed a mixed-type inhibitor. UV-visible spectroscopy, Fourier transform infrared (FT-IR), SEM, and EDX revealed the surface morphology in the presence and absence of inhibitor on the metal surface. The results indicated the feasibility of using the P. odaratum plant extract as a corrosion inhibitor in acid environments.     

Environmentally safe corrosion inhibition of Mg–Al–Zn alloy in chloride free neutral solutions by amino acids

The corrosion inhibition of Mg–Al–Zn alloy was investigated in stagnant naturally aerated chloride free neutral solutions using amino acids as environmentally safe corrosion inhibitors. The corrosion rate was calculated in the absence and presence of the corrosion inhibitor using the polarization technique and electrochemical impedance spectroscopy. The experimental impedance data were fitted to theoretical data according to a proposed electronic circuit model to explain the behavior of the alloy/electrolyte interface under different conditions. The corrosion inhibition process was found to depend on the adsorption of the amino acid molecules on the metal surface. Phenyl alanine has shown remarkably high corrosion inhibition efficiency up to 93% at a concentration of 2 × 10⁻³ mol dm⁻³. The corrosion inhibition efficiency was found to depend on the concentration of the amino acid and its structure. The mechanism of the corrosion inhibition process was discussed and different adsorption isotherms were investigated. The free energy of the adsorption process was calculated for the adsorption of different amino acids on the Mg–Al–Zn alloy and the obtained values reveal a physical adsorption of the inhibitor molecules on the alloy surface.     

Experimental and Quantum Chemical Studies on Corrosion Inhibition Performance of Thiazolidinedione Derivatives for Mild Steel in Hydrochloric Acid Solution

In the present investigation, two thiazolidinedione derivatives, 5-[(2-(3,4,5-trimethoxyphenyl)-6-phenylimidazo[2,1-b][1,3,4]thiadiazol-5-yl)methylidene]-1,3-thiazolidine-2,4-dione (Inh I) and 5-[2-(3,4,5-trimethoxyphenyl)-6-(4-methoxylphenyl)-imidazo[2,1-b][1,3,4]thiadiazol-5-yl)methylidene]-1,3-thiazolidine-2,4-dione (Inh II) were synthesized and investigated as inhibitors for mild steel corrosion in 15% HCl solution using the weight loss, electrochemical polarization, and electrochemical impedance spectroscopy (EIS) techniques. It was found that the inhibition efficiency of these inhibitors increased with increasing concentration. The effect of temperature on the corrosion rate was investigated, and some thermodynamic parameters were calculated. Polarization studies showed that both studied inhibitors were of mixed type in nature. The adsorption of inhibitors on the mild steel surface in acid solution was found to obey the Langmuir adsorption isotherm. Scanning electron microscopy (SEM) was performed on inhibited and uninhibited mild steel samples to characterize the surface. The semi-empirical AM1 method was employed for theoretical calculation of highest (E _HOMO), and lowest unoccupied molecular orbital (E _LUMO) energy levels, energy gap (E _LUMO ? E _HOMO), dipole moment (μ), global hardness (γ), softness (σ), binding energy, molecular surface area, chemical potential (Pi), and the fraction of electrons transferred from the inhibitor molecule to the metal surface (ΔN). The results were found to be consistent with the experimental findings.     

Inhibition of Steel Corrosion in Nitric Acid by Sulfur Containing Compounds

The inhibitive mechanism, thermodynamics, and adsorptive properties of thiobarbituric acid (TBA) and thiourea (TU) on the corrosion of mild steel in 0.5 M HNO₃ solution have been investigated using potentiodynamic, electrochemical impedance spectroscopy techniques, and quantum chemical calculations. Both inhibitors showed good inhibition efficiency in nitric acid solution. TU was the most effective inhibitor and its inhibition efficiency increases with increasing concentration to attain 99% at 6 × 10^?3 mol · L^?1 at 30°C. Theoretical fitting of different isotherms, Langmuir, Flory–Huggins, Temkin, and the kinetic-thermodynamic models were tested to clarify the nature of inhibitors adsorption on mild steel surface. The obtained experimental data fitted all the applied adsorption isotherms except Langmuir. The thermodynamic activation parameters were determined to provide evidence of the inhibitory effect of TBA and TU. To determine the surface charge at the steel surface in nitric acid solution the potential of zero charge was measured using AC measurements at different potentials. Quantum chemical parameters were calculated and explained. The data clarified that the inhibition of steel in nitric acid by TU or TBA takes place through physicochemical adsorption mechanism.     

