共查询到18条相似文献,搜索用时 187 毫秒
1.
针对电子设备工程结构设计中的随机振动问题,文中介绍了一种ATR安装架的结构设计和优化方法,并利用仿真软件对安装架在规定的条件下进行了模态分析和随机振动分析,然后在分析的基础上对安装架结构进行了优化设计,确保ATR安装架满足环境条件。 相似文献
2.
基于MD.Nastran有限元分析软件,提出了某型机载雷达机箱的有限元建模方法,并对其分别进行了过载、模态和随机振动仿真分析.模态分析时采用Block lanczos方法求解了机箱的前十阶固有频率和振型.随机振动分析得出了各SRU(内场可更换单元)模块对基础激励的振动响应情况.仿真结果对该机箱的后续结构优化、减重设计有... 相似文献
3.
4.
5.
星载电子设备宽频随机振动响应分析 总被引:2,自引:0,他引:2
首先讨论了星载电子设备有限元建模技术,包括机箱、电路板、元器件模型以及单元细化准则;然后进行模态分析,通过有效模态质量来确定提取模态数;最后进行随机振动响应分析,得到了整机的加速度均方根值分布云图和电路板上某点的加速度功率谱密度,与试验结果基本一致。 相似文献
6.
《机械工程与自动化》2016,(5)
简要介绍了机箱机柜生产中的传统铆接方式,对比分析了自冲铆接的技术特点及性能优势,重点阐述了自冲铆接技术在机箱机柜生产中的工艺设计原则和常用铆接参数,对目前存在的问题进行分析并给出了解决方法。 相似文献
7.
使用某无人直升机振动环境谱对其设备平台进行随机振动分析。通过能量相等法将某无人直升机的随机加正弦振动环境谱转化成宽带加窄带随机振动谱,对设备平台进行三维和有限元建模,基于ANSYS Workbench对其进行模态分析以及振动环境谱下的随机振动分析,得到了设备平台的模态频率、动强度和位移响应值。为设备平台在某型机上的安装提供了设计支撑。 相似文献
8.
KRG过程仪表机柜系统为核岛核辅重要的信号处理系统,本文简要介绍了秦山核电2期扩建工程KRG系统功能和电源分配结构。本文对KRG过程仪表机柜系统日常运行中出现的机柜电源机箱故障问题,进行了详细阐述、分析和总结。同时,针对这些问题提出了相应的电源机箱维护优化措施,对秦山二期扩建工程及其他类似电站都有很大的意义。 相似文献
9.
以传统的减振器减振机箱为基础,对新型的泡沫铝材料进行研究设计出泡沫铝减振机箱.基于随机振动理论,利用有限元法对减振器减振机箱和泡沫铝减振机箱开展随机振动分析,将其力学性能进行了对比得出泡沫铝减振机箱其加速度均方根值减小量达39.6%.新型泡沫铝减振机箱比减振器减振机箱可更好的降低外界对电子设备的动态影响,提高了设备的可靠性. 相似文献
10.
11.
12.
悬置系统设计的核心是合理设计悬置元件的位置、角度和刚度,以提高悬置系统各向谐振模态解耦度,并使各向自振频率分别避开发动机怠速频率、车架、车身各向自振频率等,从而提高悬置系统的隔振效果。在悬置系统模态分析的基础上,建立了以提高悬置系统解耦度和各向谐振频率尽可能接近期望值为目标的悬置系统自动优化设计数学模型,并以某发动机动力总成悬置系统为应用案例,对其悬置元件的位置、角度和刚度进行自动优化设计计算,获得了预期的优化效果。 相似文献
13.
14.
15.
16.
The design strategies for powertrain mounting systems play an important role in the reduction of vehicular vibration and noise. As stiffness and damping elements connecting the transmission system and vehicle body, the rubber mount exhibits better vibration isolation performance than the rigid connection. This paper presents a complete design process of the mounting system, including the vibration decoupling, vibration simulation analysis, topology optimization, and experimental verification. Based on the 6?degrees?of?freedom vibration coupling model of the powertrain mounting system, an optimization algorithm is used to extract the best design parameters of each mount, thus rendering the mounting system fully decoupled and the natural frequency well configured, and the optimal parameters are used to design the mounting system. Subsequently, vibration simulation analysis is applied to the mounting system, considering both transmission and road excitations. According to the results of finite element analysis, the topological structure of the metal frame of the front mount is optimized to improve the strength and dynamic characteristics of the mounting system. Finally, the vibration bench test is used to verify the availability of the optimization design with the analysis of acceleration response and vibration transmissibility of the mounting system. The results show that the vibration isolation performance of the mounting system can be improved effectively using the vibration optimal decoupling method, and the structural modification of the metal frame can well promote the dynamic characteristics of the mounting system. 相似文献
17.
动力总成是汽车的主要振源,设计一套良好的动力总成隔振悬置系统是获得整车良好振动噪声特性的主要任务之一。悬置系统的设计优化、解耦程度的评价及其固有频率与汽车其他子系统之间的合理匹配,一般都基于动力总成-悬置的简化子系统进行。系统简化必然引入一定的误差,因此有必要对设计结果进行修正。基于动力总成-悬置-车身-悬架系统的垂向振动全模型,详细分析了作为动力总成基础的车身质量以及悬架刚度对动力总成固有频率的影响规律,指出了动力总成-悬置简化子系统的设计分析结果的修正方法,阐释了自由-自由模态测试中悬吊刚度对模态频率测试结果的影响规律以及耦合系统对各子系统固有频率的影响规律。这些结论对汽车动力总成隔振降噪的设计开发及试验验证具有较好的理论和工程指导意义。 相似文献