Electrochemical study on the effect of bipyridine dicarboxylic acid and its cobalt complex on the corrosion behaviour of carbon steel in acidic medium

The 2,2′-bipyridine-3,3′-dicarboxylic acid (bida) and its cobalt complex (Co-bida) were tested as corrosion inhibitors for N80 carbon steel in sulphuric acid solution by electrochemical polarization and electrochemical impedance spectroscopy method. The results indicate that the complex and ligand inhibit the corrosion of mild steel in H₂SO₄ solutions and the extent of inhibition increases with inhibitor concentration and decreases with temperature. The inhibition efficiency of the inhibitors follows the trend Co-bida > bida. A mixed-inhibition mechanism is proposed for the inhibitive effects of the compounds. The adsorption characteristics of the inhibitors were approximated by Temkin isotherm. Morphological study of the carbon steel electrode surface was undertaken by scanning electron microscope and the interfacial species formed on the surface in the presence of inhibitors analyzed by infrared spectroscopy.     

Investigation of some oleochemicals as green inhibitors on mild steel corrosion in sulfuric acid

The inhibitive effect of four oleo chemicals (namely; 2-Pentadecyl-1,3-imidazoline (PDI), 2-Undecyl-1,3-imidazoline (UDI), 2-Heptadecyl-1,3-imidazoline (HDI), 2-Nonyl-1,3-imidazoline (NI)), regarded as green inhibitors, were studied for the corrosion protection of mild steel in 0.5 M H₂SO₄. The methods employed were weight loss, potentiodynamic polarization and electrochemical impedance techniques. Scanning electron microscopy (SEM) was carried out on the inhibited and uninhibited metal samples to characterize the surface. The purity of synthesized inhibitors was checked by FT-IR and NMR studies. The inhibition efficiency increased with increase in inhibitor concentration, immersion time and decreased with increase in solution temperature. No significant change in IE values was observed with increase in acid concentration. The best performance was obtained for UDI possessing 96.2% inhibition efficiency at 500 ppm concentration. The adsorption of the compounds on the mild steel surface in the presence of sulfuric acid obeyed Langmuir’s adsorption isotherm. The values obtained for free energy of adsorption and heats of adsorption suggest physical adsorption. The addition of inhibitor decreased the entropy of activation suggesting that the inhibitors are more orderly arranged along the mild steel surface. The potentiodynamic polarization data indicate mixed control. The electrochemical impedance study further confirms the formation of a protective layer on the mild steel surface through the inhibitor adsorption.     

Corrosion inhibition of mild steel in 1 M HCl using Tamarindus indica extract: electrochemical,surface and spectroscopic studies

Abstract

We report, here, the corrosion inhibition of mild steel specimen in 1?M HCl by tamarind fruit pulp aqueous (TFPA) extract. The inhibition property in the presence of TFPA extract is studied using weight loss, polarization measurement and electrochemical impedance spectroscopy (EIS). The inhibitor efficiency is found to vary from 74% to 88% (weight loss method) with TFPA concentration of 100–600?ppm. The reduction in Tafel slopes shows that TFPA acts as a mixed-type inhibitor. The adsorption of the inhibitor on the metal surface follows Langmuir isotherm. The standard Gibbs free energy of adsorption value of –40?kJ/mol suggests the chemisorption of inhibitor molecules via coordinate bond. AFM results exhibit a decrease in the surface roughness of mild steel, exposed to 1?M HCl from 299?±?12 to 154?±?6.6?nm, with increasing concentration of inhibitor from 0 to 600?ppm due to the uniform coverage of inhibitor molecules on the metal surface. X-ray photoelectron spectroscopy de-convoluted high resolution profiles of C 1?s (carbon) for mild steel exposed to 1?M HCl with 600?ppm inhibitor show major peaks corresponding to sp³ C–C/C–H (284.9?eV) and oxygen bondings in C–OH, C=O, COOH with a binding energy of 285.9, 286.9, 288.5?eV, respectively, thereby confirming the adsorption of organic moieties on mild steel surface. Fourier transform infrared spectroscopy further confirms the adsorption of inhibitor molecules on the metal surface. Therefore, tamarind fruit pulp extract is a potential corrosion inhibitor for mild steel, which is cost-effective, green and non-toxic.